Database Users

[Q] Did I turn my G2 into a non-recoverable brick?

Good evening everyone,
I will start off by saying that I really didn't do things by the book this time around. I have run out of ideas even as to what to Google to find similar cases to mine.
I wanted to flash Cyanogenmod onto my G2. Since I already had CWM installed, I loaded the ROM and Gapps. After wiping the phone, I went to flash from the zip. The flash failed. I tried again, and it happened again. I wiped the cache and dalvik again, and tried again. Still no flash.
At this point I go for the reboot only to realize that my phone is now stuck in a bootloop that is contantly landing me back into recovery.
I believe I really screwed up from here as I read about a way to exit the cwm bootloop by flashing a new "exitrecovery.zip" file. Since ADP wouldn't push the file for some reason, I used that function where the phone waits the file to be pushed and flashes it. That succeeded.
The phone switched off (after hanging on CWM for a bit) and now won't do anything at all. No boot logo, nothing. Can't get into CWM anymore either.
The computer brings up a bunch off drives which it wants me to format when I plug the phone in. Only one of them has a folder called "image" on it.
The display switches on, but won't do anything there.
Holding power+up reboots it after a few seconds and so does power=down.
I am thinking of just seeing if I can get it assessed by my carrier, hoping they'll have the tools to just reflash it... somehow. Else, is there a way to potentially fix this?

Back to stock
Put the phone in download mode (vol up while plugging in USB) and use the LG Flash Tool to return to stock. Instructions are posted in General section.

Rule number 1.
ALWAYS MAKE A BACKUP.

bodom_hc said:
Rule number 1.
ALWAYS MAKE A BACKUP.
Click to expand...
Click to collapse
I have a backup I made with CWM.
If that helps, please point me into the right direction to restore it. I fail to see how I can do that without even being able to start cwm up.
missiveusa said:
Put the phone in download mode (vol up while plugging in USB) and use the LG Flash Tool to return to stock. Instructions are posted in General section.
Click to expand...
Click to collapse
I will try this, but the screen never shows anything at all

S5 G900F - Infinite Bootloop, can't access bootloader, flashed with stock roms.. HELP

Hi,
**Long Story**
I'm new here - I refrained from posting as I know a repeat post can p*** people off but I can't find my problem or fix it.
My own Sony was stolen a week ago - My brother in law kindly gave me his old S5 as a back up phone.
He has never had any problems with it EVER. I did a factory reset (from the settings menu) to clear his data and straight away I was in a boot loop (Handset vibrates, Samsung logo displays, blue LED, vibrates, handset switches off.. over and over again) the only way to stop this is to remove the battery. I cannot enter recovery mode but I CAN enter download mode. According to the settings the handset was running the latest version of lollipop.
I took the phone home anyway, thinking I could fix it - leaving the battery out in my pocket.
When I got home, I put the battery in and the phone turned on, unfortunately I forgot to put the sim card in - so I removed the battery, put in the sim card and... Boot Loop!
At this point I was really frustrated so I left the battery out and went to sleep. I woke up in the morning, put the battery in and it worked fine, all day, then all of a sudden the phone switched itself off and now I'm back in a boot loop and this time it isn't wanting to work again.
I have:
- Flashed with stock roms using Odin (5.0 & 4.4.2) - Yes, I used the correct firmware for my handset.
- Flashed with Kies to the latest firmware
- In desperation, tried the "Bash your power button against a hard, flat surface" trick
- Shouted at the handset
None of these have worked and every post I have found says to put the phone in recovery mode, I CANT. When I try, the blue "Recovery Booting" text is displayed, but just restarts anyway...
Weirdly and at random times, twice, the phone has powered on while plugged into my laptop, but the screen is blank, I get message sounds and the soft keys below the screen light up, but the screen is blank.
Any body have any idea?!?!! I'm vaguely techy, however not with this kind of thing. Any help would be much appreciated. What confuses me is there was no problem before I did the factory reset.

didscub said:
Hi,
**Long Story**
I'm new here - I refrained from posting as I know a repeat post can p*** people off but I can't find my problem or fix it.
My own Sony was stolen a week ago - My brother in law kindly gave me his old S5 as a back up phone.
He has never had any problems with it EVER. I did a factory reset (from the settings menu) to clear his data and straight away I was in a boot loop (Handset vibrates, Samsung logo displays, blue LED, vibrates, handset switches off.. over and over again) the only way to stop this is to remove the battery. I cannot enter recovery mode but I CAN enter download mode. According to the settings the handset was running the latest version of lollipop.
I took the phone home anyway, thinking I could fix it - leaving the battery out in my pocket.
When I got home, I put the battery in and the phone turned on, unfortunately I forgot to put the sim card in - so I removed the battery, put in the sim card and... Boot Loop!
At this point I was really frustrated so I left the battery out and went to sleep. I woke up in the morning, put the battery in and it worked fine, all day, then all of a sudden the phone switched itself off and now I'm back in a boot loop and this time it isn't wanting to work again.
I have:
- Flashed with stock roms using Odin (5.0 & 4.4.2) - Yes, I used the correct firmware for my handset.
- Flashed with Kies to the latest firmware
- In desperation, tried the "Bash your power button against a hard, flat surface" trick
- Shouted at the handset
None of these have worked and every post I have found says to put the phone in recovery mode, I CANT. When I try, the blue "Recovery Booting" text is displayed, but just restarts anyway...
Weirdly and at random times, twice, the phone has powered on while plugged into my laptop, but the screen is blank, I get message sounds and the soft keys below the screen light up, but the screen is blank.
Any body have any idea?!?!! I'm vaguely techy, however not with this kind of thing. Any help would be much appreciated. What confuses me is there was no problem before I did the factory reset.
Click to expand...
Click to collapse
Who is your service provider? Is the phone unlocked? Where did you get the stock firmware from?

Cryceratops said:
Who is your service provider? Is the phone unlocked? Where did you get the stock firmware from?
Click to expand...
Click to collapse
Thanks for the reply!
Service Provider - o2 UK
Stock from sanmmob
Phone is not unlocked
I did my best to try & get the firmware for my particular service provider but sammob and a few of the other sites use those awful restricted speed file sharing sites.

didscub said:
Thanks for the reply!
Service Provider - o2 UK
Stock from sanmmob
Phone is not unlocked
I did my best to try & get the firmware for my particular service provider but sammob and a few of the other sites use those awful restricted speed file sharing sites.
Click to expand...
Click to collapse
Did you try the one I linked to you or a different one?

Cryceratops said:
Did you try the one I linked to you or a different one?
Click to expand...
Click to collapse
Only just saw that - I didnt - thank you.
I will try now but may take a while to get back to you while I wait to download.

Try flashing the PIT file along with the stock ROM in ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Extract to .pit - add to PIT section in ODIN, add ROM to AP or PDA section, flash them both at the same time

*Detection* said:
Try flashing the PIT file along with the stock ROM in ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Extract to .pit - add to PIT section in ODIN, add ROM to AP or PDA section, flash them both at the same time
Click to expand...
Click to collapse
Thanks, did that, now the phone has started but it stuck at the first "Powered by Android" screen, not restarting but can't go any further and still cant get into recovery.

didscub said:
Thanks, did that, now the phone has started but it stuck at the first "Powered by Android" screen, not restarting but can't go any further and still cant get into recovery.
Click to expand...
Click to collapse
Try flashing just the ROM again, and then try booting into recovery, and factory reset
Or try flashing TWRP 2.8.7.0 with ODIN, and then boot into recovery and factory reset
Use this guide (Don't worry about the SuperSU part if you don't need root, and ignore the reactivation part as you can't boot the phone yet - start at No.3)
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Are you flashing the latest Lollipop ROM too?
https://mega.nz/#!fVhhzRBC!A79uC8Fgg1mGCZOaujQCzBxcUUN9z_ctVVkigD8ffVM

*Detection* said:
Try flashing just the ROM again, and then try booting into recovery, and factory reset
Or try flashing TWRP 2.8.7.0 with ODIN, and then boot into recovery and factory reset
Use this guide (Don't worry about the SuperSU part if you don't need root, and ignore the reactivation part as you can't boot the phone yet - start at No.3)
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Are you flashing the latest Lollipop ROM too?
https://mega.nz/#!fVhhzRBC!A79uC8Fgg1mGCZOaujQCzBxcUUN9z_ctVVkigD8ffVM
Click to expand...
Click to collapse
flashed TWRP 2.8.7.0 - Doesn't go into revovery:
Recovery is not SEANDROID ENFORCING
Set Warranty Bit : Recovery
I was flashing with G900FXXU1BOJ1_G900FOXA1BOJ1_G900FXXU1BOJ1_HOME.tar.md5

didscub said:
flashed TWRP 2.8.7.0 - Doesn't go into revovery:
Recovery is not SEANDROID ENFORCING
Set Warranty Bit : Recovery
I was flashing with G900FXXU1BOJ1_G900FOXA1BOJ1_G900FXXU1BOJ1_HOME.tar.md5
Click to expand...
Click to collapse
Did you follow the guide I linked?
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Pull the battery after flash, do not allow the phone to reboot first etc?
Because that error is usually associated with you allowing the phone to reboot Automatically after flashing TWRP

*Detection* said:
Did you follow the guide I linked?
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Pull the battery after flash, do not allow the phone to reboot first etc?
Because that error is usually associated with you allowing the phone to reboot Automatically after flashing TWRP
Click to expand...
Click to collapse
Pulled as soon as it said Pass.
This is so confusing, is the Stock firmware that you've linked to in Mega the same as the one I have downloaded?
Will retry with TWRP again. BRB

didscub said:
Pulled as soon as it said Pass.
This is so confusing, is the Stock firmware that you've linked to in Mega the same as the one I have downloaded?
Will retry with TWRP again. BRB
Click to expand...
Click to collapse
BOJ1 yea, same one
Try different versions of ODIN, 3.09 up to 3.10.7 (Maybe even 3.07)

*Detection* said:
Did you follow the guide I linked?
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Pull the battery after flash, do not allow the phone to reboot first etc?
Because that error is usually associated with you allowing the phone to reboot Automatically after flashing TWRP
Click to expand...
Click to collapse
Definitely didt let it reboot & pulled the battery. Tried it twice to make sure.
I am downloading the Stock firmware that you have linked and will try that, is there any reason why it started to reboot constantly after I factory reset? It can't be hardware because there was never a HW problem before I reset it. I don't suppose you want to pop down from Durham and fix it?! lol

didscub said:
Definitely didt let it reboot & pulled the battery. Tried it twice to make sure.
I am downloading the Stock firmware that you have linked and will try that, is there any reason why it started to reboot constantly after I factory reset? It can't be hardware because there was never a HW problem before I reset it. I don't suppose you want to pop down from Durham and fix it?! lol
Click to expand...
Click to collapse
To London? wanna pay the plane fare? lol
If you got that firmware from Sammobile, the one I linked you to is the same one, that's where I got it from, you could try some different droid versions, try a KitKat ROM too
Not sure why it would boot loop after you factory reset it, if reactivation lock was left on, you should still have managed to get to the welcome screen, but then be locked out of the phone until you entered his samsung account login
Sounds like something bugged out during the reset, and didn't reset properly, or corrupted one of the partitions, which the PIT file should have fixed
Stock recovery is cr4p though, I've ended up with a bootloop just clearing caches from it before, and had to flash TWRP to clear them properly, then flash stock on top again just to get it to boot

*Detection* said:
To London? wanna pay the plane fare? lol
If you got that firmware from Sammobile, the one I linked you to is the same one, that's where I got it from, you could try some different droid versions, try a KitKat ROM too
Not sure why it would boot loop after you factory reset it, if reactivation lock was left on, you should still have managed to get to the welcome screen, but then be locked out of the phone until you entered his samsung account login
Sounds like something bugged out during the reset, and didn't reset properly, or corrupted one of the partitions, which the PIT file should have fixed
Stock recovery is cr4p though, I've ended up with a bootloop just clearing caches from it before, and had to flash TWRP to clear them properly, then flash stock on top again just to get it to boot
Click to expand...
Click to collapse
OK - Sorry for the delay but unfortunately I had to do stuff - I would have happily sat and tried to fix it all day.
So, I did spend some time on it earlier and a few things happened.
I reinstalled different firmwares, and also tried TWRP 2.8.7.0 a few times with different versions of Odin but nothing would work.
I reinstalled the firmware BOJ1, nothing
Tried PIT again, nothing
Then, after trying PIT I got the Firmware error and connected to Kies... It worked, but now I just have a blank screen (another seemingly common issue with these paperweights) - Unsure what to do now, the phone is on, i can call it, find it with device manager but the screen is just blank. FML.

didscub said:
OK - Sorry for the delay but unfortunately I had to do stuff - I would have happily sat and tried to fix it all day.
So, I did spend some time on it earlier and a few things happened.
I reinstalled different firmwares, and also tried TWRP 2.8.7.0 a few times with different versions of Odin but nothing would work.
I reinstalled the firmware BOJ1, nothing
Tried PIT again, nothing
Then, after trying PIT I got the Firmware error and connected to Kies... It worked, but now I just have a blank screen (another seemingly common issue with these paperweights) - Unsure what to do now, the phone is on, i can call it, find it with device manager but the screen is just blank. FML.
Click to expand...
Click to collapse
OK, so they phone is working, there's just no display...
OK, try resetting the phone remotely from here first
https://www.google.com/android/devicemanager
If it's not connected to the network - try this
http://forums.androidcentral.com/sa...ory-reset-galaxy-s5-computer.html#post4365754
If that still fails, try flashing a stock KitKat ROM from Sammobile, see if downgrading the OS is a big enough change for it to overwrite whatever is causing the problem
Wondering if TWRP has flashed, but the no screen thing is stopping you from knowing one way or another - if we could get into TWRP, we'd have a lot more options, including custom ROMs
---------- Post added at 10:00 ---------- Previous post was at 09:44 ----------
Uploaded the latest KitKat ROM
Code:
https://mega.nz/#!eIQEAQ6a!ztOhVwFuI2MpD6OBhxC-TtgwUJQCxtwnfDQvFOl3g40

*Detection* said:
OK, so they phone is working, there's just no display...
OK, try resetting the phone remotely from here first
https://www.google.com/android/devicemanager
If it's not connected to the network - try this
http://forums.androidcentral.com/sa...ory-reset-galaxy-s5-computer.html#post4365754
If that still fails, try flashing a stock KitKat ROM from Sammobile, see if downgrading the OS is a big enough change for it to overwrite whatever is causing the problem
Wondering if TWRP has flashed, but the no screen thing is stopping you from knowing one way or another - if we could get into TWRP, we'd have a lot more options, including custom ROMs
---------- Post added at 10:00 ---------- Previous post was at 09:44 ----------
Uploaded the latest KitKat ROM
Code:
https://mega.nz/#!eIQEAQ6a!ztOhVwFuI2MpD6OBhxC-TtgwUJQCxtwnfDQvFOl3g40
Click to expand...
Click to collapse
Thanks,
I'll wait for that to download and try.
So - I used accessibility mode to get into settings and do a factory reset... It was difficult, I even thought that the Dark Screen setting might have mysteriously have been turned on but nope.
Rebooted and got the Bootloader screen with the Samsung logo and Recovery Booting text, after a few minutes the screen went blank and the phone vibrated and then nothing!!! :crying::crying::crying:
I have just put it into download mode (I only know this because the many hours I've spent doing this I noticed that the battery and device goes cool when its in download mode) and will try the KitKat flash once its downloaded - Thank you for that btw.
Its so strange - it cant be an issue with the actual screen because it *sometimes* displays the logo.. What can it be?? Its also odd that from when I originally reset it, it could'nt boot into recovery. I'm worried that everything I have done has screwed it up more? Can the Recovery/Bootloader be "Broken"? Its so confusing, I hate tech that doesn't behave.

didscub said:
Thanks,
I'll wait for that to download and try.
So - I used accessibility mode to get into settings and do a factory reset... It was difficult, I even thought that the Dark Screen setting might have mysteriously have been turned on but nope.
Rebooted and got the Bootloader screen with the Samsung logo and Recovery Booting text, after a few minutes the screen went blank and the phone vibrated and then nothing!!! :crying::crying::crying:
I have just put it into download mode (I only know this because the many hours I've spent doing this I noticed that the battery and device goes cool when its in download mode) and will try the KitKat flash once its downloaded - Thank you for that btw.
Its so strange - it cant be an issue with the actual screen because it *sometimes* displays the logo.. What can it be?? Its also odd that from when I originally reset it, it could'nt boot into recovery. I'm worried that everything I have done has screwed it up more? Can the Recovery/Bootloader be "Broken"? Its so confusing, I hate tech that doesn't behave.
Click to expand...
Click to collapse
Does sound like a possible hardware problem, but unlikely or a huge coincidence that it all started after resetting, so I'd be more inclined to think otherwise
Just remembered about this unbrick image / tutorial
http://forum.xda-developers.com/galaxy-s5/general/g900f-debrick-img-lollipop-t3240626
Might be worth giving that a shot

*Detection* said:
Does sound like a possible hardware problem, but unlikely or a huge coincidence that it all started after resetting, so I'd be more inclined to think otherwise
Just remembered about this unbrick image / tutorial
http://forum.xda-developers.com/galaxy-s5/general/g900f-debrick-img-lollipop-t3240626
Might be worth giving that a shot
Click to expand...
Click to collapse
OK - might be a massive chore rooting and installing busybox.. Worth a shot though. Can I not use it with Odin??

didscub said:
OK - might be a massive chore rooting and installing busybox.. Worth a shot though. Can I not use it with Odin??
Click to expand...
Click to collapse
You don't need busybox, that's for creating your own debrick image, the tutorial stops here:
Flash this Debrick file to your 16GB Micro SD card with Win32DiskImager
*Insert your Micro SD card into your computer (backup any information you may have on it we are going to ERASE, FORMAT it to ex FAT
*Open win32DiskImager
*Navigate to the location where you downloaded the correct Debrick file
*Select your Debrick file by double clicking on it
*In the upper right corner of Win32DiskImager you should make sure that the drive letter assigned to your sd card is selected.
***Which ever drive that is listed will be erased, formatted
*Click write in the bottom right hand side
put the Debrick SD card in the Phone, Pull and Replace the Battery
Plug phone in usb and boot into download mode
yout phone should boot into download mode then flash stock firmware via odin
Download link : https://drive.google.com/file/d/0ByA...ew?usp=sharing
You're saying you can't see anything on screen in download mode, just guessing it's there because it cools down - but that could also mean it's not in any mode
With this method, you might get a display to use, then you can flash normally with ODIN with download mode visible on screen

Help Exposed Installation gone wrong

Hey, so I have had my phone rooted for a long time. I have a Galaxy S5 6.0.1 Marshmallow.
I decided I wanted to get Framework installed so I downloaded the right files and flashed it in TWRP.
My phone took way longer than 10 min to reboot into system so I thought I was stuck in a bootloop and decided to run my phone through TWRP again.
I tried rebooting but that didn't work. I have my phone's backup saved onto a micro SD so I did a factory reset and then tried rebooting.
I got past the rebooting logo and actually got to my lock screen where it asks for my password.
From there, I've been getting spammed with 3 different messages, one saying that IMS service is down, com.sec.vsimservice is down, and WfcService is down.
After I press ok to all 3 of the messages, my phone is still in the lock screen asking for my password but the phone doesn't recognize that im touching the screen to type. After letting the phone stay like that for a few minutes, the lock screen that asks for my password goes away and all I can see is my wallpaper background (no notification panel either) but now the phone recognizes me touching the screen ( I know that because the LED lights up for the windows button and back button )
So basically I decided to go into TWRP and flash my recovery that I had saved on the microSD.
After that didn't work, I've just been going through a series of factory resetting my phone and wiping Dalvik files and then flashing my recovery. My phone is getting unrealistically hot too.
Btw I never downloaded the Exposed Uninstaller from the forum so I tried downloading it onto my pc and then sending the file over to my phone through download mode using Odin so that I could flash the uninstaller through my TWRP but that didn't work because the PDA in Odin does not recognize the uninstaller file.
Please, I really need help and thanks to anyone who tries, it would mean a lot if someone could figure out what I can do. Thanks.

Since you've tried restoring your backup and everything seems to have failed (it sucks, I know) you should try to install a completely stock firmware which you can download from here: http://live.samsung-updates.com/index.php?device=SM-G900I Just make sure you select your exact phone model from the dropdown menu at the top right side as you didn't mentioned which of the 40 S5s you have lol. And after you flash stock firmware and successfully boot up try to restore your backup. If it's still bugged - flash stock again and start off fresh. Let me know how it turns out. I'll help with installing xposed later as well, first let's get your phone running again

Bricked S8s after software update.

Hi. Browsed for ages and always come here for answers.
Here's my problem.
2x S8s. SM-950f.
Updated to most recent software through software update. Both phones were glitchy and crashing and just generally irritating after.
Factory data reset etc. This did not resolve the problems, also led to one of them having issues with FRP (annoying)
Used Odin to try and flash the latest firmware (from sammobile, UK BTU) after flashing both, they reset and powered on. Got stuck at the S8 screen.
Restarted then both were at the "an error occurred during update" screen.
Managed to get back to download screen. Re checked the software and model numbers, even that the bootloader was the correct version etc. All was fine.
Connected to Odin, shows that it is connected, but nothing happens when clicking start.
Now after attempting that, both phones will not power on.
(One will when placed on the wireless charger, but just sticks at S8 screen) and download mode or reset screen can not be accessed. So, not exactly happy. And totally out of ideas
Any suggestions, beyond taking it to a shop to see if anyone can help.

yes .....dont tuch the phones for 24 hours let the battery die ...it will...connect to pc and then try download mode....u may need to press combination for like 1 minute to get to download mode....flash twrp reboot directly into it when odin says successfully .....wipe system data ....dont turn on phone download any custom rom flash and enjoy.....it will trip knox but worth than getting a new board....

Okay, will give that a try.
TWRP?

TWRP install
https://dl.twrp.me/dreamlte/twrp-3.2.3-0-dreamlte.img.tar.html: Download link for twrp SM-G950F (dreamlte)
Just said, wait until your device powers off due battery insufficience. Plug cable and hold at the same moment vol(down)+bixby+power. Then press vol(up) at the warning screen to proceed to odin mode. Let it charging a while like 1 h. Then unplug it and plug it to your pc. In Odin select ap the previous downloaded file. Take your mobile in your hand. With one hand, prepare your fingers to vol(up)+bixby and with the other hand start the flashibg process. Be careful, and take your hand directly from the mouse if you clicked start in odin, and position your one finger to power button, but dont click. If odin start pass, press immidiately the buttons (vol(up)+bixby+power) and let it to start into recovery. If you arrived to recovery, reply to us if not search for help!!!
Good luck
memreb

Still trying to get them on. Powered on to download mode but only for a couple of seconds and switched off again.

Can't get them to power on. Buggered

simonboyle said:
Still trying to get them on. Powered on to download mode but only for a couple of seconds and switched off again.
Click to expand...
Click to collapse
i have the same issue with my s8 but when i boot in download mode the screen goes black but if i press volupe up it connect to odin with black screen you shoud give it a try

Will try that

Okay, downloaded TWRP, can get phone calls nected to Odin but when I extract TWRP it doesn't give a valid file type.
Am I being dumb.
No files appear that Odin will recognise.
Also just shows as "recovery" no .tar or anything

Ignore above. Corrupted download.
Sorted.
Now when flashing TWRP is gets to a fail due to
"Complete (write) fail

Hi you should try flashing official firmware

itac47 said:
Hi you should try flashing official firmware
Click to expand...
Click to collapse
The point of the thread us that I am.unable to do that.
So kinda useless post buddy.
Read the OP.

Anyone want two bootlooped S8s? Hahahaha

simonboyle said:
Anyone want two bootlooped S8s? Hahahaha
Click to expand...
Click to collapse
Not sure what stage your at and maybe some more useless ideas
1. Trying to flash twrp is kinda of useless if you can't get into your system need oem unlock for that.
2. Have you tried taking out Sim card and SD card and reboot.
3. If you can at least boot try smart switch as it has a emergency recovery option.
4. Trying rebooting in safe mode.

All been attempted

Odin flash failed, stuck in Emergency Recovery screen, cannot turn off.

I was going along ok until I made the fatal error of transferring the Magisk patched file to PC via MTP instead of taking the time to re-learn adb, which must have corrupted it. Thus predictably Odin hung and I am in trouble.
Where I am stuck is being unable to turn the phone off to come back in download mode to start over with stock firmware. I have been unable to find any secret button presses, and the battery doesn't seem to want to die leaving me with an $800 paperweight.
I did search around for this first and didn't find any real answers. Has anyone found an effective solution to this problem? Thanks.

fastzombies said:
I was going along ok until I made the fatal error of transferring the Magisk patched file to PC via MTP instead of taking the time to re-learn adb, which must have corrupted it. Thus predictably Odin hung and I am in trouble.
Where I am stuck is being unable to turn the phone off to come back in download mode to start over with stock firmware. I have been unable to find any secret button presses, and the battery doesn't seem to want to die leaving me with an $800 paperweight.
I did search around for this first and didn't find any real answers. Has anyone found an effective solution to this problem? Thanks.
Click to expand...
Click to collapse
If Odin recognizes you device, you can flash firmware in emergency recovery.

Cindysmith0994 said:
If Odin recognizes you device, you can flash firmware in emergency recovery.
Click to expand...
Click to collapse
Thank you, but the PC won't recognize the device. What does happen is the emergency recorevy screen tries to come up. I tried starting in download mode with bixby+vol down then USB. I did get the battery low enough where I don't get the teal screen of death anymore, perhaps it is too low for USB to work? What I was hoping for was the charging animation but no luck. Surely this is just a software problem and there is a way out.

fastzombies said:
Thank you, but the PC won't recognize the device. What does happen is the emergency recorevy screen tries to come up. I tried starting in download mode with bixby+vol down then USB. I did get the battery low enough where I don't get the teal screen of death anymore, perhaps it is too low for USB to work? What I was hoping for was the charging animation but no luck. Surely this is just a software problem and there is a way out.
Click to expand...
Click to collapse
Did you try getting into recovery and perform a data factory reset and then see what happens?

Just load the stock firmware BL, Ap, cp and home csc into Odin if you see emergency teal screen. The emergency screen will start loading
Black screen ....Perhaps your battery is dead?

Thank you all for the replies. I had let the battery get low in a misguided attempt (based on advice elsewhere) to get it to shut off. I had to let it charge a while for it to wake up enough for PC to see it. Then I was able to flash in Emergency Recovery mode.
Thank you for the help.

fastzombies said:
Thank you all for the replies. I had let the battery get low in a misguided attempt (based on advice elsewhere) to get it to shut off. I had to let it charge a while for it to wake up enough for PC to see it. Then I was able to flash in Emergency Recovery mode.
Thank you for the help.
Click to expand...
Click to collapse
Glad you got your device up and running ?

Maybe someone can help me. I seemed to have borked my phone. I kept getting "Google is Stopping" with no way to fix it, so I tried reflashing my firmware in odin. After I loaded all the files and hit start, I realized I didn't untick auto reboot, so I tried aborting the installation and ended up with screen (I've had it before and got out of it by still flashing in Odin, but now, if I try to reflash firmware while in this screen, it's stuck on SYSTEM in odin.
Any help appreciated!

Try this
That is where I got stuck. Are you trying to flash stock or patched firmware? I had to start over with stock as I copied the patched via MTP instead of adb and it got corrupted.
I think what I did was unplug and reset Odin. Wait for screen to turn off, then make sure it is at least 80% charged. Then Bixby + Vol Down + plug in and you will go back to this screen. Then I was able to flash stock. I had to go so far as to re-lock bootloader and flash stock again since my "OEM Unlocking" was not just greyed out but missing. Since then I've had no time to try again, but at least I have a working phone.
This is my anecdotal procedure, can't say if it is the right or best one.

Hi All,
I was trying to flash the latest firmware for my device (G9750ZCU2ASG4) and during the odin process, my computer restarted which failed the update halfway through. I rebooted the computer, tried again, and it was trying to establish a connection for a really long time, so I disconnected my phone from the USB port on my computer, and held Power and Volume Down to try and force reboot the phone. I was going to try and go back into download mode to restart the process. My phone mentioned something about needing to do an emergency recovery, but I continued to hold down the power and volume down keys and then everything went black on the phone.
I've tried multiple USB cords, all of the button commands known for the device, and have even tried to perform the emergency mode recovery on my device, but it seems like it's in some sort of locked state; What I mean is the phone is stuck on a black screen. I can't "boot" into recovery or into download mode. The phone doesn't even vibrate when I hold the power button or power and down to try and force reboot it. Odin doesn't recognize the phone when I plug it into the computer nor does the device manager on my windows computer.
Does anyone have any experience with this sort of issue or any idea of what else I can do to try and get into download mode to flash my firmware again? All help, suggestions, or comments regarding this are much appreciated.

Sounds like the battery is dead

Hi Dude, I am struggling with the same problem, read this post and it came to me, had to come back and give you the solution.
Press bixby+volume down, IMMEDIATELY after the screen goes off, hold volume up and down while connecting the USB cable super fast.
You have got like 10ms to do it
Otherwise it just goes back to the AVB FAIL screen

Ran into this issue, none of the above worked for me.
This is how I resolved:
1) Placed phone on wireless charging mat and let it boot to emergency recovery screen
2) Load TWRP into AP slot of Odin and leave the window open on your computer ready to flash
3) Connect phone to computer whilst it's on the mat and press start in Odin as soon as your device appears
It may fail a few times but if your quick you can install TWRP.
4) Now boot into recovery and let your phone charge to a reasonable level (above 20%)
5) Boot into Download mode and flash your desired rim via Odin