SuperSU on Android 4.3 - Nexus 7 (2013) General

Since last Android 4.3 version, it's not possible to update SuperSU directly from the application. We need to do it through CWM or TWRP.
But it does not change the fact that Chainfire does a great job with that app!

actionmystique said:
Since last Android 4.3 version, it nor possible to update SuperSU directly from the application. We need to do it through CWM or TWRP.
But it does not change the fact that Chainfire is doing a great job!
Click to expand...
Click to collapse
yeah. just open play store and update. or you can flash the latest zip via twrp of cwm...

I also ran into a problem updating, but it was the update that is within supersu apk to update the binary that wouldn't work for me, I had to flash the update in recovery

Related

[q] to install update on rom omni 4.4.2 n7100

Hello,
Anyone could help me with this problem:-
I have already rooted my Note 2 N7100 with Omni 4.4.2 Nightly but somehow, on software update, with an update available after checking it, I was unable to flash it successfully. There was an error. I have checked SuperSU as to install SuperSu backup script as I believe it would help me to do update on the current build but I could not do that as it requires installing SuperSu into/system (converting into a system app) first but when I have tried to install and later rebooted my device, it was still the same. On Custom Rom, I could not install supersu backup script and when trying to flash update (after checking it and update is available, it was again not successful.
Any advice?
Salam Husin said:
Hello,
Anyone could help me with this problem:-
I have already rooted my Note 2 N7100 with Omni 4.4.2 Nightly but somehow, on software update, with an update available after checking it, I was unable to flash it successfully. There was an error. I have checked SuperSU as to install SuperSu backup script as I believe it would help me to do update on the current build but I could not do that as it requires installing SuperSu into/system (converting into a system app) first but when I have tried to install and later rebooted my device, it was still the same. On Custom Rom, I could not install supersu backup script and when trying to flash update (after checking it and update is available, it was again not successful.
Any advice?
Click to expand...
Click to collapse
Flash SuperSU in recovery and then you should be able to install the backup script.

[Q] SuperSU gives me an error - "There is no binary installed" (Android 5.0)

[Q] SuperSU gives me an error - "There is no binary installed" (Android 5.0)
I have just updated my nexus 4 to Andorid L 5.0 and I rooted the device using CF-Autoroot.
I have the SuperSu app but I dont have access to root and when I open it, it says :
"There is no SU binary installed, and SuperSU cannot install it. This is a problem!
If you just upgraded to Android 5.0, you need to manually re-root - consult the relevant forums for your device."
I am quite tired of unlocking my bootloader over and over again.
Is there a flashable zip that can fix this problem ?
Thank you!
LegitCarry said:
I have just updated my nexus 4 to Andorid L 5.0 and I rooted the device using CF-Autoroot.
I have the SuperSu app but I dont have access to root and when I open it, it says :
"There is no SU binary installed, and SuperSU cannot install it. This is a problem!
If you just upgraded to Android 5.0, you need to manually re-root - consult the relevant forums for your device."
I am quite tired of unlocking my bootloader over and over again.
Is there a flashable zip that can fix this problem ?
Thank you!
Click to expand...
Click to collapse
Download Supersu beta 2.27 zip from http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
But you need to have a custom recovery like CWM or TWRP to flash it.
venu123 said:
Download Supersu beta 2.27 zip from http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
But you need to have a custom recovery like CWM or TWRP to flash it.
Click to expand...
Click to collapse
Hey thanks for the comment. I flashed it and im stuck now on bootloop
Okay I gave up. I will just flash factory image again and ill leave the bootloader unlocked.
Waiting for the stable version.
LegitCarry said:
Okay I gave up. I will just flash factory image again and ill leave the bootloader unlocked.
Waiting for the stable version.
Click to expand...
Click to collapse
you need to flash .img file of modified kernel from chainfire. and yr .zip of supersu will work
SuperSU 2.2.7 will work but CF-Autoroot flashes a modified kernel so you need to flash a stock kernel first then install SuperSU from TWRP. You can leave you bootloader unlocked.

Easy root your Edge and other phones with Stock Kernel (no need to use a custom one)

Chainfire has developed a new SuperSu Update zip, Version 2.60 and newer 2.61.
with using this update zip, you will not need a custom kernel for getting root in future, works fine on F, FY Model on Android 5.1.1 (tested).
many, many THX to one of best worldwide developer!
This method will work on many othere phones, please read threads for more infos!
First read here: http://forum.xda-developers.com/app...ersu-v2-05-t2868133/post64161544#post64161544
then download latest SuperSu Update zip here: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Changelog here: http://forum.xda-developers.com/showpost.php?p=23427824&postcount=3
very easy to use:
Install Stock Samsung based FW with stock bootloader etc...
Install latest TWRP
Use TWRP to install latest SuperSU Zip
Attention: If TWRP tells you SuperSU is not installed, and asks you to install it, do not do it, you will break things!
many thanks to developers!!!!!! Great new thing!!!!
Petteri said:
Chainfire has developed a new SuperSu Update zip, Version 2.60 and newer 2.61.
with using this update zip, you will not need a custom kernel for getting root in future, works fine on F, FY Model on Android 5.1.1 (tested).
many, many THX to one of best worldwide developer!
This method will work on many othere phones, please read threads for more infos!
First read here: http://forum.xda-developers.com/app...ersu-v2-05-t2868133/post64161544#post64161544
then download latest SuperSu Update zip here: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Changelog here: http://forum.xda-developers.com/showpost.php?p=23427824&postcount=3
very easy to use:
Install Stock Samsung based FW with stock bootloader etc...
Install latest TWRP
Use TWRP to install latest SuperSU Zip
Attention: If TWRP tells you SuperSU is not installed, and asks you to install it, do not do it, you will break things!
many thanks to developers!!!!!! Great new thing!!!!
Click to expand...
Click to collapse
so can i install xposed without flashing kernel?
Does this work with N915A?
Aggiefury101 said:
Does this work with N915A?
Click to expand...
Click to collapse
Please let me know if you are able to root it. I am wondering if other universal rooting methods work with this phone.
Everything worked fine, you don`t need wondering...it`s Chainfire who developes here! Schould work on all phones (inkluding A VErsion) from Android Lolliopop and higher!
mtayabkk said:
so can i install xposed without flashing kernel?
Click to expand...
Click to collapse
You could of already done that. I flashed xposed and it worked without root. Just flash in custom recovery
Darth-Kadd said:
You could of already done that. I flashed xposed and it worked without root. Just flash in custom recovery
Click to expand...
Click to collapse
without ROOT ? how
No issues with latest stock firmware on 915G. Thanks. ?
mtayabkk said:
without ROOT ? how
Click to expand...
Click to collapse
Trust me, I've done it without root. I had xposed installed before with root then I flashed the latest stock rom from n915w8 and flashed xposed right after without wiping data and it worked. I guess it was because the xposed modules were already configured but ultimately, I did not root in order to use xposed. The functionality of xposed is increased if you root. This is from my experience
The latest xposed for Samsung probably has some loop hole I'm unaware of that allows you to install it without root.
Petteri said:
Everything worked fine, you don`t need wondering...it`s Chainfire who developes here! Schould work on all phones (inkluding A VErsion) from Android Lolliopop and higher!
Click to expand...
Click to collapse
the boot-loader is not unlocked for n915a currently, how can we install twrp? or you mean install supersu by odin without twrp?
step 2... Install latest twrp... How can you do that if your phone has never been rooted before?
for my note edge sprint (915p) i used CWM cos twrp didnt work. after flashing supersu said i dont have root access and if i would like to have it. I SELECTED NO. after rebooting once phone booted fine. took a while for supersu to take over things and now its all good
Petteri said:
Chainfire has developed a new SuperSu Update zip, Version 2.60 and newer 2.61.
with using this update zip, you will not need a custom kernel for getting root in future, works fine on F, FY Model on Android 5.1.1 (tested).
many, many THX to one of best worldwide developer!
This method will work on many othere phones, please read threads for more infos!
First read here: http://forum.xda-developers.com/app...ersu-v2-05-t2868133/post64161544#post64161544
then download latest SuperSu Update zip here: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Changelog here: http://forum.xda-developers.com/showpost.php?p=23427824&postcount=3
very easy to use:
Install Stock Samsung based FW with stock bootloader etc...
Install latest TWRP
Use TWRP to install latest SuperSU Zip
Attention: If TWRP tells you SuperSU is not installed, and asks you to install it, do not do it, you will break things!
many thanks to developers!!!!!! Great new thing!!!!
Click to expand...
Click to collapse
Do you by any chance have the latest twrp (2.8.0.7) in .tar file? I've been lurking around for a while now and I'm not able to find it. I can only find .img and I need Linux to convert it to .tar to be able to Odin. I've lost root and now I can't get it back.
Osaab said:
for my note edge sprint (915p) i used CWM cos twrp didnt work. after flashing supersu said i dont have root access and if i would like to have it. I SELECTED NO. after rebooting once phone booted fine. took a while for supersu to take over things and now its all good
Click to expand...
Click to collapse
ok now that ive spent more time with it i believe the root i got is incomplete. on many apps supersu dialogue doesnt pop and they dont recognize the phone as rooted. i used titanium backup to try and remove system apps and despite everything going fine the apps didnt go anywhere
UPDATE: problem fixed. I edited the build.prop in /system/ using a build.prop editor and now all my apps are asking for root
In build.prop look for ro.securestorage.support=True and set it to False
Also solves if your phone keeps forgetting the wifi passwords
It works. SM-915F. Just don't forget to off 'reactivation lock' in security tab in androud in order to install TWRP successfuly. Thanks a lot!
No you're right. Twrp is in img format but you can easily convert it to tar using a linux emulator. Took me minutes to convert it to tar. Google "how to convert img to tar. Running twrp fine
Does it work in 915V ??
So,it's strange how the method works on my 915f. For example; Titanium Backup can't remove systems apps. It looks like I have a root, but not fully operated. Any advices?
Does this still trip the knox counter?
I want to root, but I must keep my warranty as this N915F is on my company's name.
benna said:
Does this still trip the knox counter?
Click to expand...
Click to collapse
Yes. Knox tiked(((

Stuck at supersu binary

Hi everyone,
I tried to root my G2 on KK with IOroot. After flashing supersu didn't work. It asks to update supersu binary and when i try to udate binary, it fails. I have also tried updating binary after updating supersu app from playstore but same happened. Now i can't remove supersu from phone as it is a system app now. How can i root my phone properly at this stage?
Kindly help
ali.akbar01 said:
Hi everyone,
I tried to root my G2 on KK with IOroot. After flashing supersu didn't work. It asks to update supersu binary and when i try to udate binary, it fails. I have also tried updating binary after updating supersu app from playstore but same happened. Now i can't remove supersu from phone as it is a system app now. How can i root my phone properly at this stage?
Kindly help
Click to expand...
Click to collapse
Try flash newest beta from SuperSU zip or try new better Magisk and after flash not forget to bump with blastagators bumpscript
Zero_Rik said:
Try flash newest beta from SuperSU zip or try new better Magisk and after flash not forget to bump with blastagators bumpscript
Click to expand...
Click to collapse
I don't have any custom recovery installed on my phone, i can't flash what u mentioned. Kingroot also fails

Will OTA updates by LG still work with TRWP and Magisk/SU installed?

Dear all,
my question is: will OTA updates by LG still work if a have an BL unlocked, TRWP installed and Magisk installed?
I would like to keep my stock ROM and get the OTA, but I would like to make backups and be able to install software with needs root.
Can you recommend SU or Magisk?
Thanks.
you can recieve OTA but you can't install it , You need a zip update file and flash it with twrp
i use SU i never tested magisk
paabel said:
Dear all,
my question is: will OTA updates by LG still work if a have an BL unlocked, TRWP installed and Magisk installed?
I would like to keep my stock ROM and get the OTA, but I would like to make backups and be able to install software with needs root.
Can you recommend SU or Magisk?
Thanks.
Click to expand...
Click to collapse
With TWRP you cannot install OTA, so in any case you would need to remove it.
Also i don't advise to make OTA on a rooted device, doesn't matter if it's Magisk or SuperSU

Categories

Resources