Hi Every One In Xda-Dev I want Install CM10.1 In My L5 E610 But when im install it stuck in bootloop im using 4.1.2 ROOTED
hussein.karim87 said:
Hi Every One In Xda-Dev I want Install CM10.1 In My L5 E610 But when im install it stuck in bootloop im using 4.1.2 ROOTED
Click to expand...
Click to collapse
you need to have ICS to flash it, from JB you will get a bootloop
Sabyn said:
you need to have ICS to flash it, from JB you will get a bootloop
Click to expand...
Click to collapse
Wrong, you can install from JB(i did it)
Yo have to FULL format /system, /data & /data/media, and /cache for the first time
Enviado desde mi LG-E612g
raul338 said:
Wrong, you can install from JB(i did it)
Yo have to FULL format /system, /data & /data/media, and /cache for the first time
Enviado desde mi LG-E612g
Click to expand...
Click to collapse
totally right!!!! :good:
i have do the same steps,no problem at all.please when not realy sure then not post wrong answers,i mean all here!!!its not helpfull and make many peoples unsure.thanx.
-CALIBAN666- said:
totally right!!!! :good:
i have do the same steps,no problem at all.please when not realy sure then not post wrong answers,i mean all here!!!its not helpfull and make many peoples unsure.thanx.
Click to expand...
Click to collapse
i had a friend who got bootloop when he installed from JB, and i got this problem with CM10 too
Still have the Probleme
still have The boot loop when im install CM 10.1 in my JB 4..1.2 Rooted i do this thing
* Wipe data
* Wipe cache
* Wipe dalvik cache
* Flash the CM10.1 zip
* Reboot
* boot into recovery mode
* Install gapps
* Reboot
Turn off your phone. Press 'Volume -' button and plug in the USB cable, then open KDZ Updater and flash V20C with root or V20D with recovery. In both cases, after flashing, install SuperSU and update binary.
If you installed V20C you need to unlock bootloader and recovery. If you installed the V20D you don't need that.
Just place the CM 10.1 zip file in your sdcard as well as gapps and enter recovery mode (when mobile is shutdown, just press 'Volume -' button alongside with Home button and then press Power button. When the phone turns on, release the Power button).
After that, just wipe data and cache and format system, data and cache. Install CM 10.1 and reboot.
It should work
Do I need to Root
jpslvie said:
Turn off your phone. Press 'Volume -' button and plug in the USB cable, then open KDZ Updater and flash V20C with root or V20D with recovery. In both cases, after flashing, install SuperSU and update binary.
If you installed V20C you need to unlock bootloader and recovery. If you installed the V20D you don't need that.
Just place the CM 10.1 zip file in your sdcard as well as gapps and enter recovery mode (when mobile is shutdown, just press 'Volume -' button alongside with Home button and then press Power button. When the phone turns on, release the Power button).
After that, just wipe data and cache and format system, data and cache. Install CM 10.1 and reboot.
It should work
Click to expand...
Click to collapse
Do I need to Root V20D or install cm 10.1 without root
i installed 20D iwant rotted but icant here is the probleme
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://s16.postimg.org/j2qyuv3ol/root.png
Just flash V20c with root and install SuperSU from Play Store
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was trying to root and it said it failed and this happened
Sent from my Inspire 4G using XDA App
Softbrick. Unlock your bootloader.
I voided my warranty.
pukemon said:
Softbrick. Unlock your bootloader.
I voided my warranty.
Click to expand...
Click to collapse
Thank you. I am now going to go change my pants
pukemon said:
Softbrick. Unlock your bootloader.
I voided my warranty.
Click to expand...
Click to collapse
How do i unlock the bootloader I thought i was already unlocked
edit nvm just unlocked it but now how do i root it
slayaman22232 said:
How do i unlock the bootloader I thought i was already unlocked
edit nvm just unlocked it but now how do i root it
Click to expand...
Click to collapse
Best bet is too pick a rom that is already rooted for you. If you unlocked your bootloader im assuming you plan on using custom roms so just skip the stock and get a rom thats done already. Stock pre-rooted are available as well.
1. First things first: Get fastboot here---> http://gititbit.ch/FAST If you already have it go to #2
2. Get romracers CWM. Get it here---> (pick your favorite color) http://forum.xda-developers.com/showthread.php?t=1204500
3. Reboot phone into fastboot mode.( Power on phone while holding down on the volume rocker then press up on the volume when you see fastboot. First choice and when you hit up it will say starting fastboot protocol.
Fastboot how to--->http://forum.xda-developers.com/showthread.php?t=1175110&highlight=fastboot+how+to
4. Flash romracers CWM recovery--- Fastboot flash recovery c:\ XXXXX.img
Pick a rom you like, put it on SD Card-reboot phone holding volume down. scroll through options pressing down only till you see android recovery and press up. It will now go into romracers recovery, choose install from sd card, then pick your rom and flash.
Thank you so much. These instructions seem pretty straight forward and simple. I shall do this later when i get home. Very nice instructions ty.
Edit: So once i install cwm i can just install any custom rom?
slayaman22232 said:
Thank you so much. These instructions seem pretty straight forward and simple. I shall do this later when i get home. Very nice instructions ty.
Edit: So once i install cwm i can just install any custom rom?
Click to expand...
Click to collapse
As long as your unlocked and have either tenfars or romracers cwm then yes. Romracers cwm is the standerd now.
Sent from my MB860 using XDA App
Dirtburgler said:
As long as your unlocked and have either tenfars or romracers cwm then yes. Romracers cwm is the standerd now.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I think i might go with the alien rom but do you have any that you would recommend? Also any kernels that you would recommend?
Since your kinda new to it all, go with cherry(3.14) or alien. I ran both but ran alien once it got to the 3rd release. Kens work is great. I'm running cm7 beta now but its not fully functional yet. Cherry pie was a little flashy for me. Alien has a good balance of tweaks and color
Sent from my MB860 using XDA App
Just be sure to wipe data/factory reset, wipe cache, go to advanced and wipe dalvik..then install alien...and after it installs wipe data/factory reset, wipe cache, wipe dalvik again then reboot. If your installing the theme for alien, just reboot into recov and follow the same wipe routine install theme wipe routine again.
Even though it says its a full wipe rom still manually wipe withe routine above. Follow that routine for any rom you install.
Sent from my MB860 using XDA App
Will do. Thanks again.
No prob
Sent from my MB860 using XDA App
Just a follow up all is good running alien. xD
Hello All,
Here I'm a newbie trying to install a CM 10.1 by ROM management, Yet I guess I forgot to install gapps-jb-4.2, So no my phone wouldn't turn on. When I push the power bottom, It will give me a picture of Cyanogenmod and would just stop there. And i tried to plug the phone into computer and put the gapps-jb-4.2 into the SD so that it will continue install I guess. But my computer wouldn't recognize the phone now. Could someone help me out with this? Thank you so much.
Boot into boot loader by holding the power button and the volume buttons. When it boots press volume down to scroll until you see recovery. Boot into recovery then do a clean flash of cm 10 and then flash gapps after.
Sent from my Galaxy Nexus using xda app-developers app
jcarter241 said:
Boot into boot loader by holding the power button and the volume buttons. When it boots press volume down to scroll until you see recovery. Boot into recovery then do a clean flash of cm 10 and then flash gapps after.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Thanks. I tried it, it vibrates. And then nothing happens
not installing gapps does nothing bad to your device. the inly difference is that you wont have the google apps. many people choose not to flash it. what you want to do is flash roms in recovery mode, not through rom managee. flashing via app results in trouble many times. boot into recovery, if you have the rom/gapps in storage, wipe data then flash the rom/gapps, then reboot. if you dont have a custom recovery, flash one via fastboot. itll have an option to move files over from your computer to phone via adb. download and move the rom(and gapps) to your phone. wipe data, flash the rom/gapps, then reboot.
---------- Post added at 09:07 PM ---------- Previous post was at 09:04 PM ----------
1988superdavid said:
Thanks. I tried it, it vibrates. And then nothing happens
Click to expand...
Click to collapse
are you sure that you flashed the version for the nexus 4?
are you sure that you flashed the version for the nexus 4?
Click to expand...
Click to collapse
I think he downloaded and installed using ROM manger which is frightening at best.
OP, so nothing happens when trying to boot your phone?
Sent from my Nexus 4 using xda premium
Sounds like you didnt factory reset, wipe cache and wipe dalvik cache?
flash again
flash again guys，，good luck
El Daddy said:
I think he downloaded and installed using ROM manger which is frightening at best.
OP, so nothing happens when trying to boot your phone?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I also download and install stuff with rom manager all the time
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also, OP said he can see the cyanogen mod logo. Probably just a faulty install or corrupted download, although the second is unlikely because recovery is supposed to check the MD5 sum before installing the package.
He shouldn't need to do a factory reset or wipe cache. Installing the CM package should have done all of those automatically.
snapper.fishes said:
I also download and install stuff with rom manager all the time
Also, OP said he can see the cyanogen mod logo. Probably just a faulty install or corrupted download, although the second is unlikely because recovery is supposed to check the MD5 sum before installing the package.
He shouldn't need to do a factory reset or wipe cache. Installing the CM package should have done all of those automatically.
Click to expand...
Click to collapse
if coming from a rom thats not cm based, you have to wipe data(factory reset) before flashing cm.
Do this:
With the phone On power off state, press and hold power and volume down button.
As soon as you see the Google logo let go of the buttons and press volume down button one more time.
You should enter bootloader. Fro there use the volume down button to choose Recovery mode. Press power button to enter recovery mode.
You can then try to reinstall the ROM.
Otherwise, you can use one of the toolkit in the Original Android Development section to install factory image. You will have to have the phone in Bootloader state for the kit to factory restore. From there you can root, flash recovery, and then install ROM.
Sent from my Nexus 4 using Tapatalk 2
I am in the process of installing root and Shabby's kernel and SuperSU on my phone.
Found in this thread.
I have the recovery installed fine. It seems like people were saying that was the hard part in the thread but here is where my problem comes in.
I reboot my phone into the Recovery. I move down to apply update from external storage. When I get there, I see "Stock-MDL-Stable-spr-TW.zip" and "SuperSU-v1.25+.zip"
When I go onto the kernel "Stock-MDL-Stable-spr-TW.zip" and choose to install it, it says a few things and then "E:signature verification failed" then a few other things and says it was complete. It then reboots. The kernel version stays the same as stock. What do I do to get by the "E:signature verification failed"?
EDIT: This is my About Device picture.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What custom recovery are you using?
Sent from my SPH-L720 using Tapatalk 2
Mudavo said:
What custom recovery are you using?
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
really freaked me out, up until 2 months ago that was my avatar . i wa slike wtf? when did i post today XD.
Lol. I just searched for Linux Android 80x80 on image search and it was the first one I saw and liked.
Sent from my SPH-L720 using Tapatalk 2
Mudavo said:
What custom recovery are you using?
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
I'm using OUDHS CWM-based Recovery 1.0.3.3.
Found here, linked in my original post.
Try putting the kernel zip on your internal SD card and applying.
Update: also redownload the kernel zip. May have a bad file.
Sent from my SPH-L720 using Tapatalk 2
how do I get to the file once I put it on my internal SD? in recovery, do i still go to apply update from external storage, adb, or cache?
FeversMirrors said:
how do I get to the file once I put it on my internal SD? in recovery, do i still go to apply update from external storage, adb, or cache?
Click to expand...
Click to collapse
What does your recovery page look like. I had the same issue and it was because I didnt uncheck reboot in Odin after flashing the recovery. So it rebooted & reverted back to the stock kernel is & when i opened up recovery every zip I tried to flash said E signature failure, or something like that. What u need to do is re Odin the custom recovery, but uncheck the reboot option. After using odin & flashing the recovery zip turn device off. Disconnect from ur computer & manually boot into recovery, then wipe cache/dalvik & flash the kernel,& last flash the SuperSU zip. Then reboot & use an app to freeze the app seandroid. Freezing the app has been the only way to get rid of that stupid warning. & just going into developer options & unchecking the USB app security, or whatever its called, still gives me the seandroid has closed, or force closed every 3-30 minutes. So freezing seandroid works the best.
Hello guys,
I need some help. I have LG L5 e610 version. I did root it by the guide on YT. All went ok, Ive had root and CWM.
Then Ive decided to install cm11 on it.. Ive gotten error 7 every time.. Ive then tried to flash mahdi.. Same problem.. Then I've thought it has to be the recovery! And because I'm "to smart" I've flashed philz touch recovery.. Last one in his drive folder.. Now when i try to go to recovery i get white screen and then this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can someone please help me with that? I know Ill have to flash stock kdz back, right? But what to do from there on to get the CM or mahdi or any other KK to work?
Many thanks for responses!
Well first things first, go back to stock via kdz, then get cwm via kdz agen, then what you need to do is download cm11 the gapps and download cwm 6.0.4.8 flashable zip, go in to cwm, flash the 6.0.4.8 cwm file. Reboot your phone. Go back in to recovery whipe data /factory reset, whipe delvic cach, mount system format system, install cm11 from sd. Reboot.
after first reboot go back in to recovery flash gapps. Reboot.
After the phone boots up turn it off and turn it back on, and see if every thing is working.
Sent from my LG-P705 using XDA Free mobile app
Nesh89 said:
Well first things first, go back to stock via kdz, then get cwm via kdz agen, then what you need to do is download cm11 the gapps and download cwm 6.0.4.8 flashable zip, go in to cwm, flash the 6.0.4.8 cwm file. Reboot your phone. Go back in to recovery whipe data /factory reset, whipe delvic cach, mount system format system, install cm11 from sd. Reboot.
after first reboot go back in to recovery flash gapps. Reboot.
After the phone boots up turn it off and turn it back on, and see if every thing is working.
Sent from my LG-P705 using XDA Free mobile app
Click to expand...
Click to collapse
E hvala! Probam, kad dodjem kuči!
Many thanks.
It works! Awesome, puno hvala!
Drago mi je da sam mogao da pomognem your very welcome
Sent from my LG-P705 using XDA Free mobile app
Hi
I have an rooted SGS4 i9506 running android 4.3. I rooted via the clockwork method. The phone is not locked to any operator. I use it in sweden.
I would like to upgrade to android lollipop, i guess i will have to root it again. Could anyone walk me throug with this process (finding the right android lollipop and flashing it and rooting the phone) .
Specs: SGS4 GT-i9056, Android 4.3 Basebandversion: I9506XXUBMK7
jsson98 said:
Hi
I have an rooted SGS4 i9506 running android 4.3. I rooted via the clockwork method. The phone is not locked to any operator. I use it in sweden.
I would like to upgrade to android lollipop, i guess i will have to root it again. Could anyone walk me throug with this process (finding the right android lollipop and flashing it and rooting the phone) .
Specs: SGS4 GT-i9056, Android 4.3 Basebandversion: I9506XXUBMK7
Click to expand...
Click to collapse
Hi,
Since you already have a rooted SGS4, you would have to flash a custom recovery to flash the ROM:http://forum.xda-developers.com/gal...recovery-twrp-2-8-1-0-touch-recovery-t2942159
Here is the Cyanogenmod 12 ROM for your phone: http://forum.xda-developers.com/gal...nogenmod-12-0-galaxy-s4-lte-gt-i9506-t2988464
Follow the instructions from "HOW TO INSTALL" from each of these links.
Also, here is the dedicated forum link for your device: http://forum.xda-developers.com/galaxy-s4/i9506-develop
warrior1208 said:
Hi,
Since you already have a rooted SGS4, you would have to flash a custom recovery to flash the ROM:http://forum.xda-developers.com/gal...recovery-twrp-2-8-1-0-touch-recovery-t2942159
Here is the Cyanogenmod 12 ROM for your phone: http://forum.xda-developers.com/gal...nogenmod-12-0-galaxy-s4-lte-gt-i9506-t2988464
Follow the instructions from "HOW TO INSTALL" from each of these links.
Also, here is the dedicated forum link for your device: http://forum.xda-developers.com/galaxy-s4/i9506-develop
Click to expand...
Click to collapse
So what your saying is that sinc the phone is rooted i have to flash the recovery rom to be able to flash the cyanogenmod rom?
Is the cyanogenmod android lollipop? Is the cyanogenmod you linked prerooted?
jsson98 said:
So what your saying is that sinc the phone is rooted i have to flash the recovery rom to be able to flash the cyanogenmod rom?
Is the cyanogenmod android lollipop? Is the cyanogenmod you linked prerooted?
Click to expand...
Click to collapse
1. Yes, you have to flash a custom recovery to flash Cyanogenmod 12.
2. Yes, Cyanogenmod 12 is a Lollipop android ROM.
3. Yes, Cyanogenmod 12 is pre rooted. Though, you may install SuperSU as a root access app. http://forum.xda-developers.com/showthread.php?t=1538053
warrior1208 said:
1. Yes, you have to flash a custom recovery to flash Cyanogenmod 12.
2. Yes, Cyanogenmod 12 is a Lollipop android ROM.
3. Yes, Cyanogenmod 12 is pre rooted. Though, you may install SuperSU as a root access app. http://forum.xda-developers.com/showthread.php?t=1538053
Click to expand...
Click to collapse
I have installed the custom recovery and now i'm going to install Cyanogenmod but i'm a bit uncertan what files i'm going to transfer to the sd card, is it the whole zip file or is it youst some of the files inside the zip?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jsson98 said:
I have installed the custom recovery and now i'm going to install Cyanogenmod but i'm a bit uncertan what files i'm going to transfer to the sd card, is it the whole zip file or is it youst some of the files inside the zip?
Click to expand...
Click to collapse
DONOT EXTRACT THE .ZIP FOLDER.
Just place the rom.zip as it is on your SD Card, and then follow the instructions as stated in the thread.
Go to the recovery,
Wipe data/factory reset,
Wipe dalvik cache,
Install the ROM and the Gapps.
Reboot system
warrior1208 said:
DONOT EXTRACT THE .ZIP FOLDER.
Just place the rom.zip as it is on your SD Card, and then follow the instructions as stated in the thread.
Go to the recovery,
Wipe data/factory reset,
Wipe dalvik cache,
Install the ROM and the Gapps.
Reboot system
Click to expand...
Click to collapse
Ok i have put the zip on the sd and wiped dalvik chache and done a factory reset
Shall i hit install and just chose the zip and and rebot? Is that all?'
You say that i shall install ROM and the gapps how do i do that when i only have one zip file? Are both the files inside the zip
jsson98 said:
Ok i have put the zip on the sd and wiped dalvik chache and done a factory reset
Shall i hit install and just chose the zip and and rebot? Is that all?'
You say that i shall install ROM and the gapps how do i do that when i only have one zip file? Are both the files inside the zip
Click to expand...
Click to collapse
Yes you have to install both the packages, and you are following the correct method.
Here is the gapps link.
http://goo.gl/zmnh4o
Download it, from recovery choose mount USB and copy this on your SD Card, then flash both the .zips.
warrior1208 said:
Yes you have to install both the packages, and you are following the correct method.
Here is the gapps link.
http://goo.gl/zmnh4o
Download it, from recovery choose mount USB and copy this on your SD Card, then flash both the .zips.
Click to expand...
Click to collapse
Downloaded the gapps-modular-pico(uni)-5.0.1-RC2-20150125a-signed.zip and put it on the sd card. Then enterd recovery and did a wipe (it says that it wipes data cashe and dalvik) Then i installed the zip from cyanogenmod and then the gapps zip. When reboting it stops on start screen and says Kernel is not SEANDROID enforcing Set waranty bit: kernel
Did i download the wrong gapps file, there was two and i downloaded the one above...