Database Users

Help zte blade S7 t920 firmware needed

Can anyone please provide me link for ZTE blade S7 t920 firmware download please? My phone got bootloop, factory reset from stock recovery doesn't help phone still unable to boot to homescreen. Been looking all over the Internet but no luck finding the firmware for ZTE blade S7 t920! Been contacted the customer service on Twitter FB page and emails from zte website but they ignore me not giving me reply from like 3 days ago! I feel like being ignored as a customer!
Sent from my 6042D using Tapatalk

Please anybody help, I don't know who else I should ask for help

I do not know whether or not this helps you in any way, since the original post has been made quite some time ago, but it may be worth a try...
This phone was sold in a few countries, and one of them I know about was Thailand. If you look up the corresponding official ZTE support page, you get this:
http://www.ztedevice.com/support/detail?id=CB70AA9C4A8C4F87AB43C34D3608D11E
The direct link to the download is:
http://download.ztedevice.com/support/product/507/6404/sd/20160726173958917.zip
(This phone was also sold in Russia, but the official product page has been removed, and I see nothing on their support page about that.)
EDIT: Browsing some more I also found these:
http://www.ztedevice.com/support/detail?id=220768DC76A54A3DA35058798581D35D
(http://download.ztedevice.com/support/product/502/201607261748731/sd/20160726175804201.zip)
http://www.ztedevice.com/support/detail?id=42960D5BCACB415ABC48079330E92530
(http://download.ztedevice.com/support/product/505/201607121001133/sd/20160712100920696.zip)
http://www.ztedevice.com/support/detail?id=11BDFB5787D145F39F40D7D303539A56
(http://download.ztedevice.com/support/product/599/201609301500128/sd/20160930150633562.zip)
http://www.ztedevice.com/support/detail?id=21C3175244A94B05A966364EE7163FE3
(http://download.ztedevice.com/support/product/508/201612081035893/sd/20161208105528911.zip)
http://www.ztedevice.com/support/detail?id=1EF6B0B3FD624F79AD5668AB53F20D2B
(http://download.ztedevice.com/support/product/509/201607261720789/sd/20160726172926681.zip)
They might not be full ROMs, but should they really help, it would be recommended to directly host them somewhere else too, in case they are removed.
ZTE ROMs are a hard task to hunt down, if this does not help I strongly recommend to dig deeper down into their support page...

Dear Member,
i too faced problem in LYF LS-5021 looks same ZTE S7-T920. i found incomplete rom from internet, which failed in flash & came to dead. Later i found update.zip for LYF in that i found that is same as S7.
I edited rawprogram.xml to file given to download & flashed. After flash phone came alive & updated with update.zip.
Now phone came to normal.
May be it will help for u.... attached updater script of Lyf LS-5021.

Inside the zip's from the ZTE -homepage u gonna find the update.zip file .... which perfectly works for the S7.
So ... is the LYF LS-5021 exactly the same phone as the S7 ... any differences?
New ROMs available?

I would also like to know if there are any updates available for the Blade S7 (other than Lolipop 5.1). I managed to download the update.zip from the ztedevice . com website and followed the instruction and was able to update using the Blade S7 ROM but only Lolipop 5.1 is available. Can anyone confirm if LYF LS-5021 ROM can be used on the S7 and what ROM's are available?

kappwj said:
I would also like to know if there are any updates available for the Blade S7 (other than Lolipop 5.1). I managed to download the update.zip from the ztedevice . com website and followed the instruction and was able to update using the Blade S7 ROM but only Lolipop 5.1 is available. Can anyone confirm if LYF LS-5021 ROM can be used on the S7 and what ROM's are available?
Click to expand...
Click to collapse
The real question is if there is anything official above 5.1 available for the Lyf. Needrom seems to host official 6.0, but it would be nice to confirm that with Lyf support. IDK if they would answer, but you might as well should try your luck with the ZTE ROM compatibility (tough they most likely will not take any responsibility and not advise you to try flashing their ROM). Their support page is here:
https://www.mylyf.com/self-help.html
Also Lyf LS-5021 may be the Lyf Earth?

ЯazoR said:
The real question is if there is anything official above 5.1 available for the Lyf. Needrom seems to host official 6.0, but it would be nice to confirm that with Lyf support. IDK if they would answer, but you might as well should try your luck with the ZTE ROM compatibility (tough they most likely will not take any responsibility and not advise you to try flashing their ROM). Their support page is here:
Also Lyf LS-5021 may be the Lyf Earth?
Click to expand...
Click to collapse
It is the Lyf Earth 2 (or second gen earth). Just checked Needrom and cannot find any rom for Blade S7 . I will check Needrom for official Lyf 6.0. But thanks for the feedback.

ZTE blade S7 T920
I also have a ZTE blade S7 and I know the suffer of finding this phone's firmware... But I am still a Standard android customizer so yeah after searching the web... No firmware found for this phone... So here's what I've done to make a backup..
I rooted my phone using kingoroot via PC
-steps-
-download the kingoroot application on pc
-install the application on pc.
#on the phone#
- battery charged to 100% because of fear the process will fail because of the battery
-enabled unknown sources in
*settings/security/unknown sources*
-enabled developer options
*settings/about phone/Build number(just keep spamming the build number till it says developer mode enabled)
- go back to settings and enable usb debuging
*settings/developer options/usb debuging(tick the box)
-then connect phone to pc then a small box will show up on the phone
tick allow this pc bla~ bla~ and
press ok or accept
#on the pc#
-open kingoroot application
-wait for the application to load
-then press root device
-if the phone shows something that needs to install ,just press install
-Then the phone will automatically change to a blue screen with percentage numbers on screen.
Wait for 10-20 min
-Then on the phone will show up root success with a giant blue tick
-uninstall all the cleaner or battery saver that is installed by kingoroot...
-then reboot phone...
Now find TWRP recovery from xda somewhere for the zte blade s7
The thread
https://www.google.com/amp/s/forum....eneral/zte-s7-blade-recovery-cm-t3567806/amp/
Direct download link
https://drive.google.com/drive/mobile/folders/0B4Ya5mT9NhjqUUZyVTFDT18xQlU
-Download the above file on the phone
- after the download, there will be a file called recovery.img
- open flashify and slide to backup/restore
-backup the current recovery
-after backup slide back to Flash and pick Recovery Image
-pick choose a file and find the recovery.img that we downloaded earlier
And flash
-After flashing is done press flash more and it will leave you on the flash menu...
-press the three dot on the top right or left side (mine is right side)
-choose reboot recovery...
And now twrp will show up...
On first boot to twrp it will ask for allowing to modify the system...
Just swipe the blue circle
And now choose backup
For me, I check all the box to backup everything but the nesesary one is just boot and system...
And wallaahh backup done...
For my recommendation ,backup the file to a memory card and put it in a safe place just for safety.. Because you wont know maybe you'll accidentally deleted the file while formatting...
And that's it... Well done...

Anyone can help?
I need custom rom for zte blade s7

Is there any flashable msm8939.mbn/hex and msimage_8939.mbn for this phone? or any other unbrick method for ZTE Blade S7? I'm searching the net inside out and cant find a thing. Somebody please point in the right direction
I would really appreciate it to the max

We hit a dead end with this phone

I have a way but u need brains to do the following...
-To flash a custom recovery to the phone via sp flash tool or adb
The reason is because I have a backup rom of my zte t920 but it needs a custom recovery to reflash

Jo_bell said:
I have a way but u need brains to do the following...
-To flash a custom recovery to the phone via sp flash tool or adb
The reason is because I have a backup rom of my zte t920 but it needs a custom recovery to reflash
Click to expand...
Click to collapse
Anything is doable at this point. So tell me how am I going to flash a custom recovery? I do have the SP flash tool, so what else do I need?
Can you hook me up with your backup rom? I would really appreciate it

terawyvenx said:
Anything is doable at this point. So tell me how am I going to flash a custom recovery? I do have the SP flash tool, so what else do I need?
Can you hook me up with your backup rom? I would really appreciate it
Click to expand...
Click to collapse
Ok I will upload my backup rom to google drive and link will be sent on completion
I dont think sp flash tool can help on this... Becuase it needs the actual firmware scatter loading file... Which in this case... I dont have... :crying: still finding a way to create the scatter file myself.. No luck..
So.. Adb should be the hero here... But only if u hv usb debuging enabled before
Using a pc or laptop install adb to your pc/laptop from anywhere in xda...
The fastest and easiest is on this thread
https://forum.xda-developers.com/showthread.php?t=2588979
And download the twrp recovery image. From this thread
#the recovey is named recovery.img#
https://forum.xda-developers.com/android/general/tutorial-how-to-install-twrp-zte-blade-t2953998
*1* Download and install the adb on ur pc and put the custom recovery in any folder #inside an empty folder with the recovery is the best choice#
*2* After installing the adb.. Go inside the folder that contains the recovery.img...
*3* #without highlighting any file# put ur mouse pointer at any empty space in the folder , HOLD SHIFT AND RIGHT CLICK ON YOUR MOUSE. And there will be an extra option that says Open Command Prompt here or Open Power Shell here
*4* Try to boot up ur device as far as it can go in this case the zte logo and and on the pc inside the command prompt from *3* and type in adb devices and press enter.. If it shows a reading. Example, F2xhk7 device ur in luck... Go to *5*
.. But if it shows red notes.. . Try changing usb ports and usb cable #in my case before... The computer usb 3.0 port does not read my device.. *the usb port coloured blue*.. so I use other ports and it worked# :fingers-crossed:
If it still does not connect.. Then ur out of luck... The only way is through sp flash tool... Try asking one of the developers to help...
*5* congratulations if u made it here.. :laugh: now back on business...
-Type in adb reboot fastboot and the device will restart to fastboot
-Now type in fastboot flash recovery recovery.img note *the recovery.img must be the duplicate as the name of the recovery* * I repeat the command is. fastboot flash recovery recovery.img the word recovery is meant to be there *
- after the flash ,reboot the device into recovery by typing.
fastboot reboot recovery or either combimation of power and volume up button
If the recovery shows twrp.. Ur in luck then.. :laugh:

Jo_bell, you sir, are the man!:good: ....i will await your Google drive link. Would generating a scatter file require an actual working ZTE blade S7 to do? Or cant it be generated using a tool of some sort?

Jo_bell said:
Ok I will upload my backup rom to google drive and link will be sent on completion
I dont think sp flash tool can help on this... Becuase it needs the actual firmware scatter loading file... Which in this case... I dont have... :crying: still finding a way to create the scatter file myself.. No luck..
So.. Adb should be the hero here... But only if u hv usb debuging enabled before
Using a pc or laptop install adb to your pc/laptop from anywhere in xda...
The fastest and easiest is on this thread
https://forum.xda-developers.com/showthread.php?t=2588979
And download the twrp recovery image. From this thread
#the recovey is named recovery.img#
https://forum.xda-developers.com/android/general/tutorial-how-to-install-twrp-zte-blade-t2953998
*1* Download and install the adb on ur pc and put the custom recovery in any folder #inside an empty folder with the recovery is the best choice#
*2* After installing the adb.. Go inside the folder that contains the recovery.img...
*3* #without highlighting any file# put ur mouse pointer at any empty space in the folder , HOLD SHIFT AND RIGHT CLICK ON YOUR MOUSE. And there will be an extra option that says Open Command Prompt here or Open Power Shell here
*4* Try to boot up ur device as far as it can go in this case the zte logo and and on the pc inside the command prompt from *3* and type in adb devices and press enter.. If it shows a reading. Example, F2xhk7 device ur in luck... Go to *5*
.. But if it shows red notes.. . Try changing usb ports and usb cable #in my case before... The computer usb 3.0 port does not read my device.. *the usb port coloured blue*.. so I use other ports and it worked# :fingers-crossed:
If it still does not connect.. Then ur out of luck... The only way is through sp flash tool... Try asking one of the developers to help...
*5* congratulations if u made it here.. :laugh: now back on business...
-Type in adb reboot fastboot and the device will restart to fastboot
-Now type in fastboot flash recovery recovery.img note *the recovery.img must be the duplicate as the name of the recovery* * I repeat the command is. fastboot flash recovery recovery.img the word recovery is meant to be there *
- after the flash ,reboot the device into recovery by typing.
fastboot reboot recovery or either combimation of power and volume up button
If the recovery shows twrp.. Ur in luck then.. :laugh:
Click to expand...
Click to collapse
So hows the upload coming along?

TWRP 3.1.1-1 Full + Stock B16 for TWRP (Full+Clean)
https://www.androidfilehost.com/?w=files&flid=211817

NFound said:
TWRP 3.1.1-1 Full + Stock B16 for TWRP (Full+Clean)
https://www.androidfilehost.com/?w=files&flid=211817
Click to expand...
Click to collapse
I don't see this will help though. The phone wont boot up, so I cant put the phone in recovery mode or download mode.
So I cant flash TWRP or even do SD card upgrade with it. If there's anything in that firmware from the link you left above that
can help boot up the phone again, please by all means point it out.
I really appreciate it thanks

how do i update to custom roms
NFound said:
TWRP 3.1.1-1 Full + Stock B16 for TWRP (Full+Clean)
https://www.androidfilehost.com/?w=files&flid=211817
Click to expand...
Click to collapse
could you please explain the process of updating to the custom roms from a working S7. please. thx

Need TWRP Backup of UK version, a2017g

Hi,
I rooted my ZTE Axon 7 UK version, A2017G and i accidentally formatted the system, currently i have the US version of the software running but i dont have any WIFI
thanks for the help in advance

Can't help you with the European system
But have you tried flashing B20 boot.img from tenfar tool ? Might solve your wifi issue...
If that works, it's awesome !

shia786 said:
Hi,
I rooted my ZTE Axon 7 UK version, A2017G and i accidentally formatted the system, currently i have the US version of the software running but i dont have any WIFI
thanks for the help in advance
Click to expand...
Click to collapse
djona12 said:
Can't help you with the European system
But have you tried flashing B20 boot.img from tenfar tool ? Might solve your wifi issue...
If that works, it's awesome !
Click to expand...
Click to collapse
the A2017G have a FULL FACTORY UPDATE IMAGE (B02) you guys are actually lucky in that department, us A2017U we wish had one.
here : http://forum.xda-developers.com/axon-7/how-to/a2017g-b02-update-released-europe-t3440619

i cannot seem to find tenfar tool anywhere
DrakenFX said:
the A2017G have a FULL FACTORY UPDATE IMAGE (B02) you guys are actually lucky in that department, us A2017U we wish had one.
here : http://forum.xda-developers.com/axon-7/how-to/a2017g-b02-update-released-europe-t3440619
Click to expand...
Click to collapse

i have found the tool but i think i flashed the US version of the boot image now my phone does not boot up at all,
it goes to stock recovery
if i turn the phone on then it goes to ZTE LOGO for about half a second then the screen goes blank
i can access fastboot but only through stock recovery which when i go to bootloader i cannot run any fastboot commands, even if i run fastboot reboot it does not reboot the phone at all
shia786 said:
i cannot seem to find tenfar tool anywhere
Click to expand...
Click to collapse

Got the same problem, i've formatted the system and now i can only go to the stock recovery, i can't reboot to edl mode by pressing both volume buttons doing this a Handset Diagnostic Interface (DFU) appears in my Device Manager instead of Qualcomm USB device, so i can't install a TWRP.

shia786 said:
i cannot seem to find tenfar tool anywhere
Click to expand...
Click to collapse
Cricius said:
Got the same problem, i've formatted the system and now i can only go to the stock recovery, i can't reboot to edl mode by pressing both volume buttons doing this a Handset Diagnostic Interface (DFU) appears in my Device Manager instead of Qualcomm USB device, so i can't install a TWRP.
Click to expand...
Click to collapse
As I said before, YOU GUYS have full update file posted the link (thread) about... You DON'T need @tenfar tools to use the FULL A2017G update (B02) , download the file (like 2.2gb I guess) and flashed using stock recovery.

DrakenFX said:
As I said before, YOU GUYS have full update file posted the link (thread) about... You DON'T need @tenfar tools to use the FULL A2017G update (B02) , download the file (like 2.2gb I guess) and flashed using stock recovery.
Click to expand...
Click to collapse
When I press update from SD card it comes up with cannot update from SD card, when I try to do ADB side load and says cannot read file

shia786 said:
When I press update from SD card it comes up with cannot update from SD card, when I try to do ADB side load and says cannot read file
Click to expand...
Click to collapse
Try enable " OEM Unlocking " under developers option and try again

DrakenFX said:
Try enable " OEM Unlocking " under developers option and try again
Click to expand...
Click to collapse
I cannot access the software at all, all I got is stock recovery

shia786 said:
I cannot access the software at all, all I got is stock recovery
Click to expand...
Click to collapse
Try using that same full update with twrp,
As title said you can boot only to TWRP? From there you may be able to flash the zip.

DrakenFX said:
Try using that same full update with twrp,
As title said you can boot only to TWRP? From there you may be able to flash the zip.
Click to expand...
Click to collapse
I no longer have access to TWRP recovery as I flashed stock recovery to install the firmware file using stock recovery but somehow the os got screwed up and now the only thing I have access to is stock recovery

shia786 said:
I no longer have access to TWRP recovery as I flashed stock recovery to install the firmware file using stock recovery but somehow the os got screwed up and now the only thing I have access to is stock recovery
Click to expand...
Click to collapse
You can just boot into TWRP using tenfar tools and Flash the zip.

DrakenFX said:
You can just boot into TWRP using tenfar tools and Flash the zip.
Click to expand...
Click to collapse
For me to use the tool I need to access the phone in edl mode which I cannot do because I do not have access to ADB

shia786 said:
For me to use the tool I need to access the phone in edl mode which I cannot do because I do not have access to ADB
Click to expand...
Click to collapse
and not having access to adb, you meant don't have a PC/Laptop?
Cuz there is an alternative way how to boot to " edl "
- turn your phone completely off
- press and hold Volume DOWN & UP
- plug your device to your PC/Laptop

DrakenFX said:
and not having access to adb, you meant don't have a PC/Laptop?
Cuz there is an alternative way how to boot to " edl "
- turn your phone completely off
- press and hold Volume DOWN & UP
- plug your device to your PC/Laptop
Click to expand...
Click to collapse
so what i mean by i cannot access ADB is that the phone has stock recovery in which there is no ADB functionality, i cannot access the OS so i cannot use ADB that way either,
i tried the method above to go into edl mode but it just goes onto a black screen where the led light flashed red and green and the computer does not recognise anything being plugged in, not even the system sound,
I have the correct drivers installed as i used his before when the OS was working

shia786 said:
so what i mean by i cannot access ADB is that the phone has stock recovery in which there is no ADB functionality, i cannot access the OS so i cannot use ADB that way either,
i tried the method above to go into edl mode but it just goes onto a black screen where the led light flashed red and green and the computer does not recognise anything being plugged in, not even the system sound,
I have the correct drivers installed as i used his before when the OS was working
Click to expand...
Click to collapse
Hi,
I have the exact same issue
Did you find a way to get your phone booting again ?

DrakenFX said:
and not having access to adb, you meant don't have a PC/Laptop?
Cuz there is an alternative way how to boot to " edl "
- turn your phone completely off
- press and hold Volume DOWN & UP
- plug your device to your PC/Laptop
Click to expand...
Click to collapse
That doesn't work on the A2017G, you have to use "adb reboot edl", so you see the problem. Also, the A2017G doesn't actually have an EDL mode but something very similar that's ZTE call Handset diagnostic Interface - quite why, who knows, this is ZTE after all...

Upgrading P8 Lite Dual Sim from ALE21 C636B150 EMUI 3.1

Guys I'm really lost trying to upgrade to Android 6 or even 7.
I know I must upgrade to at least EMUI 4.0
I know I am rooted.
I'm unsure if I have unlocked my boot loader.
How do I easily change Country Codes? Do I even need to do it?
I think if someone can assist with these early steps, then I can proceed alone to install new ROMs etc.

C636 is for South East / South Asian regions...
To check whether you've unlocked your bootloader or not, just boot into the fastboot mode... To do that, shut down your device completely then connect your device to your laptop / PC holding the volume down button. Once you enter into fastboot mode, there a Message will be displayed under the Android Logo. You can confirm whether your bootloader is locked or not.
If your only goal is to get Marshmallow, then you can search for firmware and then manually upgrade using the dload method.
First, you download the required firmware (gradually up to Marshmallow), then you extract the update.zip to get UPDATE.APP file (usually 2.3GB+). Then you copy the UPDATE.APP file into a folder named dload. You must then copy this dload folder to the root of Internal Memory and you can update your Android through Updater.
Here's the link to Marshmallow C636B540

amageek said:
C636 is for South East / South Asian regions...
To check whether you've unlocked your bootloader or not, just boot into the fastboot mode... To do that, shut down your device completely then connect your device to your laptop / PC holding the volume down button. Once you enter into fastboot mode, there a Message will be displayed under the Android Logo. You can confirm whether your bootloader is locked or not.
If your only goal is to get Marshmallow, then you can search for firmware and then manually upgrade using the dload method.
First, you download the required firmware (gradually up to Marshmallow), then you extract the update.zip to get UPDATE.APP file (usually 2.3GB+). Then you copy the UPDATE.APP file into a folder named dload. You must then copy this dload folder to the root of Internal Memory and you can update your Android through Updater.
Here's the link to Marshmallow C636B540
Click to expand...
Click to collapse
Okay, yes all that is cool. Further info I have now managed to instal TWRP 2.8.7. So I will try to now install c636B540.

aussie_boi said:
Okay, yes all that is cool. Further info I have now managed to instal TWRP 2.8.7. So I will try to now install c636B540.
Click to expand...
Click to collapse
try installing TWRP v. 3.1.1... That's the latest TWRP and compatible with Marshmallow...

P10 lite bricked

Hi,
I flashed xenonHD ROM by HassanMirza week ago.
Today i heard the android 8 comes to huawei p10 lite.
I'd like to back to stock rom
I tried dload method, fastboot mode (flashes, but not booting)
I don't know how to do it
pls help

https://forum.xda-developers.com/p10-lite/development/compilation-firmware-flash-emui-8-0-0-t3777658

Jaizu said:
https://forum.xda-developers.com/p10-lite/development/compilation-firmware-flash-emui-8-0-0-t3777658
Click to expand...
Click to collapse
Thanks a lot

HYPER98889 said:
Hi,
I flashed xenonHD ROM by HassanMirza week ago.
Today i heard the android 8 comes to huawei p10 lite.
I'd like to back to stock rom
I tried dload method, fastboot mode (flashes, but not booting)
I don't know how to do it
pls help
Click to expand...
Click to collapse
after few tries it's not working
twrp flashes it but i cant boot to system (bootanimation is mising, after few seconds it restarts the phone and showing erecovery)

HYPER98889 said:
Hi,
I flashed xenonHD ROM by HassanMirza week ago.
Today i heard the android 8 comes to huawei p10 lite.
I'd like to back to stock rom
I tried dload method, fastboot mode (flashes, but not booting)
I don't know how to do it
pls help
Click to expand...
Click to collapse
- Download with Huawei Firmware Finder right files your phone (common base -> filelist, copy link internet browser (download all). You can put your own model in setting)
(example europe version WAS-LX1C432 , i think 2 sim hw L21 and 1 sim hw L01, before this i was WAS-LX1C432B206 )
http://pro-teammt.ru/projects/hwff/GetLatestVersion.action
- Extract files with HuaweiUpdateExtractor
http://forum.xda-developers.com/attachment.php?attachmentid=3262545
Need extract for multi-tool 8: BOOT.img, CUST.img, RECOVERY.img, RECOVERY2.img, SYSTEM.img, UPDATE.APP).
(because i not really remeber , try all other files from update.app from *hw*.zip and update.app from update.zip
Please fix is not right, is is possible both are same)
- Multi-Tool 8 -> unbrick
http://pro-teammt.ru/projects/hwmt/release/Multi-Tool 8.msi
Turn phone off from TWRP (reboot, shutdown)
press vol - and put usb cable in pc (need go download mode, repeat if need, if pc not reconize put phone normat booting with usb and go coffee)
try twice if need with swipe cache.
Maybe it end error message but running right.
- If all seems be fine, relock bootloader
Turn off phone
press vol - and put usb cable in pc (need go download mode, repeat if need)
(Run in bat file or type in command window , your own bootloader opening code from huawei.)
fastboot oem relock "your opening code"
Good luck, i repair no system files with this.
I was first timer, so try understand poor instructions.
HWOTA, Sideload, Dload not working with me.

Mikelsson70 said:
- Download with Huawei Firmware Finder right files your phone (common base -> filelist, copy link internet browser (download all). You can put your own model in setting)
(example europe version WAS-LX1C432 , i think 2 sim hw L21 and 1 sim hw L01, before this i was WAS-LX1C432B206 )
http://pro-teammt.ru/projects/hwff/GetLatestVersion.action
- Extract files with HuaweiUpdateExtractor
http://forum.xda-developers.com/attachment.php?attachmentid=3262545
Need extract for multi-tool 8: BOOT.img, CUST.img, RECOVERY.img, RECOVERY2.img, SYSTEM.img, UPDATE.APP).
(because i not really remeber , try all other files from update.app from *hw*.zip and update.app from update.zip
Please fix is not right, is is possible both are same)
- Multi-Tool 8 -> unbrick
http://pro-teammt.ru/projects/hwmt/release/Multi-Tool 8.msi
Turn phone off from TWRP (reboot, shutdown)
press vol - and put usb cable in pc (need go download mode, repeat if need, if pc not reconize put phone normat booting with usb and go coffee)
try twice if need with swipe cache.
Maybe it end error message but running right.
- If all seems be fine, relock bootloader
Turn off phone
press vol - and put usb cable in pc (need go download mode, repeat if need)
(Run in bat file or type in command window , your own bootloader opening code from huawei.)
fastboot oem relock "your opening code"
Good luck, i repair no system files with this.
I was first timer, so try understand poor instructions.
HWOTA, Sideload, Dload not working with me.
Click to expand...
Click to collapse
I cant find the userdata.img and the ramdisk_recovery

You you have the stock e-recovery (nougat)?
If yes try to "update" to the firmware service repair (emui 5): http://androidhost.ru/JS
Or try to update to stock oreo (you can see my EMUI 8 post)

Bricked my zenfone 3 (ZE520KL)

hi, i have flash this firmware
ZE520KL_V13_13_1_36_M2_6_7_P7_Factory_raw
fastboot modded but now i can t do anything and my notebook not see my phone can anyone help me? thx

Putting the phone into EDL and using QFIL to load the stock rom is probably your best bet

what is EDL and i never used QFIL there is a guide for this? thx

sgjk86 said:
what is EDL and i never used QFIL there is a guide for this? thx
Click to expand...
Click to collapse
EDL is basically a state built in to Qualcomm chips that allows it to load firmware to unbrick when it can't load Android. QFIL can be found at https://qfiltool.com/qfil-tool-v2-0-3-5 and a stock rom can be found here https://firmwarefile.com/asus-zenfone-3-z017d-ze520kl. The QFIL tool link has its own instructions link by the download button but in short you'll want to install Qualcomm's QFIL USB drivers, open QFIL's .exe, select the .mbn from the stock rom, and hit download. It'll start flashing.

need deep flash cable for enter in EDL mode?

sgjk86 said:
need deep flash cable for enter in EDL mode?
Click to expand...
Click to collapse
No, you can use the standard microUSB cable you were using. All you need are the USB drivers (link is in QFIL's tutorial), QFIL itself, and the stock rom for the .mbn file to flash.

EDL mode will automatically be handled by QFIL itself as long as the device is on as shown in the tutorial.

i have install driver but NOTEBOOK not see smartphone in fastboot mode... ( must try the cable? ) and where i find .mbn file for firmware?

The driver from the QFIL tutorial doesn't allow platform tools to see it, it allows QFIL to see it. You need to download QFIL and follow its tutorial. The .mbn file is with the firmware download I also linked.

n00bl3x said:
The driver from the QFIL tutorial doesn't allow platform tools to see it, it allows QFIL to see it. You need to download QFIL and follow its tutorial. The .mbn file is with the firmware download I also linked.
Click to expand...
Click to collapse
That firmware only supports fastboot commands with a .bat file.

sgjk86 said:
i have install driver but NOTEBOOK not see smartphone in fastboot mode... ( must try the cable? ) and where i find .mbn file for firmware?
Click to expand...
Click to collapse
Try this guide here.This should explain everything to get it working again.Best of luck!
Unbrick a Bricked ZenFone 3 (ZE520KL/ZE552KL) (Full Guide) - Techtrickz
In this guide, we show you how to unbrick a bricked ZenFone 3 ZE520KL and ZE552KL by restoring bootloader and latest version of stock firmware. Installing custom recovery like TWRP, custom ROM, custom kernel and getting root are fine, but sometimes these will brick your device leaving it a...
techtrickz.com

Surgemanxx said:
That firmware only supports fastboot commands with a .bat file.
Click to expand...
Click to collapse
Ah, downloaded it and I see what you mean. Thanks!

n00bl3x said:
Ah, downloaded it and I see what you mean. Thanks!
Click to expand...
Click to collapse
No problem!That guide should get it back factory for them at least!

Surgemanxx said:
Try this guide here.This should explain everything to get it working again.Best of luck!
Unbrick a Bricked ZenFone 3 (ZE520KL/ZE552KL) (Full Guide) - Techtrickz
In this guide, we show you how to unbrick a bricked ZenFone 3 ZE520KL and ZE552KL by restoring bootloader and latest version of stock firmware. Installing custom recovery like TWRP, custom ROM, custom kernel and getting root are fine, but sometimes these will brick your device leaving it a...
techtrickz.com
Click to expand...
Click to collapse
so, i put original last firmware in a micro sd and run it from recovery and i replace all?

sgjk86 said:
so, i put original last firmware in a micro sd and run it from recovery and i replace all?
Click to expand...
Click to collapse
You can do it both ways from what that guide says.Personally,I would try to restore via fastboot

Surgemanxx said:
You can do it both ways from what that guide says.Personally,I would try to restore via fastboot
Click to expand...
Click to collapse
i can t run on fastboot the phone stay on screen at first post and notebook not see nothing so i think my last hope is to put firmware in micro sd and try to install from original recovery the firmware i have now.is.the same of this topic
UNLOCK/LOCK Bootloader For ZenFone 3 ZE520KL/ZE552KL
Mod info: Method doesn't work anymore and will result in a hard brick. Make sure you’ve backed up all of your IMPORTANT DATA before unlocking/relocking bootloader I am not responsible for bricked devices and dead SD cards. YOU are choosing to...
forum.xda-developers.com

sgjk86 said:
i can t run on fastboot the phone stay on screen at first post and notebook not see nothing so i think my last hope is to put firmware in micro sd and try to install from original recovery the firmware i have now.is.the same of this topic
UNLOCK/LOCK Bootloader For ZenFone 3 ZE520KL/ZE552KL
Mod info: Method doesn't work anymore and will result in a hard brick. Make sure you’ve backed up all of your IMPORTANT DATA before unlocking/relocking bootloader I am not responsible for bricked devices and dead SD cards. YOU are choosing to...
forum.xda-developers.com
Click to expand...
Click to collapse
Give it a try!You have all the information to get it working again!Here's the direct link for the firmware straight from Asus.Just pick the one that matches your device and rename it update.zip.
ZenFone 3 (ZE520KL) - Support
www.asus.com