[Q] Help - I'm going mad!!! - Galaxy S 4 Q&A, Help & Troubleshooting

Hello,
I wonder if you could help me. I'm going mad here. I've broken my S4 and I wasn't even tinkering with it, really.
I've had it since May.. When I set it up, I rooted it, but haven't actually used the feature for anything. I've been running stock kernel and ROM ever since.
I've also had that widespread issue that people seem to get all the time with SD cards where every single time you turn the phone off and on again, it comes up with a warning that the SD card is damaged and only a manual mount will fix.
It happened yesterday but on this occasion, my card wouldn't mount.. It just said that it was damaged and refused to mount.And that's when the trouble started.. i restarted the phone on multiple occasions, did battery pulls but it was just behaving oddly.. the camera kept saying 'camera failed' before and after the pulls (the SD card was out of it by this point)..the phone was overheating.. it kept on crashing..etc
So I did a reluctant factory reset.. It crashed several times in doing so and has now restarted without going through the Google welcome setup. That's because there are no Google apps on it.. there is no playstore and a thing comes up in the notification area telling me i need to install Google services but then crashes when I tap on it. I've sideloaded Google Play but it tries to sign me in and then crashes because it needs this Google Services thing.
I can't update the software because it's rooted so it comes up with a warning saying I have modified my device and don't have access to updates. Which means I can't take it back under warranty.
Without the Play Store, I can't access Triangle Away (which I assume I would need before de-rooting even if I haven't installed a custom ROM or kernel, just to remove any trace of rooting) and I can't download CWM to try to flash a new ROM to try to fix it myself.
I must also say I don't have access to a Windows machine to do anything on.. Just my MacBook Pro.
It's 30 degrees outside, I have a useless phone on my hands and I'm baking up here as I lose my will to live. Please, if anybody can help, let me know.
Thanks so much in advance.

try reflashing to stock firmware using odin follow this http://forum.xda-developers.com/showthread.php?p=41072426
i dont think you will need this still .... if flashing back to stock firmware doesnt solve the whole problem try this....
here -- http://forum.xda-developers.com/attachment.php?attachmentid=2060897&d=1371888678
apk for TriangleAway v3.00 install it using file manager on your phone..
dont worry your phone can be unbricked * most probably * :good:

noobismyname said:
try reflashing to stock firmware using odin follow this http://forum.xda-developers.com/showthread.php?p=41072426
i dont think you will need this still .... if flashing back to stock firmware doesnt solve the whole problem try this....
here -- http://forum.xda-developers.com/attachment.php?attachmentid=2060897&d=1371888678
apk for TriangleAway v3.00 install it using file manager on your phone..
dont worry your phone can be unbricked * most probably * :good:
Click to expand...
Click to collapse
Thank so much for taking the time to help me out here. I'm gonna try all this.

philliplavelle said:
Thank so much for taking the time to help me out here. I'm gonna try all this.
Click to expand...
Click to collapse
So, I'm stuck at the first hurdall.. I have no PC access.. Only my MacBook Pro.. I can't seem to find a working version of Odin for Mac.. the search on here brings up something called Heimdall.. Am I ok to use that?
UPDATE: Jeez, Heimdall looks complex! I don't think I can do it. It doesn't seem to want to play with the .tar files in the original FW I've downloaded and God knows how I'm supposed to extract it. This is way too complex for me. I am not exaggerating.. I have no access to a PC that I can use (other than my work one which has a strict IT policy stopping installation of anything on it.)
I'm looking around for Odin for Mac.. some places say it exists but I can't find an actual programme and I haven't a clue where to start with terminal. I'm a bit tech savvy - I'm not that much so though

@philliplavelle
Here's a link to a Dropbox folder containing an app called Sgs4 flasher install this, with this you can flash the PhilZ CWM recovery .tar file (also in the same folder) and I have also included Triangle Away by Chainfire.
http://db.tt/IUnFGpP6
Once you have PhilZ CWM installed you can then perform factory reset, wipe data and dalvik. If that doesn't work then go to mounts and storage and format system, data and cache. BEFORE YOU DO THIS MAKE SURE YOU HAVE A FLASHABLE ROM. ZIP FILE ON YOUR PHONES INTERNAL SD CARD, DO NOT FORMAT SD CARD.
then you can go to install zip from SD card and flash new ROM
Sent from my GT-I9505 using XDA Premium HD app

Obagleyfreer said:
@philliplavelle
Here's a link to a Dropbox folder containing an app called Sgs4 flasher install this, with this you can flash the PhilZ CWM recovery .tar file (also in the same folder) and I have also included Triangle Away by Chainfire.
http://db.tt/IUnFGpP6
Once you have PhilZ CWM installed you can then perform factory reset, wipe data and dalvik. If that doesn't work then go to mounts and storage and format system, data and cache. BEFORE YOU DO THIS MAKE SURE YOU HAVE A FLASHABLE ROM. ZIP FILE ON YOUR PHONES INTERNAL SD CARD, DO NOT FORMAT SD CARD.
then you can go to install zip from SD card and flash new ROM
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
Thank you for this. The file I have of the FW was downloaded from the post the first person who answered quoted. On my Mac, it's not a .zip file, it's a folder with a .tar.md5 file and another ssl one or something. Am I not able to flash these? They are not .zip. Apologies if I'm being extremely stupid.
UPDATE: Flashed PhilzCWM - but the phone won't enter recovery mode. It boots up, and the little tiny blue writing at the top implies it is going into recovery mode, but it doesn't. Screen just sits at black and then it vibrates again and goes to normal boot.
UPDATE 2: And now it just sits on the black screen with the words: Samsung Galaxy S4 GT-I9505 and tiny blue writing in the top left and doesn't do anything.

philliplavelle said:
Thank you for this. The file I have of the FW was downloaded from the post the first person who answered quoted. On my Mac, it's not a .zip file, it's a folder with a .tar.md5 file and another ssl one or something. Am I not able to flash these? They are not .zip. Apologies if I'm being extremely stupid.
UPDATE: Flashed PhilzCWM - but the phone won't enter recovery mode. It boots up, and the little tiny blue writing at the top implies it is going into recovery mode, but it doesn't. Screen just sits at black and then it vibrates again and goes to normal boot.
UPDATE 2: And now it just sits on the black screen with the words: Samsung Galaxy S4 GT-I9505 and tiny blue writing in the top left and doesn't do anything.
Click to expand...
Click to collapse
Just flash your phone with stock firmware and it is fine. Samsung still repair your phone for a fee. So if anything goes wrong take the phone to Samsung

Thanks for the response but as per the above post, I am unable to even flash anything because I can't get into recovery mode!

To go to recovery mode try two things:
Either press volume up+home and power and hold all 3, you will see the words 'recovery booting' keep all button held down still. Your phone will restart back at that i9505 screen and you'll see the blue words again, keep holding those buttons! You're fingers will be sore but this second time you should boot into recovery mode. Let go of buttons when in recovery
Or wait till you see blue writing the second time and when it appears wait 1 sec then release power button but still hold home ad volume up.
Sent from my GT-I9505 using XDA Premium HD app

Tried mobile Odin from the play store? Then flash stock firmware from sammobile?

philliplavelle said:
Thank you for this. The file I have of the FW was downloaded from the post the first person who answered quoted. On my Mac, it's not a .zip file, it's a folder with a .tar.md5 file and another ssl one or something. Am I not able to flash these? They are not .zip. Apologies if I'm being extremely stupid.
Click to expand...
Click to collapse
Its not a meant to be flashed through recovery.... flash it using odin....donot extract it just flash it
Sent from my GT-I9500 using xda premium

Related

Desperately trying to get Fascinate unbricked!

I have a huge problem.
I rooted my wife's (yea...my wife's...) Fascinate last night. The root method I used worked like a charm. I installed ROM Manager. Again...no problem. Flashed ClockWork Mod no problem as well. I selected "reboot to recovery" to do a nandroid as I've done on numerous other phones. In fact, ALL of this I've done on numerous times on half a dozen different phones.
When it rebooted, instead of it being in Nandroid, it was in the regular stock recovery. My stomach sank...lol
It would just reboot...that's it. Is there a loop with the fascinate? How do I get out of it if so?
At one point, the phone wouldn't do ANYTHING...all that would happen when I plugged it in was a little computer and cell phone would pop up on the screen. No recovery, no nothing. So, after lots of digging and reading, I found the files here that I thought I'd need to reflash the system using odin. I got the /system file, the kernal and the recovery. I flashed the kernal...worked perfectly. Flashed the recovery...again, perfect (and recovery is back but still in a reboot loop...) When I try the .tar.md5 system file, it says md5 is invalid so I changed it to a straight .tar file and it worked all the way up to the very end, then it stops. That's it.
I just need the phone to work again for my wife. I don't care if I even flash a new custom rom (which I can't fine one of that works!) or if it's just simply restoring the stock system files.
ANY AND ALL HELP GREATLY appreciated, guys. Thanks!!
To get to cwm, you have to select "apply update.zip" from stock recovery. This is how fascinate and a few other galaxy s cwm works. Also don't ever delete the update.zip file from sd card.
But to start out....
Step 1: Start with Odin:
http://forum.xda-developers.com/showthread.php?t=782204
A. Flash system and pit together
B. Flash kernel
C. Flash recovery
*Important note: in Odin, always use PDA!!!! Using phone will cause huge issues.
Step 2: Flash cwm:
http://dl.dropbox.com/u/458252/CWMrecovery.tar
*note: this is an Odin file, again flash using PDA
Your phone will end up stock, rooted and with cwm.
That's very interesting. Here's why:
A) It tried to flash the update and the update failed.
B) My Vibrant didn't require this step.
So...as I was typing that, I had the tar.md5 downloading again. Apparently 4th time was a charm because it worked and I'm back up and running.
Thank you all SO MUCH for the STUPID fast replies. Very very cool!!!
Rooting aside if you want to just fix it, I can help you with that. Nothing more though. Interested?
Sent from my SCH-I500 using XDA App
rmp5s said:
That's very interesting. Here's why:
A) It tried to flash the update and the update failed.
B) My Vibrant didn't require this step.
So...as I was typing that, I had the tar.md5 downloading again. Apparently 4th time was a charm because it worked and I'm back up and running.
Thank you all SO MUCH for the STUPID fast replies. Very very cool!!!
Click to expand...
Click to collapse
What do you mean for the "stupid fast replies"?
tats_06 said:
What do you mean for the "stupid fast replies"?
Click to expand...
Click to collapse
I think he means that your replies were just as fast as geeknik's kernel. The only other interpretation is that although your replies were quite quick, unfortunately they were also stupid. But thats obviously not true, so it must be the former. ;-P
Sent from my SCH-I500 using XDA App
I think some of us are showing our ages, "stupid" is the new "awesome."
Sent from my SCH-I500 using XDA App
Hey dont worry i had same problem
http://www.mobilephonenews.info/and...fascinate-restore-is-it-really-that-easy.html go here and follow instructions!!!
then update phone manually to get latest update!! might take a few times or many times because it failed to get update many times but eventually youll get it!!
goodluck
Sherwood, in his case he needs all Odin files, not just system.
Fallingup was first to put this up, credit to his post!
Download:
Odin: http://dl.dropbox.com/u/458252/Odin%...in3 v1.3.exe
Odin Restore file for /system: http://dl.dropbox.com/u/458252/Odin%...System.tar.md5
Odin Restore file for kernel: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-Kernel.tar.md5
Odin Restore file for recovery: http://dl.dropbox.com/u/458252/Odin%...covery.tar.md5
PIT file for use in Odin Restores: http://dl.dropbox.com/u/458252/Odin%...00-VZW-pit.pit
Yea...I mean it's almost stupid how fast I got good, meaningful, educated replies.
In other words, you guys kick ass. Thanks again!!
similiar issue, please help me out.
spent 90% of the last few days of my life trying to "unbrick" my phone. i kno some of you will argue that its not really bricked but hell, a screen lighting up does not mean its more useful than a brick. anyway my problem is as follows:
the one and only thing my phone will boot to is download mode. absolutely no recovery. i have flashed via odin the stock modem system and recovery files countless times, sometimes successfully sometimes with error. even when doing so succesfullly the phone gains absolutely no functions. still download mode or black screen. only real thing i can mention that may have led to this issue is that i flashed stock kernel over voodoo lag fix without doing anything to it first. Please help.
Thanx
aabfalter said:
spent 90% of the last few days of my life trying to "unbrick" my phone. i kno some of you will argue that its not really bricked but hell, a screen lighting up does not mean its more useful than a brick. anyway my problem is as follows:
the one and only thing my phone will boot to is download mode. absolutely no recovery. i have flashed via odin the stock modem system and recovery files countless times, sometimes successfully sometimes with error. even when doing so succesfullly the phone gains absolutely no functions. still download mode or black screen. only real thing i can mention that may have led to this issue is that i flashed stock kernel over voodoo lag fix without doing anything to it first. Please help.
Thanx
Click to expand...
Click to collapse
sam problem here, i can get to cwm recoery and thats it. someone please help
justin94 said:
sam problem here, i can get to cwm recoery and thats it. someone please help
Click to expand...
Click to collapse
I had the same problem when I flashed the non-voodoo over voodoo and spent hours trying to fix the boot loop. I followed the instruction here http://forum.xda-developers.com/showthread.php?t=782204 but still running into the boot loop (recovery mode) then I flashed with the file from here via ODIN http://adrynalyne.us/files/kernels/DI01package3.tar.md5 and it restored my phone back to factory. From there you would have to do the root procedure again. Hope this helps.
anyone know where to get the update zip besides the dropbox link thsat has been dead forever??? every site i hunt on post that link. is there anywhere else to get it. both my pc get c++ runtime floating point errors when i open odin so i cannot flash with that. so i want to use the update zip but cannot find it
The update.zip to get to clockwork??
http://sharesend.com/g2jbl
First time I've ever hosted a file so let me know it if works lol.
Sent from my SCH-I500 using XDA App
This could be one of the rosiest phone ever to unbrick, unless you are a noon of coarse.
Sent from my DROIDX using XDA App
tswtech2 said:
anyone know where to get the update zip besides the dropbox link thsat has been dead forever??? every site i hunt on post that link. is there anywhere else to get it. both my pc get c++ runtime floating point errors when i open odin so i cannot flash with that. so i want to use the update zip but cannot find it
Click to expand...
Click to collapse
There is no update.zip method to unbrick. You will need to re-download a working copy of Odin or figure out how to make Odin work to do a factory restore with it.
Download the di01 complete package and use pda in odin to restore it.
http://forum.xda-developers.com/showthread.php?t=867648

Need help flashing CM ROM

I'm having trouble with my samsung vibrant (galaxy S) I want to flash CM on it. I have root access, Clockwork Mod recovery, and ROM Manager. I go in to ROM manager and select flash ROM from SD card, I select the CM ROM which I downloaded but it gives an error "Status 7" when trying to install, and will not flash the new ROM. Any help with this would be appreciated.
ok first go into clockwork recovery on rom manager and pick flash clockwork recovery and pick vibrantmtd then pick 3x NOT 2X! Then go to download rom and choose cm7 nightlie 8 or under as above have many probs. On ur nightlie choose all three! wipe data, wipe dalvik and backup rom. On ur second nightlie u just have to wipe dalvik and backup rom.
Thanks for the help. I tried that with a slight variation. I had to manually put the ROM on the root of the SD card and named it update.zip. I flashed clockwork recovery and selected 3.x as you said. I selected all 3 options for backup and wipe. Once in recovery I select "Reinstall packages" and it finds update.zip but aborts installation with "Status 7"
Ur doing it wrong. Update package is for only rooting ur phone.
Sent from my SGH-T959 using XDA Premium App
First root ur phone! Then follow my directions to get cm7
Sent from my SGH-T959 using XDA Premium App
the phone is rooted. Is there an easy way for me to double check that? Maybe I'm confusing two processes, but I do have the ROM on the SD card. Am I trying to apply it incorrectly? When I'm in recovery my only options are:
Reboot system now
reinstall packages
delete all user data
delete cache data
format internal SD-card
I'm used to see other option such as on my MT4G which has "install zip from SD card" That is what I typically use to flash a new rom.
Sorry if I'm missing something, but I do appreciate the help
I've been messing with it all night. I wound up doing the ODIN to JFD to get myself back to 2.1. I installed rom manager again, and it appears that when I tell it to flash clockwork mod and then reboot in to recovery I am actually going to stock recovery. I think the options that I listed earlier are for stock recovery as well. I think the main thing I'm missing is the "Install ZIP from SD Card" option in recovery. I guess at this point I'm unsure if I'm rooted, and don't know how to get the correct recovery so I can flash the ROM I'd like.
If ur recovery is blue then u need reinstall packages twice then u will be rooted, then it will turn green. Then go into rom manager and flash clock work recovery. Then put ur rom on internal sd and ur ready to flash. Enjoy
Sent from my SGH-T959 using XDA Premium App
Ok, so we can narrow things down a bit. My recovery is blue. I've downloaded the update.zip that I found from "NOOB Root guide" here on XDA, but no matter how many times I reinstall packages recovery never turns green.
I've also tried the one click root method which does the same thing as above but it just automates things a bit. (http://forum.xda-developers.com/showthread.php?t=739300)
Bump.
Many thanks to movieaddict who has helped so far, but it appears that I don't have root access, and the typical steps found in this thread are not working for me. Any other ideas?
ok is ur phone hardware locked?? by checking by doing this do the 3 button combo to get into download mode. First power off ur phone then plug in ur usb cable to phone and into pc then hold down the up volume and down volume and THEN hold down the power button and let go after a few sec u should see download mode.. If it goes into download mode then ur phone is not hardware lcked and we can go from there if it is hardware locked? then follow this link
http://forum.xda-developers.com/showthread.php?t=801722
if it isnt hardware locked then make sure update package file isnt corrrupted and make sure u put it on ur internal sd card. Make sure the update package is 632 kb sometimes when downloading stuff happens.
im gonna tell u how i do root and flash! First odin back to eclair must easier to root then. Second put the update package on ur internal sd card and dont unrar it leave it as is. Then turn off ur phone and hold down the up volume and the down volume and THEN the power button and as when u SEE THE vibrant logo let go of power button. Ur recovery will be blue then select reinstall package and select yes, it will then go through stuff and come back to recovery blue then do it again and it will turn green. Once its green then select the rom u want to flash and ur ready to go.
Thanks again. From your instructions I can tell that the phone is hardware UNlocked. I've previously gotten in to download mode. also, I see some differences in how you describe the root process. The update.zip is 633kb, I'll try to redownload it again... also, when I hit reinstall packages I am not prompted with yes/no, it just does it. It is a very quick process, and then it auto reboots the phone, but you said it should bring me back to recovery. I'm not sure why that would be happening
I'll mess around with this some more tonight. Hopefully I can nail this down. Sorry to be a PITA.
yah it should bring u back to green recovery after doing it twice! Yah that was my bad it asks u yes or no when flashing...lol!
Sent u pm!!!
Try Superoneclick root! That always works for me. When u reinstall packages and it reboots, clockwork usually has NOT been installed, I always Odin then install Tom Manager, flash Clockwork, then its off to the races!
Sent from my Htcclay's SuperVibeCM7 using XDA Premium App
Sorry Rom Manager not Tom, lol
Sent from my Htcclay's SuperVibeCM7 using XDA Premium App
I've been going over the suggestions all night. I feel like I'm following the instructions... not that they are even that difficult. I get the update.zip on my sd card, I boot in to stock recovery (blue) I reinstall packages, the phone reboots in to normal boot mode, I reboot in to recovery and reinstall packages again. I repeat this process multiple times hoping that one of these times I'm going to see a green recovery. I know it's all smooth sailing from there. I even recorded a short clip of me doing this.
http://www.youtube.com/watch?v=RPreHj16UEU
Is it possible that i've tried so many different way of doing this that I have the phone in a weird state, and now these guides aren't working due to those previous attempts? I tried super1click... wound up getting an error "Getting mount path" ... "failed"
A simple way to check for root would be to download Terminal Emulator from the market and type in "su" without the quotations. If you get $ or permission denied you are not rooted. If you get a super user prompt followed by a # you should have root. Also which rom are you on now? If you are on stock Kb5 the recovery could be giving you some issues trying to flash the CWM recovery or at least for me it did. I suggest using ODIN to go back to JFD, then using super one click root (make sure your screen is set to not go off for the 10 or 30 minute time frame) I suggest this because I have had the "failure to mount" issues many times and it only seems to happen if my phone screen goes off while attempting the root. Once super one click completes, reboot your phone, install Rom manager, then reboot into recovery. You will have to select re install packages from there. The clockwork screen will be green as a few others have stated. I have attached an image below of clockwork, mine is orange since it's cm7 but yours will look similar,but green. From here just choose install from zip sd card, choose zip and flash away. Best of luck to you!
https://picasaweb.google.com/117659...?authkey=Gv1sRgCMbSsp7F4ZHWfg&feat=directlink
Is there something that removes the root access when you reboot the phone? I flashed the recovery for Galaxy S Vibrant (NOT Vibrant MTD) and was able to get to CWR (green), but sometimes when I go in to recovery it is back to blue... if I reinstall packages it takes me to green. Along those same lines I notice SU keeps asking me if the same application can have SuperUser permissions, so it seems like something is not sticking.
are you on 2.1 or 2.2? if you'r on 2.2 and use the update.zip it wont work you have to use superoneclick root ,happened to me too.
Thanks for responding. The phone was on 2.1 because I used ODIN to go back to JFD.
I've since sold the phone (didn't care for it much) and gotten a G2X (which I'm also not wild about). Thanks for all the help everyone!

[Q] Samsung Continuum Bricked Please Help!

Hello all, I'm basically freaking out as I just got my Samsung Galaxy Continuum within the last 24hours and already managed to screw it up. I used superoneclick to root the phone with no issues. I then got Titatnium Backup and enabled the chuck norris thing to freeze bloatware. I rebooted the phone and now it says Samsung lights up the intro screen and then after that I can't see ANYTHING. Please if anyone can help I'm moving to Seattle in 2days and this will be my only source of info/communication till my things arrive 10days after me. I NEED this to work : /
Any help would be greatly appreciated.
Aaaahahaha you're so screwed. See, God is punishing you for voiding your warrenty.
I'm kidding. Try to relax. I've recovered my phone from worse than that. I'll look into it today when I get to work and see what I can come up with.
Sent from my Samsung Droid Charge 4G-LTE
Aesik said:
Hello all, I'm basically freaking out as I just got my Samsung Galaxy Continuum within the last 24hours and already managed to screw it up. I used superoneclick to root the phone with no issues. I then got Titatnium Backup and enabled the chuck norris thing to freeze bloatware. I rebooted the phone and now it says Samsung lights up the intro screen and then after that I can't see ANYTHING. Please if anyone can help I'm moving to Seattle in 2days and this will be my only source of info/communication till my things arrive 10days after me. I NEED this to work : /
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Just go into development section, find a stock odin .tar and odin itself and use it to reflash the latest stock rom. Dont panic, Its pretty hard to brick a Samsung, not impossible but pretty hard.......
Sent from my SCH-I510 using XDA App
I appreciate the quick responses, I'm honestly losing it the phone was a gift and here I am mucking it up. I would like to keep it rooted as my last phone was and never had an issue. I think the issue was somewhere with the Titanium Backup Mod. Is there anychance you could link me to this odin flash program you speak of? I'm very new to this and confused, would rather not make this problem worse. Thanks again!
Ok I have downloaded Odin3, now I just need to know how to use it and with what files to get my Continuum working again. I tried to read through some posts but everyone is so confusing >.<.
Ok so I think I did it in the correct order but, I'm still not sure I'm so lost. I go Odin3 and the .pit file for the continuum and the .tar file for CWR. I put into recovery mode or whatever with the little android guy digging, and then ran the odin program. It said it was succesful and passed but, when it rebooted itself it's the same deal. It loads up and then halfway through the intro screen it freezes and turns the screen off while the sounds finish with there little jig. I've tried to call my cell from another phone and it's acting as if it's turned off.
Aesik said:
Ok so I think I did it in the correct order but, I'm still not sure I'm so lost. I go Odin3 and the .pit file for the continuum and the .tar file for CWR. I put into recovery mode or whatever with the little android guy digging, and then ran the odin program. It said it was succesful and passed but, when it rebooted itself it's the same deal. It loads up and then halfway through the intro screen it freezes and turns the screen off while the sounds finish with there little jig. I've tried to call my cell from another phone and it's acting as if it's turned off.
Click to expand...
Click to collapse
first some questions,
did you do a nandroid backup
did you download the odin files from dj20 thread
did you download cwm recovery
and you dont really need the pit file, i been flashing files without it
Files
Aesik said:
Ok so I think I did it in the correct order but, I'm still not sure I'm so lost. I go Odin3 and the .pit file for the continuum and the .tar file for CWR. I put into recovery mode or whatever with the little android guy digging, and then ran the odin program. It said it was succesful and passed but, when it rebooted itself it's the same deal. It loads up and then halfway through the intro screen it freezes and turns the screen off while the sounds finish with there little jig. I've tried to call my cell from another phone and it's acting as if it's turned off.
Click to expand...
Click to collapse
http://dl.dropbox.com/u/20459391/SCH-i4000-VZW-Continuum.pit
http://dl.dropbox.com/u/20459391/0530_continuum_novoodoo.zip
Use this pit and this kernal in pda via Odin. Jump in the IRC for more help.
i think i bricked my continuum too. i flashed cwm recovery and got root and everything fine, then accidently flashed the wrong voodoo file and now it wont go past the samsung screen. ive looked for stock roms everywhere. how do you flash the kernel and pit. i got the pit file in but how do you select the folder for the kernel
can you still get into recovery?
VOoDOo
VooDoo convert takes a long time. Have you tried to wait it out?
Hello I too have prob. I flashed clean rom then tried to restore my nandroid backup but it says error mounting system and I cant now wont go past samsung no matter what I try?
Go to the link below. The only problem is the one-click unroot has a peculiar side-effect: it will make you believe your Continuum is invincible, and you'll try all sorts of crazy stuff with it!
http://www.addictivetips.com/mobile/one-click-unbrick-for-samsung-phones-having-odin-guide/
I forgot to mention, you need to be in download mode. Remove the battery, and hold the vol- while inserting the usb cable until the screen indicates that you're in download mode. I hope this helps!
Ok I got it to boot into clean rom again but along the way I did a system wipe so my question is how to restore backup and get apps/data back? What was I doing wrong? I have titpro and nandroid backup saved and copy of sd card on my laptop so any help is appreciated...
Sent from my SCH-I400 using XDA Premium App
nodixe said:
Ok I got it to boot into clean rom again but along the way I did a system wipe so my question is how to restore backup and get apps/data back? What was I doing wrong? I have titpro and nandroid backup saved and copy of sd card on my laptop so any help is appreciated...
Sent from my SCH-I400 using XDA Premium App
Click to expand...
Click to collapse
A nandroid backup isn't going to be much help without root. If you have it, get rooted, and flash adrynalyne's framework and cwm. Then you should be able to restore.
Ok...so I need to reroot? This why I wanted to restore it in 1st place. Su is installed and it opens from appdroor but says bin needs update but the zip wont work that it dl's to my sd? I thought root was included on clean rom? Or do I have to SOC again?
Sent from my SCH-I400 using XDA Premium App
Uh... Your restore problem is probably because your using yellow cwm... it has problems.... Im not sure if there are any other questions really xP
And read the other threads please? Everybodys already had these problems and they've been solved months ago
Sent from my Continuum Transfunctioner
nodixe said:
Ok...so I need to reroot? This why I wanted to restore it in 1st place. Su is installed and it opens from appdroor but says bin needs update but the zip wont work that it dl's to my sd? I thought root was included on clean rom? Or do I have to SOC again?
Sent from my SCH-I400 using XDA Premium App
Click to expand...
Click to collapse
You might have to SOC again. Alternatively, if you really need it, I have a DL17 ODIN bone-stock rom, both rooted and unrooted, and if push comes to shove, I can upload it and post it here.
The yellow CWM uses edify which to my understanding is only useful for 2.2 and above. You wont be able to install any zip files designed for 2.1 or before. You need the cyan version of update.zip which will allow you to reinstall the stock rom software. Send me a PM and Ill email you the proper update.zip file if you need it.
-J

bricked my galaxy note, by wiping through cwm, any chance that my pics got deleted

As above, sending my phone back after bricking it, but I have a problem I have pics and videos of me and the Mrs doing things on holiday and I'm worried they are going to be seen uploaded to the net...the the Mrs is worried.
What's the chances I'd my files being on there after a wipe through cwm?
Did you format your internal SD? That should fix any potential issue. Even though the phone is bricked you should be able to format using CWM. or else you can connect via ADB and reformat....
Yes, I think that's how I busted it to start with. There is no recovery option there any more..cwm has gone too. The only thing I can do it get it in to download mode. I tried using odin to partition the internal memory and then put stock OS on there but it gets stuck and won't put the Rom on it.
I took it back to the shop and he said they are going to send me a bag, and once they get my phone they will send me out a new one, but me and the Mrs is a little worried that they will get his of our media
Will abd let me view the file system with the phone in download mode, or with the phone being off...?
I dont think they will extract whatever is inside. They will simply replace the board and throw the damaged one in the bin.
Be careful nct time though.
Zapped through server hops to XDA forums
Hi,
Well I am sure you'd be able to flash a kernal, something like speedmod k3-3, or thor kernal. Then you should be able to get to the recovery mode.
If this fails, then you need to connect to ADB-- and it should work both in the download, and recovery modes. Then by using "parted" you can delete / create partitions. I suggest you format the SD partition (UMS).
try this http://forum.xda-developers.com/showthread.php?t=1667886 it has some of the parted commands you'd need..
BTW. do you have a yellow triangle ATM?
I need more information before I can help you, I will require a copy of each and every Picture & Video that you dont want samsung to see, Then i will fully examine it several times and we will take it from there
i have a yellow triangle but it doesnt look like the one listed as the counter for rom flashing. it says something about failed os install and to connect to kies for recovery...something along those lines, i dont have to phone handy right now.
i dont really want to flash a kernal just incase it voids the warranty and i cant fix it or send it back.
so if i format using adb everything should be wiped clean off it?
my girlfiend is pretty p!ssed with me atm whoops :crying:
nipuna said:
Hi,
If this fails, then you need to connect to ADB-- and it should work both in the download, and recovery modes. Then by using "parted" you can delete / create partitions. I suggest you format the SD partition (UMS).
?
Click to expand...
Click to collapse
Hi: Just would like to clarify one thing: adb works in recovery mode (CWM) but not in download mode. cheers.
forest1971 said:
Hi: Just would like to clarify one thing: adb works in recovery mode (CWM) but not in download mode. cheers.
Click to expand...
Click to collapse
oh crap, i dont have CWM on my phone anymore, there is no options what so ever when i turn on my device
this is the message it gives me when i try and boot into safe mode
Flash speed mod via Odin to get cwm back and try again.
Sent via carrier pigeon
Samsung has no right to even browse through your photos. Of course it happens, but it's illegal for them and if you'll find any of those pictures uploaded somewhere by them, you've got grounds to sue ( especially if they're private )
Anyway, have you tried recovery mode in Kies ? It's not the best tool, but it helps sometimes.
Atomix86 said:
Flash speed mod via Odin to get cwm back and try again.
Sent via carrier pigeon
Click to expand...
Click to collapse
what is speed mod?
Akiainavas said:
Samsung has no right to even browse through your photos. Of course it happens, but it's illegal for them and if you'll find any of those pictures uploaded somewhere by them, you've got grounds to sue ( especially if they're private )
Anyway, have you tried recovery mode in Kies ? It's not the best tool, but it helps sometimes.
Click to expand...
Click to collapse
yeah, i will give kies another shot, i was messing about last night but it was late and had to be up at 5am for work so gave up
Flash speedmod 3-3 with PC Odin.
If it's successful , boot into recovery and format sd card. (I am not sure but in speedmod recovery internal sd card is external and the other way around.)
To remove yellow triangle and flash counter , flash the Godsend Angelom kernel and wipe data/factory reset ....kaboom....! Your phone will be stone cold dead and no one can see/recover data on sd card.
would i use speed mod through PDA?
have any of you ever been through this? did you still have your media when you flashed a new kernal/rom?
Hey can ur pc still read the phone as a storage device? If so download recuva to ur pc and run a scan. Itll recover about 80% of all files u had on there
Sent from my SPH-D710 using Xparent ICS Tapatalk 2
no, it doesnt see it, if it did then i would just format it on the pc. its not that i want the files, i just dont want anyone else to have them lol
Did you delete partitions? You can flash firmware/kernal via odin. You may need to use a pit file. Or else create partitions using adb shell
Or if ur cirtain if u formatted ur sd, u can also send to sammy as is?
Sent from my GT-N7000 using XDA
mrcarlxx said:
oh crap, i dont have CWM on my phone anymore, there is no options what so ever when i turn on my device
this is the message it gives me when i try and boot into safe mode
Click to expand...
Click to collapse
It's a longshot, but try running Odin from the softbrick screen (the one with the Phone, exclamation sign and the PC). I had a guy brick a galaxy tab at work and Heimdall wouldn't finish the flash in Download Mode, but it worked at the softbrick screen. Best of luck.

[Q] S4 Bootloop, Can enter download but not recovery

Hi,
I have been searching and searching. I tried to install a kernel to my phone, its been forever so i don't remember which one.
It just reboots every 5 seconds without any screens coming up. I can not get into recovery mode
I can get into download mode and have flashed stock I337UCUAMDB_ATTAMDB_I337UCUAMDB with odin, but it doesnt fix anything.
What can I do to get to stock recovery and fix my phone?
What happens if you put it on download mode and then cancel with vol down
It falls back into the bootloop of restarting every 5 seconds with no screens coming up. No entry into recovery.
And if you pull the battery and put it back in does it try to boot?
What firmware were you on and was it loki'd if you were on mdl?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
I have taken the battery out and replaced it. It does not automatically try to boot. After pressing power it goes into the same boot cycle. Also, thank you for your quick attention!
megatilter said:
I have taken the battery out and replaced it. It does not automatically try to boot. After pressing power it goes into the same boot cycle. Also, thank you for your quick attention!
Click to expand...
Click to collapse
When did it start doing what's it's going. Did you do anything before hand? Do you know what firmware you where on before you tried odin? Was it mdb?
"What firmware were you on and was it loki'd if you were on mdl?"
Previous to my obvious blunder with the kernel download, I was using goldeneye rom from android develepment, sucessfully.
Dont know if that answers the question but i have also tried to flash AMDL with odin but have the same results.
megatilter said:
"What firmware were you on and was it loki'd if you were on mdl?"
Previous to my obvious blunder with the kernel download, I was using goldeneye rom from android develepment, sucessfully.
Dont know if that answers the question but i have also tried to flash AMDL with odin but have the same results.
Click to expand...
Click to collapse
When you used odin did you only have f.reset and auto-reboot checked and flashed the md5 file in PDA
jd1639 said:
When you used odin did you only have f.reset and auto-reboot checked and flashed the md5 file in PDA
Click to expand...
Click to collapse
I have done it multiple times, perhaps panicking, I checked the re-partition button. I have tried to get a PIT file downloaded and tried to use that.
However, this behavior was happening before I did that. It started boot looping as soon as i tried to use TWRP to flash the kernel (I know i am an idiot, and didn't read first). As soon as this started happening, that's when I immediately tried to flash AMDL (exactly as you described with only those options checked) through odin and it didn't do anything different. That's when i tried other options. I fear i may have broken my phone. Again thank you for your attention.
megatilter said:
I have done it multiple times, perhaps panicking, I checked the re-partition button. I have tried to get a PIT file downloaded and tried to use that.
However, this behavior was happening before I did that. It started boot looping as soon as i tried to use TWRP to flash the kernel (I know i am an idiot, and didn't read first). As soon as this started happening, that's when I immediately tried to flash AMDL (exactly as you described with only those options checked) through odin and it didn't do anything different. That's when i tried other options. I fear i may have broken my phone. Again thank you for your attention.
Click to expand...
Click to collapse
I think you've broken it too. Sounds like you flashed the wrong kernel and at that point you were more or less hosed. Look into jtag, mobiletechvideos.com. They can probably fix it. It'll cost you $60.00 +
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
I think you've broken it too. Sounds like you flashed the wrong kernel and at that point you were more or less hosed. Look into jtag, mobiletechvideos.com. They can probably fix it. It'll cost you $60.00 +
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
i've never seen a kernel hard brick a device or corrupt the recovery partition. i also rarely see a user flash a file and not remember what they just flashed. he/she possibly flashed an incompatible kernel or flashed a non-loki'd kernel without flashing loki-doki. either way, recovery would still be accessible to correct this issue. i feel that there is more to this.
OP, see jd's jtag post above.
megatilter said:
I have done it multiple times, perhaps panicking, I checked the re-partition button. I have tried to get a PIT file downloaded and tried to use that.
However, this behavior was happening before I did that. It started boot looping as soon as i tried to use TWRP to flash the kernel (I know i am an idiot, and didn't read first). As soon as this started happening, that's when I immediately tried to flash AMDL (exactly as you described with only those options checked) through odin and it didn't do anything different. That's when i tried other options. I fear i may have broken my phone. Again thank you for your attention.
Click to expand...
Click to collapse
Well I finally was able to get Kies working and did a firmware update. That gave me back regular recovery. Now Im stuck at bootloop att screen.
I then re flashed AMDL stock via odin and VIOLA!
Im back to stock baby!
And from there ill probably go back to Goldeneyes Rom and never think about this ever again. Thanks for your time. My phone is working again!
Also
Thank you for helping me at least by giving this thread attention. So much appreciation to the fine people here at XDA
megatilter said:
Well I finally was able to get Kies working and did a firmware update. That gave me back regular recovery. Now Im stuck at bootloop att screen.
I then re flashed AMDL stock via odin and VIOLA!
Im back to stock baby!
And from there ill probably go back to Goldeneyes Rom and never think about this ever again. Thanks for your time. My phone is working again!
Also
Thank you for helping me at least by giving this thread attention. So much appreciation to the fine people here at XDA
Click to expand...
Click to collapse
Great news! You got lucky, make sure you read and learn on xda. And always know what you flash.
megatilter said:
Well I finally was able to get Kies working and did a firmware update. That gave me back regular recovery. Now Im stuck at bootloop att screen.
I then re flashed AMDL stock via odin and VIOLA!
Im back to stock baby!
And from there ill probably go back to Goldeneyes Rom and never think about this ever again. Thanks for your time. My phone is working again!
Also
Thank you for helping me at least by giving this thread attention. So much appreciation to the fine people here at XDA
Click to expand...
Click to collapse
Care to share how you got Kies working? I have a similar problem and I can't get Kies to recognize my phone.
Fix!
So What you gota do
1. Pull Out Battery Put back in
2.Go To Download Mode
3. Download The TWRP.tar For Your Phone
4.Run Odin as Admin, Tick Pda, for pda select the TWRP.tar
5. Hit Start, Then Pull Out battery put it back in
6.Get A Micro Sd And Put The Cyanogenmod Rom, and the gapps the ones for your phone
7.Insert microsd in phone
8. Boot Recovery and go to mounts and mount the microsd
9, Go Advansed, file manager, ext sd, And Copy the cyanogenmod and the gapps to internal storage
10. Flash the cyanogen mod and the gapps. DO THIS PART CAREFULLY OR MIGHT HARD BRICK!
11. Reboot And youl boot to cyanogenmod! OH yeah! Replay if this helped or if you have any problems

Categories

Resources