[Q] Can't flash SuperSU to Nexus 4 on Android 4.3 - Nexus 4 Q&A, Help & Troubleshooting

Hi, any help resolving this would be really appreciated. I have updated my Nexus 4 to Android 4.3 by installing through CWM. The upgrade worked fine however I cannot flash the SuperSU zip afterwards. I am using the experimental version released specifically for 4.3 however I just get the message: unable to open 'file', installation aborted (bad). I have tried to redownload in case it was a corrupt zip but I just get the same result. I have also tried reflashing 4.3 but this doesn't make a difference either.The old SuperSU is still installed but states that it has no binaries if I try to open it.
Sorry if this has been covered elsewhere but I have been searching all evening for a solution.
Sam

shardy said:
Hi, any help resolving this would be really appreciated. I have updated my Nexus 4 to Android 4.3 by installing through CWM. The upgrade worked fine however I cannot flash the SuperSU zip afterwards. I am using the experimental version released specifically for 4.3 however I just get the message: unable to open 'file', installation aborted (bad). I have tried to redownload in case it was a corrupt zip but I just get the same result. I have also tried reflashing 4.3 but this doesn't make a difference either.The old SuperSU is still installed but states that it has no binaries if I try to open it.
Sorry if this has been covered elsewhere but I have been searching all evening for a solution.
Sam
Click to expand...
Click to collapse
Did you try flashing the latest supersu? I've flashed this one https://www.dropbox.com/s/p97y9pn4tie9iyi/UPDATE-SuperSU-v1.43.zip pressed "go back" when recovery asked to fix recovery or something like that and it works just fine

Ah, The version I have is 1.41 not 1.43, although I guess I downloaded from an older post in the blog. Thank you, hopefully that will work.
Sent from my Nexus 4 using xda app-developers app

Unfortunately this still hasn't worked, I have tried v1.43 of SuperSU, still failes. I have also changed my recovery from CWM to TWRP but this also fails to flash SuperSU v1.43 with the same error. Any other suggestions?

I think I have resolved this now, I had to sideload the SuperSU file on instead, so far so good.
Thanks.

shardy said:
I think I have resolved this now, I had to sideload the SuperSU file on instead, so far so good.
Thanks.
Click to expand...
Click to collapse
I have the same issue. I also notice root explorer can't look inside zip files. It seems like whatever custom recoveries and other apps use to extract zip files is busted/removed after our 4.3 update. Is this a busybox issue? Side loading might use extraction tools on the computer instead?

I resolved this too. It turned out the super SU zip file I had grabbed for 1.43 wasn't the normal CWM/TWRP recovery package. When I looked at the zip file on my computer I noticed it contained another compressed file. I waited a few days root-less and then noticed that super SU 1.51 had been released. I used this file and it worked like it should have the first time. This package looks like the normal recovery flashable file, with the manifest and directory structure it should have. So either I grabbed the wrong file or there was a moment in time when the chainfire's site was dishing out bad files.
Glad it's working now, root is restored.

shardy said:
I think I have resolved this now, I had to sideload the SuperSU file on instead, so far so good.
Thanks.
Click to expand...
Click to collapse
Can you elaborate, as to what exactly you did to restore the root?

Related

[Q] Update to 4.1.2 fails - error 7, patch check - need new PlusOne.apk?

I've been spending a few hours trying to fix this - when upgrading from 4.1.1 to 4.1.2 either OTA or via sideloading through ADB I get an error saying "assert(apply_patch_check("/system/app/PlusOne.apk" has failed and I am unable to complete upgrade.
I tried downloading 4 different plusone.apk's and none have rectified this problem. I also tried removing the check for plusone.apk from the updater script and re-zipping the files to no avail.
Can anyone help? Either with a correct PlusOne.apk I can put in system/app or by explaining what I can do to update without resettingback to factory first?
I am on 4.1.1, JRO03D. I converted PlusOne into a user app after I got the nexus using TB and have since converted it back to a system app and placed various PlusOne.apk's in the system/app folder.
I APPRECIATE ANY HELP!!!
zdeno888 said:
I've been spending a few hours trying to fix this - when upgrading from 4.1.1 to 4.1.2 either OTA or via sideloading through ADB I get an error saying "assert(apply_patch_check("/system/app/PlusOne.apk" has failed and I am unable to complete upgrade.
I tried downloading 4 different plusone.apk's and none have rectified this problem. I also tried removing the check for plusone.apk from the updater script and re-zipping the files to no avail.
Can anyone help? Either with a correct PlusOne.apk I can put in system/app or by explaining what I can do to update without resettingback to factory first?
I am on 4.1.1, JRO03D. I converted PlusOne into a user app after I got the nexus using TB and have since converted it back to a system app and placed various PlusOne.apk's in the system/app folder.
I APPRECIATE ANY HELP!!!
Click to expand...
Click to collapse
not sure if I will be a big help, but try to download the 4.1.2 OTA upgrade, and put in N7, then hoping you have CWM if not, just install Clockwork recovery if you have not done so, then boot in clockwork recovery, once you are clockwork recovery, make sure "signature check" is disabled, and install from zip option, point where you put 4.1.2 OTA upgrade file, and then reboot.
I am thinking that error you get most likely signature check since you converted to user app and then converted back to system app.
If you have removed any system apps the upgrade will fail.
Download this and flash from custom recovery
http://androidforums.com/nexus-7-all-things-root/630284-4-1-2-update-rooted-users.html
Rootbrain
I am trying to do it through CWM now... if I try the second option, downloading and flashing from the file will I lose all my data and apps, correct? I am trying to avoid having to restore everything.
Thank you both for your help!
jazzespresso said:
not sure if I will be a big help, but try to download the 4.1.2 OTA upgrade, and put in N7, then hoping you have CWM if not, just install Clockwork recovery if you have not done so, then boot in clockwork recovery, once you are clockwork recovery, make sure "signature check" is disabled, and install from zip option, point where you put 4.1.2 OTA upgrade file, and then reboot.
I am thinking that error you get most likely signature check since you converted to user app and then converted back to system app.
Click to expand...
Click to collapse
Just tried this with signature verification disabled and still get the error about "assert failed: apply_patch_check yada yada yada PlusOne.apk"
If you replaced the .apk, did you try removing (after backing up) the .odex?
fozzie said:
If you replaced the .apk, did you try removing (after backing up) the .odex?
Click to expand...
Click to collapse
I am not sure where that .odex lives. I did a search in system and its sub directories and didn't find one for google +.
rootbrain said:
If you have removed any system apps the upgrade will fail.
Download this and flash from custom recovery
URL ABOVE
Rootbrain
Click to expand...
Click to collapse
This worked!!! I downloaded the version with the code removed to check files that had been failing me on google +. Thank you very much!
I had the same issue and just like zdeno888 got it solved by the right package... on the url above INSIDE one of the messages there's a modified version without verification scripting.
THIS IS NOT THE VERSION POSTED ON THE FIRST POST!
i am running stock but rooted and unlocked. when i did the unlock or root it installed a basic version on cwm, i think a custom one someone had created for the nexus 7.
i cannot get this sorted. first i managed to get the ota by clearing the google framework data a few times until it offered but it the failed to install saying something about 'failed to verify whole-file signature'
due to this i downloaded the zip i found on, i think, androidpolice and booted to recovery. that failure said something like 'assert failed:apply-patch-check gmail.apk'
i then found on this thread -
rootbrain said:
If you have removed any system apps the upgrade will fail.
Download this and flash from custom recovery
http://androidforums.com/nexus-7-all-things-root/630284-4-1-2-update-rooted-users.html
Rootbrain
Click to expand...
Click to collapse
but this also came back with a failure, i think it was the gmail one mentioned above.
marc.knuckle said:
i am running stock but rooted and unlocked. when i did the unlock or root it installed a basic version on cwm, i think a custom one someone had created for the nexus 7.
i cannot get this sorted. first i managed to get the ota by clearing the google framework data a few times until it offered but it the failed to install saying something about 'failed to verify whole-file signature'
due to this i downloaded the zip i found on, i think, androidpolice and booted to recovery. that failure said something like 'assert failed:apply-patch-check gmail.apk'
i then found on this thread -
but this also came back with a failure, i think it was the gmail one mentioned above.
Click to expand...
Click to collapse
The OP from that thread took down the link, the only one in his post is now the same zip you already had.
This is the file with checks disabled.
https://www.dropbox.com/s/isqpvb0w26kqjdx/4.1.2edited.zip
Use with caution tho, only flash this is stock rom and kernel.
great, that sorted it so thanks very much.
i presume you have done the update, apart from the rotation are you finding much difference?
Little to none
Most changes in this one were under the hood, as they say.

Installing kernel problem

I'm having problems installing any of the franco kernel through twrp 2.6 the latest twrp anyways when I install the zip file it fails. I'm running 9/4 pac also though i don't think that would have anything to do with it failing i tried the 182 and 178 i believe also the jj ones to any help thanks. Oh also i saw the iso files i believe but thought they had to be zipped to install through recovery so maybe that way would work however you install them with the iso thanks again
spriteboost said:
I'm having problems installing any of the franco kernel through twrp 2.6 the latest twrp anyways when I install the zip file it fails. I'm running 9/4 pac also though i don't think that would have anything to do with it failing i tried the 182 and 178 i believe also the jj ones to any help thanks. Oh also i saw the iso files i believe but thought they had to be zipped to install through recovery so maybe that way would work however you install them with the iso thanks again
Click to expand...
Click to collapse
iso files.. for a kernel? what did you actually download? its not a kernel for sure.
simms22 said:
iso files.. for a kernel? what did you actually download? its not a kernel for sure.
Click to expand...
Click to collapse
sorry not iso. I didn't download the img file and meant img file. I only downloaded the zip file from http://forum.xda-developers.com/showthread.php?t=2002782 I first thought it was my recovery was out of date so updated twrp which got me nothing and took forever because goomanager didn't do it so had to use nexus root tool kitv1.7.2 finally got that updated and still the zip file fails also tried the lte zip from http://forum.xda-developers.com/showthread.php?t=2358931 to have lte when and if it ever rolls out in my area but that ones not important plus i think pac's rom has it automatically in it because when i dialed *#*#4636#*#* lte is an option.
Anyways the problems with the zip file when i install it or try to that is it fails with 182 the jj file to and the 178 and jj file don't know what i'm doing wrong and it my mistake again img not iso.
spriteboost said:
sorry not iso. I didn't download the img file and meant img file. I only downloaded the zip file from http://forum.xda-developers.com/showthread.php?t=2002782 I first thought it was my recovery was out of date so updated twrp which got me nothing and took forever because goomanager didn't do it so had to use nexus root tool kitv1.7.2 finally got that updated and still the zip file fails also tried the lte zip from http://forum.xda-developers.com/showthread.php?t=2358931 to have lte when and if it ever rolls out in my area but that ones not important plus i think pac's rom has it automatically in it because when i dialed *#*#4636#*#* lte is an option.
Anyways the problems with the zip file when i install it or try to that is it fails with 182 the jj file to and the 178 and jj file don't know what i'm doing wrong and it my mistake again img not iso.
Click to expand...
Click to collapse
you cant flash img files via recovery.. you either flash it via fastboot or through apps that flash it via fasrboot/terminal for you.
simms22 said:
you cant flash img files via recovery.. you either flash it via fastboot or through apps that flash it via fasrboot/terminal for you.
Click to expand...
Click to collapse
Thanks tried flashing the img file with franco's kernel updater and got a bootloop idk why this is impossible for my phone right now my kernels 3.4.0-perf-g0b3e615 do i have to uninstall it first somehow?
also when i try installing it through twrp it says zip verification fail :-\
spriteboost said:
Thanks tried flashing the img file with franco's kernel updater and got a bootloop idk why this is impossible for my phone right now my kernels 3.4.0-perf-g0b3e615 do i have to uninstall it first somehow?
also when i try installing it through twrp it says zip verification fail :-\
Click to expand...
Click to collapse
I have the same issue with my nexus 4. Installed jelly bam, then had to update tarp to 2.6, yet it still won't flash any version of Franco kernel. Yes they are zip files and from the Dev directly. It gives me zip verification failed so I toggled verify zip signature and it said success. I wipe cache again and reboot. Now I am stuck with with the white Google logo. So I just reinstall jelly bam to get back to a working kernel. I have yet to flash cm to see if a different recovery works, or if it's a problem with the kernel or even jelly bam
SOLVED
I changed the recovery from twrp to cwm and then flashed it. cwm said it worked, but when i wiped cache and rebooted, im still stuck on the white google logo. Looking at your kernel, im assuming you too have jelly bam installed.
It seems you have to manually install it. Download the img file you want off here (use jss versions if you are on jellybam 10.2+)
go to fastboot mode
fastboot flash boot kernel_name.img
this seems to have worked for me. why it has to be this way; i have no idea.
why do you wipe cache? try without wiping!
Gesendet von meinem Nexus 4 mit Tapatalk 4
Its just a habit. Can that actually be the issue? Also I did not check, but maybe the reason it said "success" was because file signature verification was off. Twrp said it worked when I turned it off, so that could be why cwm said successful too
Sent from my Nexus 4 using XDA Premium 4 mobile app

help pls. n7 stuck at boot anim after 4.4 kitkat OTA upd.does not start

Hello mates,
this morning my nexus 7-wifi (unlocked bot not rooted. w/ CWM) said me there is a system update for new android os. Kitkat.
Then i install the update without getting any CWM backup.
Zip file started to be installed in CWM and it processed all install. steps successfully.
However when the progress bar reach to %100, it said something like "...status 7.... installation aborted" (do not remember clearly).
And after reboot i come across a new boot animation (kitkat's new animation i think) which does not end up to a system start or an error message.
Now,
what should i do to complete installation of kitkat?
Thanks in advance.
cozgun said:
Hello mates,
this morning my nexus 7-wifi (unlocked bot not rooted. w/ CWM) said me there is a system update for new android os. Kitkat.
Then i install the update without getting any CWM backup.
Zip file started to be installed in CWM and it processed all install. steps successfully.
However when the progress bar reach to %100, it said something like "...status 7.... installation aborted" (do not remember clearly).
And after reboot i come across a new boot animation (kitkat's new animation i think) which does not end up to a system start or an error message.
Now,
what should i do to complete installation of kitkat?
Thanks in advance.
Click to expand...
Click to collapse
OTA Update cannot be flashed using CWM,you will need to use stock recovery.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Ben Ling said:
OTA Update cannot be flashed using CWM,you will need to use stock recovery.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi Ben,
what should i do now ? i downloaded a file of 360 MB into my PC, should i flash this file?
or
can i flash the file (~180 MB) which my nexus downloaded over wi-fi? if i am capable of using this file, in which directory should i look for this file ?
Thanks in advance.
cozgun said:
Hi Ben,
what should i do now ? i downloaded a file of 360 MB into my PC, should i flash this file?
or
can i flash the file (~180 MB) which my nexus downloaded over wi-fi? if i am capable of using this file, in which directory should i look for this file ?
Thanks in advance.
Click to expand...
Click to collapse
What file have you downloaded ?
Ben Ling said:
What file have you downloaded ?
Click to expand...
Click to collapse
tgz file of android 4.4 for nexus 7 2012 wifi. nakasig-krt16s
cozgun said:
tgz file of android 4.4 for nexus 7 2012 wifi. nakasig-krt16s
Click to expand...
Click to collapse
you downloaded the factory image ?
yes Ben, the factory image.
Ben,
by the way i cannot open stock recovery. when i push power + v.down, n7 opening in CWM. it will be great if you can help on this as well.
Ben,
by the way i cannot open stock recovery. when i push power + v.down, n7 opening in CWM. it will be great if you can help on this as well.
I did the same
cozgun said:
Ben,
by the way i cannot open stock recovery. when i push power + v.down, n7 opening in CWM. it will be great if you can help on this as well.
Click to expand...
Click to collapse
I did the same exact thing that you did and experienced the same error. Luckily, I came across a stickied thread, ""Flashing a factory image with fastboot / return to stock" and followed the instructions EXACTLY and.. it worked! It took me back to 4.3 which was great because at lease tablet was working again! (I had tried everything else I could think of!) What was funny was that within 2 minutes of the tablet up and running again I received the OTA push for 4.4!
I would strongly suggest following the instructions posted in the thread I mentioned above as they worked perfectly.
Boeing787Guy said:
I did the same exact thing that you did and experienced the same error. Luckily, I came across a stickied thread, ""Flashing a factory image with fastboot / return to stock" and followed the instructions EXACTLY and.. it worked! It took me back to 4.3 which was great because at lease tablet was working again! (I had tried everything else I could think of!) What was funny was that within 2 minutes of the tablet up and running again I received the OTA push for 4.4!
I would strongly suggest following the instructions posted in the thread I mentioned above as they worked perfectly.
Click to expand...
Click to collapse
Hello buddy,
thank you for the feedback. But i do not want to lose my data in the tablet. So, first i will try to fix this without wiping data.
Currently i install adb files to my pc.
And i managed to find the zip file i need to upgrade from 4.3 to 4.4 without losing any data.
If i can flash this zip file via adb i will be ok. but i cannot flash it via adb, because of the recovery i am using (i think ). With CWM i could not do that. after adb sideload **********.zip command, it says "error: device not found"
now i am looking for a solution to this error.
But if i could have had my tablet open in stock recovery, it might already be solved.
PROBLEM SOLVED.
HERE IS THE STEPS TAKEN:
DOWNLOAD OTA FILE FROM 4.3 TO 4.4 (NOT FACTORY IMAGE).
DOWNLOAD LATEST SDK, RUN SETUP.
PUT THE OTA FILE IN sdk\platform-tools DIRECTORY.
SIDELOADING THE OTAFILE:
http://www.droid-life.com/2013/02/1...date-a-nexus-without-root-or-custom-recovery/
IF YOUR DEVICE IS NOT RECOGNIZED DURING SIDELOADING CHECK THIS:
http://blog.dantup.com/2012/10/fixing-adb-device-not-found-with-nexus-7-in-recovery-mode/
AFTER SIDELOADING, IF YOU GET STATUS 7 ERROR, TRY THIS:
http://forum.xda-developers.com/showpost.php?p=47474021&postcount=26&nocache=1&z=7376160805579275
NO DATA LOST IN THIS METHOD.
cozgun said:
PROBLEM SOLVED.
HERE IS THE STEPS TAKEN:
DOWNLOAD OTA FILE FROM 4.3 TO 4.4 (NOT FACTORY IMAGE).
DOWNLOAD LATEST SDK, RUN SETUP.
PUT THE OTA FILE IN sdk\platform-tools DIRECTORY.
SIDELOADING THE OTAFILE:
http://www.droid-life.com/2013/02/1...date-a-nexus-without-root-or-custom-recovery/
IF YOUR DEVICE IS NOT RECOGNIZED DURING SIDELOADING CHECK THIS:
http://blog.dantup.com/2012/10/fixing-adb-device-not-found-with-nexus-7-in-recovery-mode/
AFTER SIDELOADING, IF YOU GET STATUS 7 ERROR, TRY THIS:
http://forum.xda-developers.com/showpost.php?p=47474021&postcount=26&nocache=1&z=7376160805579275
NO DATA LOST IN THIS METHOD.
Click to expand...
Click to collapse
i try to do that
but when i trying to adb sideload ...zip says error:closed
its maybe im on twrp?
what can i do
plz help me im stuck in bootloop too
plz
pediashkavar buddy,
I am sorry, i have never used twrp.
cozgun said:
PROBLEM SOLVED.
HERE IS THE STEPS TAKEN:
DOWNLOAD OTA FILE FROM 4.3 TO 4.4 (NOT FACTORY IMAGE).
DOWNLOAD LATEST SDK, RUN SETUP.
PUT THE OTA FILE IN sdk\platform-tools DIRECTORY.
SIDELOADING THE OTAFILE:
http://www.droid-life.com/2013/02/1...date-a-nexus-without-root-or-custom-recovery/
IF YOUR DEVICE IS NOT RECOGNIZED DURING SIDELOADING CHECK THIS:
http://blog.dantup.com/2012/10/fixing-adb-device-not-found-with-nexus-7-in-recovery-mode/
AFTER SIDELOADING, IF YOU GET STATUS 7 ERROR, TRY THIS:
http://forum.xda-developers.com/showpost.php?p=47474021&postcount=26&nocache=1&z=7376160805579275
NO DATA LOST IN THIS METHOD.
Click to expand...
Click to collapse
Does this work on a rooted nexus?
Only reason I'm asking is cause the sideloading link states "..to update nexus without root..."

Upgrade to TWRP 2.8

I'm trying to upgrade to the latest twrp but can't seem to flash it.
I've downloaded the .zip but when ibflash with current twrp 2.7.0 it tells me it can't open the zip?
I've also tried flashing with flashify to no avail? Any help?
Valiceemo said:
I'm trying to upgrade to the latest twrp but can't seem to flash it.
I've downloaded the .zip but when ibflash with current twrp 2.7.0 it tells me it can't open the zip?
I've also tried flashing with flashify to no avail? Any help?
Click to expand...
Click to collapse
i would redownload the zip and check that the file size is correct. if it's a corrupted download it wont flash. happened to me several times.
kbkang said:
i would redownload the zip and check that the file size is correct. if it's a corrupted download it wont flash. happened to me several times.
Click to expand...
Click to collapse
Thanks. Got it done now. Must have been a dodgy download. Took several attempts to get it too D/L properly.
Thanks
Valiceemo said:
Thanks. Got it done now. Must have been a dodgy download. Took several attempts to get it too D/L properly.
Thanks
Click to expand...
Click to collapse
while i was testing stuff i found....
from 4.2.2 using different way (some tool) to get recovery (not autorec) i could update to official twrp 2.8.x.x.
using 4.4.2 using autorec cant update to official twrp 2.8.x.x.
but can update to the custom 2.8.x.x availabe here with f2fs version.

New OTA break root?

Just got a notification for OTA to 5.0.1. Anyone know if this will break root? And if it will install with CWM custom recovery?
Hello, I tried to install in my WiFi model and rooted and I got and error during the installation, so I'm waiting for the opinion of other users. ?
Sent from my SHIELD Tablet using XDA Free mobile app
I kiddy got it too, I'll wait for the zip file lol.
Ya think it is really better to install from the zip file?
Sent from my SHIELD Tablet using XDA Free mobile app
I'll be the guinea pig
I downloaded the OTA but can't find where is the ota file. Any idea where is it?
Sent from my SHIELD Tablet using XDA Free mobile app
Get an error in cwm . shucks
Does someone can post change log please?
Gilbot said:
Get an error in cwm . shucks
Click to expand...
Click to collapse
Same. My bootloader is locked and tried flashing via cwm and got error. Pls teach me how to update?
Sent from my SHIELD Tablet using XDA Free mobile app
Judge584 said:
Does someone can post change log please?
Click to expand...
Click to collapse
Android Central has the log change. It's bug fixes really.
Also, in this thread a user states that apparently only with the full 5.0.1 can you install it with CWM.
http://forum.xda-developers.com/shi...p-nvidia-shield-tablet-ota-android-5-t2982677
You will lose root and CWM after the reboot but those took about 3 minutes to get back .. easy peasy. I'm now at 5.0.1 on my shield with root and CWM.
Cheers.
Hello aegern,
deletes the full update all the data? can you give me the recovery and root attach files?
Thanks
Gilbot said:
Get an error in cwm . shucks
Click to expand...
Click to collapse
This should help. Let me know if it works:
http://forum.xda-developers.com/shield-tablet/general/5-0-1-ota-rooted-shield-tablets-dl-t2983104
d4m45cuz said:
This should help. Let me know if it works:
http://forum.xda-developers.com/shield-tablet/general/5-0-1-ota-rooted-shield-tablets-dl-t2983104
Click to expand...
Click to collapse
:crying: Does not work for me. I tried locking it again, unrooting my tablet and neither with OTA or CWM flash. Any light?
GMrMadrigal said:
:crying: Does not work for me. I tried locking it again, unrooting my tablet and neither with OTA or CWM flash. Any light?
Click to expand...
Click to collapse
So here's what I did:
Download the full OTA then reboot to CWM (assuming your rooted + recovery) and unmount system partition ( I believe all others were unmounted) and then delete system, data, cache partitions respectively. Then flash the OTA zip followed by latest supersu.
Just tested this method and I have a rooted 5.01 32GB LTE US model working flawlessly. Even managed to take out the top spot in Hwbot Prime for the Shield (woops to newb for links I see lol)
l0ud_sil3nc3 said:
So here's what I did:
Download the full OTA then reboot to CWM (assuming your rooted + recovery) and unmount system partition ( I believe all others were unmounted) and then delete system, data, cache partitions respectively. Then flash the OTA zip followed by latest supersu.
Just tested this method and I have a rooted 5.01 32GB LTE US model working flawlessly. Even managed to take out the top spot in Hwbot Prime for the Shield (woops to newb for links I see lol)
Click to expand...
Click to collapse
I really appreciate your advice but I get the same error
-- Installing: /storage/sdacrd1/lte-full-5.0.1.zip
Finding update package...
Opening update package...
Installing update...
This package is for "shieldtablet" device; this is a "ardbeg".
E:Error in /storage/sdacrd1/lte-full-5.0.1.zip
(Status 7)
Installation aborted.
I've tried with a few zip updates through in xda but nothing. I guess is because the CWM recovery image but Im not an expert on this and cant be sure if flashing the stock recovery will let me make the OTA successfully. But neither i have found the stock recovery image
GMrMadrigal said:
:crying: Does not work for me. I tried locking it again, unrooting my tablet and neither with OTA or CWM flash. Any light?
Click to expand...
Click to collapse
GMrMadrigal said:
I really appreciate your advice but I get the same error
-- Installing: /storage/sdacrd1/lte-full-5.0.1.zip
Finding update package...
Opening update package...
Installing update...
This package is for "shieldtablet" device; this is a "ardbeg".
E:Error in /storage/sdacrd1/lte-full-5.0.1.zip
(Status 7)
Installation aborted.
I've tried with a few zip updates through in xda but nothing. I guess is because the CWM recovery image but Im not an expert on this and cant be sure if flashing the stock recovery will let me make the OTA successfully. But neither i have found the stock recovery image
Click to expand...
Click to collapse
Look in this thread: [.zip] Nvidia Shield Tablet OTA Android 5.0.1, first page posted by user SeVIIn.
Use that zip file, no issues with it.
l0ud_sil3nc3 said:
Look in this thread: [.zip] Nvidia Shield Tablet OTA Android 5.0.1, first page posted by user SeVIIn.
Use that zip file, no issues with it.
Click to expand...
Click to collapse
Nice, I'm going to download it, and I'll tell if it work! :fingers-crossed:
GMrMadrigal said:
Nice, I'm going to download it, and I'll tell if it work! :fingers-crossed:
Click to expand...
Click to collapse
So, did it work for you? I've tried the file in both this link and the official update and get the same thing with both. I'm still on KK and I can't install either the 5.0 or the 5.01 updates. I get the same "this is an ardbeg" error with any update I try to flash, and I'm flashing the full files, not the incremental updates. In fact, I have two tablets (both lte) and I updated the first one to 5.0 a week ago, no problem, but the new one I just bought, I can't even though I'm using the same files (cwm and update). I'm stumped.
Bah. nm. I went back and reinstalled the recovery from here again, http://forum.xda-developers.com/shi.../recovery-cwm-recovery-nvidia-shield-t2848064. Flashed 5.01 just fine. Not sure where I got the other recovery.
dgjenkins said:
So, did it work for you? I've tried the file in both this link and the official update and get the same thing with both. I'm still on KK and I can't install either the 5.0 or the 5.01 updates. I get the same "this is an ardbeg" error with any update I try to flash, and I'm flashing the full files, not the incremental updates. In fact, I have two tablets (both lte) and I updated the first one to 5.0 a week ago, no problem, but the new one I just bought, I can't even though I'm using the same files (cwm and update). I'm stumped.
Bah. nm. I went back and reinstalled the recovery from here again, http://forum.xda-developers.com/shi.../recovery-cwm-recovery-nvidia-shield-t2848064. Flashed 5.01 just fine. Not sure where I got the other recovery.
Click to expand...
Click to collapse
Hi dgjenkins, sorry answer so late. So, answering you first, not, it did not work for me. I actually did give up, the bad was that I tried so many ways to do it that I freezed the tablet and did not start again. Well, looking out there, I found this amazing video who saved my tablet of bust it again the wall and start from the original firmware.
https://www.youtube.com/watch?v=GsMo1tPlIFU
I did intal the Minimal ADB and Fastboot
Copy the image files in to the Minimal ADB and Fasboot directory c:\Programs Files (x86)\Minimal ADB and Fastboot
Ope Minimal ADB and Fastboot
-Type: fastboot flash recovery recovery.img
-Type: fastboot flash boot boot.img
-Type: fastboot flash system system.img
-Type: fastboot flash userdata userdata.img
-Type: fastboot flash staging blob
-Type: fastboot flash dtb tegra124-tn8-p1761-1270-a04-e-battery.dtb
And done . I can now install the updates from the stock firmware. Maybe I will root it again once a stable way to root the shield tablet appear out there. :cyclops:
Happy Holidays and Thanks for the interest! :good:
Nvidia updates definitely trump Android ones. These days, Google is in the habit of pretending that a nexus 5 camera bug is worthy of a new Android version (that was KitKat) or that an update is a great place to break functionality (App Ops, also with KitKat). Anything that's not a minor version with updates you know you want... Avoid on a non Nexus unless you have a great reason for it.
Manufacturers besides Google, see, they do this thing I like to call quality control. They generally release an OS that is ready for the hardware and software*. Crazy, right?
* unless that hardware is, say, the pen

Categories

Resources