Ok, so i bought new L7 II yesterday - I have experience with Android phones, so this is nothing new. And I set up phone, just as I want, rooted it! And then, I thought that it would be nice to have CWM. Of course, I was lazy, so i just googled for tutorial. And I found up a site on portuguese ( which is not language that I know ), so I tried to install without translation...yes I know, stupid! So, downloaded everything, connected phone, and there was emmc.bat - runned it, phone restared and that was that. Now it just rebots...it starts with LG logo, holds up for 3-4 sec and again restart. I tried to get in emergency mode - Vol down + Power btn - no luck. One interesting thing happends: when I hold these buttons, or any other combination, LED buttons in bottom of phone, just blinks...
Please, help!
Dejan990 said:
Ok, so i bought new L7 II yesterday - I have experience with Android phones, so this is nothing new. And I set up phone, just as I want, rooted it! And then, I thought that it would be nice to have CWM. Of course, I was lazy, so i just googled for tutorial. And I found up a site on portuguese ( which is not language that I know ), so I tried to install without translation...yes I know, stupid! So, downloaded everything, connected phone, and there was emmc.bat - runned it, phone restared and that was that. Now it just rebots...it starts with LG logo, holds up for 3-4 sec and again restart. I tried to get in emergency mode - Vol down + Power btn - no luck. One interesting thing happends: when I hold these buttons, or any other combination, LED buttons in bottom of phone, just blinks...
Please, help!
Click to expand...
Click to collapse
Hello,
Try this:
* Press And Hold Volume Down Key + Hot Key + Then Power On Your Phone
* Hold Pressing Keys Untill The Lg Logo Appears
* When Lg Logo . Release Power Key
* Then Release Hot Key + Volume Down Key When The Lg Logo Disappears
* After 1 minute Your Phone Will Restarted. After Completing Hard Reset Process
* Done ! Enjoy
- See more at: http://www.easyreset.in/2013/06/hard-reset-lg-optimus-l7-ii-dual-p715.html#sthash.AwMi4cB6.dpuf
I just tried as you wrote: Vol Down + Power key + Hot key ( I was not sure which Hot key did you think, since LED Button was circled on image that you linked; I tried both central button and LED button ) and no luck;
after LG logo dissapears, i release buttons and phone just continues with reboot sequence.
Dejan990 said:
I just tried as you wrote: Vol Down + Power key + Hot key ( I was not sure which Hot key did you think, since LED Button was circled on image that you linked; I tried both central button and LED button ) and no luck;
after LG logo dissapears, i release buttons and phone just continues with reboot sequence.
Click to expand...
Click to collapse
I've managed to reset my L7 P700 but since i don't have L7 II i can't help you.My advice is to try again with more atention the combination of butons.
Cheers.
Try vol.up + hot key + power... It worked on my p700 in same situation.
Sent from my LG-P700 using xda app-developers app
Somehow I managed to enter emergency mode, with combination: usb kable, vol down, pwr button. Now I'm waiting for firmware to download, and soon (I hope) I'll be posting form my LG.
Success. Problem solved. Auto-update from LG Tool fixed everything while phone was in emergency mode.
Related
Hi,
one day, I changed the permission of /system/font by accident:
e.g. I changed:
.............read....write.....execute
user.........V........V...........V
group.......V.....................V
others......V.....................V
to
............read.......write......execute
user........V..........V..............
group.......V.........................
others......V.........................
After that, I can't turn on my phone anymore T.T
When I press the power button, the LG logo appears, and then vibrate, logo disappear, after a few seconds the logo comes back and that's it!
It just stays there (I waited for 2 hours and it didn't change,so I turned it off)
Please help~
How can i fix it...
leelulu4fb said:
Hi,
one day, I changed the permission of /system/font by accident:
e.g. I changed:
.............read....write.....execute
user.........V........V...........V
group.......V.....................V
others......V.....................V
to
............read.......write......execute
user........V..........V..............
group.......V.........................
others......V.........................
After that, I can't turn on my phone anymore T.T
When I press the power button, the LG logo appears, and then vibrate, logo disappear, after a few seconds the logo comes back and that's it!
It just stays there (I waited for 2 hours and it didn't change,so I turned it off)
Please help~
How can i fix it...
Click to expand...
Click to collapse
Enter download mode, and flash your firmware like this: http://forum.xda-developers.com/showthread.php?t=2409308 or just open LG Mobile Support Tool and select "Recover Phone". It does the same thing but it's easier.
Nothing's lost, you'll get it fixed.
mircea89fzr said:
Enter download mode, and flash your firmware like this: http://forum.xda-developers.com/showthread.php?t=2409308 or just open LG Mobile Support Tool and select "Recover Phone". It does the same thing but it's easier.
Nothing's lost, you'll get it fixed.
Click to expand...
Click to collapse
hi, thanks a lot.
but what is "version"? There are version 10C/10E/20A in http://lg-phone-firmware.com/index.php?mod=Lg+Optimus+L7&paese=RGS/ROGERS&id_mod=13 ...
How can I know which one is the right one?
leelulu4fb said:
hi, thanks a lot.
but what is "version"? There are version 10C/10E/20A in http://lg-phone-firmware.com/index.php?mod=Lg+Optimus+L7&paese=RGS/ROGERS&id_mod=13 ...
How can I know which one is the right one?
Click to expand...
Click to collapse
My guess is 20A is ICS, 10C is the first release of Gingerbread, and 10E whatever update they did to it. If you're not sure, go with the LG Mob Supp Tool, it's safer and easier.
mircea89fzr said:
Enter download mode, and flash your firmware like this: http://forum.xda-developers.com/showthread.php?t=2409308 or just open LG Mobile Support Tool and select "Recover Phone". It does the same thing but it's easier.
Nothing's lost, you'll get it fixed.
Click to expand...
Click to collapse
one more problem, I can't access to download mode, I press vol+ & power, but nothing happen
leelulu4fb said:
one more problem, I can't access to download mode, I press vol+ & power, but nothing happen
Click to expand...
Click to collapse
Did it work before with the exact firmware update you had? Remove the battery of your phone and re-insert it (don’t turn it on). Press and hold Volume Up button and Volume Down button. While you are pressing the two buttons, press the Power button or insert USB cable (try both if it doesn't work). Or try with: phone off, volume down + insert cable. I don't know the exact combination for your phone.
leelulu4fb said:
one more problem, I can't access to download mode, I press vol+ & power, but nothing happen
Click to expand...
Click to collapse
try vol down+power
when keys light up, touch menu key (vibrates)
Even if you can't go to download mode you'll still be able to use kdz on it. just plug it in and start it. And btw, be careful next time. My Optimus L7 got hard bricked and I needed to go to LG for them to fix it.
guys, please help. i have an LG d802 and came from an AOSP custom rom (mahdi) . i followed the instuctions and everything went well on the flashing side.
21:43:12 : Step : S/W Upgrade Complete!
21:43:12 : Check Froyo to ICS upgrade phone model....
thats the last line on the support tool.
after, im stuck at bootloop. so i tried to factory reset my phone by holding power button + volume down key. my prob is the factory reset ui wont appear. and when i hold it long enough it would just turn off......its always stuck at bootloop. please help
thank you soo much
and i have seam problem
http://forum.xda-developers.com/showthread.php?t=2779779
dranoel12 said:
guys, please help. i have an LG d802 and came from an AOSP custom rom (mahdi) . i followed the instuctions and everything went well on the flashing side.
21:43:12 : Step : S/W Upgrade Complete!
21:43:12 : Check Froyo to ICS upgrade phone model....
thats the last line on the support tool.
after, im stuck at bootloop. so i tried to factory reset my phone by holding power button + volume down key. my prob is the factory reset ui wont appear. and when i hold it long enough it would just turn off......its always stuck at bootloop. please help
thank you soo much
Click to expand...
Click to collapse
there are 2 ways
1st
-hold volume down + power until LG logo appears - shortly release and then press and hold again volume down + power, then confirm the steps.
2nd
-hold volume down + power until LG logo appears - shortly release and then press and hold again volume down + volume up, then confirm the steps. I hope this helps
bender_007 said:
there are 2 ways
1st
-hold volume down + power until LG logo appears - shortly release and then press and hold again volume down + power, then confirm the steps.
2nd
-hold volume down + power until LG logo appears - shortly release and then press and hold again volume down + volume up, then confirm the steps. I hope this helps
Click to expand...
Click to collapse
youre sating i have to press the 3 buttons on the 2nd step when the lg logo appears? appreciate your help
2 buttons. It's either voldown and volup or voldown and power
Sent from my LG-D802 using Tapatalk
bender_007 said:
2 buttons. It's either voldown and volup or voldown and power
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
thanks, this helped me. THANK YOU
LG G2 D802 Three (H3G) KK 4.4.2
Hi all, I've checked out this forum and also watched a few videos. I've tried the volume down + power until the LG logo appears and then release and re-press them but all that happens is that the phone powers off after the second press after about 10 seconds. The volumes buttons work fine. There's clearly a trick to this but after about 20 attempts, it has be beaten! Any clues to the magic sequence needed?
TIA
EDIT: Yes, I can get into download mode no problem.
when the lg logo appears try releasing power and volume down and then pressing volume up instead
meangreenie said:
when the lg logo appears try releasing power and volume down and then pressing volume up instead
Click to expand...
Click to collapse
Thanks for the reply.
If I just use volume up after the LG logo, the phone reboots normally. If I do a power + volume up after the LG logo, it just powers off after 10 seconds.
In fact every test shows the phone to behave exactly as if the volume up and down buttons have been disabled during boot up.
Tried a few times again - no recovery. Maybe it's something that has been blocked in the stock KK OTA update?
mossywell said:
Thanks for the reply.
If I just use volume up after the LG logo, the phone reboots normally. If I do a power + volume up after the LG logo, it just powers off after 10 seconds.
In fact every test shows the phone to behave exactly as if the volume up and down buttons have been disabled during boot up.
Click to expand...
Click to collapse
I think what he meant is when phone powered off, press volume down+power and when you see lg logo press volume up+down don't touch power
Sent from my potato powered LG G3 D800
Update: I can get into recovery using adb. Maybe H3G have disabled getting into recovery via the hardware buttons only leaving download mode available. Bit of an odd thing to do though.
XxZombiePikachu said:
I think what he meant is when phone powered off, press volume down+power and when you see lg logo press volume up+down don't touch power
Sent from my potato powered LG G3 D800
Click to expand...
Click to collapse
D'oh! That was about the only combo that I didn't try. Yes - it works. Many thanks to both for the help. Just curious: this alternative key combo I didn't find anywhere; is it something some carriers have done to their phone? (Or did I just not search hard enough? )
mossywell said:
D'oh! That was about the only combo that I didn't try. Yes - it works. Many thanks to both for the help. Just curious: this alternative key combo I didn't find anywhere; is it something some carriers have done to their phone? (Or did I just not search hard enough? )
Click to expand...
Click to collapse
lg changed the combination when they started releasing the knock code update, I have no idea why but now it just means some people need to use volume down+power while others have to use volume up+down it just creates more trouble for us(people who help others) because if people don't mention whether they have knock code update or not we just have to guess what update they are on
Hey guys.. Yesterday i downloaded autorec and installed TWRP.. Today i wanted to install a custom rom.. so i read some posts and i thought that i should wipe Everything.. So i wiped even my internal storage where i had my rom .img.. then i searched on the internet and i read to shut down my phone and reboot to recovery mode.. When i did that my phone stuck in bootloop and when i try to power it down it turns itself back on.. I cant enter recovery and download mode.. PLEASE HELP FAST.. my phone is LG G2 D802
Past98 said:
Hey guys.. Yesterday i downloaded autorec and installed TWRP.. Today i wanted to install a custom rom.. so i read some posts and i thought that i should wipe Everything.. So i wiped even my internal storage where i had my rom .img.. then i searched on the internet and i read to shut down my phone and reboot to recovery mode.. When i did that my phone stuck in bootloop and when i try to power it down it turns itself back on.. I cant enter recovery and download mode.. PLEASE HELP FAST.. my phone is LG G2 D802
Click to expand...
Click to collapse
first of all - never, but never delete/wipe your internal storage...
second - and i've wrote this many times already:
to turn the device completely off
- your usb cable must be disconnected
- have the device charged for more than 50%
- press pwr button for more than 10 seconds
- at some point, LG logo will show - DO NOT LET THE PWR BUTTON OFF - KEEP IT PRESSED
- only then the device will be powered off completely with the black screen
THANK YOU!! you are awesome.. I misunderstood and i thought that i should wipe everything.. What do it do now?
Past98 said:
THANK YOU!! you are awesome.. I misunderstood and i thought that i should wipe everything.. What do it do now?
Click to expand...
Click to collapse
now you find the thread on how to transfer a rom to a device directly from twrp or adb... or how to flash KDZ stock (then reroot and go from scratch)
i've never done it because i've never messed up anything on my device (my luck) - so i don't know in details - but there are threads on this subjects...
btw one more thing i've noticed in your 1st post - you had an .img rom file
you can't flash .img in twrp - you'll need the rom .zip file...
how do i access TWRP?
search on which button combination to press to enter twrp... (but before you try the key combinations - have the device powered off completely as described above)
on my device and 20h bootloader its
- press and hold pwr button + volume down
- lg logo shows (let the buttons go for a second or less)
- quickly press and hold pwr button + volume up
that works on my device...
you probably have older bootloader (20a) so you can try
- press and hold pwr button + volume down
- lg logo shows (let the buttons go for a second or less)
- quickly press and hold pwr button + volume down again
now - if you have TWRP installed - it will show you a white screen (factory reset) with yes/or no buttons - just answer YES to all and it will boot to TWRP (you answer with volume up/down keys for selection and pwr button to confirm)
if nothing of that works - try searching for other key combos... but afaik those are the only two that exist - depending on bootloader...
I tried to update my LG G2 D802 from CM12.1 to 13 using the following steps:
1. reboot into twrp (2.8.7.3)
2. full wipe (all but internal storage)
3. installed bootstack-d802-CAF-signed.zip
4. installed CM13
5. reboot system
so far it worked fine, so I went back into recovery mode, installed the open_gapps-arm-6.0-stock-20151203.zip. After reboot, the phone keep throwing error messages "google service is closed" and keep repeating. I thought it may be an error in the gapps so I went into recovery again and tried to install another gapp version. I did a full-wipe again, but then I accidently did a system reboot. Now the phone is stuck after showing the LG logo and won't start properly. I try to go back into recovery mode:
1. turn off the phone
2. press power + volume down until the logo shows
3. release and repress the both button, which should bring me into recovery mode, but it didnt work. tried it numerous times, but always the same, if I release and press the both button after LG logo, the phone would just restart after few seconds...
can someone help me? Since the phone doesn't start, I can't install anything. Is there another way to get into recovery mode? Or can someone explain to me what I broke?
Don't press and release the volume down and power button at the lg logo. Just hold it until it goes into recovery.
If you can't get in, try to TOT back to stock. I would recommend you stick with rooted stock before you hard brick it(if you haven't done so already). Not only is cm buggy ass hell on the g2 but MM will be even more so since it's so new. Good luck.
stan54 said:
Don't press and release the volume down and power button at the lg logo. Just hold it until it goes into recovery.
Click to expand...
Click to collapse
I tried, it seems the phone will just keep restarting(logo keep disappering and reappering again)
stan54 said:
If you can't get in, try to TOT back to stock. I would recommend you stick with rooted stock before you hard brick it(if you haven't done so already). Not only is cm buggy ass hell on the g2 but MM will be even more so since it's so new. Good luck.
Click to expand...
Click to collapse
what is "TOT"? How do I do that when I can't start the phone and can't get into recovery mode?
Follow this guide to go back to stock:
http://forum.xda-developers.com/showthread.php?t=2432476
With CAF bootstack by Daniel Stuart is new buttons combination to boot into recovery:
1. turn off phone
2. Power + Volume down
3. when LG logo appears, release both buttons and press Volume up + Volume down
brrrrm said:
With CAF bootstack by Daniel Stuart is new buttons combination to boot into recovery:
1. turn off phone
2. Power + Volume down
3. when LG logo appears, release both buttons and press Volume up + Volume down
Click to expand...
Click to collapse
+1 to this method, i have been using this when I was not able to get into recovery easily. My issue is unrealted to yours though.
I had a similar issue trying to enter Recovery on my phone. I've tried a lot both methods, so I turned off the device, waited something like 5 minutes, then tried the vol up + vol down method and it worked. I don't know why, but that's not the first time I have to wait a bit longer to try the key combination in order to enter Recovery. Just in case you can't turn off you phone completly, hold power button till phone turns off, keep holding it, wait for the LG logo to show up, when the screen goes off, release the button. Good luck
brrrrm said:
With CAF bootstack by Daniel Stuart is new buttons combination to boot into recovery:
1. turn off phone
2. Power + Volume down
3. when LG logo appears, release both buttons and press Volume up + Volume down
Click to expand...
Click to collapse
thank you, you life saver
brrrrm said:
With CAF bootstack by Daniel Stuart is new buttons combination to boot into recovery:
1. turn off phone
2. Power + Volume down
3. when LG logo appears, release both buttons and press Volume up + Volume down
It's not working for me. I got excited for a minute since others had luck with it, but it was a no-go for me. I know this is an older thread but....
It seems like being rooted, having TWRP and CM13 and Flashify, between all those, something should freakin' work, besides goofy hardware button combos. :crying:
Click to expand...
Click to collapse