Related
I have problem runing script from init.d folder. Script maked by link2sd work, but every script i add wont run on boot.
I set same permision liki in link2sd script... any idea?
when try to open script from init.d folder with root explorer there is no txt. :/
Have you tried script manager?
sent from my gt540 mur4ik RC0 806mhz
yes, it`s work when run script manueli... but not working when set run on boot.
goto data/local and edit the userinit and put this code in it
sh /system/etc/init.d/scriptname
that should force the script to run.
i dont have userinit in data/local
just to create it, or...?
yes just create a userinit.sh file then put the command in it
not working, strange...
can you upload the script you are trying to run so i can do some tests for you?
yes, it`s simple script to enable swap on swap partition. work fine when run it with gscript, script manager... but i want to run it auto on boot.
edit the script to look like this
Code:
#!/system/bin/sh
#
# enable swap on ext partition
#
echo 30 > /proc/sys/vm/swappiness
swapon /dev/block/mmcblk0p3
noup, mmcblk0p3: no such file or directory.
have you partitioned your sdcard properly and what way did you do it?
yes, i partitioned it with recovery. swap work fine when i run script manuele, or run comand with terminal. problem is than script wont run on boot, not only this one, v6 super charger wont run eather.
--------
i forgot, i use greendroid 2.0 and 666 infernal kernel
god thats odd what rom are you using mur4iks,joes or one of the softmod GB
greendroid 2.0 and 666 infernal kernel
this kernel hava init.d suport... i think.
it should support swap ok because init.d folder belongs to busybox which the ROM has i would say for you to get the best from your phone is to upgrade to a gingerbread rom preferably CM7 as it supports swap straight fro boot and it also allow V6 SuperCharger to run properly i can help with a 2.1 rom because i only had 2.1 on my phone for 30seconds before flashing a 2.2 CM6 rom.
i use CM7 before (mur4iks M6 was last i try), but every day there was some little bug, and i have big problem with battery, gps... so i went back to 2.1.
tnx for try helping me.
no problem sorry i couldn't help more.
Saw this today http://forum.xda-developers.com/showthread.php?t=1111145 ... I wonder if we could put that script into the install-recovery.sh file (remove the recovery stuff) and have that kicked off every boot? Any thoughts or anyone want to test? I'm at work currently so I wont be able to try till later.
I'm a bit leery about the actual script itself, but you can prob just download the cwm installer and flash it.
or
You can also toss it in /system/etc/init.d and set permissions to 777 (rwxrwxrwx)
this is true for most scripts that run at startup
Do the stock kernels support init.d?
I dont know offhand but i would assume it does.
Streakdroid definitely does as it bundles a script in init.d
Well......
I tried this .... choosed the cwm flsdhable zip version.
5 minutes back i flashed it , no change till now (but feeling lil slow ).
will keep posting if something increased or decrease.........
may this thing can b helpfull for our streak dev's
Smooth but battery lol fast drain
Sent from my Dell Streak using XDA App
This is a list of Galaxy Ace ROM, kernel, and tweaks that (when combined) will make your Ace run blazingly fast!
Tested by me.
I'm not responsible if your Ace went wrong. Make a backup first.
Before we start, make sure you have backup for your important data and applications.
Best ROM
Not sure which is the best ROM, it's relative. So far, for stock ROM lovers you can use Blackhawk ROM by ketut.kumajaya
Best Kernel
CF-Root for S5830. I have no comments. An amazing kernel.
Best RAM Tweak (for stock ROMs without CF-Root only)
Juwe's RAM optimization script. It's working fine on Ace, but the boot time will take longer than usual.
Best Animation Tweak (will smoothen animations on stock XXKPH ROM and activate CRT animation on coderom)
Not sure who share this tutorial, but you will get smooth animations after you have applied this tweak. Using Root Explorer, mount /system/ to RW, edit build.prop, find debug.hw, add a hash "#" before it. Save and reboot. Original post here.
For the best result: make sure you have activate a2sd and convert filesystem to ext4 using ext4 Manager (available through CF-Root) and do NOT apply Conservative Gov (when applied, it will save battery life but will slow down performance)
Okay, that's all.
Please report to me if you get something wrong so I can revise this thread.
I was gonna install coderom for the reboot button feature (on phone options), but the link was down.
Please add this: enabling crt on gingerbread rom by adding a hash (#) to debug.hw in build.prop smoothen everything a lot, especially popups.
XDA ♥
- XXKPH
- Easy Deodex + Root (XDA)
- Zipalign on boot setting from A2SD GUI
- CF -Root updated to b78
- update to CWM 4.0.0.9
- Internal memory converted to ext 4 (by ext4 manager)
- set tweaks => default (no checked list)
thats great combine! i've used this...
very smoothly guys...
thanks,just flash up the RAM optimizer with CWM~
fla.sh said:
This is a list of Galaxy Ace ROM, kernel, and tweaks that (when combined) will make your Ace run blazingly fast!
Tested by me.
I'm not responsible if your Ace went wrong. Make a backup first.
Before we start, make sure you have backup for your important data and applications.
Best ROM
Coderom.NexusAce by code28h4p. The original download link was removed by Moderator because it's contains warez.
Further instructions: How to flash coderom.nexusace and How to setup a2sd with coderom.nexusace.
Best Kernel
CF-Root for S5830. Original post (in Indonesian) here.
Best RAM Tweak
Juwe's RAM optimization script. It's working fine on Ace, but the boot time will take longer than usual.
Okay, that's all.
Please report to me if you get something wrong so I can revise this thread.
Click to expand...
Click to collapse
Hi fla.sh,
I don't think anyone will go wrong when they have great combo like this. I have all of them in my SGA. (Of course with CRT as mentioned by consegregate)
Now my ace runs very smoothly.
Hey, if I apply the ram optimization... how do I get to the original configuration? A flash of the kph rom (the one i have) would be enough?
I'd say just deleting the script file should be enough.
And lol that's exactly what I have on my Ace. Plus the CRT animation.
Tap-a-talked from my Galaxy Ace
Diliban said:
Hi fla.sh,
I don't think anyone will go wrong when they have great combo like this. I have all of them in my SGA. (Of course with CRT as mentioned by consegregate)
Now my ace runs very smoothly.
Click to expand...
Click to collapse
Hi,
I have this question for you... Do I need to install everything in the post CF-Root for S5830 like CF root manager, Tweak, EXT4 Manager etc., or just the below mentioned part is enough?
I just flashed this part to my SG Ace.
Instructions (long)
- Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
- Unzip CF-Root-S5830-v3.7-b78.zip
- (USB) Disconnect your phone from your computer
- Start ODIN v4.38
- Click the OPS button, and select Cooper_v1.0.ops
- Click the PDA button, and select CODE_S5830XXKPH_CL260130_REV03-CF-Root-v3.7-b78.tar.md5
- Put your phone in download mode
- (USB) Connect the phone to your computer
- Click the START button
- Wait for the phone to reboot
- Done (if it took you more than 30 seconds, you need practise!)
I tried Quardant after installing this Kernel which gave me 1043 (sdcard class 2) which is as equal to what I got before without this kernel. What is your thought?
Quadrant won't show any difference until you convert your system to ext with the exr4 manager.
Tap-a-talked from my Galaxy Ace
Hi mate, any chance of a pm maybe ?with the bit's to try this rom out? can't find dou to link being removed. thanks.
Added CRT animation tweak
QNBT said:
I was gonna install coderom for the reboot button feature (on phone options), but the link was down.
Kind enough to PM it to me?
Thanks in advance!
Google it, type "coderom nexus" first result its the rom 4shared download.
Click to expand...
Click to collapse
CF-Root have all Juwe's RAM script options with different values. If you don't mind, I could write a CWM update package to set CF-Root using JRS value and enabling animation CRT ("setprop build.sf.hw 0").
ketut.kumajaya said:
CF-Root have all Juwe's RAM script options with different values. If you don't mind, I could write a CWM update package to set CF-Root using JRS value and enabling animation CRT ("setprop build.sf.hw 0").
Click to expand...
Click to collapse
Wow... I don't know that. I was including JRS just because if someone has XXKPH rom without CF-Root, they can increase free RAM
a little bit Indonesian: Om Ketut kapan nih release CF-Root berikutnya?
fla.sh said:
Wow... I don't know that. I was including JRS just because if someone has XXKPH rom without CF-Root, they can increase free RAM
a little bit Indonesian: Om Ketut kapan nih release CF-Root berikutnya?
Click to expand...
Click to collapse
But only CF-Root executing script in /system/etc/init.d
Rencana u/ CF-Root:
1. Menjalankan dtapps2sd script di mode recovery
2. Kompilasi ulang kernel untuk mendukung ext4 data writeback
fla.sh said:
This is a list of Galaxy Ace ROM, kernel, and tweaks that (when combined) will make your Ace run blazingly fast!
Tested by me.
I'm not responsible if your Ace went wrong. Make a backup first.
Before we start, make sure you have backup for your important data and applications.
Best ROM
Coderom.NexusAce by code28h4p. The original download link was removed by Moderator because it's contains warez.
Further instructions: How to flash coderom.nexusace and How to setup a2sd with coderom.nexusace.
Best Kernel
CF-Root for S5830. Original post (in Indonesian) here.
Best RAM Tweak
Juwe's RAM optimization script. It's working fine on Ace, but the boot time will take longer than usual.
Best Animation Tweak (will smoothen animations on stock XXKPH ROM and activate CRT animation on coderom)
Not sure who share this tutorial, but you will get smooth animations after you have applied this tweak. Using Root Explorer, mount /system/ to RW, edit build.prop, find debug.hw, add a hash "#" before it. Save and reboot. Original post here.
For the best result: make sure you have activate a2sd and convert filesystem to ext4 using ext4 Manager (available through CF-Root) and do NOT apply Conservative Gov (when applied, it will save battery life but will slow down performance)
Okay, that's all.
Please report to me if you get something wrong so I can revise this thread.
Click to expand...
Click to collapse
Hi All,
I have an issue (may be not), I haven't installed the DT a2sd addon from this thread as I already run on coderom Nexus which has DT a2sd. I entered into Terminal and typed SU and then a2sd repair. After boot I saw i have only 24MB as EXT4 in a2sd GUI and Dalvik cache moved back to internal memory, but I created 2GB as EXT4 while partition which still appears in my Titanium backup. Did I do anything wrong? Which app is correct? Please help. I have uploaded screenshots from both apps.
royskeyz said:
QNBT said:
Google it, type "coderom nexus" first result its the rom 4shared download.
Click to expand...
Click to collapse
Thanks for the tip!
Still wondering if i'm able to backup my current data with CWM and restore them with the new ROM
Click to expand...
Click to collapse
Attachments here... Sorry missed them in the last post
Hello ACE user's I proudly present you the best of the best script ever made, created by zeppelinrox.
Well, the V6 Supercharger Script is an excellent tool to fix memory management on Android 2.3, just because the Gingerbread is very aggressive in memory management.
For best details on what this script do to your beloved phone visit his thread, he doesnt say this will run in ACE but i manage and tried to install in my phone and it works fine and now i say this is the best experience since i got this phone in my hands.
here we go.
Requirements:
1. Download busybox installer from market.
2. Download script manager from market.(make sure you instal this in INTERNAL memory)
3. Download V6 supercharger latest script from the original thread here.
4. Rootexplorer and of course you must be rooted.
Steps:
1. Run busybox installer and install busybox v1.18.2 (this will downgrade our current busybox v1.18.4) we need this because v1.18.3 above will cause an error which is not. (see attached image)
2. Run and configure script manager press the MENU button and go to MORE and then in ADVANCED OPTIONS and now in CONFIG and tick "browse as root" and leave other fields un-touch and exit. (see attached image)
3. Download V6 supercharger update8 script in original thread above and put in root of your sd card. (see attached image)
4. Run script manager by default it views the root of your sdcard find your downloaded V6 supercharger script and click/touch to it another window will appear tick "run as root" then run the script. (see attached image)
5. You will see the script running first chose a scrolling speed from 1-3 by touching the screen for the keyboard to pop-up (i prefer 3 for slow so you can follow the progress) then press enter in your keyboard.
6. Now you will see an option from 1-17 it has different value each option, select option 6 (balance 3) its the best for me, you can try other options of course, now press enter after typing # 6, wait to finish the scipt from running.
7. Now type option 16 to reboot the phone, the script will autorun, thats it enjoy and fell the greatness of your phone.
To check that the script is running and working please do step 4 and 5 and see attached image encircled in red if you have the same value then your good.
Optional: loopy smoothness. Very nice script and works very will with V6.
wow, supercharger..
surely will try it
Thanks
but there's is something written there
If you want to share this, just link to this thread.
If you want to make a thread in other forums telling people about it, that's great.
But I would prefer that you do not post a copy of the V6 SuperCharger installation script in those forums.
If you already have a thread with a copy attached, I won't bother you about it. But please don't attach further updates.
i have Check's RAM Management Script ☜☆☞ V4 Twin Turbo [CF-Root Adaptation] installed on my ace. can i install this v6 supercharger?
do i need to delete that script? if so how to delete?
thanks
+1... but can you explain more how and which areas it does the work and how it is better than others if any
Edit: sorry i went through the other thread and got some answers...Thanks neways
fantomatico said:
i have Check's RAM Management Script ☜☆☞ V4 Twin Turbo [CF-Root Adaptation] installed on my ace. can i install this v6 supercharger?
do i need to delete that script? if so how to delete?
thanks
Click to expand...
Click to collapse
You can delete his tweak using root explorer, go to system/etc/init.d, mount r/w first.
dungos said:
+1... but can you explain more how and which areas it does the work and how it is better than others if any
Edit: sorry i went through the other thread and got some answers...Thanks neways
Click to expand...
Click to collapse
I cant copy the original threads explanations, kindly visit his thread the link is above, you will know whats the big difference of his script than others.
seilent said:
wow, supercharger..
surely will try it
Thanks
but there's is something written there
If you want to share this, just link to this thread.
If you want to make a thread in other forums telling people about it, that's great.
But I would prefer that you do not post a copy of the V6 SuperCharger installation script in those forums.
If you already have a thread with a copy attached, I won't bother you about it. But please don't attach further updates.
Click to expand...
Click to collapse
I share here on what to do step by step in our ACE, its not there in his thread, but if someone knows how to install his script then one can go diectly to his thread for updating, BTW i will edit my post saying i will update if he has released new.
I always busybox error, asking me to change the version, I can not install ..... you know why? Thanks to all
kaarburo said:
I always busybox error, asking me to change the version, I can not install ..... you know why? Thanks to all
Click to expand...
Click to collapse
Did you follow the instruction? did you install the busybox 1.18.2?
How about CF-Root? Is this compatible with CF-Root? CF-Root has busybox preinstalled...
For example, Black Hawk has busybox v.1.17.1, there is no need to instal another version of busybox.
All works, thanks.
royskeyz said:
You can delete his tweak using root explorer, go to system/etc/init.d, mount r/w first.
Click to expand...
Click to collapse
His tweak overwrote 00tweaks on init.d wich came by default with CodeROM v2x-2b.
Any problem if i just leave it and install yours?
thanks
royskeyz said:
Did you follow the instruction? did you install the busybox 1.18.2?
Click to expand...
Click to collapse
yes, I installed busybox 1.18.2, but I error. KPN I + CF-Root v80 stocks, that is the problem?
impressions:
1. increased rate of transitions from the menu.
2. pause when awake is almost negligible.
3... in progress)
EDIT: Nevermind... nice share!
From Chainfire's note:
It is possible to install a custom busybox over CF-Root v3.0 and newer. However, this is not without risk. CF-Root makes heavy use of scripting, and many CF-Root scripts rely on the internal busybox version. If you do install a seperate busybox version (always use "stericson" installer!), install it to /system/xbin. Installing it to /system/bin will mess things up for sure. Even if you do that part right, it may still break CF-Root, so make sure to make a backup before trying.
Click to expand...
Click to collapse
Higher version or even same version but compiled by different person (so could be have different applet compiled in) not always good for CF-Root. For an example, busybox without sh applet will break CF-Root including some user space applications.
I hit clear memory in task manager and started laughing when it showed 84 mb used, hahaha. Generally good in multitasking.
consegregate said:
I hit clear memory in task manager and started laughing when it showed 84 mb used, hahaha. Generally good in multitasking.
Click to expand...
Click to collapse
I have 125 only.
installed....good....seen a change in ram usage...less ram being used
During installation the script I saw a message that applies a patch to prevent the closure of the launcher. If I clear the memory in the task manager launcher is unloaded from memory. Or script does not work, or ... script does not work).
Xt907 rooted. Ss installed. I created a rom slot, backed up, and installed to stock slot.
Everything works fine but after a few reboots I lose init.d. I'm using rage-m, I update busybox and supersu after every install, and i use xposed (xblast, gravity box, and xui).
Any ideas? I lose the custom governors and schedulers as well.
Because I was losing the governors I thought somehow the kernel itself was being replaced somehow. Upon further inspection, I found that the governors and schedulers were actually an init.d script with library modules (which makes sense considering they were lost with init.d). After some trial and error I discovered that upon updating the included busybox (1.21.0) with busybox pro to the xbin or bin folder I will lose init.d support. Really curious as to why that is. Anything to do with symlinks?
infinite.galaxi said:
Xt907 rooted. Ss installed. I created a rom slot, backed up, and installed to stock slot.
Everything works fine but after a few reboots I lose init.d. I'm using rage-m, I update busybox and supersu after every install, and i use xposed (xblast, gravity box, and xui).
Any ideas? I lose the custom governors and schedulers as well.
Click to expand...
Click to collapse
You can try to install Pimp my ROM and turn init.d on
It seems that Busybox 1.22.1 is the culprit. Reverting to 1.21.1 leaves init.d intact. Thanks ^ tho pimp my rom looks cool. I want dat Bravia doe. v4a ftw!