I have had 3G and HSPA+ until this morning when I updated my rom from Virtuous 0.7.1 to 0.7.2
Now I can only get edge. I have tried to wipe everything and install different roms (cyanogen) still only get edge. Anyone have any idea how to fix?
ikarma said:
I have had 3G and HSPA+ until this morning when I updated my rom from Virtuous 0.7.1 to 0.7.2
Now I can only get edge. I have tried to wipe everything and install different roms (cyanogen) still only get edge. Anyone have any idea how to fix?
Click to expand...
Click to collapse
I think it's an outage. I'm not sure where you are located, but I had full 3g/HSPA+ connections until ~9:30AM. Since then, nothing but edge.
Hmm, seems to be about the time I lost 3g.... I'm in Austin.
ikarma said:
Hmm, seems to be about the time I lost 3g.... I'm in Austin.
Click to expand...
Click to collapse
I'm in Dallas. So yeah, definitely thinking it's an outage.
Double post, all the way! What does this mean!?!?!
As of ~10:10, my 3G service has been restored.
still edge here.
ikarma said:
still edge here.
Click to expand...
Click to collapse
Just went back to EDGE for me too. WTF @T-Mobile.
Just talked to someone in my area with a blackberry and he is getting 3g with no problems.
I am confused. I tried to restore an old backup and I still get edge only.
Hmm, I fixed it. I did the *#*#4636#*#* and changed to WCDMA only and then it connected to 3g. Then I switched it back to WCDMA preferred and it stayed on 3g and now I am getting a H icon. Weird why it would get stuck on Edge.
ikarma said:
Hmm, I fixed it. I did the *#*#4636#*#* and changed to WCDMA only and then it connected to 3g. Then I switched it back to WCDMA preferred and it stayed on 3g and now I am getting a H icon. Weird why it would get stuck on Edge.
Click to expand...
Click to collapse
Worked for me too! Very strange indeed.
After messing with it for a while it goes to edge and stays there. I have to leave it at CDMA Only for it to stay on 3g. :-( Whats going on???
Gotta be a service issue. I was getting it here too in south florida.
I don't think it's a service issue for me because it happened after I upgraded a rom. Right after that wifi was connected but no data. Also no 3g icon, only edge and also no data. So I flashed another rom and the data came back but no 3g.
Now I get 3g but with WCDMA only selected but it disconnects often. I verified with a friend in the area and he has no 3g problems.
Something on my phone is hosed.
Funny you say this, I was in downtown Dallas most of the morning and into the afternoon, and was getting conflicting network signals. Seemed like it was a little better on my way home back through south Dallas around 1500. I have CM, though they say its normal for it to switch back and forth.
Sent from my HTC Vision using XDA App
Hi All,
Not quite sure what happened here.. Upgraded to latest nscollab yesterday, everything was working fine. Decided to try the "Antennas" app to see if it'd show where the towers are near me, switched to 2g mode, played around with it a bit, switched off 2g mode and now my phone does not see telus at all. When I go into search networks, telus simply doesn't show up and my phone stays in emergency mode.
It sees rogers fine and is able to connect to rogers with a friend's rogers sim. I've tried my telus im in other phones and it works fine, other people's telus sims in my phone don't work either.
I've tried reverting to an earlier backup as well as going back to a stock backup. I've also tried reflashing both the kb1 and kb3 radios, no luck.
Anyone know what might be the issue here?
both Telus / Bell do not have 2G
they only have 3G, as in the VOICE only works via 3G
it was the same using the SGS i9000
Did the rogers SIM work on 2G (Edge) only? I am guessing Rogers and Fido will work, but only on 2G
Same happened to me, on Fido, my phone could no longer connect to 3G...Only 2G after playing with settings. I returned the phone
The reason why Telus-Bell SIM would not work at all at this point is that they only support 3G...
That makes sense, but i don't have it set to 2g mode anymore. It should be seeing 3g just fine.
5h4d0w said:
That makes sense, but i don't have it set to 2g mode anymore. It should be seeing 3g just fine.
Click to expand...
Click to collapse
maybe try to do a factory reset default?
in settings > privacy > format
AllGamer said:
maybe try to do a factory reset default?
in settings > privacy > format
Click to expand...
Click to collapse
Just tried that, nothing. I think that's the same as a wipe data in recovery?
I've tried:
- Reverting back to a stock backup
- Reverting to an earlier working backup
- Doing a factory reset on both of the above
- Reflashing the radio on both
5h4d0w said:
Hi All,
Not quite sure what happened here.. Upgraded to latest nscollab yesterday, everything was working fine. Decided to try the "Antennas" app to see if it'd show where the towers are near me, switched to 2g mode, played around with it a bit, switched off 2g mode and now my phone does not see telus at all. When I go into search networks, telus simply doesn't show up and my phone stays in emergency mode.
It sees rogers fine and is able to connect to rogers with a friend's rogers sim. I've tried my telus im in other phones and it works fine, other people's telus sims in my phone don't work either.
I've tried reverting to an earlier backup as well as going back to a stock backup. I've also tried reflashing both the kb1 and kb3 radios, no luck.
Anyone know what might be the issue here?
Click to expand...
Click to collapse
This just happened to me, I switched to 2G and got nothing but com.android.phone quit errors, now I can't get back on 3G. Flashed radios, data wipe, everything... wtf... it's back to stock now and still can't get on Telus... double wtf...
Christ... finally got it... my head hurts from all this reading
For some reason it was on the wrong band. Do this in dialer... *#*#4636#*#*, phone information, menu, select radio-band, USA, and should work make sure its on WCDMA preferred as well under phone information
KryPTiCk0d3 said:
Christ... finally got it... my head hurts from all this reading
For some reason it was on the wrong band. Do this in dialer... *#*#4636#*#*, phone information, menu, select radio-band, USA, and should work make sure its on WCDMA preferred as well under phone information
Click to expand...
Click to collapse
I had the same issue when in Canada, and forgot I had the band set to Europe (my region).
I set it to Automatic detect, i know catching signal will take longer. But then I dont forget
Sent from my Nexus S using XDA App
i had the same problem since may 14th (sat), thanks for the fix!!!!!!!
Same thing happened here, same solution. Glad you stumbled on it too!
As the title says, had the same problem on my Nexus S (running on Bell), I believe manually switching the 2g/3g toggle in cyanogenmod rom accidentally is what set it off.
Glad you found the solution!! Was maddening for me; knew there must be a way to fix through the UI, but until I fond it, phone was a wifi mp3 player :/
I'm running Paranoid Android 3.60 (June 15) with the latest gapps package.
I have a .33 radio and I have the correct APN settings for T-Mobile.
Everytime I enable the LTE settings, LTE doesn't pick up. (I live 20 miles from San Jose, so theoretically I should be able to get LTE). I'll just have signal bars with no data reading next to it (not even H+ or E).
Can you guys help me out?! I've been frustrated to the max that I can't get LTE to work.
ss0mohit said:
I'm running Paranoid Android 3.60 (June 15) with the latest gapps package.
I have a .33 radio and I have the correct APN settings for T-Mobile.
Everytime I enable the LTE settings, LTE doesn't pick up. (I live 20 miles from San Jose, so theoretically I should be able to get LTE). I'll just have signal bars with no data reading next to it (not even H+ or E).
Can you guys help me out?! I've been frustrated to the max that I can't get LTE to work.
Click to expand...
Click to collapse
Sounds like you don't have the APN right. You sure you saved it properly, it is selected, and you have the hyphen in fast.t-mobile.com ?
Isn't there script that needs to pushed to enable? I used negroplasty unofficial cm ROM cause I wanted to try LTE in my areas without any additional hassle cause it had everything baked in, just had to flash radio and ROM and all works fine with it.
Sent from my Nexus 4 using xda app-developers app
Verizon is at it again. When using a T-Mobile SIM in my XT1060 with 4.4.2, I'm stuck on EDGE where I'd previously get HSPA+. The APN setup has been fixed, so it no longer disappears, but it doesn't really matter if you're stuck on 2G.
4.2.2
Worked perfectly with HSPA+ and LTE
4.4
Broke APN setup
Gimped HSPA+ speeds
4.4.2
Fixed APN setup
EDGE only data
EDIT: EDGE is forced in Global mode; select LTE/GSM/UMTS and UMTS only to restore HSPA+; wait for the modem to cycle and allow the SIM to register on the network
I still have issues with HSPA+ speeds on my phone. It could be a localized issue, but I'll have to do further testing.
So, it's officially useless.
All have voice/SMS, though some had issues with voice on T-Mo's LTE.
You are the second person to report this. Could you try a factory wipe or something? I have no idea why it would be EDGE only.
I am curious what would have changed. I did compare the built in APN list between 4.4 and 4.4.2 and noticed the built in APN for T-Mobile US changed from fast.t-mobile.com on 4.4 to epc.t-mobile.com in 4.4.2 which is an older APN. Have you tried manually adding back the fast.t-mobile.com APN?
landale said:
I am curious what would have changed. I did compare the built in APN list between 4.4 and 4.4.2 and noticed the built in APN for T-Mobile US changed from fast.t-mobile.com on 4.4 to epc.t-mobile.com in 4.4.2 which is an older APN. Have you tried manually adding back the fast.t-mobile.com APN?
Click to expand...
Click to collapse
Only the unlocked phones automatically add APNs. With the Verizon XT1060, I have to manually enter the APNs, and I only use fast.t-mobile.com.
On top of the EDGE only limitation, it occasionally times out completely, so that there's no throughput up or down through the modem. It seems Verizon has completely gimped data on other carriers. I disabled the Verizon APN and APN Permissions apps, but there's something deeper that's causing this. It could be in the kernel, which wouldn't be a good thing at all.
The kicker though is (excerpt from FCC's C Block Rules):
(e) Handset locking prohibited. No licensee may disable features on handsets it provides to customers, to the extent such features are compliant with the licensee's standards pursuant to paragraph (b)of this section, nor configure handsets it provides to prohibit use of such handsets on other providers' networks.
The key words are disable features and prohibit. Technically, they aren't prohibiting access of the handset on T-Mobile's network, but they are limiting it in a way.
I got H+ with 4.4.2 on my VZW Dev X. I had to edit the APN Type setting to be default,mms,supl. The rest of the settings matched my T-Mobile Galaxy S4 LTE's APN settings. Under mobile network settings, I also have selected LTE/GSM/UMTS.
I am at the office where it is serviced by an internal antenna system, so I don't have T-Mobile LTE, and I don't think its setup for 1900Mhz UMTS, but there is a refarmed T-Mobile antenna and LTE outside.
Ok, now it switched to just bars. And back to Edge. Not sure if this is due to the internal antenna system or the update.
Voice calls (in/out) work, SMS send/receive works, MMS send/receive works, web browser works, Hangouts works.
KidJoe said:
I got H+ with 4.4.2 on my VZW Dev X. I had to edit the APN Type setting to be default,mms,supl. The rest of the settings matched my T-Mobile Galaxy S4 LTE's APN settings. Under mobile network settings, I also have selected LTE/GSM/UMTS.
I am at the office where it is serviced by an internal antenna system, so I don't have T-Mobile LTE, and I don't think its setup for 1900Mhz UMTS, but there is a refarmed T-Mobile antenna and LTE outside.
Ok, now it switched to just bars. And back to Edge. Not sure if this is due to the internal antenna system or the update.
Voice calls (in/out) work, SMS send/receive works, MMS send/receive works, web browser works, Hangouts works.
Click to expand...
Click to collapse
Keep us posted on how it progresses throughout the day.
easyxtarget said:
Keep us posted on how it progresses throughout the day.
Click to expand...
Click to collapse
I wont be able to do anything until at least tonight when I get home.
KidJoe said:
I got H+ with 4.4.2 on my VZW Dev X. I had to edit the APN Type setting to be default,mms,supl. The rest of the settings matched my T-Mobile Galaxy S4 LTE's APN settings. Under mobile network settings, I also have selected LTE/GSM/UMTS.
I am at the office where it is serviced by an internal antenna system, so I don't have T-Mobile LTE, and I don't think its setup for 1900Mhz UMTS, but there is a refarmed T-Mobile antenna and LTE outside.
Ok, now it switched to just bars. And back to Edge. Not sure if this is due to the internal antenna system or the update.
Voice calls (in/out) work, SMS send/receive works, MMS send/receive works, web browser works, Hangouts works.
Click to expand...
Click to collapse
This makes sense as the change in the default APN was the only obvious change I saw between 4.4 and 4.4.2. It's at least encouraging that you got HSPA+ to work by changing the APN. Have the others with problems tried changing or adding a new APN to match the one from the previous build? For reference here is the old and new APN information copied directly from the APN list on the Verizon Moto X.
XT1060 with 4.4 built in T-Mobile APN:
<apn auth="NONE" mmsc="http://mms.msg.eng.t-mobile.com/mms/wapenc" password="none" server="*" user="none" apn="fast.t-mobile.com" mnc="260" mcc="310" carrier="T-Mobile US" protocol="IPV4V6" mtusize="1440"/>
XT1060 with 4.4.2 built in T-Mobile APN:
<apn auth="NONE" mmsc="http://mms.msg.eng.t-mobile.com/mms/wapenc" password="none" server="*" user="none" apn="epc.tmobile.com" mnc="260" mcc="310" carrier="T-Mobile US" preloaded="true" type="default,mms,supl,hipri,fota" protocol="IP" mtusize="1440"/>
Mine is still on EDGE, and doesn't even bother going to HSPA+ even though it's in the area. Even without the APN setup, it would automatically connect to HSPA+. The speeds just wouldn't be right until you put in the APN settings.
Speedtest reported 0.01Mbps down and 0.02Mbps up, so it's definitely 2G and not a reporting bug.
Jason.DROID said:
Mine is still on EDGE, and doesn't even bother going to HSPA+ even though it's in the area. Even without the APN setup, it would automatically connect to HSPA+. The speeds just wouldn't be right until you put in the APN settings.
Speedtest reported 0.01Mbps down and 0.02Mbps up, so it's definitely 2G and not a reporting bug.
Click to expand...
Click to collapse
What do you mean without the APN setup? Just confused as to whether you are describing before on 4.4 and now on 4.4.2. I think everyone is in agreement that the APN settings for T-Mobile on 4.4.2 are wrong which is definitely part if not all of the problem since it's the most obvious change from 4.4. Have you tried adding a new APN using the settings used in the 4.4 build and selecting that as the APN to use?
landale said:
What do you mean without the APN setup? Just confused as to whether you are describing before on 4.4 and now on 4.4.2. I think everyone is in agreement that the APN settings for T-Mobile on 4.4.2 are wrong which is definitely part if not all of the problem since it's the most obvious change from 4.4. Have you tried adding a new APN using the settings used in the 4.4 build and selecting that as the APN to use?
Click to expand...
Click to collapse
As I told you before, the Verizon Moto X DOES NOT automatically add APNs. It never did on 4.2.2, 4.4, or 4.4.2. Only VZWINTERNET is ever automatically added.
I also said that I'm using fast.t-mobile.com.
It's not the APN setup. HSPA+ is disabled.
Jason.DROID said:
As I told you before, the Verizon Moto X DOES NOT automatically add APNs. It never did on 4.2.2, 4.4, or 4.4.2. Only VZWINTERNET is ever automatically added.
I also said that I'm using fast.t-mobile.com.
It's not the APN setup. HSPA+ is disabled.
Click to expand...
Click to collapse
I know what you said but you are referring to what shows on the APN list in Mobile Settings. Just because an APN doesn't show in that list doesn't mean it isn't preloaded into the phone but set to not be viewable. There is a huge list of APN's preloaded onto the Moto X for just about every major GSM carrier in the world and these are used when a SIM used when on that carrier (file pulled directly from my Moto X is attached in the zip file to this post). If the APN preloaded is wrong it will cause problems with data working. My question on you using the APN from 4.4 wasn't just the APN address of fast.t-mobile.com but also the remaining settings which matter as well such as protocol and type. I am just trying to help from my experience dealing with these sorts of issues and the fact that another user got HSPA+ to work earlier today is what made me think there might be more to it.
Anyway I should have access to a friends AT&T Nano SIM in the next day or two and since it uses the same band of HSPA+ as T-Mobile does on the Moto X I can check on that too.
landale said:
I know what you said but you are referring to what shows on the APN list in Mobile Settings. Just because an APN doesn't show in that list doesn't mean it isn't preloaded into the phone but set to not be viewable. There is a huge list of APN's preloaded onto the Moto X for just about every major GSM carrier in the world and these are used when a SIM used when on that carrier (file pulled directly from my Moto X is attached in the zip file to this post). If the APN preloaded is wrong it will cause problems with data working. My question on you using the APN from 4.4 wasn't just the APN address of fast.t-mobile.com but also the remaining settings which matter as well such as protocol and type. I am just trying to help from my experience dealing with these sorts of issues and the fact that another user got HSPA+ to work earlier today is what made me think there might be more to it.
Anyway I should have access to a friends AT&T Nano SIM in the next day or two and since it uses the same band of HSPA+ as T-Mobile does on the Moto X I can check on that too.
Click to expand...
Click to collapse
I know they're included in the build, but I've ALWAYS had to manually add the APN to get things working properly; the included APNs are usually for carrier unlocked retail phones like the XT1053. In 4.4, manually added APNs would usually disappear, but I found a workaround to make it stay. Still, HSPA+ was artificially limited (0.05-0.20Mbps down, 1.0Mbps up) just like when the APN isn't setup. Now on 4.4.2, it will only connect to EDGE, regardless.
Looking further, even when using fast.t-mobile.com, the phone forces epc.tmobile.com and EDGE only. I'm not rooted, so there's nothing I can do about it.
Jason.DROID said:
I know they're included in the build, but I've ALWAYS had to manually add the APN to get things working properly; the included APNs are usually for carrier unlocked retail phones like the XT1053. In 4.4, manually added APNs would usually disappear, but I found a workaround to make it stay. Still, HSPA+ was artificially limited (0.05-0.20Mbps down, 1.0Mbps up) just like when the APN isn't setup. Now on 4.4.2, it will only connect to EDGE, regardless.
Looking further, even when using fast.t-mobile.com, the phone forces epc.tmobile.com and EDGE only. I'm not rooted, so there's nothing I can do about it.
Click to expand...
Click to collapse
Okay that is bizarre. I just remembered one of my coworkers had a iphone 5s on t-mobile and just borrowed her SIM. I am also on a stock, non-rooted Verizon Moto X running 4.4.2 and it connected to HSPA+ immediately. I didn't even change the APN at all. I even ran a speed test and got 4.33MB down and 1.84MB up. Here is a screen shot of the status attached. Not sure why it worked for me and not for you.
Could be time for an FDR, but before that, I'm gonna try a different area of service.
I have another T-Mobile SIM that I can register as well if all else fails.
Jason.DROID said:
Could be time for an FDR, but before that, I'm gonna try a different area of service.
I have another T-Mobile SIM that I can register as well if all else fails.
Click to expand...
Click to collapse
Yeah I wish I could tell you that I did something special to get HSPA+ to work, I literally did nothing other then take out my Verizon one and put in the T-Mobile one, didn't even do a restart or change it off of Global (although I did shortly after switch it to LTE/GSM/UMTS to test that as well). The weird thing is it didn't connect to LTE at all when I know on 4.4 I could get it to connect it just wouldn't let you make calls. To be fair I didn't try much to try and get LTE to work aside from adding a new APN with the so called corrected T-Mobile LTE APN settings as my coworker wanted her SIM back. Maybe others can play around with that more.
landale said:
Yeah I wish I could tell you that I did something special to get HSPA+ to work, I literally did nothing other then take out my Verizon one and put in the T-Mobile one, didn't even do a restart or change it off of Global (although I did shortly after switch it to LTE/GSM/UMTS to test that as well). The weird thing is it didn't connect to LTE at all when I know on 4.4 I could get it to connect it just wouldn't let you make calls. To be fair I didn't try much to try and get LTE to work aside from adding a new APN with the so called corrected T-Mobile LTE APN settings as my coworker wanted her SIM back. Maybe others can play around with that more.
Click to expand...
Click to collapse
I even went into fastboot and erased the modemst1 and modemst2 again to have it reregister everything. Still nothing. Unless T-Mobile removed HSPA+ from the area around my home recently, I'd say it's the phone.
I'll keep playing with it. I'd really like the 4.4.2 flash files though just to be sure something didn't happen in the OTA update.
Jason.DROID said:
I even went into fastboot and erased the modemst1 and modemst2 again to have it reregister everything. Still nothing. Unless T-Mobile removed HSPA+ from the area around my home recently, I'd say it's the phone.
I'll keep playing with it. I'd really like the 4.4.2 flash files though just to be sure something didn't happen in the OTA update.
Click to expand...
Click to collapse
In Mobile Network settings what do you have selected under Select Network (the last option)? Do you have it on Automatic or UMTS only? Also try downloading this application https://play.google.com/store/apps/details?id=com.tapbase.LTEswitcher
Then once you have it try setting the preferred network to WCDMA only or GSM Auto and see if that helps as well.
landale said:
In Mobile Network settings what do you have selected under Select Network (the last option)? Do you have it on Automatic or UMTS only? Also try downloading this application https://play.google.com/store/apps/details?id=com.tapbase.LTEswitcher
Then once you have it try setting the preferred network to WCDMA only or GSM Auto and see if that helps as well.
Click to expand...
Click to collapse
Already tried all of that. It only connects to EDGE. I used the hidden phone settings menu to access the more advanced settings, and still no dice.
KidJoe said:
I got H+ with 4.4.2 on my VZW Dev X. I had to edit the APN Type setting to be default,mms,supl. The rest of the settings matched my T-Mobile Galaxy S4 LTE's APN settings. Under mobile network settings, I also have selected LTE/GSM/UMTS.
I am at the office where it is serviced by an internal antenna system, so I don't have T-Mobile LTE, and I don't think its setup for 1900Mhz UMTS, but there is a refarmed T-Mobile antenna and LTE outside.
Ok, now it switched to just bars. And back to Edge. Not sure if this is due to the internal antenna system or the update.
Voice calls (in/out) work, SMS send/receive works, MMS send/receive works, web browser works, Hangouts works.
Click to expand...
Click to collapse
Just as a follow up.. At home, in an area where T-Mobile has HSPA on 1900mhz, I do get H+ and even LTE (band 4) (LTE speed test screen shot -> http://mark.cdmaforums.com/X-STUFF/2014-02-27 01.47.07.png ).
When On LTE, the "bug" of making a call drops signal/service still happens.
When I keep it on UMTS and have an H+ connection, it works fine. And the connection is stable at home.
I'm attaching some shots.
And I should mention, the SIM I'm using is a T-Mobile Nano SIM that I use with an adapter in my T-Mobile Galaxy S3. I had it switched to Nano so I could also put it in my iPhone if/when needed (its a work thing).