Database Users

Droid 2/Global ROMS

Sorry if this has been asked but I have just ordered a Milestone 2 and i was wondering whether the Droid 2 ROMs would work on the Milestone 2. I know people say no but i remember reading in the D2G forums about a little patch you can implement to make D2 roms work on D2G - Isn't the hardware and drivers the same apart from the EVDO/CDMA part of the antennae?
Thanks, Jack

I tried to install a ROM designed to work on the D2G and I bricked my Milestone 2 so I advise you to not try it
I might have done something wrong but I won't test again as I had to restore my system with RSD Lite (and it's a pain in the a*s).

Well that sucks - wonder why it bricked it D:
I hope you did something wrong and it does work. I will just try when i get my phone.
If it doesn't i will either install ArgenROM or overclock to 2GHz

D2 custom roms mostly work, however the issue with those is that they do not initialise with the UMTS radio, instead they use CDMA. By "mostly", I mean "everything except for the phone part". All the difficult bits (wifi, GPS, camera etc etc) work perfectly. I've flashed the APEX rom to my phone without issue.
It's possible, when we can work it out, that we can force them to boot with the UMTS radio. When we've worked this out, we should be home free, thus giving us a few more roms to use =)

smacky_wolf said:
D2 custom roms mostly work, however the issue with those is that they do not initialise with the UMTS radio, instead they use CDMA. By "mostly", I mean "everything except for the phone part". All the difficult bits (wifi, GPS, camera etc etc) work perfectly. I've flashed the APEX rom to my phone without issue.
It's possible, when we can work it out, that we can force them to boot with the UMTS radio. When we've worked this out, we should be home free, thus giving us a few more roms to use =)
Click to expand...
Click to collapse
There is a file you can flash on the d2g to initialise the UMTS radio once a D2 rom is installed - I wonder if that would work?

What file?
Would you upload it? In a update.zip way?
Sent from my Milestone 2 XDA App

JackStoreytime said:
There is a file you can flash on the d2g to initialise the UMTS radio once a D2 rom is installed - I wonder if that would work?
Click to expand...
Click to collapse
If you can find it for me, I'm more than willing to try!

The "file" is called D2G romer tool. Yes, it is an update.zip which you install from clockwork recovery. It will NOT work on Milestone 2. However, the approach taken creating the romer tool can be used with Milestone 2 to create similar file based on Milestone 2.
Romer is far from perfect though. If you want to know more, google for Get~R~Done team, or go to droidforums.net and navigate to Droid2 Global section.
Sent from my DROID2 GLOBAL

leobg said:
The "file" is called D2G romer tool. Yes, it is an update.zip which you install from clockwork recovery. It will NOT work on Milestone 2. However, the approach taken creating the romer tool can be used with Milestone 2 to create similar file based on Milestone 2.
Click to expand...
Click to collapse
Thanks for that! Based on this info, I have an idea as to how I can make this work. Hell, I have another slightly dodgier thing to try that may also work :3
Will try tonight

smacky_wolf said:
Thanks for that! Based on this info, I have an idea as to how I can make this work. Hell, I have another slightly dodgier thing to try that may also work :3
Will try tonight
Click to expand...
Click to collapse
Lets hope we can get some ROMs a Flashin' on the MS2 then

I've downloaded that file. So by, let's say, replacing all files from that update.zip with files from the Milestone 2 Stock ROM, we would be able to create a "MS2 Romer"..?
There are quite some files to replace, but I think I might try it out this weekend!

w0ndersp00n said:
I've downloaded that file. So by, let's say, replacing all files from that update.zip with files from the Milestone 2 Stock ROM, we would be able to create a "MS2 Romer"..?
There are quite some files to replace, but I think I might try it out this weekend!
Click to expand...
Click to collapse
Lets see what we can do! Thanking btw

Hah! Messing around, I've managed to get a version of APEX to boot. However, in my messing I removed all the bits that make it APEX, but the rom does boot with the apex logo and the different key map, and the phone part works too..
Pretty sure I know what to modify to get this work... gonna mess some more :3

smacky_wolf said:
Hah! Messing around, I've managed to get a version of APEX to boot. However, in my messing I removed all the bits that make it APEX, but the rom does boot with the apex logo and the different key map, and the phone part works too..
Pretty sure I know what to modify to get this work... gonna mess some more :3
Click to expand...
Click to collapse
Well this is a start- just shows we are getting there
Also, The milestone's BL is blocked but devs just load the system files such as SenseUI or other ROMs without replacing kernels. With some tweaks would it be possible to port Sense 2.2/2.3 to the MS2? (I like blur but sense is good too and i tend to chop and change roms on my current phone)

Yay! Congratulation!
I see MM2 community raise. Now I don't have any arguments, I will buy MM2

JackStoreytime said:
With some tweaks would it be possible to port Sense 2.2/2.3 to the MS2? (I like blur but sense is good too and i tend to chop and change roms on my current phone)
Click to expand...
Click to collapse
Theoretically it's possible to bring across SENSE. Not sure how deeply it integrates, I don't know a lot about sense. Theoretically you could replace the bits of BLUR with Sense, dunno for sure yet. The fact that sense exists on non-sense devices makes me believe it's possible :3

But like someone said before, the camera probably wouldn't be working because of the integration of its libraries into the kernel

[email protected] said:
But like someone said before, the camera probably wouldn't be working because of the integration of its libraries into the kernel
Click to expand...
Click to collapse
If the camera itself is a part of sense, then sure. But otherwise, D2 roms have working camera on them on MS2.

smacky_wolf said:
If the camera itself is a part of sense, then sure. But otherwise, D2 roms have working camera on them on MS2.
Click to expand...
Click to collapse
They just use the moto client for the camera so it works so we could keep the moto camera?

Hey, try Apex Rom and youre gonna see it mostly works(except from, obviously, the signal)
Sent from my Milestone 2 XDA App

Install CyanogemMod 7 in your Milestone 2

Old Thread:
Hi guys,
With this new kernel and a lot of new ideas, isnt better if we try a new port of cyanogen with no motoblur?? Particulary, i prefer that ROM...
I didnt know how to do, but i can test...
There are so many roms for droid 2, like fission, that i want to use in my milestone 2, but see that mike and others try to port but doesnt work. But now, we have new roms and new oportunites...
=)
Is that port possible now (with leaked CHINA rom)?
Click to expand...
Click to collapse
Rom UPDATED!! (02/09): Check on DEV Section using the link below
New Rom Release (28/08):
Hi Guys,
A new CM7 Rom was just released in DEV forum by Endless7 (thanks!)... If anyone (like me!) dont be able to post in DEV forums and need suport for this ROM... PLZ!! USE THIS TREAD....
I´m working now, but I will try this ROM at Night, finger crossed! THIS IS THE WAY
Bye..

jorgebaruchi said:
Hi guys,
With this new kernel and a lot of new ideas, isnt better if we try a new port of cyanogen with no motoblur?? Particulary, i prefer that ROM...
I didnt know how to do, but i can test...
There are so many roms for droid 2, like fission, that i want to use in my milestone 2, but see that mike and others try to port but doesnt work. But now, we have new roms and new oportunites...
=)
Is that port possible now (with leaked CHINA rom)?
Click to expand...
Click to collapse
Well, I'm still learning the basics of android building. As soon as I get my custom hijack for 2nd init working I will try to port CM to the Milestone2. Note that I'm not promising any dates. My free time is very short and I'll do my best, but I don't want to get under pressure because of this

I think a leaked unlocked bootloader would do the trick
Just jocking. As I see it, nothing has changed regarding custom roms, as the bootloaded stays the same.
But I am quite confident, that r2beta0 will have progress on 2nd-init soon.

cypressious said:
I think a leaked unlocked bootloader would do the trick
Just jocking. As I see it, nothing has changed regarding custom roms, as the bootloaded stays the same.
But I am quite confident, that r2beta0 will have progress on 2nd-init soon.
Click to expand...
Click to collapse
filgers crossed!! but i remender that there are some blocks on system booting with froyo rom... then, i thinked that new rom could change this issue... =/
well, thks everybody!

r2beta0 said:
Well, I'm still learning the basics of android building. As soon as I get my custom hijack for 2nd init working I will try to port CM to the Milestone2. Note that I'm not promising any dates. My free time is very short and I'll do my best, but I don't want to get under pressure because of this
Click to expand...
Click to collapse
I think we don't need the 2nd-init built specially for GB rom, since Defy's CM7 (and Droid 2/X's) still have the base SBF on froyo. Maybe if we exchange the boot.img and devtree.img from GB leak to the ones inside Defy's CM7 update.zip (don't forget to delete /system/etc/motorola/bp_nvm_default/pds_init too, or you'll get all that GSM problems again)?
Edit: Won't Apex 2.0 RC2 work on GB Mile2?
@Milestone 2 (Finnaly on Gingerbread!)

dangpzanco said:
I think we don't need the 2nd-init built specially for GB rom, since Defy's CM7 (and Droid 2/X's) still have the base SBF on froyo. Maybe if we exchange the boot.img and devtree.img from GB leak to the ones inside Defy's CM7 update.zip (don't forget to delete /system/etc/motorola/bp_nvm_default/pds_init too, or you'll get all that GSM problems again)?
Edit: Won't Apex 2.0 RC2 work on GB Mile2?
@Milestone 2 (Finnaly on Gingerbread!)
Click to expand...
Click to collapse
We need 2nd-init in order to change the boot sequence required by CM7. DroidX already have a customized 2nd-init for CM7, but I don't want to use it yet as it uses bootscripts inside a /system/etc/shadow-boot.zip. I prefer to have my files ready to edit and not inside a zip file. Also, trying to make my own hijack is giving me knowledge I will need when trying to port CM to M2.

r2beta0 said:
We need 2nd-init in order to change the boot sequence required by CM7. DroidX already have a customized 2nd-init for CM7, but I don't want to use it yet as it uses bootscripts inside a /system/etc/shadow-boot.zip. I prefer to have my files ready to edit and not inside a zip file. Also, trying to make my own hijack is giving me knowledge I will need when trying to port CM to M2.
Click to expand...
Click to collapse
Hm... Okay, nice! So we have a better coded 2nd-init.
PS: If you need to unpack a boot.img to get the scripts/zImage, I got it with dsixda's Kitchen
@Milestone 2 (Finnaly on Gingerbread!)

dangpzanco said:
Hm... Okay, nice! So we have a better coded 2nd-init.
PS: If you need to unpack a boot.img to get the scripts/zImage, I got it with dsixda's Kitchen
@Milestone 2 (Finnaly on Gingerbread!)
Click to expand...
Click to collapse
Yeps, I'm using that one too.

Hi guys,
Searching the web, i found a oficial port of MIUI for droid 2, than i think: "Can we port this version with the ch kernel and change the baseband?"
If its possible, i think that this way is more simple, however port a defy rom and fix the incompatible bugs...
=)

jorgebaruchi said:
Hi guys,
Searching the web, i found a oficial port of MIUI for droid 2, than i think: "Can we port this version with the ch kernel and change the baseband?"
If its possible, i think that this way is more simple, however port a defy rom and fix the incompatible bugs...
=)
Click to expand...
Click to collapse
We should check first if this ROM is compatible with the kernels we have available. If so, we can try to port from that. Some ppl into Development forum are already trying to do that.

r2beta0 said:
We should check first if this ROM is compatible with the kernels we have available. If so, we can try to port from that. Some ppl into Development forum are already trying to do that.
Click to expand...
Click to collapse
It is more difficult to port from a CDMA device. If you achieve Apex Rom to work with GSM network, then you can think about porting it.
@Milestone 2 (Finnaly on Gingerbread!)

Hey guys, a new ROM has just released on Dev Forum, click here and see by your self!!!!

One maybe stupid question:
Can I install this rom on froyo or should I first upgrade my MM2 to GB?

There´s what u have to do (didn´t test yeat, I will try at night. But u can always downgrade with a stock SBF):
** Make u sure of your phone is rooted before everything !! **
1. Download all-in-one.zip and put into /sdcard/
2. Download and Install Droid2bootstrapper (old CWM) from the internet/market
3. Update to Ported Defy CWM (there´s a thread in general forum explain how to install that)
4. Boot into CWM and apply the all-in-one.zip and after (without reboot) make a full-wipe (make u sure that u have maked a backup of everything before)
5. At this moment, reboot your phone and use the keys combination for enter in bootloader mode
6. Download the fixed_sbf from the original thread in DEV forum and apply with RSD lite.
7. Your phone will reboot and after some minutes, U Can Enjoy the new ROM!!!

I think I made ​​a big mistake!
I touch everything and I'm going to Defy baseband! I change the parameter.
Since the network can not be found.
Any idea?
i will take a look at this

ping0o said:
I think I made ​​a big mistake!
I touch everything and I'm going to Defy baseband! I change the parameter.
Since the network can not be found.
Any idea?
i will take a look at this
Click to expand...
Click to collapse
Strange..
Try that tread and if dont work, reapply the rom...

Good mod!
But does anybody know how can I get back low battery beep and camera sounds? I find them rather useful.

I got struck in "google" logo and the phone dont boot
how can i do factory reset in bootmenu from the CM7 ? i dont find this option there...
or even re-install all the stuff...
EDIT: i can't open CWM 4.0 from the BootMenu 1.0.2 , i try latest recovery or stable recovery but it says "error in /system/bootmenu/script/recovery.sh (result: no such file or directory)
Please help ! T__T

I can't post in thread on development's subforum, so I ask my question here:
where can I find a tool and howto to make my own custom *.zip file to use with CWM? I have found a tool called Android Kitchen, but readme inside archive says, that it is mainly created for HTC devices. Am I following a correct path , or I should search some other tools?
update:
I have successfully flashed my custom *.zip file based on information taken from www[dot]londatiga[dot]net/it/how-to-create-android-update-zip-package/

coming from miui, how should i update?

Q&A/T For [Kitkat] CM11 Android 4.4.4 for the Droid X

This thread has been created
for
Questions & Answers/Troubleshooting
Specific to
[Kitkat] CM11 Android 4.4.4 for the Droid X
Click link here>> (http://forum.xda-developers.com/showthread.php?t=2670547) <<Click link here
Please feel free to share issues, questions and offer help
It is always best to thank a ROM OP, in lieu of simply posting "Thank you".
Please keep discussion focused, on the topic described in the OP​

well Mirroring to chromecast does not work if anyone was asking.

HDMI not working for me (even with RealHDMI)

bluesatyr said:
HDMI not working for me (even with RealHDMI)
Click to expand...
Click to collapse
using cm-11-20140706-UNOFFICIAL-shadow or newer?

sd_shadow said:
using cm-11-20140706-UNOFFICIAL-shadow or newer?
Click to expand...
Click to collapse
Newer (on cm-11-20140709-UNOFFICIAL-shadow)

I got HDMI video out to work on cm-11-20140713-UNOFFICIAL-shadow with realHDMI app.
took a minute or more

sd_shadow said:
I got HDMI video out to work on cm-11-20140713-UNOFFICIAL-shadow with realHDMI app.
took a minute or more
Click to expand...
Click to collapse
Works! Awesome, thanks!
Now if i could just get it to fullscreen...

bluesatyr said:
Works! Awesome, thanks!
Now if i could just get it to fullscreen...
Click to expand...
Click to collapse
Have a zoom option on tv?

sd_shadow said:
Have a zoom option on tv?
Click to expand...
Click to collapse
No

do we have a fully working safe strap that mounts partitions correctly and stuff i know ahhhhhh got it booting but was there ever a fully working one?

billycar11 said:
do we have a fully working safe strap that mounts partitions correctly and stuff i know ahhhhhh got it booting but was there ever a fully working one?
Click to expand...
Click to collapse
Yea but its only good for having 2 cm11 ROMs since he hasn't built PAC and roeblatt3 never finished liquidkk I believe..
Sent from my Paranoid Bionic

Wifi on 802.11n seems pretty unstable, no internet connection from time to time... but seems not the rom's problem.. same issue on other roms but still wondering if there's any solution/workaround (instead of working on 802.11g...)

The current version of CM 11 on my Droid X has no WiFi issues.
Sent from my STUDIO 5.5 using Tapatalk
---------- Post added at 04:38 PM ---------- Previous post was at 04:38 PM ----------
Try it on a clean install.
Sent from my STUDIO 5.5 using Tapatalk

ashyoff said:
Wifi on 802.11n seems pretty unstable, no internet connection from time to time... but seems not the rom's problem.. same issue on other roms but still wondering if there's any solution/workaround (instead of working on 802.11g...)
Click to expand...
Click to collapse
do you have access to the router? switch to TKIP instead of AES encryption, it might help you.

Newbie wants to try and CM11 DroidX
Howdy
I've begun researching the possibility of taking my clunky old Verizon DroidX that's been disconnected from a phone# and applying a custom Rom in the hopes of improving its performance.
After receiving considerable help from @sd_shadow with getting OtterX working beautifully on my KF, I'm feeling brave enough to try something similar now.
The 1st step I've taken was to use "Android Device Drivers Install" - https://www.youtube.com/watch?v=j_KPGUMzrjU (VERY informative) youtube video by Rootjunky.com
I successfully used "How to Root Droid X & Droid 2 on Android V2.3.4" - https://www.youtube.com/watch?v=w543XNIExWo to get it rooted - YAY.
Next is getting a nandroid backup done. I was just about to purchase "Droid X Recovery Bootstrap" - https://play.google.com/store/apps/details?id=com.koushikdutta.droidx.bootstrap from the Play Store for $3 but then I noticed a wise man said "if Droid X bootstrap works for you great, but don't be surprised if it causes a bootloop"
I know that the next logical step is to be able to restore the device before going any further. I'm thinking CWM is a good way to go.
I need advice as far as which specific goal I should be shooting for as far as the best recommended final ROM based on your successes with my configuration. I really do like CM11/4.4.4 a whole lot.
Any Suggestions please?
System version = 45.621.10.MB810.Verizon.en.US
Android version = 2.3.4
Kernel Version - 2.6.32.9-g3e80c7a
Build number = 4.5.1_57_DX9-10
ERI = 5
PRL = 52826
Thanks in advance for reading this and possibly even considering to point me in the right direction.

Lunarino said:
Howdy
I've begun researching the possibility of taking my clunky old Verizon DroidX that's been disconnected from a phone# and applying a custom Rom in the hopes of improving its performance.
After receiving considerable help from @sd_shadow with getting OtterX working beautifully on my KF, I'm feeling brave enough to try something similar now.
The 1st step I've taken was to use "Android Device Drivers Install" - https://www.youtube.com/watch?v=j_KPGUMzrjU (VERY informative) youtube video by Rootjunky.com
I successfully used "How to Root Droid X & Droid 2 on Android V2.3.4" - https://www.youtube.com/watch?v=w543XNIExWo to get it rooted - YAY.
Next is getting a nandroid backup done. I was just about to purchase "Droid X Recovery Bootstrap" - https://play.google.com/store/apps/details?id=com.koushikdutta.droidx.bootstrap from the Play Store for $3 but then I noticed a wise man said "if Droid X bootstrap works for you great, but don't be surprised if it causes a bootloop"
I know that the next logical step is to be able to restore the device before going any further. I'm thinking CWM is a good way to go.
I need advice as far as which specific goal I should be shooting for as far as the best recommended final ROM based on your successes with my configuration. I really do like CM11/4.4.4 a whole lot.
Any Suggestions please?
System version = 45.621.10.MB810.Verizon.en.US
Android version = 2.3.4
Kernel Version - 2.6.32.9-g3e80c7a
Build number = 4.5.1_57_DX9-10
ERI = 5
PRL = 52826
Thanks in advance for reading this and possibly even considering to point me in the right direction.
Click to expand...
Click to collapse
Just follow the install guide for cm11 its pretty idiot proof and if u brick you can sbf using ezSBF or rsd
Sent from my Paranoid Bionic

Lunarino said:
Howdy
I've begun researching the possibility of taking my clunky old Verizon DroidX that's been disconnected from a phone# and applying a custom Rom in the hopes of improving its performance.
After receiving considerable help from @sd_shadow with getting OtterX working beautifully on my KF, I'm feeling brave enough to try something similar now.
The 1st step I've taken was to use "Android Device Drivers Install" - https://www.youtube.com/watch?v=j_KPGUMzrjU (VERY informative) youtube video by Rootjunky.com
I successfully used "How to Root Droid X & Droid 2 on Android V2.3.4" - https://www.youtube.com/watch?v=w543XNIExWo to get it rooted - YAY.
Next is getting a nandroid backup done. I was just about to purchase "Droid X Recovery Bootstrap" - https://play.google.com/store/apps/details?id=com.koushikdutta.droidx.bootstrap from the Play Store for $3 but then I noticed a wise man said "if Droid X bootstrap works for you great, but don't be surprised if it causes a bootloop"
I know that the next logical step is to be able to restore the device before going any further. I'm thinking CWM is a good way to go.
I need advice as far as which specific goal I should be shooting for as far as the best recommended final ROM based on your successes with my configuration. I really do like CM11/4.4.4 a whole lot.
Any Suggestions please?
System version = 45.621.10.MB810.Verizon.en.US
Android version = 2.3.4
Kernel Version - 2.6.32.9-g3e80c7a
Build number = 4.5.1_57_DX9-10
ERI = 5
PRL = 52826
Thanks in advance for reading this and possibly even considering to point me in the right direction.
Click to expand...
Click to collapse
Do not use the droid x bootstrap from play store, it was designed for froyo not gingerbread. If you would like to buy one pick droid 2 or 3, but the modified one in the op is best.
Sent from my XT894 using Tapatalk

sd_shadow said:
Do not use the droid x bootstrap from play store, it was designed for froyo not gingerbread. If you would like to buy one pick droid 2 or 3, but the modified one in the op is best.
Sent from my XT894 using Tapatalk
Click to expand...
Click to collapse
I used the modified droid x one not the modified droid 2 lol it worked but if left on stock it made it to where every time device was powered on it went to cwm and had to select reboot to get into stock system. Once I flashed a ROM that stopped happening tho.
Sent from my Paranoid Bionic

Oggie7797 said:
I used the modified droid x one not the modified droid 2 lol it worked but if left on stock it made it to where every time device was powered on it went to cwm and had to select reboot to get into stock system. Once I flashed a ROM that stopped happening tho.
Sent from my Paranoid Bionic
Click to expand...
Click to collapse
Booting to cwm error, is common using any of the bootstraps, with the dx, d2, and d2g
Sent from my XT894 using Tapatalk

sd_shadow said:
Reboot to cwm, is common using any of the bootstraps, with the dx, d2, and d2g
Sent from my XT894 using Tapatalk
Click to expand...
Click to collapse
I've only ever owned the droid x and used modified DX bsr but I never stayed stock for long the reboot to cwm I was talking about was on my sister's DX and I noticed it briefly on mine when I was on stock (one of those rare occasions)
Sent from my Paranoid Bionic

[Q&A] [ROM][OFFICIAL][4.4.4.001] BlissStalk by Team Bliss - MOTO_MSM8960(Unified)-10

[Q&A] [ROM][OFFICIAL][4.4.4.001] BlissStalk by Team Bliss - MOTO_MSM8960(Unified)-10
Q&A for [ROM][OFFICIAL][4.4.4.001] BlissStalk by Team Bliss - MOTO_MSM8960(Unified)-10/24/14
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL][4.4.4.001] BlissStalk by Team Bliss - MOTO_MSM8960(Unified)-10/24/14. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

GPS on KKBL
I'm coming from JBBL (some odd rom called kitstalk...)
Is it recommended/required to get GPS lock while on stock 44x before flashing BlissStalk?

unaBonger said:
I'm coming from JBBL (some odd rom called kitstalk...)
Is it recommended/required to get GPS lock while on stock 44x before flashing BlissStalk?
Click to expand...
Click to collapse
Yes you must do that when you update to KKBL on the moto_msm8960 device. If you don't, then there will be no gps lock.

what is the actual size of the rom's zip?

Yes what size is the rom? I can't get a correct download, I've tried 2 browsers on my phone & I've tried on my pc doesn't get what I think is a complete download. I think the size is around 242mb
Sent from my DROID RAZR HD using Tapatalk

For moto_msm8960 it is 241.68mb. Download the md5sum to compare md5s.

I don't know if it is on my end or yours, but I can't get a correct download. All I get is anywhere from 150 mb to 190 mb. That's phone or PC. I figured if the file size isn't correct then I'm not trying to install it & can't see how the md5 could be anywhere close to being correct.
Sent from my DROID RAZR HD using Tapatalk

Probably your end. I downloaded it just fine. Try an app called advanced Download Manager.

Ok will do. Thanks.
Sent from my DROID RAZR HD using Tapatalk

Dinger4u said:
I don't know if it is on my end or yours, but I can't get a correct download. All I get is anywhere from 150 mb to 190 mb. That's phone or PC. I figured if the file size isn't correct then I'm not trying to install it & can't see how the md5 could be anywhere close to being correct.
Sent from my DROID RAZR HD using Tapatalk
Click to expand...
Click to collapse
Same issue here, I cannot get the whole file.
When I get home I'll try over another network and see what happens.

topshot17 said:
Same issue here, I cannot get the whole file.
When I get home I'll try over another network and see what happens.
Click to expand...
Click to collapse
Update: I got it, turned out to be a browser issue, switched browsers and got it fine.

For those that can't get past the boot animation, this is reported to work. Boot into TWRP, Go to the advanced wipe menu but don't wipe anything. Check data and hit change file system. Check ext4. Then swipe to confirm, wait then reboot. This is happening because when you updated to KitKat you didn't change to the file format to the new format.
(You will lose all your data, but it should boot afterwards)

Thank You
Hey well i tried this new rom After Cm11, PA, PAC, and all of these, and i´m so impressed with this rom, is the best in all ways,
but i have a question:
When i try to change DPI it doesnt make effect, i reboot and nothing still the same DPI, i looked trough system files (build.prop) but i didnt find the "ro.sf.lcd_density" String, should i add the string to make it work or what?
Thank you in advance!
And Please continue developíng this Rom is The best!:fingers-crossed::good:

jprexxni said:
Hey well i tried this new rom After Cm11, PA, PAC, and all of these, and i´m so impressed with this rom, is the best in all ways,
but i have a question:
When i try to change DPI it doesnt make effect, i reboot and nothing still the same DPI, i looked trough system files (build.prop) but i didnt find the "ro.sf.lcd_density" String, should i add the string to make it work or what?
Thank you in advance!
And Please continue developíng this Rom is The best!:fingers-crossed::good:
Click to expand...
Click to collapse
Nevermind, i just added the line and it worked
Sent From My Razr M (Bliss Stalk ROM) xt907

jprexxni said:
Nevermind, i just added the line and it worked
Sent From My Razr M (Bliss Stalk ROM) xt907
Click to expand...
Click to collapse
I can add it to the build.prop and it will be fine for the RAZR M but it will make the screen size to small on the HD and MAXX. Unless I can find a dpi that looks good on the M and HD/MAXX, the only way is to manually add it to the build.prop.

Yeah i know, well i changed to 182 looks awesome (i like the small things) , but you culd add (fix) the option to change dpi because it doesnt work
+ i found a bug in the torch that when i turn on and i try to turn off dont works, i always need to lock the screen to turn off.
Sent From My Razr M (Bliss Stalk ROM) xt907

jprexxni said:
Yeah i know, well i changed to 182 looks awesome (i like the small things) , but you culd add (fix) the option to change dpi because it doesnt work
+ i found a bug in the torch that when i turn on and i try to turn off dont works, i always need to lock the screen to turn off.
Sent From My Razr M (Bliss Stalk ROM) xt907
Click to expand...
Click to collapse
I will add the fix to the op or I may just add it to the rom. Also I just noticed that torch bug last night, will look into fixing that.

Working Update
Just wanted to update you, let you know I've been running the 10/25 build for a few days now and it's running great. Thanks for this.

Can anyone help Me ?
I m running stock 4.1.2 build 98.30.1 xt907 ......but i wanted to ask should i update my razr m to 4.4.2 kitkat OTA update or stay at jellybean ..... Are there any bugs in stock kitkat rom

wsking907 said:
Can anyone help Me ?
I m running stock 4.1.2 build 98.30.1 xt907 ......but i wanted to ask should i update my razr m to 4.4.2 kitkat OTA update or stay at jellybean ..... Are there any bugs in stock kitkat rom
Click to expand...
Click to collapse
I Love KitKat but it has a lot of bugs in razr m, i always get annoyed by those bugs, so i recomend you should stay at JB its better for the razr M

What's stable and available for Nook Color right now?

I'd really love to install Nougat, but I know that LineageOS isn't ready for Nook Color yet. I'm stuck running Jellybean, and it's too outdated for my needs. I've been researching for hours with few useful leads.
Does anyone have advice?

Batshua said:
I'd really love to install Nougat, but I know that LineageOS isn't ready for Nook Color yet. I'm stuck running Jellybean, and it's too outdated for my needs. I've been researching for hours with few useful leads.
Does anyone have advice?
Click to expand...
Click to collapse
Cm11 will be the best you get given the limited hardware of the device. Just get it from the cyanogen mod archive server

cyanogen mod archive server???? where would I find that?
I still have a nookHD+: BNRV200 that's stuck at the update page and I lost the microsd card that was in it(any help here would be great). But here's what I need help on - I bought A BNRV200 and 2 BNTV250-A I'd love to put CM10 in them but I can't find the files or even what files are needed to do that. I did find the sideload_update_1-1 yesterday but I still need to know where ans what else to get. Please help, thanks

Cm7.2
After fighting with cm10 and cm11 for a month, I tried cm7.2 and it worked first try. I wasted/spent many hours searching for matching cm gapp
cwm generics files

RerunNook said:
Cm7.2
After fighting with cm10 and cm11 for a month, I tried cm7.2 and it worked first try. I wasted/spent many hours searching for matching cm gapp
cwm generics files
Click to expand...
Click to collapse
do you still have links by chance? i keep getting 404s and files not found

vertigon said:
do you still have links by chance? i keep getting 404s and files not found
Click to expand...
Click to collapse
See: https://forum.xda-developers.com/t/archive-roms-recoveries-more.4107239/

nmyshkin said:
See: https://forum.xda-developers.com/t/archive-roms-recoveries-more.4107239/
Click to expand...
Click to collapse
awesome, thanks!