Related
im not a pro at electronics but isnt it possible to solder a charging plug to a usb cable?
to achieve usb charging?
did it for a homemade IR headtracking unit
SmokeMasta said:
im not a pro at electronics but isnt it possible to solder a charging plug to a usb cable?
to achieve usb charging?
did it for a IR headtracking unit
Click to expand...
Click to collapse
I still don't think people understand. This devices needs more output then a usb plug can produce. Think about it this way, would you charge your laptop computer off your desktop usb port? The XOOM requires a 12v charge, just like your laptop.
bwcorvus said:
I still don't think people understand. This devices needs more output then a usb plug can produce. Think about it this way, would you charge your laptop computer off your desktop usb port? The XOOM requires a 12v charge, just like your laptop.
Click to expand...
Click to collapse
wont it be able to trickle charge... when in a pinch some charge is better then none at all
What don't people understand about this. A USB plug in a computer might only be able to produce 500ma, but you can plug that SAME USB cable into a wall charger that uses USB and it will charge fast as hell. The iPad does this. All Android phones do this. It makes it so you only have to carry one cable and maybe a small wall plug.
deleted this
bwcorvus said:
The usb port is not connected to the battery for charging anyway.
https://motorola-global-portal.cust...sion/L3RpbWUvMTI5ODgyOTM5NS9zaWQvdnpSbGhIbms=
Click to expand...
Click to collapse
guess you missed prev poster point ... if you solder on a charging plug it doesnt mean you need to remove the other plug have 2 plugs on one side
SmokeMasta said:
guess you missed prev poster point ... if you solder on a charging plug it doesnt mean you need to remove the other plug have 2 plugs on one side
Click to expand...
Click to collapse
You are right i miss read it
after some reading usb 3.0 delivers 900ma
and it looks those usb charger blocks deliver upto 9w at 1.8a
It is hard to say if it will work. Since I don't have my Xoom yet, I can looking at the output rating of the wall charger. Maybe someone can look at their wall charger and see how much output voltage and current it produces. If it's higher than 5V, the USB might not be able to charge it. If it could charge it, it would be better to have a USB cable that has one end split into two connectors, one with the circular connector, and one with the micro USB end.
ggoldfingerd said:
It is hard to say if it will work. Since I don't have my Xoom yet, I can looking at the output rating of the wall charger. Maybe someone can look at their wall charger and see how much output voltage and current it produces. If it's higher than 5V, the USB might not be able to charge it. If it could charge it, it would be better to have a USB cable that has one end split into two connectors, one with the circular connector, and one with the micro USB end.
Click to expand...
Click to collapse
Here you go.
looks like my usb 1.0 charger (from htc (ancient thing)) delivers 5v at 1amp
wondering if newer chargers deliver more. spec sheet of USB 3.0 says it can deliver 9 volt at 1.8 amp
hopefully the EU classifies the moto tablet as a telephone then its obligated by law to have usb charging ability
The iPad charger delivers 5v at 2 amps over a USB to 30pin cable.
bwcorvus said:
Here you go.
Click to expand...
Click to collapse
Thanks. I just decided to glance at the Xoom teardown. From what I saw with the hardware, I don't think it will be possible to use USB to charge it. The battery alone is 7.4V, so there is no way to charge it with 5V unless the Xoom had a DC step-up convert. The teardown only lists a step-down converter which probably steps the battery voltage down for all of the components in the Xoom and has nothing to do with battery charging.
ggoldfingerd said:
Thanks. I just decided to glance at the Xoom teardown. From what I saw with the hardware, I don't think it will be possible to use USB to charge it. The battery alone is 7.4V, so there is no way to charge it with 5V unless the Xoom had a DC step-up convert. The teardown only lists a step-down converter which probably steps the battery voltage down for all of the components in the Xoom and has nothing to do with battery charging.
Click to expand...
Click to collapse
Does it require the same voltage to do a trickle charge? From the research XDA members have done so far, the Xoom charger requires 1.5A, USB puts out .5A, that's not too far off if we just want trickle charging.
The battery is 7.4V but 5V isn't too far off either.
Does the market app SPARE PARTS work on the Xoom, or some other charging monitor app?
Maybe someone who already has the Xoom and knows how to solder can frankenstein a USB charging adapter? Make one end fit into the charging port of the Xoom and the other end fit into a standard micro USB plug.
This way, you carry your normal USB cable for data transfer but if you need to charge, then you plug the USB plug into the adapter which plugs into the charging port.
BTW, can someone please clarify that the charging port IS THE ONLY WAY to charge the Xoom? Someone said on here that the docking device has a USB plug that will charge the Xoom thru the USB?
Neo3D said:
Does it require the same voltage to do a trickle charge? From the research XDA members have done so far, the Xoom charger requires 1.5A, USB puts out .5A, that's not too far off if we just want trickle charging.
The battery is 7.4V but 5V isn't too far off either.
Does the market app SPARE PARTS work on the Xoom, or some other charging monitor app?
Maybe someone who already has the Xoom and knows how to solder can frankenstein a USB charging adapter? Make one end fit into the charging port of the Xoom and the other end fit into a standard micro USB plug.
This way, you carry your normal USB cable for data transfer but if you need to charge, then you plug the USB plug into the adapter which plugs into the charging port.
BTW, can someone please clarify that the charging port IS THE ONLY WAY to charge the Xoom? Someone said on here that the docking device has a USB plug that will charge the Xoom thru the USB?
Click to expand...
Click to collapse
Spare parts works fine, so does battery monitor widget. The dock uses the 2 metal pins between the hdmi and charging hole.
My HTC charger outputs from the AC adapter to microusb at 5V and 1.0A, which is as high as I've seen with other phones and chargers.
The Xoom charger appears to output 12V at 1.5A.
I'm no electrician but that does seem like a pretty big difference. 140% greater in and 50% greater respectively.
A lot of armchair electrical engineers in here. Tell me, what would you gain from creating your own proprietary usb charger? You'd still have only one of them and you couldn't use it on anything else.
Has anyone stopped to think that it's very highly likely that the usb charging pins aren't hooked up at all inside the xoom?
This forum is the biggest group of whiny people I've ever encountered, and I once accidentally walked into a GoP fundraiser.
Neo3D said:
Does it require the same voltage to do a trickle charge? From the research XDA members have done so far, the Xoom charger requires 1.5A, USB puts out .5A, that's not too far off if we just want trickle charging.
The battery is 7.4V but 5V isn't too far off either.
Does the market app SPARE PARTS work on the Xoom, or some other charging monitor app?
Maybe someone who already has the Xoom and knows how to solder can frankenstein a USB charging adapter? Make one end fit into the charging port of the Xoom and the other end fit into a standard micro USB plug.
This way, you carry your normal USB cable for data transfer but if you need to charge, then you plug the USB plug into the adapter which plugs into the charging port.
BTW, can someone please clarify that the charging port IS THE ONLY WAY to charge the Xoom? Someone said on here that the docking device has a USB plug that will charge the Xoom thru the USB?
Click to expand...
Click to collapse
Well the current rating is only part of the equation. Think of the voltage as the pushing force for the current. The Xoom has two Li-Po packs (two batteries) with a nominal voltage of 7.4V. It really depends on the battery, but in general for Li-Po's, the minimum voltage for this battery will be something close to 6V. Li-Po's require specific ways of charge with min/max voltages and certain currents. The minimum battery voltage cannot be overcome by the 5V from USB, thus it will not charge the battery.
If anything, the 5V could power the device, but it wouldn't charge the battery. I would bet that this doesn't work. The power jack on the Xoom probably goes into a regulator that reduces the 12V into a lower voltage that charges the Xoom.
gbenj said:
My HTC charger outputs from the AC adapter to microusb at 5V and 1.0A, which is as high as I've seen with other phones and chargers.
The Xoom charger appears to output 12V at 1.5A.
I'm no electrician but that does seem like a pretty big difference. 140% greater in and 50% greater respectively.
Click to expand...
Click to collapse
I don't see how you see it as whining, we're just figuring out how to get things we want ourselves instead of waiting for the manufacturer to do it for us
Most of XDA's reader probably have some kind of techincal/engineering/IT/industrial background. Nothing wrong with pooling our talents to solve manufacturers' shortcomings.
USB Charging
Just tried to charge it VIA USB and wall charger with USB port & this is the result.
Well, I'll need to ask this question: do any of you guys know if Acer is going to bless us with a USB to proprietary connector for our Iconias?
Look, I've accepted the length of the power cord. One, it is what it is and two I can always go and buy an after market adapter which could be longer. Fine. What is unforgivable, to me, is that I need an AC plug and I can't use the myriad (at least three) AC to USB plugs that I have to charge my unit. Heck, I can even use my wife's iPad adapter to charge my EVO in a pinch.
It can be done as I assume that the docking station Acer sells can charge the unit. Besides if Sammy, Toshiba and Asus have similar things why can't Acer? If they come up with something like this they'll (to me) boost the value of my Iconia a bit: I can use USB and the other adapter to charge it.
C'mon Acer: get in gear!
I'm not 100% sure I understand the question, but I'll take a stab anyway.
It is impossible to charge through USB to the A500, either through the USB ports or the dock connector. USB only has a 5v signal on it, and I believe it's max current capacity is 500ma (per standard), whereas the A500 needs 12v and 1.5a of current.
Does that help?
USB 2.0 standard allows maximum output of 1.5 amperes, or 1.8 amps on a dedicated charge port with a special cable (e.g. cannot carry data but can only charge, I have never seen one by the way) at 5 volts. These 1.5 and 1.8 amps are for USB chargers by the way, computer USB 2 ports are all rated to a max. of 0.5 amps.
A500 needs 1.5 amps at 12 volts, which is roughly 2 times more current than the usb standard (Watts = Voltage x Amps), e.g. acer power brick supplies 18 watts vs a dedicated USB charger can only supply 9 watts at 1.5 amps. Most of the phone chargers that use USB cables are around 1 amp, making their max. output 5 watts vs 18 that acer needs.
In summary, it is not possible to charge A500 via USB.
No, no, no....
I think I explained myself poorly.
You guys know that the on the bottom of the Iconia there's a connector; a proprietary connector. I assume that the unit can be recharged through there. So what I was saying is that there should be a cable that ends in that proprietary connector on one side, and on the other on a standard USB connector so that it can be charged. Very much like the iPad or the Samsung Galaxy.
I should have mentioned the word 'proprietary'
citizenklaw said:
I think I explained myself poorly.
You guys know that the on the bottom of the Iconia there's a connector; a proprietary connector. I assume that the unit can be recharged through there. So what I was saying is that there should be a cable that ends in that proprietary connector on one side, and on the other on a standard USB connector so that it can be charged. Very much like the iPad or the Samsung Galaxy.
I should have mentioned the word 'proprietary'
Click to expand...
Click to collapse
If I had read your original post carefully I would have noticed that
That would work if they made a 5 volt, 4 amp charger with removable usb cable on the charger end as you suggested, and we would be able to use that charger for everything else as well.
Well...
I'm keeping my fingers crossed.
Not to rain on your wishing parade, but it wouldn't work, even with the dock connector adapter. The batteries in these tablets are 7.3 volt Li-Po packs(I think thats the voltage at least) so they require at least 9 volts to charge them. Thats why the docks that Acer makes for these use the same power supply as the tablets themselves. Without high enough voltage, it wouldn't charge. I guess you could make a charger that would plug into the connector on the bottom, but you would end up having to use the same old power supply to get it to do anything. Conceivably you could make a double USB plug on the other end wired in series, that would bump it to 10 volts/500 ma and it would work as a trickle charger of sorts.
I tried swapping out the USB cable that came with my nexus 7 with a longer usb cable (still using the same charger though edit: by that, i mean the ASUS charger that came with the N7). It doesn't seem to be charging though, even though it says 'charging' on the screen. When i was using the nexus 7 while plugged in, i actually lost 1% charge after using it for like 30 or so minutes.
I think i grabbed this cable off Ebay. It had no trouble charging my phone. Are there different grades of USB cables or something?
By same charger do you mean the one it came with? The 2 amps charger. Sorry I had to clear that bit up. I think longer cables creates more resistence but I'm not sure if the cable length is significant enough stop charging. I have no idea about grades of USB cables though maybe someone can elaborate on that.
Summerfly said:
By same charger do you mean the one it came with? The 2 amps charger. Sorry I had to clear that bit up. I think longer cables creates more resistence but I'm not sure if the cable length is significant enough stop charging. I have no idea about grades of USB cables though maybe someone can elaborate on that.
Click to expand...
Click to collapse
Yes, the ASUS charger it came with, i plugged in the 6 foot microusb cable i bought off ebay into it.
MFister said:
Yes, the ASUS charger it came with, i plugged in the 6 foot microusb cable i bought off ebay into it.
Click to expand...
Click to collapse
Okay, 6 foot cable doesn't sound excessively long. I have to ask what were you doing on it while charging and what brightness setting was the screen at. Maybe you were draining more power than the charger can provide?
This is pretty common. The stock cable has larger conductors, as I assume other 2 amp chargers come with, and standard cables are sensed somehow and charging current is limited. Try finding a 22awg cable, I think it will work.
I use a USB extender since I don't have any outlets near my bed. I use a cable rated for USB 2.0 and haven't had any problems. I have had problems with cables that aren't. The Motorola USB cables are rated for 2.0 and they all work fine for me with no problems.
burpootus said:
This is pretty common. The stock cable has larger conductors, as I assume other 2 amp chargers come with, and standard cables are sensed somehow and charging current is limited. Try finding a 22awg cable, I think it will work.
Click to expand...
Click to collapse
Thanks, i assume this cable that's 28/24 awg would work?
http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=8643&seq=1&format=2
I use a cable extender, but I insert the original stock cable into the tablet (not the charger). It appears to recognise that and charge at the correct rate.
I've tried using a usb extender to charge with the asus charger and the Asus USB cable and checking with battery graph it charges much slower compared to using just the Asus cable.
People with eyesight better than mine will see that the micro USB socket has 5 pins and the Nexus looks at the 5th pin to decide what is connected and what the connected device is allowed to do. The pin can be grounded, not connected (floating) or can be connected to ground via I think 3 fixed resistances. Google for USB on the go. I think that is the standard adopted by Asus and the cable doesn't comply.
I'm using a nook 1/2 cable I got with a car charger for the nooktablet
It works and is longer then the stock cable it came with.
Sent from my Nexus 7 using Tapatalk 2
EE here. I just ran into this issue recently, so I'll share what I learned. Grab a multimeter and measure the resistance of the cable. Check all 4 pins just in case one of them is worse than another.
In my case, I had a really horrible USB extension cable. It measured about 4 Ohms. 4 Ohms is low enough for a multimeter to pass a continuity test, but do out the math:
V = I * R
V = 2A * 8 Ohms (4 Ohms on VCC, 4 Ohms back on GND)
V = 16V.
16 volts?? Where does 16V come from? Short answer: It doesn't. If 2A were actually flowing, the USB cable would have a 16V drop across it. It doesn't though, which tells us that 2A is not flowing. 1A is also not flowing, since that would still be 8V.
0.5 Ohms is a good estimate for a MAXIMUM resistance for a USB charging cable. That's a 1V drop at 2A, meaning the phone is only getting ~4V. That explains why the USB cable that comes with the Nexus 7 is so darn short - it comes in at around 0.1 Ohms (or perhaps less, that's about the limit of what I can accurately measure)
Wanted to get a longer USB cable that will work the Asus adapter, any links?
Thanks.
came across this thread while investigating a strange thing in charging my 4400mah extended battery of my s3.
I have a 5v 1A stock samsung charger with an extension cable i was always using to charge my old phones with a less capacity battery (mugen 3200mah)
This night i spent i wasnt ble to get a full charge from 5% to 100% in 8 hours and this sounds more than strange, but yet understandable.
i will try timings with the stock cable without extension and i'll come back...
Reading from the AC adapter, this thing can charge at 1.8 amps. I'm doing some research on car chargers that can output 2 amps to the phone via a USB cable, but the trick is getting the phone to pull more than .5 amps from a car accessory outlet. So far I haven't had much luck. There seems to be a lot of info on ipad stuff, but not much in the way of high powered Android devices. So I thought I'd start a thread about compatible car chargers that will allow a full 1.8 amp pull from my car outlet, and see what you guys and gals think and have tried. I've attached a pic of my current setup. It's a Proclip holder on a 2012 Mustang. I've used this same setup for several previous phones (S2 Skyrocket and S3). The holder itself is adjustable to accommodate various phones with cases.
earlthepearl said:
Reading from the AC adapter, this thing can charge at 1.8 amps. I'm doing some research on car chargers that can output 2 amps to the phone via a USB cable, but the trick is getting the phone to pull more than .5 amps from a car accessory outlet. So far I haven't had much luck. There seems to be a lot of info on ipad stuff, but not much in the way of high powered Android devices. So I thought I'd start a thread about compatible car chargers that will allow a full 1.8 amp pull from my car outlet, and see what you guys and gals think and have tried. I've attached a pic of my current setup. It's a Proclip holder on a 2012 Mustang. I've used this same setup for several previous phones (S2 Skyrocket and S3). The holder itself is adjustable to accommodate various phones with cases.
Click to expand...
Click to collapse
Data pins need shorted together, either in the USB cig plug, or some micro USB cables are this way...
Additionally, the USB cable you use needs to have thick enough power wires to support 1.8A charge draw. Many USB cables use 28 AWG wire for the data conductors, and then you get varying degrees of wire gauge for the power conductors depending on manufacturer. Some people use 28 AWG for both, some use 26, and good cables are made with 24 AWG wire. The thicker wire gauge means less resistance so less power is lost and more can be put into the battery. To pull a proper 1.8A the phone probably should have 22AWG power wire in the USB cable really...
earlthepearl said:
Reading from the AC adapter, this thing can charge at 1.8 amps. I'm doing some research on car chargers that can output 2 amps to the phone via a USB cable, but the trick is getting the phone to pull more than .5 amps from a car accessory outlet. So far I haven't had much luck. There seems to be a lot of info on ipad stuff, but not much in the way of high powered Android devices. So I thought I'd start a thread about compatible car chargers that will allow a full 1.8 amp pull from my car outlet, and see what you guys and gals think and have tried. I've attached a pic of my current setup. It's a Proclip holder on a 2012 Mustang. I've used this same setup for several previous phones (S2 Skyrocket and S3). The holder itself is adjustable to accommodate various phones with cases.
Click to expand...
Click to collapse
Hi, not trying to hijack your thread, but can you tell me which case you are using? I like the fact that it has a large lip around the screen.
Thanks
What model pro clip holder is that? I need to replace the one from my nexus. May hold out for the G2 specific one with the cable built in (like the nexus one I have now), but no telling how long that will be.
mikea3000 said:
Hi, not trying to hijack your thread, but can you tell me which case you are using? I like the fact that it has a large lip around the screen.
Click to expand...
Click to collapse
It's the Body Glove case from the AT&T store. It was the only one they had at the time, and I didn't feel like waiting to order one so I overpaid in exchange for some piece of mind.
stetsonaw said:
What model pro clip holder is that? I need to replace the one from my nexus. May hold out for the G2 specific one with the cable built in (like the nexus one I have now), but no telling how long that will be.
Click to expand...
Click to collapse
It's the holder I ordered for my Skyrocket a few years ago. It's a generic adjustable one that fits a lot of different phones with cases. It has fit my SR, GS3, and now my G2, all with cases.
EniGmA1987 said:
Additionally, the USB cable you use needs to have thick enough power wires to support 1.8A charge draw.
Click to expand...
Click to collapse
I have a custom 5 inch up angle micro USB cable I ordered from www.usbfirewire.com. It is a very thick wire, thicker than the charging cable the G2 came with. The one in my pic is probably not thick enough for a 2 amp charge.
Here is an interesting article I came across about car chargers:
The Best USB Car Charger
EniGmA1987 said:
Additionally, the USB cable you use needs to have thick enough power wires to support 1.8A charge draw. Many USB cables use 28 AWG wire for the data conductors, and then you get varying degrees of wire gauge for the power conductors depending on manufacturer. Some people use 28 AWG for both, some use 26, and good cables are made with 24 AWG wire. The thicker wire gauge means less resistance so less power is lost and more can be put into the battery. To pull a proper 1.8A the phone probably should have 22AWG power wire in the USB cable really...
Click to expand...
Click to collapse
Spot on. FWIW, the LG OEM cable is 20AWG on the power wires. This is the only viable explanation as I can't get the OEM wall charger to work with any cables I have sitting around (24AWG at best).
So would we be better off just using the factory charger with a power inverter or is there an actual car charger that will work?
Provided you short the data pins in whatever car charger you buy (if they arent already) and you get a cable with beefy power conductors then you should be able to draw 1.5-1.8A of power through a car charger. You have to make sure the car charger will do what you want though, many 2A chargers also have 2 ports to plug into. What they don't tell you is that each port is limited to 1A and both together will give 2A draw, but not to charge one device. The car itself also may limit power to the charger as well, I know my car specifically says 1.4A max through the cigarette plug. So it is possible to do, it is all just dependent on so many other things that you have to check off the list.
in_dmand said:
So would we be better off just using the factory charger with a power inverter or is there an actual car charger that will work?
Click to expand...
Click to collapse
That's what I'm trying to figure out. I'm tempted to try that Scosche charger, with my thick USB cable. I installed Currentwidget, so I should be ale to see at what rate I'm charging at if I decide to order it.
in_dmand said:
So would we be better off just using the factory charger with a power inverter or is there an actual car charger that will work?
Click to expand...
Click to collapse
I like the Powergen dual 2.1A USB charger I got off of Amazon. Has served me well. But really, anything 1.8A+ that's quality will do. The trick is going to be the USB cable. Still trying to source one from a reputable site, but you want something with 20AWG for the power. If I find something, I'll post it. Thus far I found two sites, kinda obscure, but not thrilled that the shipping alone costs more than the cables which run $6.
---------- Post added at 08:41 PM ---------- Previous post was at 08:39 PM ----------
EniGmA1987 said:
Provided you short the data pins in whatever car charger you buy (if they arent already) and you get a cable with beefy power conductors then you should be able to draw 1.5-1.8A of power through a car charger. You have to make sure the car charger will do what you want though, many 2A chargers also have 2 ports to plug into. What they don't tell you is that each port is limited to 1A and both together will give 2A draw, but not to charge one device. The car itself also may limit power to the charger as well, I know my car specifically says 1.4A max through the cigarette plug. So it is possible to do, it is all just dependent on so many other things that you have to check off the list.
Click to expand...
Click to collapse
I suspect the phone can detect the charger capacity because my OEM LG cable works on both the Apple and Non-Apple ports on the Powergen charger. Since that's the case, the phone doesn't seem to care if the data pins are shorted or not. And the Powergen is advertised as 4.2A total, so 2.1A per port.
kyler13 said:
I like the Powergen dual 2.1A USB charger I got off of Amazon. Has served me well. But really, anything 1.8A+ that's quality will do. The trick is going to be the USB cable. Still trying to source one from a reputable site, but you want something with 20AWG for the power. If I find something, I'll post it. Thus far I found two sites, kinda obscure, but not thrilled that the shipping alone costs more than the cables which run $6.
Click to expand...
Click to collapse
Something worth considering is looking at charging cables labeled for tablets. They usually charge in this amperage range. I plugged my g2 into my kindle fire HD charger (1.8A) and didn't get any slow charge warnings.
Geekybiker said:
Something worth considering is looking at charging cables labeled for tablets. They usually charge in this amperage range. I plugged my g2 into my kindle fire HD charger (1.8A) and didn't get any slow charge warnings.
Click to expand...
Click to collapse
Doesn't that come with the same Amazon branded usb cable you can get by itself? Take a look on the cable. A lot of times they label the wire gauge.
Sent from my VS980 4G using Tapatalk 4
my amazon branded micro usb cables are 28awg and they still allow quick charge with oem wall charger.
The charging issues associated with this phone has been a huge PITA. I've been carrying my stock cable around just so I can charge my phone!!! Subscribed so I can maybe help out with some info...
bova80 said:
my amazon branded micro usb cables are 28awg and they still allow quick charge with oem wall charger.
Click to expand...
Click to collapse
Are you certain that's not just the data side that is 28awg? Very surprised you can pull 1.8A at 28awg.
Sent from my VS980 4G using Tapatalk 4
kyler13 said:
Doesn't that come with the same Amazon branded usb cable you can get by itself? Take a look on the cable. A lot of times they label the wire gauge.
Sent from my VS980 4G using Tapatalk 4
Click to expand...
Click to collapse
They are unmarked.
Whats the deal here? Anyone find any other cables that work? If I use a monoprice premium cable with a 1 amp car charger with bluetooth and music going it won't charge. But if I use the same car charger and use the OEM LG cord that came with the phone the phone charges fine. Same thing in the house plugged in with the stock charger base. Its super slow unless you use the OEM cable.
There is a HUGE thread about this.
I think we've narrowed it down to the AWG thickness of the cable. The Stock Cable is really thick and able to carry the voltage properly. Using another cable with thinner wires, it can't provide enough juice.
But there is a huge thread on this already.
http://forum.xda-developers.com/showthread.php?t=2460881
GTvert90 said:
f I use a monoprice premium cable with a 1 amp car charger with bluetooth and music going it won't charge.
Click to expand...
Click to collapse
The new chargers are 1.8A vs the old 1A charger. Less amperage = Less power, that is why it is slow charging. The width of a cable can limit the amount of amperage passed, so for 1A you can expect a thinner cable.