hello
i just buy me new defy mb525
and i had Registered to this forums specially to get a help with update my phone .
i had watched too many games and app on the web that is my phone cant run it cuz it must be android 4.0 and up
can you help me step by step to do that (i am a beginner at Android world) ...... thanx ^_^
help plz !
meryqat said:
help plz !
Click to expand...
Click to collapse
THIS WILL VOID YOUR WARRANTY!!!!
1. root your defy with super one click
2. install 2ndinit (accept superuser request)
3 chose the android version to install that is(ICS 4.0.3,JB 4.1.2,4.2.2) =go with the latest
4. download the ROM and respective gapps and place it in your sd card
5. make backup of your apps if you want to
START WITH FULL BATTERY CHARGE
6. reboot and press vol down button on blue led blink.
7. your in boot menu>recovery>custom/stable recovery
8. Wipe data / factory reset.
9. Wipe cache partition.
10. go to Advanced>Wipe Dalvik Cache.
11. back
12. Install zip from sdcard>choose ROM.zip>power button>installation will start
13. same way install gapps
14. perform 9&10 again
15. reboot (first boot takes some time)
hope i helped you
abhirulz94 said:
THIS WILL VOID YOUR WARRANTY!!!!
1. root your defy with super one click
2. install 2ndinit (accept superuser request)
3 chose the android version to install that is(ICS 4.0.3,JB 4.1.2,4.2.2) =go with the latest
4. download the ROM and respective gapps and place it in your sd card
5. make backup of your apps if you want to
START WITH FULL BATTERY CHARGE
6. reboot and press vol down button on blue led blink.
7. your in boot menu>recovery>custom/stable recovery
8. Wipe data / factory reset.
9. Wipe cache partition.
10. go to Advanced>Wipe Dalvik Cache.
11. back
12. Install zip from sdcard>choose ROM.zip>power button>installation will start
13. same way install gapps
14. perform 9&10 again
15. reboot (first boot takes some time)
hope i helped you
Click to expand...
Click to collapse
is there way to do that without using PC "USB"?
using SD memory ?
meryqat said:
is there way to do that without using PC "USB"?
using SD memory ?
Click to expand...
Click to collapse
Try framaroot
hotdog125 said:
Try framaroot
Click to expand...
Click to collapse
i installed farmroot and i have chosed :
install superuser
then Gimli
then it show a message say success you havt to reboot your device.
then i turn the device off then no and nothing happened ! the device turn on normally
only notice new app called Superuser
what to do next ?
meryqat said:
i installed farmroot and i have chosed :
install superuser
then Gimli
then it show a message say success you havt to reboot your device.
then i turn the device off then no and nothing happened ! the device turn on normally
only notice new app called Superuser
what to do next ?
Click to expand...
Click to collapse
Super user is the root app
Ur phone is Rooted now,
Install 2ndinit
Sent from my MB526 using xda premium
Rawwr said:
Super user is the root app
Ur phone is Rooted now,
Install 2ndinit
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
done what next ?
meryqat said:
done what next ?
Click to expand...
Click to collapse
follow the instruction i gave you earlier!
abhirulz94 said:
follow the instruction i gave you earlier!
Click to expand...
Click to collapse
my device is unable to root !
i tried to root with super one click and then with UniversalAndroot then with GingerBreak
every time i used root checker , no root detect each time
meryqat said:
my device is unable to root !
i tried to root with super one click and then with UniversalAndroot then with GingerBreak
every time i used root checker , no root detect each time
Click to expand...
Click to collapse
now i have found my USB cable lol and going t start over - will update the result soon
android 4.1.1 on mu defy mb525 !
here is what i did :
restart and wipe data/cache then enable USB debugger
Rooting procedure for Motorola Defy+ MB526 (Bootloader7) using RSD Lite 5.7 with defy+ flash ! ......and work 100% great
Download Motorola Drivers package
root with SuperOneClick then install and run SndInitDefy_2.3
inter the loader menu and wipe data and cache
install zip from SD "CM10-200121018-NIGHTLY-mb526.zip"
restart
"Wipe Dalvik cache"
restart
install gapps "gapps-jb-20120726-minimal.zip"
and now i have android 4.1.1 defy+ mb526 on my defy mb525 !
awesome !
here's the link to Tutorial :
http://forum.gizmolord.com/custom-rom%27s/install-cm10-android-4-1-1-jelly-bean-rom-for-motorola-defydefy/
meryqat said:
here's the link to Tutorial :
http://forum.gizmolord.com/custom-rom%27s/install-cm10-android-4-1-1-jelly-bean-rom-for-motorola-defydefy/
Click to expand...
Click to collapse
Bro you need not go to any other site to find things.
Use the SEARCH button located above and all your questions will be answered.
We have the Beginners Guide here to help everyone new.
Please use the SEARCH button before posting...
Wish you all the best with your newly rooted phone :good:
debayan said:
Bro you need not go to any other site to find things.
Use the SEARCH button located above and all your questions will be answered.
We have the Beginners Guide here to help everyone new.
Please use the SEARCH button before posting...
Wish you all the best with your newly rooted phone :good:
Click to expand...
Click to collapse
yes i did , already have installed Android 4.2.2 Jellybean from this forums ,
but i have problem , my mobile network "2g/3g" kind of no signal all the time , what is this problem ?
, thanx
Related
Hi sorry if this has been answered already but i had thought this might help peeps having problems with boot looping i had this problem with wildpuzzle V8.0.8 the solution i used is
1) Remove all data from memory card (backup delete whatever u want)
2) Go to wwwdotsdcarddotorg/consumers/formatter/eula/
3) Download and unzip
4) Run program check all boxes (CAUTION WILL WIPE ALL DATA)
5) Reflash rom
This should solve problems with SD rebooting and bootloops it did mine
Hope this helps
tried this as a last resort... but alas - didn't work at all... ;p still either stuck on splash screen or loops it. this is getting frustrating...
onearm_htc_lover said:
Hi sorry if this has been answered already but i had thought this might help peeps having problems with boot looping i had this problem with wildpuzzle V8.0.8 the solution i used is
1) Remove all data from memory card (backup delete whatever u want)
2) Go to wwwdotsdcarddotorg/consumers/formatter/eula/
3) Download and unzip
4) Run program check all boxes (CAUTION WILL WIPE ALL DATA)
5) Reflash rom
This should solve problems with SD rebooting and bootloops it did mine
Hope this helps
Click to expand...
Click to collapse
Follow steps above also when wipped u do a factory reset in recovery on phone and wipe data n chache and THEN FLASH ROM again
Sent from my HTC Wildfire using XDA App
Doesn't work. But Jacob has developed a kernel that does - see the OC thread and you'll see.
onearm_htc_lover said:
Follow steps above also when wipped u do a factory reset in recovery on phone and wipe data n chache and THEN FLASH ROM again
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
fireplayer said:
Doesn't work. But Jacob has developed a kernel that does - see the OC thread and you'll see.
Click to expand...
Click to collapse
It does i used it a couple of tymes to get myself outa. Trouble i used it only uesterday n i sorted my bootloop problem out ill write a step by step guide nxt couple of days
Sent from my HTC Wildfire using XDA App
Well not for me and a few others... check the oc thread for info.
Sent from my HTC Wildfire using XDA App
For U8800 2.3 Official Update (28.12.2011)
Root required.
1. Install "Es File Explorer"
2. Es File Explorer > Setting > File Settings > check "Show Hidden Files"
3. Exit "Es File Explorer"
4. Install "Remount" (Stephen Stericson) app by market
5. Run "Remount"
6. Select "/.cust_backup"
7. Select "rw"
8. Click "REMOUNT"
Okey
Now, open "Es File Explorer" and go "/.cust_backup" folder.
it doesnt root with superone click latest, how im supposed to do that
genti7 said:
it doesnt root with superone click latest, how im supposed to do that
Click to expand...
Click to collapse
For me superoneclick get error but it correctly install superuser and su.
If rooted, Root Explorer can do it too.
Sent from my U8800 using Tapatalk
Blefish said:
If rooted, Root Explorer can do it too.
Sent from my U8800 using Tapatalk
Click to expand...
Click to collapse
Root explorer can't do it.
Which version do you use? Give me link, please.
Pls could someone translate this?
今天官方2.3修正版发布,但是同时官方锁了内核:即无法在粉屏下替换RECOVERY了。
对于一部分升级成功的人还好,但是有一部分人会遇到2.3体验版相同的问题:重启或关机无限卡第二屏,必须双清后才能进入。
以往的解决方法是替换民间RECOVERY后双清,但是现在无法在粉屏下替换,而以往的ROOT工具都必须打开LOG设置后重启一次,才能完成ROOT,但重启后必须双清,这样就造成了死循环。
所以本人连夜编写了U8800专用一键ROOT工具,只需打开USB调试和关闭快速关机即可ROOT。
无限卡第二屏的朋友先用我这个ROOT,然后重启后双清,再次进入机器后装Root.Explorer,替换为民间RECOVERY后再次重启双清。这样以后就不会卡了。
另外有些机器升级2.3时需要数据线连接手机,再按三键进粉屏才能升级。否则只进粉屏没有反应。
时间仓促就写这么多,有问题留言或者加我微博 @桌子哥
Click to expand...
Click to collapse
Are the correct drivers for root..
demolition23 said:
Pls could someone translate this?
Are the correct drivers for root..
Click to expand...
Click to collapse
Revision 2.3 official release today, but while the official locked the kernel: the pink screen can not be replaced under the RECOVERY.
For the better part of successful people to upgrade, but some people experience the version 2.3 will encounter the same problem: unlimited card restart or shut down the second screen, you must double-clear before entering.
The solution is to replace the previous private RECOVERY after double clear, but now can not be replaced under the pink screen, while the previous ROOT tools must be set to open LOG after reboot once, to complete ROOT, but must be double-clear after the restart, thus causing infinite loop.
So I wrote U8800 night ROOT dedicated a key tool, simply turn USB debugging on and off quickly to turn it off R OOT.
Infinite second screen with my friends first ROOT, and then double-clear after the restart, re-entering the machine after the installation Root.Explorer, replaced again after the restart civil RECOVERY double clear. This future will not card.
Moreover, some machines need to upgrade the 2.3 data cable to connect phone and press three keys into the powder-screen to upgrade. Otherwise, only the powder into the screen does not respond.
Time to write so hasty, I have problems leave a message or add a table microblogging @ Columbia
---------- Post added at 11:12 PM ---------- Previous post was at 10:34 PM ----------
I was able to Root this ver using DooMLoRD_v3_ROOT-zergRush-busybox-su
Could not go to Pink screen in chinese forum some on told its locked.....
I was able to move Recovery5.0.2.7.img using root explorer and got in to recovery screen as it does but there is no access to pink screen still.
you have the CW recovery running?
Ah, nothing. I didn't know the usb didn't work in pink screen in latest gb.
demolition23 said:
you have the CW recovery running?
Click to expand...
Click to collapse
Yes Recovery 5.0.2.7 running no issues
Now i replaced all raw images of last GB files with new one using Rootexplorer except recovery need to check Pink screen
I could not enter pink screen.....
krish_nank said:
Yes Recovery 5.0.2.7 running no issues
Now i replaced all raw images of last GB files with new one using Rootexplorer except recovery need to check Pink screen
Click to expand...
Click to collapse
Can you do
wipe data/factory reset
nandroid backup
and upload the backup?
I think that we will be able to restore it safely to previous beta 2.
And will be without locked pink screen.
demolition23 said:
Can you do
wipe data/factory reset
nandroid backup
and upload the backup?
I think that we will be able to restore it safely to previous beta 2.
And will be without locked pink screen.
Click to expand...
Click to collapse
Wipe data/cache/delvick successfully
Backup successful (To internal storage as i did not have enough mem on external)
Restored successfully (From internal storage)
every time when we connect USB cable in pink screen in PC it used to POPUP that U8800Pro connected now it does not....
Moved to General
This is a basic guide, i feel its more suited to the general section.
Take it easy
O_G
hi friends I downgrade to B162 from internal storage it works for me then i had full acsess to the pink screen ccw recovery and restore my miui backup no more problems.
I think that is waste of time until the final version comes.
the most strange thing to me was that when i install V100R001C00B522G001 i had a message that there is an upgrade and i receive an update.zip 28.64 MB via wifi, never manage to upgrade it stops with an error file.
Who has updated to beta version 2 (B518) won't feel any diference beside cannot access to pinkk bootloader, i've been reading the chinese huawei forum, and the lock to the pink bootloader is to stay, all the future releases will block it, huawei says that's to low support costs, cause when costumers brick the phones had being messing around the files in /image folder and huawei has to change the motherboard of the phones, we have still access to the folder, using some apps like "root explorer", but for the "dumb client" that just want to make some calls and use youtube and gmail, that doesn't make any difference...
Bye!
Ps3udo said:
Who has updated to beta version 2 (B518) won't feel any diference beside cannot access to pinkk bootloader, i've been reading the chinese huawei forum, and the lock to the pink bootloader is to stay, all the future releases will block it, huawei says that's to low support costs, cause when costumers brick the phones had being messing around the files in /image folder and huawei has to change the motherboard of the phones, we have still access to the folder, using some apps like "root explorer", but for the "dumb client" that just want to make some calls and use youtube and gmail, that doesn't make any difference...
Bye!
Click to expand...
Click to collapse
Well, they should fix fastboot then. In fact, they should replace the pink screen with fastboot.
Sent from my U8800
Company has asked its beta update users to install this new update as soon as possible as if any issue created because of beta would not be covered under warranty............
http://mirolta.com/2011/12/29/huawe...rbread-update-for-u8800-ideos-x5-smartphones/
krish_nank said:
Wipe data/cache/delvick successfully
Backup successful (To internal storage as i did not have enough mem on external)
Restored successfully (From internal storage)
every time when we connect USB cable in pink screen in PC it used to POPUP that U8800Pro connected now it does not....
Click to expand...
Click to collapse
Can you please share the backup?
Sent from my u8800
Blefish said:
Well, they should fix fastboot then. In fact, they should replace the pink screen with fastboot.
Sent from my U8800
Click to expand...
Click to collapse
I Agree, I've come from a Huawei U8230 (TMN A1) with fast boot, this was a lot better!!!
Bye!
Özgürce said:
For me superoneclick get error but it correctly install superuser and su.
Click to expand...
Click to collapse
it does with the previous 2.3.2
Hi all,
I'm new owner of a Motorola Defy + (MB526), I have no problem to root my phone with SuperOneClick app.
After, I tried to install the recovery with the 2init2.0 apk and my phone reboot in loop on the Motorola logo. I disable USB debugging before rebooting.
What can I do?
Thank you in advance!
PS: I can not even until the blue LED
Math43 said:
Hi all,
I'm new owner of a Motorola Defy + (MB526), I have no problem to root my phone with SuperOneClick app.
After, I tried to install the recovery with the 2init2.0 apk and my phone reboot in loop on the Motorola logo. I disable USB debugging before rebooting.
What can I do?
Thank you in advance!
PS: I can not even until the blue LED
Click to expand...
Click to collapse
just to get this clear: your phone wont boot, and you cant even access the 2ndinit bootmenu/recovery (so blue LED wont light up)? if so, did you install sd recovery, or Sndinit 2.0?
zakoo2 said:
just to get this clear: your phone wont boot, and you cant even access the 2ndinit bootmenu/recovery (so blue LED wont light up)? if so, did you install sd recovery, or Sndinit 2.0?
Click to expand...
Click to collapse
Hello,
Yes my phone wont boot, I cant acces to 2ndinit bootmenu/recovery.
No, I didnt install sd recovery or Sndinit2.0
But i could access to the "factory" recovery. I try to wipe with the two options but no changes.
Thanks for your reply !
so you have used 2ndinit2.0(i think sndinit is the same)
Did you have "success" after install?
Anyway, i think that you should flash it via rsd lite and try again.
buruss said:
so you have used 2ndinit2.0(i think sndinit is the same)
Did you have "success" after install?
Anyway, i think that you should flash it via rsd lite and try again.
Click to expand...
Click to collapse
Hello & thank for the reply !
I fix my pb by myself !
I use rsdlite with this full sbf file: http://forum.xda-developers.com/showthread.php?t=1263212
I will try to re-install 2ndinit2.0 this week-end.
Thanks
Did the led turned into green after u installed 2endinit ?? or it just said success ?
Monzer_ said:
Did the led turned into green after u installed 2endinit ?? or it just said success ?
Click to expand...
Click to collapse
The led turned green and I've the success message
Math43 said:
The led turned green and I've the success message
Click to expand...
Click to collapse
sry one more question about that , did u read that 2endinit is currently installed ??
Monzer_ said:
sry one more question about that , did u read that 2endinit is currently installed ??
Click to expand...
Click to collapse
Yes Sir, 2ndinit says is currently installed!
well that is strange , i would suggest trying another version of 2endinit maybe older version .
what are u trying to do with it if i may ask ?
Monzer_ said:
well that is strange , i would suggest trying another version of 2endinit maybe older version .
what are u trying to do with it if i may ask ?
Click to expand...
Click to collapse
Yes very strange! I will try again this week end with a old version.
2ndinit some times won't wrk i got this app in attachment wrk damm good
if ur phone is not booting, flash ur ph with sbf and root ur phone
then install this app and allow superuser ta da
illumanati22 said:
2ndinit some times won't wrk i got this app in attachment wrk damm good
if ur phone is not booting, flash ur ph with sbf and root ur phone
then install this app and allow superuser ta da
Click to expand...
Click to collapse
Thanks a lot, I re-root my phone, install your apk and it's work like a charm !
Thanks again !
illumanati22 said:
2ndinit some times won't wrk i got this app in attachment wrk damm good
if ur phone is not booting, flash ur ph with sbf and root ur phone
then install this app and allow superuser ta da
Click to expand...
Click to collapse
Yes this custom recovery will do the work, i had almost the same problem and i used this one , i flashed CM7 and MS2Ginger using this good luck
illumanati22 said:
2ndinit some times won't wrk i got this app in attachment wrk damm good
if ur phone is not booting, flash ur ph with sbf and root ur phone
then install this app and allow superuser ta da
Click to expand...
Click to collapse
i tried installing ur APK... after installing the apk ... i installed recovery system.... permitted the SU access permission.... got msg "Install Sucess!"http://media.xda-developers.com/images/icons/icon10.gif
but still cant get recovery boot menu...can u plz help....
Hi
can anyone help me please(in detail) how can i root my motorola defy +. I am getting confused by reading all the article because i am not getting exactly the same version as of mine.
System Version- 45.0.891.MB526.AsiaRetailkl.en.03
Model Number-MB526
Android version 2.3.4
Baseband Version EPU93_U00_.60.00
Kernel Version [email protected]#
Build Number 4.5.1.134_DFP-891
I am from India and please provide the verified link . Currently my phone is behaving very slow so i need to root and upgrade it .
I am not getting Asia retail SBF file for MB526 ,it's available for MB525 .it would be any problem if i used SBF available
for MB525?? Thanks in Advance ..Reply please .
Use the app called Framaroot you find it here on xda.
http://forum.xda-developers.com/showthread.php?p=37508806
Sent from my MB526 using xda app-developers app
cyrusct82 said:
Use the app called Framaroot you find it here on xda.
http://forum.xda-developers.com/showthread.php?p=37508806
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
I read from your links that Keep in mind that framaroot is not a permanent rooting application.can you please tell me it is ok to root via frameroot ?? Because i am new in rooting so don't have much more idea regarding this .can you please provide the link and process of rooting via CyanogenMod . Thanks
roushan said:
I read from your links that Keep in mind that framaroot is not a permanent rooting application.can you please tell me it is ok to root via frameroot ?? Because i am new in rooting so don't have much more idea regarding this .can you please provide the link and process of rooting via CyanogenMod . Thanks
Click to expand...
Click to collapse
Yes you can root with framaroot. And there is a retail asian SBF which i posted in another thread.
One advice for you - read, read, read before you do anything. You seem to have misunderstood some facts. Read this - http://forum.xda-developers.com/showthread.php?t=1216982
hotdog125 said:
Yes you can root with framaroot. And there is a retail asian SBF which i posted in another thread.
One advice for you - read, read, read before you do anything. You seem to have misunderstood some facts. Read this - http://forum.xda-developers.com/showthread.php?t=1216982
Click to expand...
Click to collapse
It's ok but i was saying that i am using DEFY+ and in the official link there is no SBF file for RetailAsia .The SBF file for Retail Asia is available for DEFY so can you tell me is it ok to use the SBF file for defy or use the SBF file for other Retail for DEFY+ ??
roushan said:
It's ok but i was saying that i am using DEFY+ and in the official link there is no SBF file for RetailAsia .The SBF file for Retail Asia is available for DEFY so can you tell me is it ok to use the SBF file for defy or use the SBF file for other Retail for DEFY+ ??
Click to expand...
Click to collapse
I've put the link for retail asian Defy+ on another thread:laugh:, how many times do i have to tell you this?
Here are the steps for rooting-
1. Take a backup of all your apps and data.
2. Download Framaroot 1.6.0 from the thread (don't forget to thank the dev) and download 2ndinit - http://forum.xda-developers.com/showthread.php?t=1032212.
3. Copy both apk files to your sd card.
4. Enable USB debugging and unknown sources in settings-->applications.
5. Open file manager and install and open the app.
6. Root.
7. Then install the 2ndinit apk.
8. Reboot, and when the LED becomes blue, immediately press the volume down button.
9. Then a screen will appear. Now you can choose an option by pressing volume button and go up/down by pressing volume up/down.
10. Choose recovery, then choose stable/custom recovery (whichever is there).
11. Choose backup and then choose backup all.
12. Be patient while it does the job, DO NOT TAKE OUT THE BATTERY IF YOU THINK IT IS STUCK.
13. Then the options screen will come back.
14. Now you can install custom ROMs, PM me if you need more help.
Don't stress yourself so much. Grab a fixed sbf of quarx cm 10.2 or what custom sbf you like. That's simple for you
Sent from my C6602 using Tapatalk 4
help
HI i installed frameroot and 2nd init .and i rebooted my defy + but not getting blue flashing light ,so i am not able to enter to boot menu .please repaly ASAP .
hotdog125 said:
I've put the link for retail asian Defy+ on another thread:laugh:, how many times do i have to tell you this?
Here are the steps for rooting-
1. Take a backup of all your apps and data.
2. Download Framaroot 1.6.0 from the thread (don't forget to thank the dev) and download 2ndinit - http://forum.xda-developers.com/showthread.php?t=1032212.
3. Copy both apk files to your sd card.
4. Enable USB debugging and unknown sources in settings-->applications.
5. Open file manager and install and open the app.
6. Root.
7. Then install the 2ndinit apk.
8. Reboot, and when the LED becomes blue, immediately press the volume down button.
9. Then a screen will appear. Now you can choose an option by pressing volume button and go up/down by pressing volume up/down.
10. Choose recovery, then choose stable/custom recovery (whichever is there).
11. Choose backup and then choose backup all.
12. Be patient while it does the job, DO NOT TAKE OUT THE BATTERY IF YOU THINK IT IS STUCK.
13. Then the options screen will come back.
14. Now you can install custom ROMs, PM me if you need more help.
Click to expand...
Click to collapse
You probably didn't open 2ndinit and install boot menu.
Sent from my MB526 using xda app-developers app
roiusky occupying
hotdog125 said:
You probably didn't open 2ndinit and install boot menu.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Please help screwed up with my phone !!!!!!!!!!!!!!!
first thanks to you i followed all the steps you told .i tried custom rom with cm-7-20130301-NIGHTLY-jordan.zip but stucked with Motorola M symbol the i tried Custom Rom with http://quarx2k.ru/cm10.1-nightly-defy+/2.6.32/ (09-Jul-2013 15:59 168M) and http://goo.im/gapps .it worked i mean installed but facing problem with bluetooth and pattern lock(all security type pin ,password,pattern were not working) and most importantly incoming call was not coming so i try to install cm-7-20130301-NIGHTLY-jordan.zip then after i rebooted my phone then again stucked with Motorola M symbol .Then remove battery and restart again but blue flash light is not coming and then only able to enter motorola boot option (reboot, apply recovery, wipe data and wipe cach) then i entered into recovery then update from sd card but getting signature failed error and now my battery is not even charging getting in boot option battey low cannot load program ...please help me what can i do ..any chance to get alive my phone ....thanks in advance ....
Need help!
not able to use google Play Store since I installed cm-10.2-20130917-NIGHTLY-mb526.zip
pls Suggest Gapps link Also
pls help me......
THANKS IN ADVANCE
Go to TJKV's gapps thread in the themes and apps section.
Sent from my MB526 using xda app-developers app
In call mute not working
Team:
i noticed defy with JB4.3 during call mute is not working?
Hi Guys,
I have the same problem with the play store and tried to install the newest 4.3 build from Quarks.
But when I restart the phone the boot menu that has the extra option to wipe dalvik and cache is gone
also when trying to flash the latest version it says that the file is wrong.
Normally when restarting the phone there were multiple option what to do, this is gone with my current 4.3 build.
Can you tell me what i need to do to get the other bootmenu back?
Thanks!
AlbertoMobilo said:
Hi Guys,
I have the same problem with the play store and tried to install the newest 4.3 build from Quarks.
But when I restart the phone the boot menu that has the extra option to wipe dalvik and cache is gone
also when trying to flash the latest version it says that the file is wrong.
Normally when restarting the phone there were multiple option what to do, this is gone with my current 4.3 build.
Can you tell me what i need to do to get the other bootmenu back?
Thanks!
Click to expand...
Click to collapse
What options can you see in the bootmenu?
hotdog125 said:
What options can you see in the bootmenu?
Click to expand...
Click to collapse
Hi, and thanks for your reply!
I updated from Quarkx CM Version 4.2 to 4.3 and also have the System Updater Pro installed.
But since the last update when I open the restart menu, I don't have options to select what should happen after the restart.
As far as I remember I could choose between: Restart, Recovery mode, etc.
Also my recovery menu is now "Android system recovery (3e)".
Before that it looked like this:
cdn.androidbeat.com/wp-content/uploads/2013/08/twrp_scrn.png
When trying to update the rom I get the following error:
"E: failed to verify whole-file signature"
Maybe you have a hint for me how to fix that?
You have gone to the stock recovery. Reboot your device, then during red M logo a blue LED appears. Press volume down when you see the blue LED.
Sent from my MB526 using xda app-developers app
hotdog125 said:
You have gone to the stock recovery. Reboot your device, then during red M logo a blue LED appears. Press volume down when you see the blue LED.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Thanks alot!
I did not know that I can switch between the two recovery menus! :good:
moran007 said:
Need help!
not able to use google Play Store since I installed cm-10.2-20130917-NIGHTLY-mb526.zip
pls Suggest Gapps link Also
pls help me......
THANKS IN ADVANCE
Click to expand...
Click to collapse
Works for me with the minimal gapps
Before installing the minimal gapps i've tried the ones with google now but i couldn't connect with play store, google plus...
MikBre said:
Works for me with the minimal gapps
Before installing the minimal gapps i've tried the ones with google now but i couldn't connect with play store, google plus...
Click to expand...
Click to collapse
playstore not working afer installing cm-10.2-20130917-NIGHTLY-mb526.zip. Please advise
sachintakate said:
playstore not working afer installing cm-10.2-20130917-NIGHTLY-mb526.zip. Please advise
Click to expand...
Click to collapse
EDIT - What problems are you facing?
Use minimal gapps by TJKV.
sachintakate said:
playstore not working afer installing cm-10.2-20130917-NIGHTLY-mb526.zip. Please advise
Click to expand...
Click to collapse
Gapps used?