hi guys,here i am again with troubles i installed merruk kernel and hyperion 8 rom and after like a week or so my phone started to lag hard if i open a toms hardware page in opera (because my pc is toast at the moment so no odin available) until the page loads the whole phone is almost frozen even the statusbar lags,if i try watching a video in mx player it plays the video a few seconds without sound then freezes and plays the song for that part of the video that has been played then lags then no sound then again,with the stock kernel i had no problems browsing before the page not fully loaded or watching videos,and in youtube sometimes i hear the sound like that exact half a second is being played really fast 5 times, you know what i mean,should i go back to stock? i had xxkk6 kernel and can somebody send me a stock xxkk6 kernel file that i can flash in cwm? Please guys im kinda desperate here what kernel should i try? I have to do something
Sent from my GT-S5360 using xda app-developers app
Merruk is unstable so I recommend you to flash hells fusion #50.
Am i gonna have any trouble with hells fusion over merruk?i installed merruk after savie that came with my rom,then i just reflashed my rom without the boot.img,i disabled some thing i messed with in developer options something about forcing gpu rendering on 2d stuff,and now my phone acts normally but i still dont know how to use the cpu governors and that crap makes my phone lag more than fully stock so can you suggest some settings?,and in hells fusion am i gonna feel the absence of 1.2ghz? i think i asked to many questions in this reply but im a noob and i was plesantly surprized that i followed a guide and i didnt brick my phone at all while flashing
Sent from my GT-S5360 using xda app-developers app
renyn21 said:
Am i gonna have any trouble with hells fusion over merruk?i installed merruk after savie that came with my rom,then i just reflashed my rom without the boot.img,i disabled some thing i messed with in developer options something about forcing gpu rendering on 2d stuff,and now my phone acts normally but i still dont know how to use the cpu governors and that crap makes my phone lag more than fully stock so can you suggest some settings?,and in hells fusion am i gonna feel the absence of 1.2ghz? i think i asked to many questions in this reply but im a noob and i was plesantly surprized that i followed a guide and i didnt brick my phone at all while flashing
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Just flash hells fusion #50, its stable. Set smartassv2 as your governor and you're done!
Sent from my GT-I8190 using xda app-developers app
renyn21 said:
Am i gonna have any trouble with hells fusion over merruk?i installed merruk after savie that came with my rom,then i just reflashed my rom without the boot.img,i disabled some thing i messed with in developer options something about forcing gpu rendering on 2d stuff,and now my phone acts normally but i still dont know how to use the cpu governors and that crap makes my phone lag more than fully stock so can you suggest some settings?,and in hells fusion am i gonna feel the absence of 1.2ghz? i think i asked to many questions in this reply but im a noob and i was plesantly surprized that i followed a guide and i didnt brick my phone at all while flashing
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Currently there is no stable OC for this device.Hells fusion is not an overclocked kernel.
Guuuys i bricked my phone after i tried to flash stock kernel with hells fusion #50 ,you know what i mean, and now any recovery stock or cwm cant mount or acces anything except the sd card so cant reflash anything, im desperate here,and i tried odin and everytime i try flashing stock with odin it stops at boot.img and does nothing, what can i do????:banghead:
Sent from my mom's GT-P5100 using xda app-developers app
renyn21 said:
Guuuys i bricked my phone after i tried to flash stock kernel with hells fusion #50 ,you know what i mean, and now any recovery stock or cwm cant mount or acces anything except the sd card so cant reflash anything, im desperate here,and i tried odin and everytime i try flashing stock with odin it stops at boot.img and does nothing, what can i do????:banghead:
Sent from my mom's GT-P5100 using xda app-developers app
Click to expand...
Click to collapse
Wipe data and cache if u can reach recovery mode and then try rebooting..
The thing is i couldnt mount anything so wiping anything would just give an error,but i used odin,it was stuck at something like bcmtp (i think) and then i disconected it and voila it worked
Sent from my GT-S5360 using xda app-developers app
Related
hello fellows i have a serious problem here!! i was trying to put the Darky's v9.3 Extreme Edition on my SGS movistar spain, and after i install Kernel SpeedmodK13C with odin the touch screen stop working but the buttons works fine :S!!! i wipe the phone and nothing happens.... i think is a fixeable thing but i dont know what to do X_X pls help me
First thing to try is reflashing 9 times out of 10 that will fix u up also try voodoo kernel instead of speedmod might make a difference i use voodoo myself but only cuz it was loaded with the rom first
Sent from my GT-I9000 using Tapatalk
rudeboy150 said:
First thing to try is reflashing 9 times out of 10 that will fix u up also try voodoo kernel instead of speedmod might make a difference i use voodoo myself but only cuz it was loaded with the rom first
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
omg men u save my life literaly :') i succes on install the Darky's rom xtreme edition but the menu is the same as the froyo 2.2 :/ i thought it'll be more likely to the 2.3 gingerbread ... is there a way to have that menu style?
Glad I helped as for the ginger bread im not to sure I'd have a look around
Sent from my GT-I9000 using Tapatalk
download gingerbread launcher from the market. its free
sounds lik you installed the wrong version of speedmod kernel there is one from the i9000 models and one for the captivate.. the touch button drivers are diffeent and the symptoms you describe would be what happen if you install wrong kernel.
I installed the jellyblast v3 rom which includes kuro kernel into my gts5360... after i manually flashed the 2nd OTA update using clockwormod the status bar was gne.. also couldnt see caller screen... so i instaleed my stock rom which was backed up using CWM... bt the kernel is still kuro kernel... nw i wnt to install jellyblast v3 rom again... bt should i install it directly using CWM on kuro kernel???
coz the description in the thread says it requires stock kernel... also if can someone tell me hw to flash merruk kernel after flashing jellyblast...???
sumic17 said:
I installed the jellyblast v3 rom which includes kuro kernel into my gts5360... after i manually flashed the 2nd OTA update using clockwormod the status bar was gne.. also couldnt see caller screen... so i instaleed my stock rom which was backed up using CWM... bt the kernel is still kuro kernel... nw i wnt to install jellyblast v3 rom again... bt should i install it directly using CWM on kuro kernel???
coz the description in the thread says it requires stock kernel... also if can someone tell me hw to flash merruk kernel after flashing jellyblast...???
Click to expand...
Click to collapse
try flashing jb3 widout flashing stock kernal...if it does'nt works try it with stock kernel....and abit merruks....go to the thread...u will find many post on how to flash merruks kernel
Sent from my GT-S5360 using xda app-developers app
anmolsharma1293 said:
try flashing jb3 widout flashing stock kernal...if it does'nt works try it with stock kernel....and abit merruks....go to the thread...u will find many post on how to flash merruks kernel
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
dude d prob is that i hv nly 1 phn... nd if its gne.. den i wud b helpless... it wud b kind enuf if u tell me a cnfrmed method...
sumic17 said:
dude d prob is that i hv nly 1 phn... nd if its gne.. den i wud b helpless... it wud b kind enuf if u tell me a cnfrmed method...
Click to expand...
Click to collapse
I think as u r already having kuros kernel than u dont have 2 go back 2 stock kernel....just flash jb v3.0.2
Or u can go to safe way jus by flashing stock kernel and than jb v3....
Sent from my GT-S5360 using xda app-developers app
Kuro kernel = stock + battery saver + awesomw
Globally recognised and certified NOOB
anmolsharma1293 said:
I think as u r already having kuros kernel than u dont have 2 go back 2 stock kernel....just flash jb v3.0.2
Or u can go to safe way jus by flashing stock kernel and than jb v3....
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
kk.. vil c...
Finally flashed jbv3 thanks anmol sharma
Sent from my GT-S5360 using xda app-developers app
Can i get bck my stock kernel by flashing stock rom via odin from sir doky's thread????
Sent from my GT-S5360 using xda app-developers app
sumic17 said:
Can i get bck my stock kernel by flashing stock rom via odin from sir doky's thread????
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
yes u can get back stock kernel by flashing via odin
or u can jst flash stock "boot.img" via kernel flasher to get back ur stock kernel
10% battery or lower problem
hi.. can i ask what can i do with my problem on jbv3.. when my battery is 10% or lower, the screen is just black.. can someone help me..
Jellyblast is an awesome custom rom!! pls help thanks
yabs0423 said:
hi.. can i ask what can i do with my problem on jbv3.. when my battery is 10% or lower, the screen is just black.. can someone help me..
Jellyblast is an awesome custom rom!! pls help thanks
Click to expand...
Click to collapse
Is your screen totally black or a little bit luminous? Because it is normal that the screen darkens when the battery is low for save it.
Can i install JELLYBLAST V3 on my samsung galaxy y GT-S5360L ?
i have flash ota3, but at cpu spy i cannot see the state. i use merruk kernel 2.5 #206
one more my RAM is reduce to 249MB.
how it happen, anyone can help me?
Not really... My jelly blast is MOST awesome with repencis kernel. It was good with kuro, awesome with repencis. Repencis works without lag even in max 312ghz, min 156 ghz. Really good.
All your cheese belongs to ME!
Rcain said:
Not really... My jelly blast is MOST awesome with repencis kernel. It was good with kuro, awesome with repencis. Repencis works without lag even in max 312ghz, min 156 ghz. Really good.
All your cheese belongs to ME!
Click to expand...
Click to collapse
can i change kernel from merruk to repencis? how bout backup can it restore in repencis kernel?
Don't use merruk kernel 2.5, if you really want merruk kernel, use merruk 2.0 elite version. Even after bacem tweaks the over clocking doesn't really work. It just wouldn't stay up at 1.24 ghz. But the best kernel for Jb v3 is still repencis
All your cheese belongs to ME!
Rcain said:
Don't use merruk kernel 2.5, if you really want merruk kernel, use merruk 2.0 elite version. Even after bacem tweaks the over clocking doesn't really work. It just wouldn't stay up at 1.24 ghz. But the best kernel for Jb v3 is still repencis
All your cheese belongs to ME!
Click to expand...
Click to collapse
thanks a lot, can you give me link to install repencis kernel?
http://forum.xda-developers.com/showthread.php?t=1945621
[Update] [KERNEL] Repencis Kernel [TOOL] ext4 Converter
The installation is a little bit hard though. Remember to back up through cwm before flashing.
All your cheese belongs to ME!
Rcain said:
Not really... My jelly blast is MOST awesome with repencis kernel. It was good with kuro, awesome with repencis. Repencis works without lag even in max 312ghz, min 156 ghz. Really good.
All your cheese belongs to ME!
Click to expand...
Click to collapse
I agree with u man.. im using jellyblast + repencis = awesome!!
Rcain said:
http://forum.xda-developers.com/showthread.php?t=1945621
[Update] [KERNEL] Repencis Kernel [TOOL] ext4 Converter
The installation is a little bit hard though. Remember to back up through cwm before flashing.
All your cheese belongs to ME!
Click to expand...
Click to collapse
:good: ive install repencis kernel, all good, but youtube fc hmmm
hey guys i am using repencis rom 3.5 on my galaxy y........its amazing nd stuff but wen i used to use my stock rom i had overclocked my phone and also increased internal memory space using link2sd.....these two things i'm not able to do on this repencis rom 3.5 as the phone hangs during process when i follow the standard procedure for overclock nd increase memory space...plssssss help i'm confused
Sharran said:
Hey....guys i installed repencis rom 3.5 for galaxy y......it's kinda great.....but one problem....i dunno how to overclock my phone on this new custom rom.....i tried the same overclock procedure that i tried wen i had my stock rom but the phone did not start up on this new rom during boot process...please help urgent??????
Click to expand...
Click to collapse
I am very sorry to inform you that Repensis Kernel doesn't support overclocking. If you want an overclock kernel, try Merruk Technology Kernel V2.5. Else, flash Savie's Kernel and overclock it the way you did so. Merruk kernel v2.5 is already overclock to 1.2 GHz. You don't need to flash overclock zip again. But Savie kernel is not yet overclock. You need to flash the overclock zip file to overclock it to 900MHz. Only Stock kernel, merruk kernel and savie kernel supports overclocking till date of all the available kernels for Galaxy Y. Always keep in mind that overclocking drains the battery and heats up the phone which can cause damage to your handset. Just reflash Repensis Rom v3.5 via Clockwork Mode Recovery or via Stock Recovery. As to Link2sd, first partition you sdcard as primary in ext2 format. When link2sd ask you to choose the format, select ext4(very important) and then reboot you phone.
Hit thanks if I helped you.
Sent from my GT-S5360 using xda premium
Firstly why are you making 2 threads of the same topic.
Secondly post question in q&a section and use the search tool.
Sent from my GT-S5360 using xda premium
Thread Closed, please refer to the first thread the OP made.
Hey Guys Pls Help Me
I Have used ManY Roms
Creed ,Cod,USSR8 ,etc
Now I'm On Jelly Blast V3 awesome
Rom ..
But When I Flash the Merruk Kernel
Delux Or
Any other kernel
My phone Does not Boots
Can u Please help me guysz:::
Cool.yash17 said:
Hey Guys Pls Help Me
I Have used ManY Roms
Creed ,Cod,USSR8 ,etc
Now I'm On Jelly Blast V3 awesome
Rom ..
But When I Flash the Merruk Kernel
Delux Or
Any other kernel
My phone Does not Boots
Can u Please help me guysz:::
Click to expand...
Click to collapse
Which kernel did u flash and how? plz tell me the detail. By the way Merruk kernel is very unstable. I recomment u not to use it.
Some roms do not function with kernels other than those included in the rom..
Also you must follow proper instructions to flash kernel
one thing more... After flashing merruks kernel you have yo flash ext4 convertor
it will convert your /data /system and /cache tp ext4 which is not supported by some kernels and rom dont boot
Thank You Guys For Replying A Noob
Heys
Guys
Thanks Lot both Of You
Can U Recommend a kernel For me
I'm Using Jelly last v3
Cool.yash17 said:
Heys
Guys
Thanks Lot both Of You
Can U Recommend a kernel For me
I'm Using Jelly last v3
Click to expand...
Click to collapse
I recomment u to use savie or kuro best for battery saving as well as good performance . search for it in the forum.
Dont say merruk kernel is very unstable....
Say that u dont know how to flash it properly and use it...
Sent from my GT-S5360 using xda app-developers app
anmolsharma1293 said:
Dont say merruk kernel is very unstable....
Say that u dont know how to flash it properly and use it...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
I don`t think i have said any wrong thing that u are trying to insult me saying
anmolsharma1293 said:
Dont say merruk kernel is very unstable....
Say that u dont know how to flash it properly and use it...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
That was really rude bro.
I mean to say it`s for advanced users. Becoz to install it successfully without any errors is difficult for one who is new to such stuffs.But one can easily flash
other kernels like savie,kuro,hells fusion etc following simple steps.
By the way for ur kind information i have once successfully installed the Merruk Kernel but changed becoz it was power hungry
samir basnet said:
I don`t think i have said any wrong thing that u are trying to insult me saying
That was really rude bro.
I mean to say it`s for advanced users. Becoz to install it successfully without any errors is difficult for one who is new to such stuffs.But one can easily flash
other kernels like savie,kuro,hells fusion etc following simple steps.
By the way for ur kind information i have once successfully installed the Merruk Kernel but changed becoz it was power hungry
Click to expand...
Click to collapse
yep merruk is for advance users so this saturday i am going to flash it tooo...lolz
Cool.yash17 said:
Heys
Guys
Thanks Lot both Of You
Can U Recommend a kernel For me
I'm Using Jelly last v3
Click to expand...
Click to collapse
When i used JBv3 i was flashed White 1.2.0 kernel nd its working fine but i'v got a different problem with JB
Hi
I am new to this and recently installed franco kernel on 4.3 Jelly Bean. I was wondering how do I change to Trinity kernel from TWRP menu I have installed on Nexus 4. I understand that I need Zip and then from TWRP I can install, but can anyone you has done it advice me?
I am looking for what I need to do in TWRP?
I am looking whether I need to go back to stock Google Kernel?
xthaparian said:
Hi
I am new to this and recently installed franco kernel on 4.3 Jelly Bean. I was wondering how do I change to Trinity kernel from TWRP menu I have installed on Nexus 4. I understand that I need Zip and then from TWRP I can install, but can anyone you has done it advice me?
I am looking for what I need to do in TWRP?
I am looking whether I need to go back to stock Google Kernel?
Click to expand...
Click to collapse
since you are coming from franco kernel, this is what you should do, via your recovery..
after you download what you need, reflash your rom(dont wipe a singe thing), the gapps(if needed), and then trinity kernel. then reboot. if you are coming from any other kernel, you dont need to reflash your rom, just flash the kernel in recovery then reboot
Thanks a lot
So in this case I should just install trinity kernel as I don't have any custom rom installed and no gapps. I hope I am right as all I did was just installed Franco kernel on stock phone and that's it!
Any cache erase etc etc before i flash new kernel?
Sent from my Nexus 4 using xda app-developers app
xthaparian said:
Thanks a lot
So in this case I should just install trinity kernel as I don't have any custom rom installed and no gapps. I hope I am right as all I did was just installed Franco kernel on stock phone and that's it!
Any cache erase etc etc before i flash new kernel?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
no matter what anyone tells you, you NEVER have to wipe anything when flashing kernels, dont wipe dalvik, dont wipe cache.
well, its best to flash your rom again if coming from franco kernel, it changes your roms ramdisk. trinity grabs the available ramdisk. by reflashing your rom, trinity would grab your roms ramdisk instead of francos. but, most likely youll be fine just flashing trinity on top
Thanks again
When you say ROM, are you referring to stock ROM?
I guess I'm getting confused between which ROM you are asking me to reflash.
Sent from my Nexus 4 using xda app-developers app
xthaparian said:
Thanks again
When you say ROM, are you referring to stock ROM?
I guess I'm getting confused between which ROM you are asking me to reflash.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
stock rom. its aright if you dont reflash, youll be fine.
xthaparian said:
Hi
I am new to this and recently installed franco kernel on 4.3 Jelly Bean. I was wondering how do I change to Trinity kernel from TWRP menu I have installed on Nexus 4. I understand that I need Zip and then from TWRP I can install, but can anyone you has done it advice me?
I am looking for what I need to do in TWRP?
I am looking whether I need to go back to stock Google Kernel?
Click to expand...
Click to collapse
xthaparian, can I ask you to share your experience when you do it?
I'm exactly where you are, stock ROM (4.2.2) and Franco's. It's not that I'm not satisfied with it, just wanting to try alternatives. After being a "ROM whore" with my previous phones I unfortunately didn't have time to do anything with the N4 yet..
Thanks =)
Sent from my Nexus 4
I'll keep you guys updated..
Give me 2 hours
Sent from my Nexus 4 using xda app-developers app
OK here is the update, I never got around to install it because I think there is no 4.3 kernel available as yet. All is see is a kernel for 4.2.2
If I am wrong then someone point me to 4.3 kernel for Trinity
Sent from my Nexus 4 using xda app-developers app
xthaparian said:
OK here is the update, I never got around to install it because I think there is no 4.3 kernel available as yet. All is see is a kernel for 4.2.2
If I am wrong then someone point me to 4.3 kernel for Trinity
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
tf4c http://goo.gl/hONIdT
i do all of trinitys testing, morfic(dev) doesnt have a nexus 4. this is the kernel that we are testing in the thread right now, publicly. the release kernel goes on the website. the test kernels deemed fit for the public ill post in the thread, and/or my social websites. if you cant find the latest, or have any other questions(even not kernel related), feel free to ask, we are very friendly in the trinity thread
Ooh
Installed it from twrp without wiping cache etc and installed good.
But screen flickers like really bad and not at all buttery smooth...
Any ideas?
Sent from my Nexus 4 using xda app-developers app
xthaparian said:
Ooh
Installed it from twrp without wiping cache etc and installed good.
But screen flickers like really bad and not at all buttery smooth...
Any ideas?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
go to the roms main settings, developer options, force gpu rendering, disable the disable hw overlays if they are enabled. if you dont have a developer options in your main settings, press about phone, scroll down, press build number 7 times. when you get the you are a developer now message, go back to the main settings and go into developer options.
the reason this happens is because you are running stock, which is jwr(build version) and aosp is jss. they are slightly different(some different drivers). this difference cause this. most custom kernels are jss, aosp based. franco kernel is jwr, stock based. this difference does not happen often on a nexus. btw, jss is the newest version of android. the majority of custom roms are also jss.
OK this is what I have done
I have dine as you had told and checked the box that states "disable the he overlays"
This fixed my problem but I hope this doesn't have any other effect ..
How can I install the aosp built instead of jwr ?
Sent from my Nexus 4 using xda app-developers app
xthaparian said:
OK this is what I have done
I have dine as you had told and checked the box that states "disable the he overlays"
This fixed my problem but I hope this doesn't have any other effect ..
How can I install the aosp built instead of jwr ?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
na, thats how i normally run my phone. there are many aosp builds out there in both development sections, as i said most are aosp. im using rasbean, but there are other good aosp based roms as well
Thanks a lot all!..
this seems to work.
One last thing i like to inquire is that to install the raspberry, they recommend clean wipe and then install gapps and rom. Would this erase my current backup of franco based system image i created in TWRP?
And If I wipe clean, how can I install the raspberry rom ..its all wiped isnt it!!!
Thanks @xthaparian and @simms22, I had already decided to take this weekend to try some stuff on mine, but your tries made me more forward to do it. I must confess of all my past androids N4 is, for obvious reasons, the one which has more releases to try, and ofc a lot of tricks in the way..
Sent from my Nexus 4
xthaparian said:
Thanks a lot all!..
this seems to work.
One last thing i like to inquire is that to install the raspberry, they recommend clean wipe and then install gapps and rom. Would this erase my current backup of franco based system image i created in TWRP?
And If I wipe clean, how can I install the raspberry rom ..its all wiped isnt it!!!
Click to expand...
Click to collapse
rasbean jelly! :silly:
no, your nandroid backup stays, your data gets erased though. its like starting fresh. the storage wont get touched(dont wipe the system). as soon as you log in, go through the google setup, your play store apps should start reinstalling(if you enable it). most roms will jave this or something similar written in the op.
Ok Thanks again..
BTW which gapps should I use!...
i found a link on the internet
http://www.teamandroid.com/gapps/
but simms22 your input shall be the final thing to close the thread..
xthaparian said:
Ok Thanks again..
BTW which gapps should I use!...
i found a link on the internet
http://www.teamandroid.com/gapps/
but simms22 your input shall be the final thing to close the thread..
Click to expand...
Click to collapse
i hear people say these gapps for 4.3 are good, they were recently updated(8/8/13) http://goo.im/devs/paranoidandroid/roms/gapps/pa_gapps-full-4.3-20130808-signed.zip
also, you will need the latest supersu/superuser. heres the flashable supersu http://download.chainfire.eu/345/SuperSU/UPDATE-SuperSU-v1.51.zip
I downloaded all as instructed ..
I am on raspberry
I'm on trinity kernel
Let's see the performance .
One thing I noticed is that this kernel jas all 4 cores running and max is capped at 1024hz.
Also the governor is set to ondemand.
Any thoughts on this. Any other tweaks I should do to make it much better. Franco kernel was using interactive governor.
Also the GPU is ocd to 485 and stock is 400 max.
Any comments to tweak the kernel better or Tue stock setting are good!
Thanks for help
Sent from my Nexus 4 using xda app-developers app