[Q]CWM Recovery - What are the differences? - Galaxy S 4 Q&A, Help & Troubleshooting

Hi all =)
Since I got my GT-i9505 I've been experimenting with different Roms. Of course, this can't be done without a good recovery.
When I started, I used i9505 TWRP 2.6.0.0 and was really happy with it. But after flashing a few Roms, I had more and more errors/bugs and decided to try another recovery.
I'm now using CWM based recovery 6.0.3.2 for i9505 and it works nicely. But when I tried to flash CM 10.2 i had a "Status 7" error and my device suddenly rebooted and now I am concerned that it might happen again.
So now I'm wondering, which is the most reliable recovery for our GT-i9505? And what is the difference between the CWM based Recovery and the one from http://www.clockworkmod.com/rommanager ? The "original" recovery seems to be more up to date, but can I use my backups with it, too?

Chelonee said:
Hi all =)
Since I got my GT-i9505 I've been experimenting with different Roms. Of course, this can't be done without a good recovery.
When I started, I used i9505 TWRP 2.6.0.0 and was really happy with it. But after flashing a few Roms, I had more and more errors/bugs and decided to try another recovery.
I'm now using CWM based recovery 6.0.3.2 for i9505 and it works nicely. But when I tried to flash CM 10.2 i had a "Status 7" error and my device suddenly rebooted and now I am concerned that it might happen again.
So now I'm wondering, which is the most reliable recovery for our GT-i9505? And what is the difference between the CWM based Recovery and the one from http://www.clockworkmod.com/rommanager ? The "original" recovery seems to be more up to date, but can I use my backups with it, too?
Click to expand...
Click to collapse
Hi,
None of the recoveries are 100% yet.
Look HERE
I use PhilZ.
Most of the time it works.
Some ROMS will give me error status 7.
Just wipe clean and flash again.
Sometimes , it has taken 3 goes to get a ROM to load.

malybru said:
Hi,
None of the recoveries are 100% yet.
Look HERE
I use PhilZ.
Most of the time it works.
Some ROMS will give me error status 7.
Just wipe clean and flash again.
Sometimes , it has taken 3 goes to get a ROM to load.
Click to expand...
Click to collapse
Hi there =)
Okay, good to know. I was just wondering if there is something like the best recovery since all seem to have their little bugs and errors.
And since I soft bricked my device last week, I just want to be super careful now.

Chelonee said:
Hi there =)
Okay, good to know. I was just wondering if there is something like the best recovery since all seem to have their little bugs and errors.
And since I soft bricked my device last week, I just want to be super careful now.
Click to expand...
Click to collapse
Hi,
There is no "Best".
Otherwise everyone would be using it.
You will not brick your phone installing any of these recoveries.

Related

Root problems, flashing problems, problems!!!

Hi,
this is really starting to get on my nerves and now I feel like just giving up.
I spent 2 hours trying to get the thing to flash a recovery, just refused to work and eventually it worked. (factory reset several times, several "rooting" procedures).
So got that working, now I downloaded liquid smooth and tried to flash it, it failed to mount /system and /efs then black screened, phone is completely unresponsive.
Is this bricked? why did it just black screen on the recovery?
If i somehow get this to respond, what is causing this failure to mount?
Gibbo3771 said:
Hi,
this is really starting to get on my nerves and now I feel like just giving up.
I spent 2 hours trying to get the thing to flash a recovery, just refused to work and eventually it worked. (factory reset several times, several "rooting" procedures).
So got that working, now I downloaded liquid smooth and tried to flash it, it failed to mount /system and /efs then black screened, phone is completely unresponsive.
Is this bricked? why did it just black screen on the recovery?
If i somehow get this to respond, what is causing this failure to mount?
Click to expand...
Click to collapse
Hi,
Which recovery did you manage to install?
malybru said:
Hi,
Which recovery did you manage to install?
Click to expand...
Click to collapse
Thank you for the reply, I managed to get TWRP installed.
I also managed to get the phone to start up, doing a restore to my stock rom at the moment.
It just never went passed the part where it mounts /system and /efs.
Also, I rooted the device using CF autoroot and it was a nightmare, it took 4-5 tries before it actually worked, spent an hour trying to get CWM working but it would just constantly boot into android recovery!
Any ideas how to fix the mount problem?
Gibbo3771 said:
Thank you for the reply, I managed to get TWRP installed.
I also managed to get the phone to start up, doing a restore to my stock rom at the moment.
It just never went passed the part where it mounts /system and /efs.
Also, I rooted the device using CF autoroot and it was a nightmare, it took 4-5 tries before it actually worked, spent an hour trying to get CWM working but it would just constantly boot into android recovery!
Any ideas how to fix the mount problem?
Click to expand...
Click to collapse
Hi,
Recoveries for the S4 are not all 100% yet.
I have had success with PhilZ.
Sometimes it takes more than one go to install something.
What variant do you have?
malybru said:
Hi,
Recoveries for the S4 are not all 100% yet.
I have had success with PhilZ.
Sometimes it takes more than one go to install something.
What variant do you have?
Click to expand...
Click to collapse
Varient of the recovery? not sure, latest one? lol.
the Rom version I was trying to flash was Liquid Smooth 2.9 i believe.
How safe is it to flash from one recovery to another? this will not removed my root in anyway will it? will I also have to create a new backup or will philz recongize the one that TWRP made
Gibbo3771 said:
Varient of the recovery? not sure, latest one? lol.
the Rom version I was trying to flash was Liquid Smooth 2.9 i believe.
How safe is it to flash from one recovery to another? this will not removed my root in anyway will it? will I also have to create a new backup or will philz recongize the one that TWRP made
Click to expand...
Click to collapse
Hi,
What variant of the phone do you have?
Flashing one recovery over another is fine.
It will not affect root.
Nandroids should be fine between the recoveries,but it would not hurt to do another.
malybru said:
Hi,
What variant of the phone do you have?
Flashing one recovery over another is fine.
It will not affect root.
Nandroids should be fine between the recoveries,but it would not hurt to do another.
Click to expand...
Click to collapse
I have the i9505. Tmobile.
This part of the forums is pretty dead compared to the other S4 areas lol!

Phone stuck on "Samsung - Custom" screen after creating TWRP backup. Help please?

Phone stuck on "Samsung - Custom" screen after creating TWRP backup. Help please?
I have an ATT S4, that has had CM 10.1 on it running flawlessly pretty much since nightlies started to get released. Decided to try going back to some TW based ROMs. Running the latest nightly, loaded up TWRP, created a backup, as I usually do before swapping roms. Created the backup fine, now it won't boot, it just sits at the Samsung screen with the lock and Custom message. Wiped cache\dalvic, even tried restoring from the backup I just created. Nothing. Tried it with the phone plugged into the computer and without being plugged in (I think I recall it being plugged into USB could cause issues in the past), and still nada. Tried pulling the battery and rebooting about 10 times. Can get into recovery and odin mode perfectly fine still. Any suggestions or ideas? Thanks
Simonzi said:
I have an ATT S4, that has had CM 10.1 on it running flawlessly pretty much since nightlies started to get released. Decided to try going back to some TW based ROMs. Running the latest nightly, loaded up TWRP, created a backup, as I usually do before swapping roms. Created the backup fine, now it won't boot, it just sits at the Samsung screen with the lock and Custom message. Wiped cache\dalvic, even tried restoring from the backup I just created. Nothing. Tried it with the phone plugged into the computer and without being plugged in (I think I recall it being plugged into USB could cause issues in the past), and still nada. Tried pulling the battery and rebooting about 10 times. Can get into recovery and odin mode perfectly fine still. Any suggestions or ideas? Thanks
Click to expand...
Click to collapse
There are no less than a dozen similar threads about similar problems already. Have you looked at those threads for a possible solution yet? You can find them by using the search function or better yet just doing a visual search of the first few pages of the "General" and "Q&A" sections. Good luck.
Sounds like a ROM and kernel issue. Try flashing a ROM with a loki'd kernel.
Tylorw1
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Tylorw1 said:
Sounds like a ROM and kernel issue. Try flashing a ROM with a loki'd kernel.
Tylorw1
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
I don't see how that could be the case. I didn't flash anything. I just loaded TWRP, created a backup, and rebooted my phone. No ROM\kernel change. Nothing more than creating a backup in TWRP.
scott14719 said:
There are no less than a dozen similar threads about similar problems already. Have you looked at those threads for a possible solution yet? You can find them by using the search function or better yet just doing a visual search of the first few pages of the "General" and "Q&A" sections. Good luck.
Click to expand...
Click to collapse
I tried searching, the closest one I could find on the first few pages was this one. I just didn't see any specific to my situation because nothing was flashed. Like my response to Tylorw1, all I did was boot into recovery, create a backup, and reboot my phone. Didn't flash a ROM, change a kernel, format anything, etc...
I has this same problem... It happened after every single reboot after flashing various ROMs or anything.. I gave up and went back to CWM and haven't had the problem since :good:
Sent from my SGH-I337 using xda app-developers app
Simonzi said:
I have an ATT S4, that has had CM 10.1 on it running flawlessly pretty much since nightlies started to get released. Decided to try going back to some TW based ROMs. Running the latest nightly, loaded up TWRP, created a backup, as I usually do before swapping roms. Created the backup fine, now it won't boot, it just sits at the Samsung screen with the lock and Custom message. Wiped cache\dalvic, even tried restoring from the backup I just created. Nothing. Tried it with the phone plugged into the computer and without being plugged in (I think I recall it being plugged into USB could cause issues in the past), and still nada. Tried pulling the battery and rebooting about 10 times. Can get into recovery and odin mode perfectly fine still. Any suggestions or ideas? Thanks
Click to expand...
Click to collapse
what version of twrp? if it is 2.6.?.? then get off of it, also, what I did was pull battery for 3min, it booted fine....go back to early version of twrp...
STVERDI said:
I has this same problem... It happened after every single reboot after flashing various ROMs or anything.. I gave up and went back to CWM and haven't had the problem since :good:
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I've wanted to go back to CWM. That's what I had on my S3. Only thing stopping me, is all my nandroid backups for my S4 are done with TWRP, and I don't want to run into a situation where I need them, and them not being compatible
TheAxman said:
what version of twrp? if it is 2.6.?.? then get off of it, also, what I did was pull battery for 3min, it booted fine....go back to early version of twrp...
Click to expand...
Click to collapse
Nope, still on 2.5.0.2. Finally, after a third complete wipe/format and restore from the back I had created (the one that started the whole issue), it works fine. Such a huge pain in the ass.
a user had to boot back into twrp and wipe data/factory reset yesterday to fix this issue.
Simonzi said:
I've wanted to go back to CWM. That's what I had on my S3. Only thing stopping me, is all my nandroid backups for my S4 are done with TWRP, and I don't want to run into a situation where I need them, and them not being compatible
Nope, still on 2.5.0.2. Finally, after a third complete wipe/format and restore from the back I had created (the one that started the whole issue), it works fine. Such a huge pain in the ass.
Click to expand...
Click to collapse
And you have to be ****ing kidding me. I rebooted into recovery while typing my initial response, just to verify I was still on the 2.5.x.x TWRP. Booted up TWRP, verified that, choose "Reboot System", and same thing. Back to sitting at the Samsung screen. Nandroid backups or not, ditching TWRP as soon as I get it able to boot back up.
Even worse off now than when I started. After my last post, where my phone was doing the same "stuck on Samsung logo" thing, just from booting into TWRP, I decided to swap to a different recovery. Searched for "switch from TWRP to CWM", and found my own post I had made a few months ago, but never went through.
Following those instructions now, I decided on the PhilZ CWM. Head over to that thread, grab the loki'd zip, load up TWRP, and flash the zip. Now I can't even boot into recovery!! It just freezes on the Samsung screen with the blue "recovery booting" text.
Can still get into download mode, so I tried using ODIN to flash PhilZ jflteatt.tar.md5 file, and it fails.
At this point, waiting for the stock 1.6 firmware package to download, so I can just ODIN that.
If anyone has any other suggestions though, they'd be great. Have an hour to try while waiting for that to download
somebody had mentioned this...
http://forum.xda-developers.com/showpost.php?p=44629460&postcount=8
make sure you have the correct firmware and proceed as you are. likely your best bet.
Simonzi said:
Even worse off now than when I started. After my last post, where my phone was doing the same "stuck on Samsung logo" thing, just from booting into TWRP, I decided to swap to a different recovery. Searched for "switch from TWRP to CWM", and found my own post I had made a few months ago, but never went through.
Following those instructions now, I decided on the PhilZ CWM. Head over to that thread, grab the loki'd zip, load up TWRP, and flash the zip. Now I can't even boot into recovery!! It just freezes on the Samsung screen with the blue "recovery booting" text.
Can still get into download mode, so I tried using ODIN to flash PhilZ jflteatt.tar.md5 file, and it fails.
At this point, waiting for the stock 1.6 firmware package to download, so I can just ODIN that.
If anyone has any other suggestions though, they'd be great. Have an hour to try while waiting for that to download
Click to expand...
Click to collapse
Stock 1.6 firmware package?
Make sure you get the correct firmware? Go to SamMobile and get the stock firmware from there or go to Adam Outlers "Stock firmware ODIN" thread in the General section (the AMDL firmware link is in that thread you just have to look for it).
scott14719 said:
Stock 1.6 firmware package?
Make sure you get the correct firmware? Go to SamMobile and get the stock firmware from there or go to Adam Outlers "Stock firmware ODIN" thread in the General section (the AMDL firmware link is in that thread you just have to look for it).
Click to expand...
Click to collapse
Yeah, I meant 1.6gb firmware package. Just forgot the "gb". That's what I'm currently downloading, but trying to recover it with Kies while waiting.
I would like to report I had the same problem.
After changing roms and making a nandroid, and then deciding to switch roms again, I ran into the stuck at Samsung Custom with a lock boot screen. Most roms would boot up once, but a restart or power down would lead to being stuck. I was flashing through TWRP.
I went into TWRP and flashed OUDHS recovery which overrode TWRP and wiped/flashed through OUDHS a new rom.
Problem solved.
S3 at&t stuck in TWRP booting screen.
xBeerdroiDx said:
a user had to boot back into twrp and wipe data/factory reset yesterday to fix this issue.
Click to expand...
Click to collapse
Im new to custom roms, I pressed ok for an update on my phone, after the update was complete my phone shut off and booted into TWRP and now I can't get back to my android screen nor make calls etc. HELPPPPPPPP PLEASSSSSEE I have been trying to fix my phone since july and I have been using this cheap phone that don't even get internet. I have an S3 1747 at&t
Lnjames said:
Im new to custom roms, I pressed ok for an update on my phone, after the update was complete my phone shut off and booted into TWRP and now I can't get back to my android screen nor make calls etc. HELPPPPPPPP PLEASSSSSEE I have been trying to fix my phone since july and I have been using this cheap phone that don't even get internet. I have an S3 1747 at&t
Click to expand...
Click to collapse
Wrong forum. Please go to the s3 section with your question.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Had this problem just now, solved it by fixing permissions.
I am running an MDL based S4, and screwed the pooch. I was going to wipe the internal storage and made the mistake of doing it through TWRP 2.5. Now, I have the same problem of being stuck on the custom boot screen. I have tried to change from TWRP to OUDHS Recovery, but still boot loops to Custom screen. I have tried fresh installs of 4.2 ROMs and 4.4.2 Google Editions. Do I need to flash via ODIN?
Flame away....I know better than this!!!!
Help would be greatly appreciated.
Sent from my GT-N8013 using Tapatalk 4

s4 stuck on reboot

I'm running an S4 and have this very weird issue where after installing a custom rom, the phone would reboot and load the rom successfully, but if I ever reboot it, it never wants to go past the Samsung logo.
If I try entering TWRP and fixing permissions or factory reset, it just comes up with errors and fails. The only way around it is to format data, then reflash the rom.
But now I have a nandroid backup so everytime I reboot, I basically have to reflash the rom.. It's happened on at least 2 roms!
I've used the search function on the forums and found a thread was inconclusive so I've made this thread.
Thanks in advance
(This is my first Android phone too, so I'm not 100% familiar with all the different software and techniques, but I can definitely learn!)
Try flashing the ROM with the latest stock CWM. TWRP can cause issues.
Kesh09 said:
I'm running an S4 and have this very weird issue where after installing a custom rom, the phone would reboot and load the rom successfully, but if I ever reboot it, it never wants to go past the Samsung logo.
If I try entering TWRP and fixing permissions or factory reset, it just comes up with errors and fails. The only way around it is to format data, then reflash the rom.
But now I have a nandroid backup so everytime I reboot, I basically have to reflash the rom.. It's happened on at least 2 roms!
I've used the search function on the forums and found a thread was inconclusive so I've made this thread.
Thanks in advance
(This is my first Android phone too, so I'm not 100% familiar with all the different software and techniques, but I can definitely learn!)
Click to expand...
Click to collapse
go into the wipe options on twrp - go to advanced and select - cache, dalvik, system, data - swipe
then do a normal full wipe
reflash the chosen rom
power off rather than reboot
then power up
something gets fracked with the wipes somewhere and thats how i fixed it.
either that or flash philz recovery through odin and do a "new rom" wipe
Gotcher said:
Try flashing the ROM with the latest stock CWM. TWRP can cause issues.
Click to expand...
Click to collapse
For some reason, whenever I install CWM, it keeps getting stuck at "recovery booting" and once in maybe 30 times it works, haven't got it to work in a while.. Not sure what's happening, but if I flash TWRP again, it boots up fine. Am I doing anything wrong? Using Philz touch..
scottyf79 said:
go into the wipe options on twrp - go to advanced and select - cache, dalvik, system, data - swipe
then do a normal full wipe
reflash the chosen rom
power off rather than reboot
then power up
something gets fracked with the wipes somewhere and thats how i fixed it.
either that or flash philz recovery through odin and do a "new rom" wipe
Click to expand...
Click to collapse
This hasn't worked for me, and yeah, I can't seem to get CWM to like my phone..
Kesh09 said:
For some reason, whenever I install CWM, it keeps getting stuck at "recovery booting" and once in maybe 30 times it works, haven't got it to work in a while.. Not sure what's happening, but if I flash TWRP again, it boots up fine. Am I doing anything wrong? Using Philz touch..
This hasn't worked for me, and yeah, I can't seem to get CWM to like my phone..
Click to expand...
Click to collapse
try flashing the rom twice in succession. it will stick eventually but its just getting the right combo. these S4's are a right pain in the ass just now.
also another option would be downloading a rom with Aroma installer onto a micro sd and see if that gets you out of the problem. ive found on other devices ive had that a rom with Aroma can sometimes get you moving (id suggest Omega rom as a good solid base)
scottyf79 said:
try flashing the rom twice in succession. it will stick eventually but its just getting the right combo. these S4's are a right pain in the ass just now.
also another option would be downloading a rom with Aroma installer onto a micro sd and see if that gets you out of the problem. ive found on other devices ive had that a rom with Aroma can sometimes get you moving (id suggest Omega rom as a good solid base)
Click to expand...
Click to collapse
The rom I'm flashing (twice) now is Omega actually!
I'll see how this goes! Hoping it's okay!
..
try to install another rom clean & stable and do full wipe or trust me the best to turn the phone to default firmware.
Kesh09 said:
The rom I'm flashing (twice) now is Omega actually!
So are you suggesting I install Omega, get it run, then install Aroma installer and reinstall it?
Click to expand...
Click to collapse
no i just meant flash the rom twice IF it didnt have Aroma.
try GoldenEye rom from micro sd (obviously downloaded and placed on the card through a pc and put back in the phone).
Or as above - you might have to start from scratch and use Odin to revert back to stock and re-root etc again.
Although i said Aroma sometimes helps, being honest it was a rom with Aroma that started causing me a similar issue in the first place (Not Omega or Foxhound though)
No luck guys... I think I'd rather start from a stock rom too. When I created my stock rom backup, it was through nandroid and an CWM format, but CWM did work, it froze when it was checking for MD5 or something...
But now I'm trying to find the right firmware for my phone, is there any thing I need to look out for? Gt-i9505 from Australia?
http://forum.xda-developers.com/showthread.php?t=2265477
In that thread, there's two of them, I'm downloading the one closest to when I bought it which was June

[Q] How can I remove custom recovery? Ran into some problems and want to "start over"

[Q] How can I remove custom recovery? Ran into some problems and want to "start over"
So I recently rooted my VZW G2 thanks to wyrdtrtle on IRC (HUGE thanks, btw). I had lots of issues and he helped me out for about 3ish hours. It ended off with me asking him which recovery I should use (CWM vs TWRP) and he said he uses TWRP for it's touch interface, so I went ahead and installed it via FreeGee. Fast forward to yesterday night, I decide to flash CM 10.2 (I'd prefer starting out on a guaranteed stable build instead of a nightly since I've been on Android since January and know very little). I find and watch a tutorial (can't link since i am a new user) and proceed to download the CM10.2 zip and the gapps. After a few seconds, it fails. I try looking for more tutorials, specifically for G2 and CM and it still fails. I then tried installing CWM (maybe TWRP was the problem?) via FreeGee and again, flashing failed. I thought it might be CM and I was going to try ParanoidAndroid or Mahdi (think that's the name) and see if that works but I now want to remove both recoveries and "restart" as if I had just rooted my phone. Decided to post here before I potentially brick my phone. Sorry for wall of text, but any help is appreciated.
_tyler_ said:
So I recently rooted my VZW G2 thanks to wyrdtrtle on IRC (HUGE thanks, btw). I had lots of issues and he helped me out for about 3ish hours. It ended off with me asking him which recovery I should use (CWM vs TWRP) and he said he uses TWRP for it's touch interface, so I went ahead and installed it via FreeGee. Fast forward to yesterday night, I decide to flash CM 10.2 (I'd prefer starting out on a guaranteed stable build instead of a nightly since I've been on Android since January and know very little). I find and watch a tutorial (can't link since i am a new user) and proceed to download the CM10.2 zip and the gapps. After a few seconds, it fails. I try looking for more tutorials, specifically for G2 and CM and it still fails. I then tried installing CWM (maybe TWRP was the problem?) via FreeGee and again, flashing failed. I thought it might be CM and I was going to try ParanoidAndroid or Mahdi (think that's the name) and see if that works but I now want to remove both recoveries and "restart" as if I had just rooted my phone. Decided to post here before I potentially brick my phone. Sorry for wall of text, but any help is appreciated.
Click to expand...
Click to collapse
how'd you root your phone first? through what?
MuzakaTheBeast said:
how'd you root your phone first? through what?
Click to expand...
Click to collapse
I followed the IORoot22 instructions along with clarification from wyrdtrtle on IRC
Try patching cm10.2 with freegee in the menu with three lines and you should see something called update Loki in zip tap that and go to where you placed cm and tap cm and it will take a couple minutes to patch if it fails try to redownload cm but do not skip previous steps it will softbrick your phone.
I DO NOT take responsibility for bricks soft/hard bricks when you root,flash ROMs you risk bricking your device
Happy modding welcome to the world of android
Sent from my LG-VS980 using Tapatalk
spinninbsod said:
Try patching cm10.2 with freegee in the menu with three lines and you should see something called update Loki in zip tap that and go to where you placed cm and tap cm and it will take a couple minutes to patch if it fails try to redownload cm but do not skip previous steps it will softbrick your phone.
I DO NOT take responsibility for bricks soft/hard bricks when you root,flash ROMs you risk bricking your device
Happy modding welcome to the world of android
Sent from my LG-VS980 using Tapatalk
Click to expand...
Click to collapse
Oh, right, I remember reading that Loki bypasses locked Bootloaders (which somehow led me to think only CWM had Loki support and would work when TWRP didn't). I'm gonna try this now.
spinninbsod said:
Try patching cm10.2 with freegee in the menu with three lines and you should see something called update Loki in zip tap that and go to where you placed cm and tap cm and it will take a couple minutes to patch if it fails try to redownload cm but do not skip previous steps it will softbrick your phone.
I DO NOT take responsibility for bricks soft/hard bricks when you root,flash ROMs you risk bricking your device
Happy modding welcome to the world of android
Sent from my LG-VS980 using Tapatalk
Click to expand...
Click to collapse
Didn't work. Still get an error saying it failed
_tyler_ said:
Didn't work. Still get an error saying it failed
Click to expand...
Click to collapse
did you try redownloading cm 10.2 downloads get corrupted sometimes it is very annoying
spinninbsod said:
did you try redownloading cm 10.2 downloads get corrupted sometimes it is very annoying
Click to expand...
Click to collapse
apparently the 10.2 rom i was trying to flash wasn't compatible with my phone (not too sure on the specifics) but I tried the latest nightly for cm11 and I've been running it since last night.

[Q] Help a noob, cannot boot after trying to flash stock rom

So I'm pretty desperate and I apologize if similar info was posted somewhere else. I've been researching several hours but couldn't find anything.
I originally installed CM11 and decided to experiment with a different rom TriForce ROM [TouchWiz]. I put the zip file on my SD card and booted into clockworkmod it gave an error of bad zip. I tried different usb port to transfer the zip, downloaded it multiple times with no result. So I decided to try a different rom Stock_Rooted_Deodexed_MF9_Rom.zip. The installation finished but the phone would not boot.
Recently I flashed the stock rom from odin, it finished successfully but still not boot, Galaxy sreen lights up quickly and that's it.
rmngorelov said:
So I'm pretty desperate and I apologize if similar info was posted somewhere else. I've been researching several hours but couldn't find anything.
I originally installed CM11 and decided to experiment with a different rom TriForce ROM [TouchWiz]. I put the zip file on my SD card and booted into clockworkmod it gave an error of bad zip. I tried different usb port to transfer the zip, downloaded it multiple times with no result. So I decided to try a different rom Stock_Rooted_Deodexed_MF9_Rom.zip. The installation finished but the phone would not boot.
Recently I flashed the stock rom from odin, it finished successfully but still not boot, Galaxy sreen lights up quickly and that's it.
Click to expand...
Click to collapse
Restore from nandroid backup. I hope you made one. Try going into recovery do a factory reset and wipe all cache and data and what not and then install a ROM from Odin.
rmngorelov said:
So I'm pretty desperate and I apologize if similar info was posted somewhere else. I've been researching several hours but couldn't find anything.
I originally installed CM11 and decided to experiment with a different rom TriForce ROM [TouchWiz]. I put the zip file on my SD card and booted into clockworkmod it gave an error of bad zip. I tried different usb port to transfer the zip, downloaded it multiple times with no result. So I decided to try a different rom Stock_Rooted_Deodexed_MF9_Rom.zip. The installation finished but the phone would not boot.
Recently I flashed the stock rom from odin, it finished successfully but still not boot, Galaxy sreen lights up quickly and that's it.
Click to expand...
Click to collapse
Make sure you're using roms for your version of your phone. the MF9 bootloader is really old and probably wont install anymore. My phone did this before and I thought I bricked it, but I kid you not I took the battery out and removed the SIM card and rebooted and it booted up just fine. May not work for you, but I suggest you go back to update stock firmware then try again. If you're using the triband model, there's a post around here somewhere with confirmed roms that wont brick your device. I'm currently using the Google Play Edition Stock ROM and it's working GREAT.
Link for new firmware (NG5 Firmware): https://mega.co.nz/#F!0JdRkIZR!AqqKdbvba_Hpg5VrCmrbPw
i7vSa7vi7y said:
Restore from nandroid backup. I hope you made one. Try going into recovery do a factory reset and wipe all cache and data and what not and then install a ROM from Odin.
Click to expand...
Click to collapse
I restored to this stock ROM before and everything worked well. Currently I can't boot into recovery, Samsung flashes once and that's it, that's why I'm desperate the only thing I can do is boot in to download mode for odin.
silentdeath631 said:
Make sure you're using roms for your version of your phone. the MF9 bootloader is really old and probably wont install anymore. My phone did this before and I thought I bricked it, but I kid you not I took the battery out and removed the SIM card and rebooted and it booted up just fine. May not work for you, but I suggest you go back to update stock firmware then try again. If you're using the triband model, there's a post around here somewhere with confirmed roms that wont brick your device. I'm currently using the Google Play Edition Stock ROM and it's working GREAT.
Link for new firmware (NG5 Firmware):
Click to expand...
Click to collapse
Does it matter that I can't get into recovery to clear the cache first before trying new roms?
silentdeath631 said:
Make sure you're using roms for your version of your phone. the MF9 bootloader is really old and probably wont install anymore. My phone did this before and I thought I bricked it, but I kid you not I took the battery out and removed the SIM card and rebooted and it booted up just fine. May not work for you, but I suggest you go back to update stock firmware then try again. If you're using the triband model, there's a post around here somewhere with confirmed roms that wont brick your device. I'm currently using the Google Play Edition Stock ROM and it's working GREAT.
Link for new firmware (NG5 Firmware):
Click to expand...
Click to collapse
Maybe I'm doing something foolish but every time I try to download files from the link you gave I get a decryption error so I can't download them zip or original.
rmngorelov said:
I restored to this stock ROM before and everything worked well. Currently I can't boot into recovery, Samsung flashes once and that's it, that's why I'm desperate the only thing I can do is boot in to download mode for odin.
Click to expand...
Click to collapse
Just hold home power and volume up. Right when you see text at the top left let go. You have to have the right timing
i7vSa7vi7y said:
Just hold home power and volume up. Right when you see text at the top left let go. You have to have the right timing
Click to expand...
Click to collapse
After almost eight hours of troubleshooting I finally got it to work.
I've tried flashing clockworkmod several times to see if I could get into recovery with no result so I gave up on that and I flashed the newest stock rom I could find L720VPUFNG2_L720SPTFNG2_SPR and it was still not booting. Than I thought maybe twerp would make a difference and god almighty it finally booted! I felt as if I gave birth to a child after eight hours of labor!
Now I'm extremely paranoid about touching anything because it took me forever to do this. Does anyone know why flashing twerp would make such a difference? I know this sort of stuff can get extremely complicated but I'd like to try to understand.
I hope my foolish agony contributed to this community if not in any other way except by the comedic relief caused by my ignorance.
rmngorelov said:
After almost eight hours of troubleshooting I finally got it to work.
I've tried flashing clockworkmod several times to see if I could get into recovery with no result so I gave up on that and I flashed the newest stock rom I could find L720VPUFNG2_L720SPTFNG2_SPR and it was still not booting. Than I thought maybe twerp would make a difference and god almighty it finally booted! I felt as if I gave birth to a child after eight hours of labor!
Now I'm extremely paranoid about touching anything because it took me forever to do this. Does anyone know why flashing twerp would make such a difference? I know this sort of stuff can get extremely complicated but I'd like to try to understand.
I hope my foolish agony contributed to this community if not in any other way except by the comedic relief caused by my ignorance.
Click to expand...
Click to collapse
Depends what recovery you had and what version. I personally like Philz touch recovery but TWRP is good. Now wipe and flash a ROM my friend or restore a backup
rmngorelov said:
After almost eight hours of troubleshooting I finally got it to work.
I've tried flashing clockworkmod several times to see if I could get into recovery with no result so I gave up on that and I flashed the newest stock rom I could find L720VPUFNG2_L720SPTFNG2_SPR and it was still not booting. Than I thought maybe twerp would make a difference and god almighty it finally booted! I felt as if I gave birth to a child after eight hours of labor!
Now I'm extremely paranoid about touching anything because it took me forever to do this. Does anyone know why flashing twerp would make such a difference? I know this sort of stuff can get extremely complicated but I'd like to try to understand.
I hope my foolish agony contributed to this community if not in any other way except by the comedic relief caused by my ignorance.
Click to expand...
Click to collapse
im having similar issues. which version of TWRP worked for you?
thank you
fearthemarchx said:
im having similar issues. which version of TWRP worked for you?
thank you
Click to expand...
Click to collapse
I recommend flashing the newest one here using odin
http://teamw.in/project/twrp2
Then once you are able to boot into recovery go to wipe and perform both factory reset and format data. Then install whatever rom you like, I used Sprint Galaxy S4 SPH-L720 VPUFNAE (Androdi 4.4.2) found here
http://galaxys4root.com/galaxy-s4-stock-firmware/ (or maybe find a newer stock rom if this one gives you errors)
Just copy the zip file to the phone, boot into twrp, do wipe factory reset again, select install then select the zip in whatever directory and you should be good to go. Make sure you do a back up in twrp once you get the phone to boot so you can always revert to stock.
I hope I was thorough enough that some of the information was useful. Let me know if you need any more help.
only certain recoveries will stick. ive tried the most recent twrp, with no luck. only a few versions of philztouch work.
Sent from my LGL34C using XDA Free mobile app
fearthemarchx said:
only certain recoveries will stick. ive tried the most recent twrp, with no luck. only a few versions of philztouch work.
Sent from my LGL34C using XDA Free mobile app
Click to expand...
Click to collapse
Format with philztouch that works then try flashing a new stock rom with odin. That should bring everything back to stock including the recovery.
ive tried. when i flash rom via odin i only get a blue "recovery booting" at the top of boot screen. even when i only power on, not into recovery. im going to attempt to flash rom provided in previous post via philz.
Sent from my LGL34C using XDA Free mobile app
fearthemarchx said:
ive tried. when i flash rom via odin i only get a blue "recovery booting" at the top of boot screen. even when i only power on, not into recovery. im going to attempt to flash rom provided in previous post via philz.
Sent from my LGL34C using XDA Free mobile app
Click to expand...
Click to collapse
You're in download mode when you flash from odin right? If you your getting an error flashing, try a different stock rom after reformating/resetting to factory (it's crucial to clear the cache before trying a different rom). I had to try a few roms before I found one that worked.

Categories

Resources