Hi All,
I'm not sure if this problem is in every build but i found it in the FroyoStone Series [Build 07.08.2010].
Problem:
Android can't see some WIFI networks.
Solution:
Android seems only to detect wireless networks that are configured between "Wireless Channels" 1 to 11. WIFI networks configured above channel 11 won't be detected by Android.
what about ad-hoc wireless connection ? how could i connect ?
And this is only HD2 bug or all Android devices?
This issue only occurs on newer builds. My wlan router uses channel 13. I'm able to connect with all old builds from darkstone, etc. But Since mattc 1.4 and FroyoStone I'm not able to connect anymore, because Android is not able to find my network.
By the way: This issue is not solved, because not all of us are able to change the wlan channel of our routers! I'm not sure if this is right, but I read that channel 13 and 14 are not allowed in the USA. Is it possible that our devs used european Androids builds in the previous buidls and now uses an USA Version (new Desire Build)?
is it because of mac address?
is it because of mac address? MAc address is different from win mo in Android
thihaz said:
is it because of mac address? MAc address is different from win mo in Android
Click to expand...
Click to collapse
No, as I told, it works fine with all older Android buils. Only with new one (since 1-2 weeks) it is not working anymore.
sushilange said:
This issue only occurs on newer builds. My wlan router uses channel 13. I'm able to connect with all old builds from darkstone, etc. But Since mattc 1.4 and FroyoStone I'm not able to connect anymore, because Android is not able to find my network.
By the way: This issue is not solved, because not all of us are able to change the wlan channel of our routers! I'm not sure if this is right, but I read that channel 13 and 14 are not allowed in the USA. Is it possible that our devs used european Androids builds in the previous buidls and now uses an USA Version (new Desire Build)?
Click to expand...
Click to collapse
true, i had the same problem. Older build seem not to have the problem
sushilange said:
By the way: This issue is not solved, because not all of us are able to change the wlan channel of our routers! I'm not sure if this is right, but I read that channel 13 and 14 are not allowed in the USA. Is it possible that our devs used european Androids builds in the previous buidls and now uses an USA Version (new Desire Build)?
Click to expand...
Click to collapse
Again true, channel 12 to 14 are not used in the US, Europe goes up to 13, 14 is only used in Japan if i remember properly.
So there are 2 options:
Reuse European Desire Builds or Change you wifi channel if you can. A better option would be reusing the European Desire Builds.
With latest kernel I found new problme with Wifi. It works but after some time stop. I must turn it off and on again.
Hi,
On my Glofiish x650 I've the same Problem with channel 13. Therefore I found
vvvvvv.aspecto-software.com/punbb/viewtopic.php?pid=3346#p3346
For these and other threads about channel 13 the Problem shut are at all devices with built in wifi chip from Marvel.
@ ATomCZ
If you really has no problem with channel 13 maybe you could place here a copy of GSPI8686.dll from your HTC.
(Even it's placed in ROM it is not so easy to copy, may be you or someone next to you now how to do)
@pi_mento
It seems you have an x650 too. Does your x650 connect to channel 13?
Unbelievable, but if it does it would be great to get a copy of your GSPI8686.dll.
What is your ROM Version?
(I'm from Europe and for some reason I have to use channel 13)
Regards
hi i am runnin froyostone v2 and i can connect to a wifi network without a wep encryption password but when i try to connect to my router which i have a wep password on it doesnt respond...it doesnt even say obtaining ip address or connecting...if somebody could help me with this problem i would appreciate it
KroniC89, I had the same problems, I changed the channel to 8 and everything was working
KroniC89, had the same issue, changed the channel to 8 and voila!!
ditsch said:
KroniC89, had the same issue, changed the channel to 8 and voila!!
Click to expand...
Click to collapse
How do I change Channel ?
Don't know if this works for you people but it works for me.
I'm using darkstone HD2Froyo V2.1.
If you go to Settings > Wireless & Network settings > Wi-Fi Settings then press the Menu button (Windows button on the HD2) and choose Advanced then you choose Regulatory domain which lets you choose the number of channels to use, set that to what you need and it should show your network.
I have another problem! I'm using Darkstone Froyobuild with the latest 13. September zImage... since i installed this zImage it always says connecting and 2 seconds later is says scan and then connecting again! Goes like this all the time so WiFi is working but i can't connect to the network...
I already changed the channel to 8 but it's still not working and the network has WPA2!! Any solutions??
Philipp05 said:
I have another problem! I'm using Darkstone Froyobuild with the latest 13. September zImage... since i installed this zImage it always says connecting and 2 seconds later is says scan and then connecting again! Goes like this all the time so WiFi is working but i can't connect to the network...
I already changed the channel to 8 but it's still not working and the network has WPA2!! Any solutions??
Click to expand...
Click to collapse
I have the exact same issue using WEP.
I think my problem with it not connecting its the mac filter I use and the HD2 having a mac address of 001122334455....
The MAC Filter issuse is noch solution for me! I have the filter switched off...
Is there no solution for this problem?
Hi. I have wifi working on channel 18 and no chance to change that.
How can I access this network in my android I can access ch. 1-14?
No problems on WM with this network.
Mike
The answer is that there is no channel 18 in the wifi spectrum that is in common use.
Could you be referring to zigby? that has a channel 18? But I've not seen zigby in a phone.
At the customer place is Cisco router on the wall.
I tried to connect from Android - network was not visible.
A friend of mine got iphone, got connected - it shows ch18.
After couple of hours he connected again - on channel 12 at this time.
i could not find this network whole day.
When I started WM, no problems. Network become visible and I got connected.
So, what can I do to get this network working on Android?
Isn't it problem with wifi-n networks?
I can see other networks, but not this one I want to connect from Android.
Sovtware version i run:
Android 2.2
Mdeejay Froyo NextSense 2.7
kernel 2.6.32.15r7.6-gc08b0fe
Mike
Ok, after some time with google it looks like problem between Android and Cisco Wifi router.
What a crap.
Mike
technicly in the us theres 11 channels, europe has 13, japan has 14.
I am using Android Revolution HD 2.0.11 and when I installed it, I lost my wifi connection (my HD found many other wireless networks on my building, but not mine).
Then I manually set my router to channel 11 and it started working again. Previously, I was using the stock ROM and my router was set to channel 13 and it worked just fine.
I guess this may have to do with the higher channels and the wifi driver.
I just wanted to let the developers know about this, but am not allowed to post in the development forum yet. Maybe this is a known fact, but I couldn't find any information on this.
By the way, in case anyone is wondering, I need to manually set my router to one of the highest channels in order to get a stable wireless connection at home.
Also, my wife's Legend with rooted stock ROM has been working the whole time on channels 13 and 11.
As the title said, it is able to switch on, but my laptop or PS4 is unable to detect it, they both can detect others network so I guess the only problem is the phone.
I've tried to jump from rom to rom, from Ditto Rom(Lollipop) to Ditto Rom(Marshmallow) to SimplRom, but mobile hotspot still not working.
I researched for whole day, online keep mention about 5 GHz or 2.4 GHz in advanced option with broadcast channel. But what I see is only Broadcast channel and it is set on Auto. Hope this info helps.
Please help me !
Current: I'm trying to go back to cynogenmod 13 to test.
UPDATE: I don't know why my phone is visible to my laptop with cm13
Try different wifi channels (not auto)
Hi everybody!
First of all thanks a lot that this great Forum exist. When I have Problems with my phone the first step is to search in this Forum.
Now I have a Problem that I can't solve alone.
For my FPV Cam i Need the 5.8GHz Wifi Network on Channel 149.
When I use a IPhone I can connect the phone with the Copter Cam.
At my Huawei I can't find this Network.
Is it possible to open the channels?
I tryed it as follows:
* I changed the wifi Region Code to US (with root)
* tryed to do the WIFI County Code fix (from your Forum)
* I tryed to edit the wpa_supplicant file to Change the wifi Network to an external wifi OTG Stick which reach this channel
But nothing worked well.
Hopefully anyone can help me.
Thanks and nice regards
Markus
Any news on this? I can't connect to my DJI SPARK either. It just won't see the network
Some P10 Lites can't use 5GhZ wifi.
Depends what model you have. My TL10 can't use it.