hey guys after some problems with gb cyanogen 10 by tezet i tried to flash stock rom retail italy 2.3.4, but when the flashing process in rsd lite ""say power up the phone manually" the phone is already stucked in moto logo, i try to press power button but nothing happens. if i press volume up+down it goes ahead in moto logo pulsing animation, but get stuck in that animation. i tried to go into exclamation mark menu by removing battery pressing x then insert battery still holding x and power on but nothing happens.
any solution?
any help plx?
guys im still in trouble, still unable to use my phone. i can access to bootloader 70.13, i tried to flash uk itaalian and de/at/ch 2.3.4 sbf but after flash phone get stucked in moto logo. and im not able to go into stock recovery by holding x while booting up the phone. what can i do?
During startup, does the led flash blue for a moment? If so, try to quickly press the volume down button while it is blue.
Sent from my Milestone 2 with tapatalk 4
diavolobianco said:
guys im still in trouble, still unable to use my phone. i can access to bootloader 70.13, i tried to flash uk itaalian and de/at/ch 2.3.4 sbf but after flash phone get stucked in moto logo. and im not able to go into stock recovery by holding x while booting up the phone. what can i do?
Click to expand...
Click to collapse
Push and hold x+power until menu appears. Then push volume up and down at the same time
divie said:
During startup, does the led flash blue for a moment? If so, try to quickly press the volume down button while it is blue.
Sent from my Milestone 2 with tapatalk 4
Click to expand...
Click to collapse
I saved mine once using this method after flashed a rom and stuck in moto logo
Related
ok so i flashed a rom onto my droid x and i wanted to go back to stock so i try flashing the 2.3.15 sbf and now im stuck in a boot loop and i would like to know were i went wrong. was it the sbf. plzz help!!! would like to have my phone back
donpatrio said:
ok so i flashed a rom onto my droid x and i wanted to go back to stock so i try flashing the 2.3.15 sbf and now im stuck in a boot loop and i would like to know were i went wrong. was it the sbf. plzz help!!! would like to have my phone back
Click to expand...
Click to collapse
You need to wipe data in the stock recovery. Pull your battery, put it back in and the phone should still be off. Hold down the home button (or maybe volume down+home, can't remember) while powering on the phone.
milan616 said:
You need to wipe data in the stock recovery. Pull your battery, put it back in and the phone should still be off. Hold down the home button (or maybe volume down+home, can't remember) while powering on the phone.
Click to expand...
Click to collapse
Hold down the home button and the pwr button.. It will then come to a yellow triangle and the android guy.. push the search button to continue to the android bootloader. From there wipe data/cache and reboot.
i flash my phone with a custom rom from this forum
succesfull until RSD Lite step
after RSD Lite, my phone stuck at Motorola logo with blur
tried pull off and pulling on the batery with power and volume up, it got back to bootloader screen
try aother RSD Power, it is still the same
Progress till 100 persen, but the phone stucked at motorola blur logo
any solution, guys?
thanks
What were you trying to flash?
I try to upgrade to froyo.
it stuck after RSD Lite step
Well first, is your phone rooted? Secondly, what stock version did you have?
I think I can get you up and running with Froyo
you may try to install your original version/build number sbf. if its work, maybe you can try flash froyo ROM again. then when you finished restore custom ROM all you have to do is go to bootloader then flash boot/devtree only sbf.. dont pull usb connection. but if RSD want you to turn phone manually then you need to press power button even though your phone at booting state..
i got the same problem, everything was working fine before i done it a couple times but then i used miui and my phone battery died and it wouldnt work after that so i decided to flash with rsd lite and after doing everything normally its just stuck at the motorola and moto blur symbol/animation thing. really frustrating.
-ashur
FL4M3K1NG said:
i got the same problem, everything was working fine before i done it a couple times but then i used miui and my phone battery died and it wouldnt work after that so i decided to flash with rsd lite and after doing everything normally its just stuck at the motorola and moto blur symbol/animation thing. really frustrating.
-ashur
Click to expand...
Click to collapse
did you find fix?
What SBF file did you use?
Have you tried another file?
get into stock recover (Vol Up + Power) then wipe data/cache
Half Bricked
I have an Mb525 rooted (that was) running stock 2.2 Blurred. I installed the Defy boot loader and hard reset/wiped partitions and (tried to) install cm7 from SD, it installs fine, goes fine, everything is all set. Reboot the device and the splash image pops up with the white LED first, then the blue one for boot loader, and finally the green one. It stays on splash screen. I tried 2 different versions of cm7 and both do the same thing. I'm able to access the boot loader, it just doesn't finish loading whatever I flash onto it.
As my phone is dysfunctional, I would appreciate it if you could contact me through my Skype;
kurtdunsmore
I won't receive emails.. =/
Specs:
Moto Defy shipped with 2.1
Rooted
Red Lense
T-Mobile, U.S.A.
Please let me know if any other information would be helpful.
tendyfish said:
get into stock recover (Vol Up + Power) then wipe data/cache
Click to expand...
Click to collapse
to go in stock recovery u must use Vol Down + Power
Solution
I had this problem. Found a solution at 4pda.ru
1. Shut down your phone.
2. Hold Volume- button, press Power button for 2 seconds. Then release both.
3. When you see Android robot press together both Volume+ and Volume- buttons.
4. Erase both Cache and Data.
5. Reboot.
Your phone should boot normally.
aed0101 said:
I had this problem. Found a solution at 4pda.ru
1. Shut down your phone.
2. Hold Volume- button, press Power button for 2 seconds. Then release both.
3. When you see Android robot press together both Volume+ and Volume- buttons.
4. Erase both Cache and Data.
5. Reboot.
Your phone should boot normally.
Click to expand...
Click to collapse
This worked perfectly well. Thank you.
Andy
I can't get the sbf boot screen, and hitting the search button if I boot from power and X doesn't work.
pbonello said:
I can't get the sbf boot screen, and hitting the search button if I boot from power and X doesn't work.
Click to expand...
Click to collapse
Pull the battery, plug the phone into the computer and it should automatically go into bootloader mode so you can sbf
Sent from my HTC Thunderbolt
ok so installed the stock froyo .sbf with rsd lite 5.0 and now it wont go past the att boot screen. please help. thank you
Press the down volume button while pressing the power button to turn on the phone. Once you see the Motorola symbol come up let go. You will see an exclamation point in a triangle and the android. Once you see that press the down volume button again. You are now in recovery. Do a wipe/factory reset. This should take care of your problem.
Sent from my MB525 using XDA App
when i get to the android and the triangle, when i press down it doesnt go into recovery
nevermind i got into revovery
My brother tried to SBF stock froyo rom over Liberty. When the battery went dead he brought the phone to me. Changed batteries and SBF to the stock froyo rom he used. Phone is caught in boot loop. Holding Home and powering on only brings up motorolla splash and proceeds to boot loop. I have tried flashing every SBF for this Verizon but it seems that the recovery was deleted when he tried to original install and the battery died. The roms SBF fine but start a boot loop. I have pulled the battery holding home+power but the droid will not go into the recovery. CWM also does not boot so I assume it was deleted when he did the first SBF. Wondering if there is a way to SBF the Recovery Partition since all I can get to is the bootloader. 30.04. Any suggestions?
Depending on the SBF you flashed, you should be able to hold home and power (from a completely powered off state) and get the android with the triangle.
From there you will have to either press search (Froyo) or both volume buttons (Gingerbread).
Sent from my Transformer TF101 using XDA App
infazzdar said:
Depending on the SBF you flashed, you should be able to hold home and power (from a completely powered off state) and get the android with the triangle.
From there you will have to either press search (Froyo) or both volume buttons (Gingerbread).
Sent from my Transformer TF101 using XDA App
Click to expand...
Click to collapse
That is the problem. Regardless of which SBF I flash Home+Power just hangs Moto Logo and eventually starts the boot loop. It's almost as if the Recovery is not longer accessible.
Continue to hold both buttons even when it is on the Motorola logo.
Also, try reSBFing with .602 in Linux. For a nice clean start.
Sent from my Transformer TF101 using XDA App
Holding the buttons from a powered down phone it sits on M logo for about 8 seconds then starts the boot loop. This is with me Holding both Power and Home, Holding power and home and releasing power at logo. The only key on command that seems to work is the Bootloader.
Ill DL the 602 and Nix-SBF it and report back. Thanks.
InsanityLivz said:
Holding the buttons from a powered down phone it sits on M logo for about 8 seconds then starts the boot loop. This is with me Holding both Power and Home, Holding power and home and releasing power at logo. The only key on command that seems to work is the Bootloader.
Ill DL the 602 and Nix-SBF it and report back. Thanks.
Click to expand...
Click to collapse
Try doing the FULL .340 SBF and then when that finishes do the SYSTEM ONLY SBF. See if that does anything
Tried 604, 340 and 340 system. I SBF'd all form linux starting with 602. Rebooted holding home and power and after a few seconds it went straight into boot loop again. Same with the .304 and .304 overwritten with system files. I flashed 304 then immediately flashed the 304 system only. Still same symptoms. I ask my brother and he said the phone and all the buttons were working when he tried restoring it to factory so broken Home key is not the answer. I am fairly sure if there were another way to push a Wipe/reset to the phone it would stop looping and boot into any flavor firmware. You would think it would be easy to run a wipe/reset command from bootloader. Any more suggestions because i'm about to give up on this beast.
From what I can tell, every possible recovery option has been exhausted.
Sent from my Transformer TF101 using XDA App
infazzdar said:
From what I can tell, every possible recovery option has been exhausted.
Sent from my Transformer TF101 using XDA App
Click to expand...
Click to collapse
So it is Officially Bricked. Oh well.
They're almost never bricked. Did you try SBFing from the bootloader?
Boot into bootloader mode by holding down Volume Down, the Camera & the Power buttons.