Related
I did research for this for a couple of hours but didn't find anything too helpful besides flashing back to stock. I also saw I could install the TWRP img file by the command line but that makes me a little nervous for the brick warnings posted.
I have the Goldeneye rom on my phone and I had TWRP 2.5.0.2 and everything was working great. I also updated the Modem to the MF3 one. I flashed TWRP up to 2.6 and loki-doki and everything seemed to go OK until I rebooted the phone.
I rebooted the phone and got the error of System software not authorized by ATT has been found on your phone and the SECURE FAIL: KERNEL message at the top.
I am now unable to boot into recovery with the buttons or using the reboot menu from the Goldeneye rom. Every time I try to reboot it goes to the error message above.
Now I am able to have the phone boot up fully if I go into download mode and then press the volume down key to cancel/restart the phone and then it will boot up with out issue. Any time I reboot though with out going into download mode I get the secure kernel error.
Is there a way to recover the device without going through ODIN and reflashing it back to stock? Also, my baseband shows MF3 now since I flashed the modem, is that going to cause any issues?
Any advice would be appreciated. Thanks
Can you try reinstalling the twrp recovery through goomanager when you get it to boot.. Then retrying to get into recovery?
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
bump
Sent from my SAMSUNG-SGH-I337 using xda premium
rcklss1 said:
Can you try reinstalling the twrp recovery through goomanager when you get it to boot.. Then retrying to get into recovery?
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I go to install OpenRecoveyScript in goomanager and it tells me that no recoveries were found for my device
lyrad12 said:
bump
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Why are you bumping this--
---------- Post added at 11:52 PM ---------- Previous post was at 11:47 PM ----------
dibe said:
I go to install OpenRecoveyScript in goomanager and it tells me that no recoveries were found for my device
Click to expand...
Click to collapse
Why not Odin
I haven't looked for awhile, but if you example of command to put recovery on phone by adb, try it. If you have the command line from a dev thread then just copy/paste the line. No chance of typing error. Still double check all. And any bu's you can do prior, do them and put copy on pc. Know you can't nandroid, but maybe MyBackUp Pro.
I was hoping there was something I could do to retain the setup on the phone how it is.
I'll push the twrp file using the command line and if that doesn't work I will flash with odin
dibe said:
I was hoping there was something I could do to retain the setup on the phone how it is.
I'll push the twrp file using the command line and if that doesn't work I will flash with odin
Click to expand...
Click to collapse
Good Luck--:good:
dibe said:
I was hoping there was something I could do to retain the setup on the phone how it is.
I'll push the twrp file using the command line and if that doesn't work I will flash with odin
Click to expand...
Click to collapse
Lol, odin is much easier.
Sent from my HTC One X using xda premium
rugmankc said:
Good Luck--:good:
Click to expand...
Click to collapse
Thanks.
I installed the TWRP 2.5.0.2 img file using Android Terminal Emulator and the command line. Everything is working fine now with the phone and I didn't have to reflash or lose any data.
Thanks for everyone's help.
convict_moody said:
Lol, odin is much easier.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Odin is last resort for me since you lose everything--
---------- Post added at 02:47 AM ---------- Previous post was at 02:46 AM ----------
dibe said:
Thanks.
I installed the TWRP 2.5.0.2 img file using Android Terminal Emulator and the command line. Everything is working fine now with the phone and I didn't have to reflash or lose any data.
Thanks for everyone's help.
Click to expand...
Click to collapse
Glad you got it--:good:
rugmankc said:
Odin is last resort for me since you lose everything--
I would have to fully agree with you there. I am very glad installing the img worked.
Click to expand...
Click to collapse
hey I want to update my N4 from Pa 3.69 to 3.92 I've downloaded the files for the rom,gapps,bootloader & radio.
Can someone give an step by step instructions of how to i flash the bootloader,radio,rom & gapps .
thanks for all helpers !
sorry for my bad English .
Go to TWRP recovery and flash this in order:
Bootloader and Radio
Rom
Gapps
Sent from my Nexus 4 using Tapatalk 4
Omer Slomovic said:
hey I want to update my N4 from Pa 3.69 to 3.92 I've downloaded the files for the rom,gapps,bootloader & radio.
Can someone give an step by step instructions of how to i flash the bootloader,radio,rom & gapps .
thanks for all helpers !
sorry for my bad English .
Click to expand...
Click to collapse
Flash the bootloader radio reboot make sure it works OK then factory reset flash ROM and gapps
From my BLACKED OUT N4
andyabc said:
Go to TWRP recovery and flash this in order:
Bootloader and Radio
Rom
Gapps
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
so i just need to flash the bootloader and the radio from the recovery ?
no flashing from fastboot commands or something like that ?
Omer Slomovic said:
so i just need to flash the bootloader and the radio from the recovery ?
no flashing from fastboot commands or something like that ?
Click to expand...
Click to collapse
Personally, I'd just flash them fastboot but that's my personal choice. Then flash the ROM, then GApps, then wipe cache/dalvik and voila - PA 4.3
Omer Slomovic said:
so i just need to flash the bootloader and the radio from the recovery ?
no flashing from fastboot commands or something like that ?
Click to expand...
Click to collapse
Well if you got it from the PA thread then yes.
Sent from my Nexus 4 using Tapatalk 4
andyabc said:
Well if you got it from the PA thread then yes.
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
before that I flash that I tried to do an backup and he keeps tells me FAIL when I go to the restore in twrp I saw non of my backups but when I plugged it to the computer the backups was in the twrp directory so I tried to reboot in to the recovery couple of times and still non of my backups there . Any ideas ??
sorry for my terrible grammar I'm not from america .
Omer Slomovic said:
before that I flash that I tried to do an backup and he keeps tells me FAIL when I go to the restore in twrp I saw non of my backups but when I plugged it to the computer the backups was in the twrp directory so I tried to reboot in to the recovery couple of times and still non of my backups there . Any ideas ??
sorry for my terrible grammar I'm not from america .
Click to expand...
Click to collapse
No worries, I am from the UK anyway.
It looks like it is not reading the directory with "ls", a recovery reflash should fix that.
Sent from my Nexus 4 using Tapatalk 4
andyabc said:
No worries, I am from the UK anyway.
It looks like it is not reading the directory with "ls", a recovery reflash should fix that.
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
well i try it tomorrow .
and I'm from Isreal
still not work
andyabc said:
No worries, I am from the UK anyway.
It looks like it is not reading the directory with "ls", a recovery reflash should fix that.
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
Hey I flashed the recovery again and still nothing ..
Any ideas ??
Omer Slomovic said:
Hey I flashed the recovery again and still nothing ..
Any ideas ??
Click to expand...
Click to collapse
What recovery do you have?
Sent from my Nexus 4 using Tapatalk 4
andyabc said:
What recovery do you have?
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
twrp 2.6
Omer Slomovic said:
twrp 2.6
Click to expand...
Click to collapse
A lot of people are getting issues with the latest version of TWRP, can you go to the terminal in TWRP to see if the files are there?
Sent from my Nexus 4 using Tapatalk 4
and please get the new one 3.94. the one before had a major screw up and couldnt be installed.
andyabc said:
A lot of people are getting issues with the latest version of TWRP, can you go to the terminal in TWRP to see if the files are there?
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
they are there . from es file explorer i see them but in recovery not .
molesarecoming said:
and please get the new one 3.94. the one before had a major screw up and couldnt be installed.
Click to expand...
Click to collapse
downloaded the new files ! thanks for updating me .
Omer Slomovic said:
they are there . from es file explorer i see them but in recovery not .
downloaded the new files ! thanks for updating me .
Click to expand...
Click to collapse
You may want to thank Moles for updating you with that, the new PA build is MUCH more stable so that should help alot.
Sent from my Nexus 4 using Tapatalk 4
andyabc said:
You may want to thank Moles for updating you with that, the new PA build is MUCH more stable so that should help alot.
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
just help me i really want the new update
Omer Slomovic said:
just help me i really want the new update
Click to expand...
Click to collapse
Ok, download the zip files from that thread, on TWRP go to ADB Sideload, on your PC do "adb sideload [zip file here]".
Replace the "[zip file here]" to those zip files so you need to flash the bootloader and radio first so you replace that with the name of the zip file which is in the same directory on your PC where you have set the CMD to read from.
Repeat for the rom and Gapps, of course when you get off ADB sideload wipe the device.
Sent from my Nexus 4 using Tapatalk 4
andyabc said:
Ok, download the zip files from that thread, on TWRP go to ADB Sideload, on your PC do "adb sideload [zip file here]".
Replace the "[zip file here]" to those zip files so you need to flash the bootloader and radio first so you replace that with the name of the zip file which is in the same directory on your PC where you have set the CMD to read from.
Repeat for the rom and Gapps, of course when you get off ADB sideload wipe the device.
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
before that I'm doing it i want to unroot and back to stock to get 4.3 ota .
so i got problem in the recovery that i cant see my backups in the recovery but in es file explorer or on my computer when i plugged in i can see my backups.
so I flashed again the recovery and still I don't see my backups .
any ideas ??
Omer Slomovic said:
before that I'm doing it i want to unroot and back to stock to get 4.3 ota .
so i got problem in the recovery that i cant see my backups in the recovery but in es file explorer or on my computer when i plugged in i can see my backups.
so I flashed again the recovery and still I don't see my backups .
any ideas ??
Click to expand...
Click to collapse
Well the directory is hidden to the Recovery somehow which is strange, have you tried mounting in the mounting section in TWRP?
Sent from my Nexus 4 using Tapatalk 4
Has anyone successfully rooted with this latest OTA? Just purchased phone and dying to get back to kitkat.
**Bump**
Sent from my LG-D800 using xda app-developers app
Yep, here's the link to the post in the dev boards:
http://forum.xda-developers.com/showpost.php?p=48256853&postcount=664
I was able to root successfully but not able to flash a recovery.
No recovery for me either hope someone figures it out
Sent from my LG-D800 using XDA Premium 4 mobile app
Not 100% sure, but I think you can use the flash tool to put the old image on, root it, and either flash a non-stock rom or use Titanium Backup to freeze the update app and prevent it from re-updating. You can do a Titanium Backup of your apps first so you don't lose quite everything in the reflash (but be sure to move it to your computer, I think the stock reflash wipes out everything).
daveeckert said:
Yep, here's the link to the post in the dev boards:
http://forum.xda-developers.com/showpost.php?p=48256853&postcount=664[/QUOTE
I think im gonna try to exchange my phone being i just purchased. rooting is not working for me. keep getting adb errors
Click to expand...
Click to collapse
gbear718 said:
daveeckert said:
Yep, here's the link to the post in the dev boards:
http://forum.xda-developers.com/showpost.php?p=48256853&postcount=664[/QUOTE
I think im gonna try to exchange my phone being i just purchased. rooting is not working for me. keep getting adb errors
Click to expand...
Click to collapse
Ok, I finally got around to trying it (wasn't sure if I was going to keep the G2 or go for S4, but G2 it is. I installed the LG drivers (https://drive.google.com/file/d/0B_nizg6yUZ0NWnp5b2U2VkxKbFE/edit?usp=sharing) and followed the instructions line for line, didn't have any problems. Titanium seems to be working Ok for me. If adb isn't working, it's probably a configuration issue on your computer.
Click to expand...
Click to collapse
daveeckert said:
gbear718 said:
Ok, I finally got around to trying it (wasn't sure if I was going to keep the G2 or go for S4, but G2 it is. I installed the LG drivers (https://drive.google.com/file/d/0B_nizg6yUZ0NWnp5b2U2VkxKbFE/edit?usp=sharing) and followed the instructions line for line, didn't have any problems. Titanium seems to be working Ok for me. If adb isn't working, it's probably a configuration issue on your computer.
Click to expand...
Click to collapse
10o can be rooted as pointed out. They were testing recovery for it as well a day or 2 ago. Not sure what happened with it.
Click to expand...
Click to collapse
daveeckert said:
gbear718 said:
Ok, I finally got around to trying it (wasn't sure if I was going to keep the G2 or go for S4, but G2 it is. I installed the LG drivers (https://drive.google.com/file/d/0B_nizg6yUZ0NWnp5b2U2VkxKbFE/edit?usp=sharing) and followed the instructions line for line, didn't have any problems. Titanium seems to be working Ok for me. If adb isn't working, it's probably a configuration issue on your computer.
Click to expand...
Click to collapse
You might be right. root method was giving me issues pushing recovery and ytiruces files to my sdcard. so i did it manually and ran root method again. that did the trick.
Click to expand...
Click to collapse
I was able to recovery after the ota update finally.
Sent from my KFTT using xda app-developers app
strose09 said:
I was able to recovery after the ota update finally.
Sent from my KFTT using xda app-developers app
Click to expand...
Click to collapse
What version and how
Sent from my LG-D800 using XDA Premium 4 mobile app
I used a program called freegee and then used flashify. Previously this method did not work but it works now for twrp 2.6.3.3.
strose09 said:
I used a program called freegee and then used flashify. Previously this method did not work but it works now for twrp 2.6.3.3.
Click to expand...
Click to collapse
I used freegee to flash 2.6.3.3. Unfortunately, the version listed is 2.6.3.0 after doing so. I then used Flashify to flash 2.6.3.3, but I received an error and it turned to black. how did you upgrade from 2.6.3.0 to 2.6.3.3?
Sorry I miss spoke. The version of TWRP I have is 2.6.3.0. that I downloaded from freegee. If it's not working I'd try again as I did not do anything special and make sure the file name matches the flash version. I hope this helps. I am on ATT by the way.
strose09 said:
Sorry I miss spoke. The version of TWRP I have is 2.6.3.0. that I downloaded from freegee. If it's not working I'd try again as I did not do anything special and make sure the file name matches the flash version. I hope this helps. I am on ATT by the way.
Click to expand...
Click to collapse
Have you been able to flash a rom on 2.6.3.0
Sent from my LG-D800 using XDA Premium 4 mobile app
have there been any progress on getting a recovery to work on the ota d80010o
antawnm26 said:
have there been any progress on getting a recovery to work on the ota d80010o
Click to expand...
Click to collapse
It seems that the guys in the following link could flash TWRP and loki. I could successfully boot to TWRP recovery using flashify but I can't flash loki using the script they have provided. I get the error
\loki_flash:can't execute: Permission denied
Please help me if you could successfully flash loki, thanks a lot.
Link to the forum:
http://forum.xda-developers.com/showthread.php?t=2589950
Ehkam said:
It seems that the guys in the following link could flash TWRP and loki. I could successfully boot to TWRP recovery using flashify but I can't flash loki using the script they have provided. I get the error
\loki_flash:can't execute: Permission denied
Please help me if you could successfully flash loki, thanks a lot.
Link to the forum:
http://forum.xda-developers.com/showthread.php?t=2589950
Click to expand...
Click to collapse
Code:
chmod777 /data/local/tmp/loki_flash
datechnerd said:
Code:
chmod777 /data/local/tmp/loki_flash
Click to expand...
Click to collapse
Thanks but it says "chmod777: not found"
One of my brother's friend made "something" to my brother's phone trying to update it.
In short, he bricked the phone (p700), which is looping on boot animation.
What I tried so far:
-I used KDZ and pushed the V20A_00.kdz that has CWM 6.0.2.8, still no boot
-I tried to install a Custom Firmware got error "Status 7" telling me that the CF I wanted to install was for the p700 and my device is a "u0"
Now I'm stuck at this point, what am I doing wrong?
-I thought of pushing a valid p700 build.prop through ADB, but "su" command doesn't work.
-I thought of editing the "scriptupdater" file of the CF, first I tried with this method this time it doesn't give me "Status 7" but it aborts the installation without furher explanation
At this point I'm starting to lose hope, I really want to fix this, please, could you help me?
skychronicles said:
One of my brother's friend made "something" to my brother's phone trying to update it.
In short, he bricked the phone (p700), which is looping on boot animation.
What I tried so far:
-I used KDZ and pushed the V20A_00.kdz that has CWM 6.0.2.8, still no boot
-I tried to install a Custom Firmware got error "Status 7" telling me that the CF I wanted to install was for the p700 and my device is a "u0"
Now I'm stuck at this point, what am I doing wrong?
-I thought of pushing a valid p700 build.prop through ADB, but "su" command doesn't work.
-I thought of editing the "scriptupdater" file of the CF, first I tried with this method this time it doesn't give me "Status 7" but it aborts the installation without furher explanation
At this point I'm starting to lose hope, I really want to fix this, please, could you help me?
Click to expand...
Click to collapse
Can u go into CWM Recovery?
froydenzi said:
Can u go into CWM Recovery?
Click to expand...
Click to collapse
Yes, but every ROM gives an error when I try to flash it.
What error say?
Sent from my LG-P700 using Tapatalk
froydenzi said:
What error say?
Sent from my LG-P700 using Tapatalk
Click to expand...
Click to collapse
When I don't edit the "getprop" part of the updaterscript I get "status 7" error as expected. "This is for p700 devices. Your device is u0"
When I do edit it: "installation aborted"
I will search for it tomorrow,for now i must sleep,its 00:00 in my town,am sleepy.
Sent from my LG-P700 using Tapatalk
You have to update your recovery with Rom Manager or flash the latest TWRP with CWM ( TWRP is an other recovery ) ! No need to edit anything !
Sent from my Nexus 7
azvlean said:
You have to update your recovery with Rom Manager or flash the latest TWRP with CWM ( TWRP is an other recovery ) ! No need to edit anything !
Sent from my Nexus 7
Click to expand...
Click to collapse
Sorry, never heard of this, care to explain?
Sky,what recovery u use?
Sent from my LG-P700 using Tapatalk
skychronicles said:
Sorry, never heard of this, care to explain?
Click to expand...
Click to collapse
Sometimes, the problem happens when your recovery is outdated. So, download ROM Manager and in the app you'll be able to update CWM. If it's already update, download TWRP by @tudorsbird and flash it with CWM. Your recovery will be TWRP but you won't be able to restore backups performed with CWM. If you can't boot but have a SD card, you can put TWRP on the card and flash it.
Or, you can try this ( with Fastboot ) to flash a new recovery :
http://wiki.cyanogenmod.org/w/Doc:_fastboot_intro
Sent from my Nexus 7
On th
Sent from my HUAWEI U9508 using xda app-developers app
I use cwm v6.0.2.8
Sent from my HUAWEI U9508 using xda app-developers app
Here is the link for TWRP : http://sourceforge.net/projects/lgl...TWRP Recovery/twrp.v2.6.3.0_p700.zip/download
Sent from my Nexus 7
azvlean said:
Here is the link for TWRP : http://sourceforge.net/projects/lgl...TWRP Recovery/twrp.v2.6.3.0_p700.zip/download
Sent from my Nexus 7
Click to expand...
Click to collapse
WORKED, thank you so much.
skychronicles said:
WORKED, thank you so much.
Click to expand...
Click to collapse
Your welcome, glad I helped you !
Sent from my Nexus 7
I recently installed CyanogenMod10 on my phone, and it came with CWM installed. I wanted to replace it with TWRP so I installed goomanager to do an openrecoveryscript. However when it came to rebooting it just launched CWM in recovery instead of TWRP. I installed CWM Rom manager and found that both CWM and TWRP are installed. How do i get rid of one?
I found a similar forum thread however it was with a GS3. I was thinking about using the Nexus4 toolkit but I don't think that is compatible with Cyanogenmod as it is bases its mods on stock builds.
Thanks
You can try flashing twrp with a tool kit
Sent from my Nexus 4 using Tapatalk
Zehlek said:
You can try flashing twrp with a tool kit
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Or flashing it via recovery. Never had much luck with GooManager. :banghead:
Try this one :
http://forum.xda-developers.com/showthread.php?t=1766475
Sent from my Nexus 7 (2013)
Berrydroidcafe said:
Or flashing it via recovery. Never had much luck with GooManager. :banghead:
Try this one :
http://forum.xda-developers.com/showthread.php?t=1766475
Sent from my Nexus 7 (2013)
Click to expand...
Click to collapse
noob question, how do I flash a .img file through CWM? It seems that you can only install Zip files.
I also tried the Mskip toolkit and it said that it cannot open the recovery.img on my phone.
Bubblewhip said:
noob question, how do I flash a .img file through CWM? It seems that you can only install Zip files.
I also tried the Mskip toolkit and it said that it cannot open the recovery.img on my phone.
Click to expand...
Click to collapse
It really shouldn't have taken me this long to find it, easier on my computer.
http://nexus4root.com/cwmtwrp-recovery/
Of course download the twrp.zip. It says that trwp doesn't work with Kit Kat custom roms, but I have no problems. YMMV.
Berrydroidcafe said:
It really shouldn't have taken me this long to find it, easier on my computer.
http://nexus4root.com/cwmtwrp-recovery/
Of course download the twrp.zip. It says that trwp doesn't work with Kit Kat custom roms, but I have no problems. YMMV.
Click to expand...
Click to collapse
Got it, I flashed the recovery through ADB that worked. Thanks for everyone's help.
Bubblewhip said:
Got it, I flashed the recovery through ADB that worked. Thanks for everyone's help.
Click to expand...
Click to collapse
Cool!
Sent from my Nexus 7 (2013)
For future reference, one of the easiest ways to flash .img files is with the app Flashify.
Sent from my Nexus 7 using Tapatalk