Related
Introduction
The purpose of this guide is to provide you with step-by-step instructions on how to unlock the bootloader on your Nvidia Shield.
Why Would I want to Unlock my Bootloader?
Unlocking your bootloader allows you to modify all aspects of your device to suite your needs which includes but is not limited to, installing custom Recovery images such as Clockworkmod Recovery or Team Win Recovery Project, installing custom ROM's, custom Kernels, as well as other MOD's and patches.
Will Unlocking my Bootloader Void my Warranty?
Warning: Unlocking your Nvidia Shield's bootloader will void the warranty, please note that even if you re-lock the bootloader the bootloader still show a flag that the device is voided for warranty.
This warning being given please also see this post by JordanKeyes regarding warranty information as it relates to hardware issues or hardware failures.
Unlocking your Bootloader
1. Backup everything on your device that you don't want to loose such any apps (And there respective data), pictures, videos, music, etc. as unlocking your devices bootloader will erase all data on the device. You can fully backup your devices contents without root using ADB's backup command or by using the Holo Backup Tool.
2. Download and install the ADB and Fastboot drivers for your Shield, the drivers can be downloaded here. You can also follow along with wwjoshdew's excellent video tutorial on how to properly install the ADB and Fastboot drivers for your Shield on Windows.
3. Make sure you have ADB and Fastboot setup and installed on your computer. If you haven't already setup and installed ADB and Fastboot a simple ADB and Fastboot installer can be downloaded from here.
4. Fully power off your Shield by long pressing on the Power button until the power menu appears, then select the "Power off" option.
5. Boot your Shield into Fastboot mode using one of the following ways:
5. A. Power on your Shield while simultaneously holding the Power button + Back button + Home button. Release the buttons once the Fastboot bootloader screen appears.
5. B. Run the following ADB command from a command prompt window (USB cable must already be connected from your Shield to your Computer):
Code:
adb reboot bootloader
6.Now that you are at the Fastboot bootloader screen, connect your Shield to your computer using your USB cable. Make sure that your USB cable is plugged into a USB 2.0 port directly connected to your motherboard as sometimes USB 3.0 ports can cause problems and front panel USB connections can be unreliable.
7. Open up a command prompt window (cmd) in the directory where installed ADB and Fastboot to. For example if I installed ADB and Fastboot to a folder on my Desktop which is on my D: drive I would open a command window in "D:\Desktop\Fastboot_ADB".
8. From the command prompt windows enter the following command:
Code:
fastboot devices
If you device is detected and it shows your devices serial number you are ready to move on to the next step. If no device is shown make sure you have the correctly installed the ADB and Fastboot drivers from step number 2.
9. Now that your device is detected by Fastboot the following command is used to unlock your bootloader:
Code:
fastboot oem unlock
10. You will now be presented with the bootloader unlock menu. After reading the disclaimer, use the Back button and the Home button to navigate to the "Unlock" option. Once the "Unlock" option has been highlighted use the Shield button to confirm your selection of unlocking your bootloader. It's important to remember that unlocking the bootloader will wipe all your data from the device, and that a flag showing your warranty is void will appear at the bootloader screen.
11. Once your bootloader has finished being unlocked, you will be taken back to the fastboot bootloader screen. From here you can power off your Shield.
Re-locking your Bootloader
To re-lock your bootloader you can following steps 4-8 of the procedure listed above and when you come to step 9 run the following command instead of "fastboot oem unlock":
Code:
fastboot oem lock
The above command will re-lock your Shield's bootloader. Note: As previously mentioned re-locking your Shield's bootloader will not restore your warranty or remove the warranty void flag on your device's bootloader.
Conclusion
Now that you have successfully unlocked the bootloader on your Nvidia Shield you are free to flash custom Recoveries, ROM's, Kernel's, MOD's etc. enjoy :good:.
If you are stuck with the bootloader unlocking procedure I would recommend checking out this great video tutorial by wwjoshdew.
I'm having an issue unlocking the bootloader. I have the drivers and fastboot install successfully as well as adb and fastboot. I run the command "adb reboot bootloader" which reboots my shield into bootloader but when I run "fastboot devices" nothing shows up. USB debugging is enabled.
When the device is booted normally the command "adb devices" picks up the device. It is only in fastboot that adb commands aren't recognized.
I added a picture, any thoughts?
Edit: followed the instructions in the following video and all is dandy now. http://www.youtube.com/watch?v=XSisjVwcPbE&hd=1
themichael said:
I'm having an issue unlocking the bootloader. I have the drivers and fastboot install successfully as well as adb and fastboot. I run the command "adb reboot bootloader" which reboots my shield into bootloader but when I run "fastboot devices" nothing shows up. USB debugging is enabled.
When the device is booted normally the command "adb devices" picks up the device. It is only in fastboot that adb commands aren't recognized.
I added a picture, any thoughts?
Click to expand...
Click to collapse
Look in device manager and check if the PC recognizes the shield as an adb device when in fastboot.
For me i have to switch between using fastboot and being able to copy files to it.
fastboot error
chevyowner said:
Look in device manager and check if the PC recognizes the shield as an adb device when in fastboot.
For me i have to switch between using fastboot and being able to copy files to it.
Click to expand...
Click to collapse
Hi i am having issue with dab and fast boot drivers.
When I install the driver as adb I can't fast boot to install the thor.img but once it reboots It reverts or reinstalls a shield driver and causes confusion and blocks when I want to mount.
gogul1 said:
Hi i am having issue with dab and fast boot drivers.
When I install the driver as adb I can't fast boot to install the thor.img but once it reboots It reverts or reinstalls a shield driver and causes confusion and blocks when I want to mount.
Click to expand...
Click to collapse
Nvidia just released a new set of USB drivers in their Tegra for Android Development Pack which you can download from here. I would recommend installing the development pack and the drivers it includes.
ok
I have done it and these are the new drivers I have under device manager.
Still can't mount though, operation not permitted Usb debugging enabled.
here are the two new drivers which let me get as far as the mount command but no further
View attachment 2210144
and here's it telling me no in abd and fastboot
View attachment 2210148
gogul1 said:
I have done it and these are the new drivers I have under device manager.
Still can't mount though, operation not permitted Usb debugging enabled.
here are the two new drivers which let me get as far as the mount command but no further
View attachment 2210144
and here's it telling me no in abd and fastboot
View attachment 2210148
Click to expand...
Click to collapse
From that pic you posted the mount command failed because you were not root.
chevyowner said:
From that pic you posted the mount command failed because you were not root.
Click to expand...
Click to collapse
I have updated the original post in my manual rooting procedure thread that includes a new insecure boot.img that has a patched adbd binary to allow the insecure boot.img to provide a root shell when booted from.
shimp208 said:
I have updated the original post in my manual rooting procedure thread that includes a new insecure boot.img that has a patched adbd binary to allow the insecure boot.img to provide a root shell when booted from.
Click to expand...
Click to collapse
Huh??????????
EDIT
Were you trying to answer this post
chevyowner said:
Huh??????????
EDIT
Were you trying to answer this post
Click to expand...
Click to collapse
Oh what I meant chevyowner was since you had responded to that guy's post about him not having a root shell after booting the insecure boot.img I decided to jump in and mention I had updated the original post to include a new updated insecure boot.img that should fix his root shell problem. Sorry for any confusion I caused there buddy!
shimp208 said:
Oh what I meant chevyowner was since you had responded to that guy's post about him not having a root shell after booting the insecure boot.img I decided to jump in and mention I had updated the original post to include a new updated insecure boot.img that should fix his root shell problem. Sorry for any confusion I caused there buddy!
Click to expand...
Click to collapse
No problem.
I had to change to oil in my car in a parking lot earlier because it was cheaper to change it then it would have been add 3-4 quarts and change it when I got home. My car need 5 quarts of oil. I was not in a a good mood then.
I made two videos on the NVIDIA Shield. Please let me know what you think @shimp208.
How To Unlock the Bootloader: http://www.youtube.com/watch?v=7Am5WYRojMs
How To Root the Nvidia Shield: http://www.youtube.com/watch?v=_4-C0CzKoFs
thx. works nice.
wwjoshdew said:
I made two videos on the NVIDIA Shield. Please let me know what you think @shimp208.
How To Unlock the Bootloader: [
How To Root the Nvidia Shield: []
Click to expand...
Click to collapse
Sweet thanks
wwjoshdew said:
I made two videos on the NVIDIA Shield. Please let me know what you think @shimp208.
How To Unlock the Bootloader: http://www.youtube.com/watch?v=7Am5WYRojMs
How To Root the Nvidia Shield: http://www.youtube.com/watch?v=_4-C0CzKoFs
Click to expand...
Click to collapse
I tried another proggie to root and got jammed up.. following the videos josh did had me rooted in minutes. Great job and thanks!
why?
Code:
C:\Users\Thomas>fastboot oem unlock
...
FAILED (command write failed (Unknown error))
finished. total time: 0.582s
I tried it with the Shield RAM tool, but won't work either..
so, i managed to root and install custom recovery without touching the bootloader. the status still reads as locked, but i am free to mod and install custom roms and such. i used towelroot apk. and flashify to flash the recovery image.
mr.dude5660 said:
so, i managed to root and install custom recovery without touching the bootloader. the status still reads as locked, but i am free to mod and install custom roms and such. i used towelroot apk. and flashify to flash the recovery image.
Click to expand...
Click to collapse
Where did you find the towelroot apk? Been searching for over a month with no success.
Sent from my VS980 4G using Tapatalk
BTW, bootloader mode on the tablet:
- Hold "Volume Down" -> Press "Power" and continue to hold "Volume Down" until device boots into bootloader mode.
There is no home or back button to press while the device is off.
Sorry for bump this thread, but i have to.
I want to unlock my bootloader to revert back into KK and then try to do a clean installation of LP. Reading this guide and watching the videos, and also looking into the img downloaded from nvidia, it says i have to install the fastboot drivers. The problem is that i have already installed fastboot and adb drivers since i have some other devices as a Xperia and stuff. For me, there is no Yellow sign as shown in the video, my device is recognized as Portable Device and it already says "Shield Tablet" MTP.
I've tried going into bootloader to see if it prompts any new devices but i got nothing. adb devices show my device, but i'm not sure if i need more.
I installed Android O DP2 update via OTA yesterday. The phone updated, rebooted to the new build and restarted abruptly and since then has been stuck in a boot loop. The Google logo shows up, goes to the android animation step and then Google logo appears again.
I don't have bootloader unlocked, don't have TWRP and have done OTA updates. I am able to get into the stock recovery mode.
How do I fix this, i.e. make it work in any way without erasing the user data? I don't mind extreme steps (without erasing user data) because I was planning to reflash 7 with unlocking & rooting today.
Try to wipe cache from recovery - in recovery hold volume-down and select "Wipe cache partition". Should do the trick
I tried, didn't work. Had to factory reset in the end. Also opted out of beta
I just read that some people that took the update from certain builds had boot loops due to the update only replacing part of the OS but leaving the 7.x.x system in place causing it to boot loop. I think it was like on android authority or something like that.
Sent from my Nexus 6P using XDA-Developers Legacy app
I have similar problem. Phone became stuck at Google logo and bootloop. I didn't have OEM unlock and debugged enable when phone was working. Now I'm stuck because It cannot flash with any factory image rom. Anyone with solution, please help. Thanks
citifone said:
I have similar problem. Phone became stuck at Google logo and bootloop. I didn't have OEM unlock and debugged enable when phone was working. Now I'm stuck because It cannot flash with any factory image rom. Anyone with solution, please help. Thanks
Click to expand...
Click to collapse
You can unlock your bootloader to flash a stock ROM. Do you need the steps?
---------- Post added at 09:54 AM ---------- Previous post was at 09:38 AM ----------
citifone said:
I have similar problem. Phone became stuck at Google logo and bootloop. I didn't have OEM unlock and debugged enable when phone was working. Now I'm stuck because It cannot flash with any factory image rom. Anyone with solution, please help. Thanks
Click to expand...
Click to collapse
To flash a system image:
Download the latest system image for your Nexus 6p, then unzip it to a safe directory.
https://dl.google.com/dl/android/aosp/angler-n2g47o-factory-dc258043.zip
or Download any of your choice from here
https://developers.google.com/android/images
Connect your device to your computer over USB.
Start the device in fastboot mode with one of the following methods:
adb tool
http://developer.android.com/tools/help/adb.html
Using a key combo: Turn the device off, then turn it on and immediately hold down the relevant key combination for your device.
POWER BUTTON + VOLUME DOWN BUTTON
Click to expand...
Click to collapse
If necessary, unlock the device's bootloader using one of the following methods:
Code:
fastboot flashing unlock
If you are updating an older device, run this command:
Code:
fastboot oem unlock
The target device will show you a confirmation screen. (This erases all data on the target device.)
Open a terminal and navigate to the unzipped system image directory or Open a command prompt from within your System image folder (navigate to where you have flash-all.bat located on your PC, shift + right click anywhere within that folder, select open command prompt here
Execute the flash-all script.
Code:
fastboot flash-all.bat
This script installs the necessary bootloader, baseband firmware(s), and operating system.
Once the script finishes, your device reboots. You should now lock the bootloader for security:
Start the device in fastboot mode again, as described above.
Execute:
Code:
fastboot flashing lock
or, for older devices, run:
Code:
fastboot oem lock
Locking bootloader will wipe the data on some devices. After locking the bootloader, if you want to flash the device again, you must run fastboot oem unlock again, which will wipe the data.
Mavelos said:
You can unlock your bootloader to flash a stock ROM. Do you need the steps?
---------- Post added at 09:54 AM ---------- Previous post was at 09:38 AM ----------
To flash a system image:
Download the latest system image for your Nexus 6p, then unzip it to a safe directory.
https://dl.google.com/dl/android/aosp/angler-n2g47o-factory-dc258043.zip
or Download any of your choice from here
https://developers.google.com/android/images
Connect your device to your computer over USB.
Start the device in fastboot mode with one of the following methods:
adb tool
http://developer.android.com/tools/help/adb.html
Using a key combo: Turn the device off, then turn it on and immediately hold down the relevant key combination for your device.
If necessary, unlock the device's bootloader using one of the following methods:
Code:
fastboot flashing unlock
If you are updating an older device, run this command:
Code:
fastboot oem unlock
The target device will show you a confirmation screen. (This erases all data on the target device.)
Open a terminal and navigate to the unzipped system image directory or Open a command prompt from within your System image folder (navigate to where you have flash-all.bat located on your PC, shift + right click anywhere within that folder, select open command prompt here
Execute the flash-all script.
Code:
fastboot flash-all.bat
This script installs the necessary bootloader, baseband firmware(s), and operating system.
Once the script finishes, your device reboots. You should now lock the bootloader for security:
Start the device in fastboot mode again, as described above.
Execute:
Code:
fastboot flashing lock
or, for older devices, run:
Code:
fastboot oem lock
Locking bootloader will wipe the data on some devices. After locking the bootloader, if you want to flash the device again, you must run fastboot oem unlock again, which will wipe the data.
Click to expand...
Click to collapse
Thanks for your reply..But you can only do this only if you have an unlocked bootloader and debugged mode on. I didn't have either so it won't allow to flash with locked bootloader.
citifone said:
Thanks for your reply..But you can only do this only if you have an unlocked bootloader and debugged mode on. I didn't have either so it won't allow to flash with locked bootloader.
Click to expand...
Click to collapse
Exactly why i posted that. You can unlock your bootloader without turning USB debugging ON. Just Boot up with the POWER + VOLUME down Combination and use the bootloader unlock command in my previous post.
FAILED (remote: OEM unlock is not allowed)
Mavelos said:
Exactly why i posted that. You can unlock your bootloader without turning USB debugging ON. Just Boot up with the POWER + VOLUME down Combination and use the bootloader unlock command in my previous post.
Click to expand...
Click to collapse
What I think he is telling you and the same problem I have, when We try the unlock command we are getting this error :
FAILED (remote: OEM unlock is not allowed)
any suggestions ?
Regards.
Lord Aguacate said:
What I think he is telling you and the same problem I have, when We try the unlock command we are getting this error :
FAILED (remote: OEM unlock is not allowed)
any suggestions ?
Regards.
Click to expand...
Click to collapse
Yes, I got the same error. Again, it's because of bootloader locked and debug is off. Any other ways to unlock or flash this phone?
citifone said:
Yes, I got the same error. Again, it's because of bootloader locked and debug is off. Any other ways to unlock or flash this phone?
Click to expand...
Click to collapse
To unlock you first need to have ticked the allow OEM unlock from developer menu within the OS. It won't work otherwise.
Lord Aguacate said:
What I think he is telling you and the same problem I have, when We try the unlock command we are getting this error :
FAILED (remote: OEM unlock is not allowed)
any suggestions ?
Regards.
Click to expand...
Click to collapse
You'll have to use a Rescue OTA
Download the latest Nexus 6P OTA from here https://dl.google.com/dl/android/aosp/angler-ota-n2g47o-ec3f4df1.zip
STEPS TO FOLLOW
To apply an OTA update image:
Download the appropriate update image for your device below.
https://dl.google.com/dl/android/aosp/angler-ota-n2g47o-ec3f4df1.zip
Boot into your recovery from fastboot
use the key combination for your device
Code:
POWER + VOLUME DOWN
and then select the Recovery option from the bootloader menu. The device is now in recovery mode and an Android logo with red exclamation mark should appear on screen.
Hold the Power button and press Volume Up once, and a menu will appear. Select the option Apply update from ADB.
Run the following command on your PC:
Code:
adb devices
and check that your device shows up with "sideload" next to its name.
Run the following command:
Code:
adb sideload ota_file.zip
where ota_file.zip is the name of the file you have downloaded and verified.
Once the update finishes, reboot the phone by choosing Reboot system now.
Mavelos said:
You'll have to use a Rescue OTA
Download the latest Nexus 6P OTA from here [="https://dl.google.com/dl/android/aosp/angler-ota-n2g47o-ec3f4df1.zip"]https://dl.google.com/dl/android/aosp/angler-ota-n2g47o-ec3f4df1.zip
STEPS TO FOLLOW
To apply an OTA update image:
Download the appropriate update image for your device below.
="https://dl.google.com/dl/android/aosp/angler-ota-n2g47o-ec3f4df1.zip"]https://dl.google.com/dl/android/aosp/angler-ota-n2g47o-ec3f4df1.zip
Boot into your recovery from fastboot
use the key combination for your device
Code:
POWER + VOLUME DOWN
and then select the Recovery option from the bootloader menu. The device is now in recovery mode and an Android logo with red exclamation mark should appear on screen.
Hold the Power button and press Volume Up once, and a menu will appear. Select the option Apply update from ADB.
Run the following command on your PC:
Code:
adb devices
and check that your device shows up with "sideload" next to its name.
Run the following command:
Code:
adb sideload ota_file.zip
where ota_file.zip is the name of the file you have downloaded and verified.
Once the update finishes, reboot the phone by choosing Reboot system now.
Click to expand...
Click to collapse
Dear Mavelos,
I already tried that and the installation was successful, but my first problem still there, when I installed the Android O Beta, the touch of my screen stop working after the 2nd day of installation.
Now I don't know if this is a problem with Android O or just a coincidence and the hardware its broken.
I went to a lot of forums but nobody its talking about that (Touch Screen not working)
Did You guys hear anything about it?
Mavelos said:
You'll have to use a Rescue OTA
Download the latest Nexus 6P OTA from here https://dl.google.com/dl/android/aosp/angler-ota-n2g47o-ec3f4df1.zip
STEPS TO FOLLOW
To apply an OTA update image:
Download the appropriate update image for your device below.
https://dl.google.com/dl/android/aosp/angler-ota-n2g47o-ec3f4df1.zip
Boot into your recovery from fastboot
use the key combination for your device
Code:
POWER + VOLUME DOWN
and then select the Recovery option from the bootloader menu. The device is now in recovery mode and an Android logo with red exclamation mark should appear on screen.
Hold the Power button and press Volume Up once, and a menu will appear. Select the option Apply update from ADB.
Run the following command on your PC:
Code:
adb devices
and check that your device shows up with "sideload" next to its name.
Run the following command:
Code:
adb sideload ota_file.zip
where ota_file.zip is the name of the file you have downloaded and verified.
Once the update finishes, reboot the phone by choosing Reboot system now.
Click to expand...
Click to collapse
I have the same problem as others, stuck in a bootloop and had not enabled unlock in dev options. I can get to bootloader but not recovery mode (bootloops when I select this). I would love to try this OTA side load, but I can't see my device in adb. I can see it however in fastboot. Not sure how to get it up in adb....
Any help would be much appreciated.
scorneil said:
I have the same problem as others, stuck in a bootloop and had not enabled unlock in dev options. I can get to bootloader but not recovery mode (bootloops when I select this). I would love to try this OTA side load, but I can't see my device in adb. I can see it however in fastboot. Not sure how to get it up in adb....
Any help would be much appreciated.
Click to expand...
Click to collapse
If you get a bootloop when selecting recovery, try rebooting to recovery with fastboot
Code:
fastboot reboot recovery
if that doesn't work, then i think your device is bricked.
---------- Post added at 06:19 AM ---------- Previous post was at 06:16 AM ----------
Lord Aguacate said:
Dear Mavelos,
I already tried that and the installation was successful, but my first problem still there, when I installed the Android O Beta, the touch of my screen stop working after the 2nd day of installation.
Now I don't know if this is a problem with Android O or just a coincidence and the hardware its broken.
I went to a lot of forums but nobody its talking about that (Touch Screen not working)
Did You guys hear anything about it?
Click to expand...
Click to collapse
If your touch screen isn't working, it might be related to the Android O Beta you flashed. Can you boot the phone up? If you have an OTG cable, connect a mouse to your phone. Turn on OEM unlocking in developer options. Do a factory reset.
i have the same problem with this, and i cannot unlock it too, is there anyway to unlock this phone?
OTG works Perfect! But.....
Mavelos said:
If you get a bootloop when selecting recovery, try rebooting to recovery with fastboot
Code:
fastboot reboot recovery
if that doesn't work, then i think your device is bricked.
---------- Post added at 06:19 AM ---------- Previous post was at 06:16 AM ----------
If your touch screen isn't working, it might be related to the Android O Beta you flashed. Can you boot the phone up? If you have an OTG cable, connect a mouse to your phone. Turn on OEM unlocking in developer options. Do a factory reset.
Click to expand...
Click to collapse
So I Follow your suggestion and I bought the OTG adapter, works perfectly I unlocked the bootloader from the developers options, did a factory restore with a previous image, etc.... Touch still not working, I'm starting to believe this a hardware problem with the screen.... Bad Luck maybe, I don't know! ..... I will have to buy that expensive screen ($140).
Anyway thanks for the help...
Regards
Lord Aguacate said:
So I Follow your suggestion and I bought the OTG adapter, works perfectly I unlocked the bootloader from the developers options, did a factory restore with a previous image, etc.... Touch still not working, I'm starting to believe this a hardware problem with the screen.... Bad Luck maybe, I don't know! ..... I will have to buy that expensive screen ($140).
Anyway thanks for the help...
Regards
Click to expand...
Click to collapse
You're welcome. Get your phone fixed and return to the flashing community.
last night i my phone inside my freezer hehehe and this morning i tried to turn it on, and it pass the google logo boot normally but it only lasted for a few minute and then turn off and bootloop again. so i guess my 6p has a hardware faulty
Orea beta is great but battery drain so much.
for 30 min of screen use it used 11%, is it normal ?
and I am looking to go back to Nougat, could any one please tell me how can I go back.
Thank you.
are this instructions for downgrading ?
Set up your computer for flashing
Download the fastboot tool from the Android SDK Platform-Tools package
Add it to your path so the flash scripts can find it
Connect your Essential phone to your computer with a USB cable
Enable unlocking
Before you can flash a new image, ensure Developer options are enabled and OEM unlocking is turned on. To do this:
Tap Settings, then tap System > About phone
Scroll to the bottom of the page, then tap Build number multiple times until you see the pop-up message “You are now a developer” (It usually takes seven taps)
Go back one screen to System, then tap Developer options
Find the option: OEM Unlocking and turn it on
Fastboot mode
Put your Essential Phone into fastboot mode by doing either of the following:
Use the ADB tool packaged above to run the command: adb reboot bootloader
Reboot your phone while holding the Volume-down button
Unlock your bootloader
NOTE: Installing the factory image will erase all information from your device. So remember to backup your phone before continuing.
Run the command: fastboot flashing unlock
Press the Volume-down button to navigate to the YES option, then press the Power button to confirm
Flash your factory image
Download the factory image to your computer
Unzip the downloaded file
Go to where you unzipped the images
For Linux / Mac OS X - Run the command: flashall.sh
For Windows - Run the command: flashall.bat
https://forum.xda-developers.com/essential-phone/help
Yup those are them, I just did it yesterday.
Just an FYI, I found that putting Oreo on the phone resulted in ADB not working 100% anymore, such as attempting to reboot into recovery/etc. It would just reboot back into the O.S..
Here is what I did.
- download the current release you want to flash. (e.g. NMJ32F), then unzip it into a new folder.
- on your phone, verify that USB debugging and OEM unlocking are turned on in the developers menu.
- reboot your phone into the fastboot mode (power and volume down buttons)
- from your adb command line: type: fastboot flashing unlock
- This will make your phone show a new screen asking if you want to unlock the bootloader. Use the volume down to select YES, and hit the power button. It will now reboot and erase the phone. It will eventually end up booting up too request you setup the phone. (that is what it did for me.)
- reboot the phone back into the fastboot mode (power and volume down buttons)
- you should now see the bootloader listed as unlocked (vs locked)
- from your adb command line: type: fastboot devices (which should show your phones serial number and fastboot next too it.
- on your computer, using the command line, go to the unzipped folder of the NMJ32F build you downloaded
- in the folder there is a batch file you will run called flashall.bat. run it
- your phone will start flashing the NMJ32F build
- when it completes it will reboot a couple of times, erase the phone, and end up at the "lets get started" screen.
- reboot the phone back to the fastboot mode
- from your adb command line: type: fastboot flashing lock
- select the option to lock your bootloader. The phone will reboot/erase I believe, and then end up back to the "lets get started" screen.
- after you setup your phone, you can go back into the developers menu to turn off the oem unlocking
The above steps pretty much follow essentials instructions. (the essential instructions don't give some specifics.)
You are all done. (I recommend you review my instructions and the essential instructions carefully, don't copy paste commands as I may have spelled something wrong, etc.. Just wanted to give you a flow of the process.)
vjyrdy said:
are this instructions for downgrading ?
Set up your computer for flashing
Download the fastboot tool from the Android SDK Platform-Tools package
Add it to your path so the flash scripts can find it
Connect your Essential phone to your computer with a USB cable
Enable unlocking
Before you can flash a new image, ensure Developer options are enabled and OEM unlocking is turned on. To do this:
Tap Settings, then tap System > About phone
Scroll to the bottom of the page, then tap Build number multiple times until you see the pop-up message “You are now a developer” (It usually takes seven taps)
Go back one screen to System, then tap Developer options
Find the option: OEM Unlocking and turn it on
Fastboot mode
Put your Essential Phone into fastboot mode by doing either of the following:
Use the ADB tool packaged above to run the command: adb reboot bootloader
Reboot your phone while holding the Volume-down button
Unlock your bootloader
NOTE: Installing the factory image will erase all information from your device. So remember to backup your phone before continuing.
Run the command: fastboot flashing unlock
Press the Volume-down button to navigate to the YES option, then press the Power button to confirm
Flash your factory image
Download the factory image to your computer
Unzip the downloaded file
Go to where you unzipped the images
For Linux / Mac OS X - Run the command: flashall.sh
For Windows - Run the command: flashall.bat
https://forum.xda-developers.com/essential-phone/help
Click to expand...
Click to collapse
I cannot get past the flashall.sh command, says permission denied everytime. I am able to execute every command to that point with out any issues. I have downloaded the latest android platform tools, and my mac is on the latest version of macOS . I have also tried to flash every single image that is available on the essential dev webpage. Any ideas would be awesome, is in possible to side load using the adb commands from the recovery menu and avoid the fastboot mode all together.
swagglepuff said:
I cannot get past the flashall.sh command, says permission denied everytime. I am able to execute every command to that point with out any issues. I have downloaded the latest android platform tools, and my mac is on the latest version of macOS . I have also tried to flash every single image that is available on the essential dev webpage. Any ideas would be awesome, is in possible to side load using the adb commands from the recovery menu and avoid the fastboot mode all together.
Click to expand...
Click to collapse
unlock_critical.
You can't flash all the partitions is you have not performed and unlock AND and unlock_critical.
tech_head said:
unlock_critical.
You can't flash all the partitions is you have not performed and unlock AND and unlock_critical.
Click to expand...
Click to collapse
I have ran both unlock commands successfully and still get permission denied
swagglepuff said:
I have ran both unlock commands successfully and still get permission denied
Click to expand...
Click to collapse
And you checked the OEM unlock in developer options?
Hmmmm
tech_head said:
And you checked the OEM unlock in developer options?
Hmmmm
Click to expand...
Click to collapse
The issue has something to do with Mac and the platform tools. I was able to downgrade with no problem using a friend's Windows PC.
Sorry for the silly question, but what does this statements means?
"Add it to your path so the flash scripts can find it"
Is there any better instructions for first time user which dont include instructions like above? Thanks.
trizon2016 said:
Sorry for the silly question, but what does this statements means?
"Add it to your path so the flash scripts can find it"
Is there any better instructions for first time user which dont include instructions like above? Thanks.
Click to expand...
Click to collapse
Nothing confusing about that statement for Windows, MacOS or Linux.
A command path needs to exist so that when you type the command it can be found.
I am using Oreo.
But there are too many bugs.
So I want to downgrade.
I want to go back to 7.1.
I tried to find a way.
I do not really know.
Press Volume Down + Power to enter fast boot mode.
With ADB, if you use 'fastboot devices'
Nothing happens.
Developer option, OEM off, all done.
I want to know how to downgrade.
yuhanyanghaeng said:
I am using Oreo.
But there are too many bugs.
So I want to downgrade.
I want to go back to 7.1.
I tried to find a way.
I do not really know.
Press Volume Down + Power to enter fast boot mode.
With ADB, if you use 'fastboot devices'
Nothing happens.
Developer option, OEM off, all done.
I want to know how to downgrade.
Click to expand...
Click to collapse
Follow the instruction provided by Essential:
https://www.essential.com/developer/current-builds
Developer otpion and OEM unlocking are off? Why? That shouldnt be needed.
Download current build from link provide above ^^(current build)
extract the files to your "adb/fastboot/platform tools folder on pc"
connect the phone to computer using usb cable.
Open adb on computer
type adb reboot bootloader
when in bootloader verify fastboot works
"fastboot devices"
if your device shows up double click the flash all script for your OS.
Profit
Hi
By me the same.
When I Type adb reboot Bootloader the Phone starts new and boot up the system.
When I manually Boot into Bootloader the Phone were not found in Fastboot.
Developer option, OEMunlocking , all on.
samy1111 said:
Hi
By me the same.
When I Type adb reboot Bootloader the Phone starts new and boot up the system.
When I manually Boot into Bootloader the Phone were not found in Fastboot.
Developer option, OEMunlocking , all on.
Click to expand...
Click to collapse
I had the same problem. adb worked, fastboot did not. Installing the PH-1 drivers from the Essential support site fixed it.
I have a brand new Oneplus 8 Pro from China with global ROM installed.
I wanted to unlock the bootloader however there is no fastboot option in the boot menu.
There is Start, Restart Bootloader, Recovery and Turn Off.
The Fastboot option is missing.
I can connect the phone to my PC, adb recognizes the phone, but Fastboot is missing.
Any ideas?
Docomoco said:
I have a brand new Oneplus 8 Pro from China with global ROM installed.
I wanted to unlock the bootloader however there is no fastboot option in the boot menu.
There is Start, Restart Bootloader, Recovery and Turn Off.
The Fastboot option is missing.
I can connect the phone to my PC, adb recognizes the phone, but Fastboot is missing.
Any ideas?
Click to expand...
Click to collapse
Sure. You are allready in that mode. Just type fastboot devices and check..
I did that but no response.
The cursor jumps to the next line but there is no response from the phone.
If I type adb devices the phone is listed but the fastboot command doesn't return anything.
Docomoco said:
I have a brand new Oneplus 8 Pro from China with global ROM installed.
I wanted to unlock the bootloader however there is no fastboot option in the boot menu.
There is Start, Restart Bootloader, Recovery and Turn Off.
The Fastboot option is missing.
I can connect the phone to my PC, adb recognizes the phone, but Fastboot is missing.
Any ideas?
Click to expand...
Click to collapse
Restart to bootloader, then fastboot should work. If your phone is still on, and you can access adb, you should also be able to type adb reboot bootloader
Thanks.
So apparently the command "fastboot devices" returns nothing.
However I was able to unlock the bootloader just by entering "adb reboot bootloader" then
"fastboot oem unlock".
What confused me was that there is no "fastboot" option on the phone itself as there was on my Oneplus 5t.
Docomoco said:
Thanks.
So apparently the command "fastboot devices" returns nothing.
However I was able to unlock the bootloader just by entering "adb reboot bootloader" then
"fastboot oem unlock".
What confused me was that there is no "fastboot" option on the phone itself as there was on my Oneplus 5t.
Click to expand...
Click to collapse
The option in the power menu is called bootloader (fastboot only will work there) the hint was in the adb command I gave you, adb reboot BOOTLOADER. Not sure why they changed what the menu was called but I'm glad you got it sorted. To give you a short summary, adb will only work when your phone is powered on and booted into android, or if you have recovery mode open and on the adb section, and fastboot only works in the bootloader hope that could help!
Edit: fastboot devices should work but only in bootloader mode, not when your phone is started normally
Docomoco said:
I have a brand new Oneplus 8 Pro from China with global ROM installed.
I wanted to unlock the bootloader however there is no fastboot option in the boot menu.
There is Start, Restart Bootloader, Recovery and Turn Off.
The Fastboot option is missing.
I can connect the phone to my PC, adb recognizes the phone, but Fastboot is missing.
Any ideas?
Click to expand...
Click to collapse
You have to insert a SIM card, boot of the device and make a phone call to get it to register your device. Wait a few minutes and then restart your phone. Go into settings under about phone and enable developer options. Back out and go into developer options and you will see OEM unlock. You need to turn that on and USB debugging. Both of them must be turned on. Now you can boot into fastboot and unlock your bootloader. It will wipe the device so if you have any data you want to save you better do it now.
hey i am having this issue, i am able to adb reboot bootloader but when i try to oem unlock or anything else, it is just waiting for device and not finding it....
SourPower said:
hey i am having this issue, i am able to adb reboot bootloader but when i try to oem unlock or anything else, it is just waiting for device and not finding it....
Click to expand...
Click to collapse
That's a driver issue.
Are you using Windows 7? If so use 10
If not then sort out your driver's and it'll be fine.
Theres a bug in 7 where the driver for ADB cannot be collaborated with fastboot drivers.
dladz said:
That's a driver issue.
Are you using Windows 7? If so use 10
If not then sort out your driver's and it'll be fine.
Theres a bug in 7 where the driver for ADB cannot be collaborated with fastboot drivers.
Click to expand...
Click to collapse
thanks for the reply, i am on windows 10 and i dont know what is causing the issue when the phone goes in fastboot, but i went on my wife's laptop and got it working within a few minutes after installing adb...
Having similar problem here:
win10x64, drivers installed, USB debugging is enabled.
ADB sees the devices, reboots it correctly with "adb reboot bootloader"
then bootloader menu's shown:
START // RESTART BOOTLOADER // RECOVERY MODE // SHOW BARCODE // POWER OFF
Fastboot mode
Product_name - kona
Variant - SM8 UFS
BOOTLOADER VERSION - (nothing appears here)
BASEBAND VERSION - (nothing appears here)
Serial number - (appears 8-symbol sn)
SECURE BOOT - YES
DEVICE STATE - LOCKED
trying to communicate with smartphone via terminal "fastboot" command doesn't do much:"fastboot devices" doesn't return anything at all, "fastboot oem unlock" just shows <waiting for device>
tried to reinstall drivers
tema_ka said:
Having similar problem here:
win10x64, drivers installed, USB debugging is enabled.
ADB sees the devices, reboots it correctly with "adb reboot bootloader"
then bootloader menu's shown:
START // RESTART BOOTLOADER // RECOVERY MODE // SHOW BARCODE // POWER OFF
Fastboot mode
Product_name - kona
Variant - SM8 UFS
BOOTLOADER VERSION - (nothing appears here)
BASEBAND VERSION - (nothing appears here)
Serial number - (appears 8-symbol sn)
SECURE BOOT - YES
DEVICE STATE - LOCKED
trying to communicate with smartphone via terminal "fastboot" command doesn't do much:"fastboot devices" doesn't return anything at all, "fastboot oem unlock" just shows <waiting for device>
tried to reinstall drivers
Click to expand...
Click to collapse
If you type fastboot reboot what happens? If nothing then either you're device doesn't have usb debugging on, could be the cable/usb slot (some people have had issues with this)
Or its the driver installed for fastboot.
Show hidden devices in device manager you may have multiple devices, remove them all and start over.
Your also need to have used ADB and have trusted the device (prompt will appear on your phone the first time you connect it successfully whilst in your phones system, not fastboot)
for windows 10:
firstly download the google adb driver:
Get the Google USB Driver | Android Studio | Android Developers
The Google USB Driver is required to perform adb debugging on Windows with Google devices.
developer.android.com
then do the following:
1. adb devices [you should see your device ] > adb reboot bootloader
2. device manager > update driver > chose from list [android device]
3. still in device manager got the newly populated Android device and then update driver > choose adb interface
3. fastboot oem unlock
etc.
hope this helps
i have similar problem
then bootloader menu's shown:
START // RESTART BOOTLOADER // RECOVERY MODE // SHOW BARCODE // POWER OFF
Fastboot mode
Product_name - kona
Variant - SM8 UFS
BOOTLOADER VERSION - (nothing appears here)
BASEBAND VERSION - (nothing appears here)
Serial number - (appears 8-symbol sn)
SECURE BOOT - YES
DEVICE STATE - LOCKED
i reached till fastboot. fastboot oem unlock is not working because SECURE BOOT - Yes.
any help will be highly appreciated
shweta007 said:
i have similar problem
then bootloader menu's shown:
START // RESTART BOOTLOADER // RECOVERY MODE // SHOW BARCODE // POWER OFF
Fastboot mode
Product_name - kona
Variant - SM8 UFS
BOOTLOADER VERSION - (nothing appears here)
BASEBAND VERSION - (nothing appears here)
Serial number - (appears 8-symbol sn)
SECURE BOOT - YES
DEVICE STATE - LOCKED
i reached till fastboot. fastboot oem unlock is not working because SECURE BOOT - Yes.
any help will be highly appreciated
Click to expand...
Click to collapse
Secure Boot means your Bootloader is locked.
Setup fastboot correctly, open a cmd window, navigate to fastboot.exe and enter fastboot oem unlock, follow instructions on phone screen