I have a Razr M -- if there is a better place to ask this, please don't hesitate to let me know. I am new to this, but trying to learn.
I had the phone rooted and the bootloader unlocked, 4.1.2. I haven't accepted the OTA, but as you'll see below it's a pain because I've lost root and can't freeze the updater. The phone is still unlocked, and TWRP is still installed, but no root.
I had a problem with Safestrap where it would not create new ROM slots. I fixed it with a data format and factory reset. I was able to reroot with Motochopper, and then used Titanium to restore my apps. I must have restored something that the system didn't like, because I got stuck in a bootloop.
I then factory reset again, to start over. Only now Motochopper doesn't root.
I get a success message from Motochopper, Superuser does appear on the phone, but I also get the lines:
sh: /system/xbin/busybox: not found
cp: /system/xbin/su: No such file or directory
Superuser itself says that the binary needs to be updated, but none of the install options (install, recovery install) work. I tried Voodoo OTA Rootkeeper, since I had a protected SU installed, and it didn't work either.
Since I had Safestrap installed, I thought I might be able to get CMOD to a custom ROM slot even if the stock had lost root. I went ahead and created a custom ROM slot and tried to flash the Razr M CMOD 10.1 and gapps to it. I got a success message, but when I boot I just get a blackscreen; I've waited it out for 20 minutes or so, and nothing loads.
I have the Razr 1.20 utility, but frankly I am afraid to use it to try to go back to stock 4.1.2. I don't know what the OTAs have done, and frankly everything I have loaded to the M has bombed, and if I mess with my (now screwed up) stock install, I don't know that I'll be able to recover. But using the 1.20 utility and flashing 4.1.2 is my last idea.
Any help or thoughts? Why the hell did Motochopper stop working? What does this line about busybox mean? Can it be fixed short of trying to go back to stock 4.1.2?
Any help would be deeply appreciated. Because I lost root (and Titanium) I can't freeze the updater any more, which means it's now a matter of postponing every 12 hours. Not my favorite thing. And because my bootloader is unlocked I really hesitate to accept the OTA.
Since you have TWRP installed, get rid of Safestrap, you don't need it. If you're unlocked you can use Utility1.20 with no issues. If, somehow you did install the OTA, and you still have TWRP, then you just need to flash a SU zip in recovery to retain root. However, I think your best bet right now to get everything back to normal is to use the utility.
Sent from my Droid RAZR M using xda app-developers app
Many thanks. A few questions.
First, I may have misspoken, apologies -- the terminology is new to me. Safestrap has a version of TWRP, and that is what I mean when I say that I have TWRP installed. I don't have it separately installed. Does that change your advice?
Second, can I flash a zip of SU from Safestrap? Would I navigate to the Titanium Backup .zip and use the install function of Safestrap?
I deeply appreciate the advice. I may indeed have to go back to stock with the 1.20 utility, as you note.
Safestrap isn't a version of TWRP. It's based off of TWRP, but it's designed to work with a locked bootloader. Honestly, I would just use the utility and flash back to stock, re-root, and then install TWRP.
If you don't want to do this, your next step needs to be flashing TWRP, deleting and uninstalling SS, and flashing SU. You shouldn't be able to flash SU in SS. If you want to take the OTA, then you need to install an aftermarket recovery, first, so you can flash SU.
Sent from my Droid RAZR M using xda app-developers app
Related
this may have been asked, but i'm new to the nexus 7. i rooted it right away, and put TWRP on. probably shouldn't have but i like doing nandroids. i was excited for the OTA and want to just install it since my tab got it, but it won't obviously since i've got a custom recovery (duh i should've thought of that..) and i don't want to go flashing roms yet (i like keeping everything stock right away, it's so smooth)
so my question is, is there a way to go back and flash the stock recovery somehow so i can OTA, then put TWRP back on? i can't find the stock file to fastboot flash or anything
You can either download the OTA update manually and flash via TWRP. or do a full 4.2 stock ROM
http://forum.xda-developers.com/showthread.php?t=1989158
Warning: there have been mixed results from the early adopters on the OTA patch. I was running 4.1.2, TWRP, and SuperSU. I lost both SuperSU and TWRP when I upgraded and a handfull of apps are not working right with the new multi user file structure.
The way I did it was
1) Download the OTA zip from the thread I posted above
2) Moved that to SD Card (I moved via Google Drive, you can use USB if you want) I did the whole thing while waiting for a flight without a computer handy
3) Reboot to TWRP Recovery
4) Flash OTA Zip
To get Root and TWRP back I did the following (note, I have SuperSU pro and the survival mode was checked)
1) disabled SuperSU and reenabled which prompted to update Binaries
2) flashed TWRP via ROM Toolbox
kangy said:
You can either download the OTA update manually and flash via TWRP. or do a full 4.2 stock ROM
http://forum.xda-developers.com/showthread.php?t=1989158
Warning: there have been mixed results from the early adopters on the OTA patch. I was running 4.1.2, TWRP, and SuperSU. I lost both SuperSU and TWRP when I upgraded and a handfull of apps are not working right with the new multi user file structure.
The way I did it was
1) Download the OTA zip from the thread I posted above
2) Moved that to SD Card (I moved via Google Drive, you can use USB if you want) I did the whole thing while waiting for a flight without a computer handy
3) Reboot to TWRP Recovery
4) Flash OTA Zip
To get Root and TWRP back I did the following (note, I have SuperSU pro and the survival mode was checked)
1) disabled SuperSU and reenabled which prompted to update Binaries
2) flashed TWRP via ROM Toolbox
Click to expand...
Click to collapse
thanks kangy! i also lost both when i flashed.
the reason it didn't work was that i frogot i played with my build.prop and had apps frozen on titanium.
so i disabled and reenabled SuperSU, but no prompt to update.
i'm using rom toolbox now to install but it keeps telling me install failed...basically because it doesn't have root i presume. any ideas?
Alright try this.
Go to SuperSU settings and and click on Reinstall under Cleanup, it will give you a prompt and tell you it will self close and to re-install from the market. (Mine never fully uninstalled which I assume is due to it being flashed to ROM, I checked under the App manager and it only had a downgrade option so) Anywho. If it did uninstall go ahead and redownload it from the market, if it didn't check the market anyway, the Dev published and update for it to help with 4.2 multi users.
Once you get it reinstalled and/or updated from the market go back to the settings and Toggle off Enable Superuser, close the app, re-open and then re-enable superuser. You probably will want to give it a reboot at this point. (Ive restarted my device a hundred times since going to 4.2 from trying to work through the bugs. Once you restart test a root app. I used Adaway for the test. Important, if the app fails or gives an error about not having root, try again. After I went through all of those motions SuperSU was pretty slow for a while with giving root access, usually the second request from the app wakes it up. Since then though it is back to being snappy with zero lag.
Yes, the reason you can't flash TWRP through ROM Toolbox is that requires root. Once you get your SuperSU working try flashing the latest TWRP again, it should only take a few seconds to flash. Let me know how it goes, I'm subscribed to the thread. I may not be the smartest guy on XDA but you are in the same exact boat I was last night!
jayochs said:
thanks kangy! i also lost both when i flashed.
the reason it didn't work was that i frogot i played with my build.prop and had apps frozen on titanium.
so i disabled and reenabled SuperSU, but no prompt to update.
i'm using rom toolbox now to install but it keeps telling me install failed...basically because it doesn't have root i presume. any ideas?
Click to expand...
Click to collapse
First, determine if you have root or not. Open TiBackup, if it opens correctly and you can see all your apps listed, you have root. Otherwise it will say "Failed to obtain root," and quit.
If you have root, then great. If not, you can flash the SuperSU zip in TWRP/CWM: http://download.chainfire.eu/282/SuperSU/CWM-SuperSU-v0.98.zip
I haven't tried flashing superSU, I've always flashed Superuser zip [google "superuser zip"], and then installed superSU from Play store.
Once you have root..
Go to Settings > Security and check allow installation from non-market apps, and uncheck the security feature that checks all apps for being malicious.
Then try it. If you still cannot restore apps, you might have to install them with adb.
I just updated someone's N7 to 4.2, and as usual I backed up everything in TiBackup.
Then I backed up the TitaniumBackup directory [because I had to do a full factory reset].
I then extracted all the .apk.gz files with gunzip. [in linux OR adb: $ gunzip *.apk.gz -- for windows, I suppose you would have to use 7-Zip].
Then I tried to install with pm:
Code:
for i in *.apk; do pm install $i; done
But every one was giving me an error, INSTALL_FAILED_INVALID_URI, I couldn't figure it out. Found a thread said to chmod 755 /data/local, but that did not fix it.
So what I had to do, was on my linux PC:
Code:
for i in *.apk;
do adb install "$i"
done
So I finally was able to batch install my apk files.
after that I restored all apps data.
Nandroid back ups not possible after 4.2 update
After updating my rooted N7 to 4.2 OTA I re-rooted using Wug's Nexus Root Toolkit 1.5.5 and realized that Nandroid back ups are failing.
I had no problem creating such back ups while on 4.1.2 and using his Toolkit 1.5.3. I guess the reason may be that the 1.5.5 Toolkit does not have the latest build incorporated.
Yordan5 said:
After updating my rooted N7 to 4.2 OTA I re-rooted using Wug's Nexus Root Toolkit 1.5.5 and realized that Nandroid back ups are failing.
I had no problem creating such back ups while on 4.1.2 and using his Toolkit 1.5.3. I guess the reason may be that the 1.5.5 Toolkit does not have the latest build incorporated.
Click to expand...
Click to collapse
why are you even using a toolkit? it's a nexus!...
Root by flashing Superuser zip or superSU zip in CWM/TWRP.
Make nandroid backups in CWM/TWRP, and you should have no problem.
mvmacd said:
why are you even using a toolkit? it's a nexus!...
Root by flashing Superuser zip or superSU zip in CWM/TWRP.
Make nandroid backups in CWM/TWRP, and you should have no problem.
Click to expand...
Click to collapse
NRTK 1.5.5 would not flash the 4.2 custom rom I fed it either. Just kept stalling out with errors that it could not find the zip file.
So I booted into TWRP and flashed it with no problem at all.
I also did backup in TWRP and checked everything but saw no mention that is was a Nandroid backup. How can I be sure?
i'm trying to nandroid back to a 4.1.2 nandroid i have, problem is, twrp has different directories for nandroids in 4.2 than 4.1.2...so it can't find the old nandroids and i can't find the 4.2 dir where twrp stores them now. ugh. such a damn headache for an update that it turns out i didn't want lol
Read my post below, I was having the same problem but got back on 4.1.2. You have to use the twrp explorer and relocate the twrp files since 4.2 moved them.
http://forum.xda-developers.com/showthread.php?t=1992552
Nandroid Downgrade from 4.2 to 4.1.2
Sent from my Nexus 7 using Tapatalk 2
For some reason I seem to have lost root. I think this may have occured when I updated to 4.2.2, it automatically asked to update OTA. That or this occured from updating SuperSU.
When I try to go into recovery mode I see a android laying down with an exclamation point on his belly. I can't get into TWRP recovery.
SuperSU gives the error "There is no SU binary installed and SuperSU cannot install it"
I tried opening up titanium backup, and it says I have no root.
The fastboot states me phone is unlocked.
I have no issues rerooting, but I'm wondering:
a) Why and how this happened? Was it from the OTA update?
b) How I can prevent this in the future
c) Can I still back things up before rooting?
d) Will I lose everything when trying to root again?
AAhrens said:
For some reason I seem to have lost root. I think this may have occured when I updated to 4.2.2, it automatically asked to update OTA. That or this occured from updating SuperSU.
When I try to go into recovery mode I see a android laying down with an exclamation point on his belly. I can't get into TWRP recovery.
SuperSU gives the error "There is no SU binary installed and SuperSU cannot install it"
I tried opening up titanium backup, and it says I have no root.
The fastboot states me phone is unlocked.
I have no issues rerooting, but I'm wondering:
a) Why and how this happened? Was it from the OTA update?
b) How I can prevent this in the future
c) Can I still back things up before rooting?
d) Will I lose everything when trying to root again?
Click to expand...
Click to collapse
Just reflash the superSU.zip from here http://download.chainfire.eu/315/SuperSU/UPDATE-SuperSU-v1.25.zip in CWM and you should be rooted again. You will not loose any data so no need to backup. Download OTA Rootkeeper from Play to regain root after installing future OTA`s.
I'm not using CWM, I'm using TWRP and I can't seem to boot into it.
AAhrens said:
I'm not using CWM, I'm using TWRP and I can't seem to boot into it.
Click to expand...
Click to collapse
Try cmd and type: adb reboot recovery. If you see the androidian (stock recovery) you have to reflash the TWRP img file in fastboot mode.
Will this reset my phone? Or does only rooting do that?
You will not loose any data.
Sent from my Nexus 4 using xda premium
AAhrens said:
For some reason I seem to have lost root. I think this may have occured when I updated to 4.2.2, it automatically asked to update OTA. That or this occured from updating SuperSU.
When I try to go into recovery mode I see a android laying down with an exclamation point on his belly. I can't get into TWRP recovery.
SuperSU gives the error "There is no SU binary installed and SuperSU cannot install it"
I tried opening up titanium backup, and it says I have no root.
The fastboot states me phone is unlocked.
I have no issues rerooting, but I'm wondering:
a) Why and how this happened? Was it from the OTA update?
b) How I can prevent this in the future
c) Can I still back things up before rooting?
d) Will I lose everything when trying to root again?
Click to expand...
Click to collapse
Let me guess, you used a toolkit to root?
a) You did the full OTA, so you lost your custom recovery.
b) flash images through fastboot and skip the recovery.
c) Only after you flash a custom recovery. If your recovery is sitting in the same folder as fastboot and named "recovery.img, simply cd into the fastboot folder in a command prompt and type
fastboot flash recovery recovery.img
d) Not unless you lock or relock your bootloader.
OP, you need to do some more research and uninstall the toolkit from your computer. You know just enough to cause yourself problems, but not enough to know why they happen or how to fix them.
Yes the OTA update got rid of the files or partition that is created in order for you to have root access. Your custom recovery was also replaced with the stock recovery (android lieing on its back with red triangle).
To prevent you being unrooted in updates you can try using OTA RootKeeper available on Google play but this is not guaranteed to work.
You can use carbon to back up your data as this does not require root access to work.
And no you will not lose your data if you re root again, this is only done when you unlock the bootloader.
Rizy7 said:
Yes the OTA update got rid of the files or partition that is created in order for you to have root access. Your custom recovery was also replaced with the stock recovery (android lieing on its back with red triangle).
To prevent you being unrooted in updates you can try using OTA RootKeeper available on Google play but this is not guaranteed to work.
You can use carbon to back up your data as this does not require root access to work.
And no you will not lose your data if you re root again, this is only done when you unlock the bootloader.
Click to expand...
Click to collapse
Thanks all, was able to get it fixed by re-rooting!
I have CWM installed, but I am running stock, no root. I got the 5.0.2 update today and told it to apply. Didn't pay close enough attention on reboot, was asked something about applying something in recover and don't remember if I said yes or no, then prompted for adding root (both of those were in CWM Recovery) and I know I said no to root. After the reboot I was still running 4.4.4.
So I guess I am ready to just manually download and install. Can anyone help me make sure which thread I should be looking at for instructions? I just feel like I have looked at everything and am not confident I am doing the right things. Can I just download the image linked in the Stock OTA URLs thread, then install from recovery?
Installed CWM without Root? :/
Sent from my SM-N9005
Hello everyone,
this is my first time posting on the XDA forums after doing a lot of research, so please bear with me if I've missed something painfully obvious. My issue I'm looking to get help with is my AT&T GS4 i337.
Here goes the problem, initially I had the FNJ4 (4.4.4) baseband and build number. I was really excited to try custom ROM's like CM11 or 12. I ended up reflashing the phone via odin with baseband and build number FNB1 with a rootable kernel (titled I337UCUFNB1_TWRootable_Full_Odin.tar 4.4.2). This successfully worked as did using TowelRoot (v3) to root. Since the reflash, I cannot seem to load CWM or TWRP much less access even the factory recovery mode on startup (it goes to the "unable to boot into normal mode" screen). And today, I was messing around with the "Disable Service" app and accidentally unchecked the box to turn off the service for SuperSu (even though I re-checked the box, I still lost root). And now I cant even run the tr.apk file to successfully root again - what I mean is the tr.apk installs and says I have root, but then when I check the root with root checker basic it says the phone has not been successfully rooted.
On a side note, I did find a flashable recovery .zip version of SuperSu (2.46) app to get the app back except now, shortly after startup, the app service turns itself off and I loose SuperSu again. I really don't know what to do.
I have tried messing with Terminal Emulator, Flashify, TWRP manager, ROM manager, ODIN and Titanium Backup to try and get SuperSU (to get root) and the factory recovery mode back (I also tried using Safetrap to install CWM and TWRP without success). The only program I haven't messed with is flashing with Heimdall. Oh yeah, I also tried using SELinux Mode Changer (changed mode to permissive) without any success.
I know this is getting super long, but my initial intent was just to be able to run CM11 or CM12 and customize the phone the way I want it. Any help would be greatly appreciated as I'm not sure how to prioritize these problems.
The bootloader of the AT&T S4 SGH-I337 is locked. This means you can not install a custom kernel or a custom recovery, and thus you are limited to touchwiz based firmware. You can have custom firmware based on touchwiz, however, you will not be able to have CyanogenMod or any other aosp based firmware.
I would suggest that you repeat the process: flash stock NB1, the rootable kernel, root with towelroot, and install SuperSU as you did before, and then depending on where you want to end up, install safestrap or upgrade to Lollipop with the keeproot method. Look in the general forum for threads by guut13 and muniz_ri.
creepyncrawly said:
The bootloader of the AT&T S4 SGH-I337 is locked. This means you can not install a custom kernel or a custom recovery, and thus you are limited to touchwiz based firmware. You can have custom firmware based on touchwiz, however, you will not be able to have CyanogenMod or any other aosp based firmware.
I would suggest that you repeat the process: flash stock NB1, the rootable kernel, root with towelroot, and install SuperSU as you did before, and then depending on where you want to end up, install safestrap or upgrade to Lollipop with the keeproot method. Look in the general forum for threads by guut13 and muniz_ri.
Click to expand...
Click to collapse
Got it. Thank you very much for responding so quickly! I'm new to this whole thing (the world of installing custom ROM's and the like) and I'm finding that so many details (Root/firmware/baseband/kernel/ROM compatibility) are so much more dependent on carrier and model number than I ever imagined. Thank you for pointing me in the right direction by helping me understand my limitations. Now its time to do a little more research.....
There are a few threads that deal with upgrading lollipop to marshmallow, but they seem to raise as many questions as they answer - mainly since they were usually written before rooted images were distributed.
Basically, I am on an unlocked, rooted stock XT1575 with TWRP 2.8.7.0. It sounds like it's less efficient and has lots of potential problems to go back to stock, unroot, install OTA, do new system root, and re-add TWRP.
Instead, it sounds like the simplest method to get to stock rooted MM, with least steps and potential problems, should be this:
Update TWRP to 2.8.7.1 using IMG file here from within TWRP Recovery (TWRP Manager did not install it when I tried via Android proper - I was still at 2.8.7.0)
Do a full TWRP backup of my current Lollipop stock rooted installation (I assume this means I can restore without problems if the MM install goes awry)
*Optional: Use Titanium Backup to backup settings of important apps, and text messages/MMS.
In TWRP, Wipe->Swipe to Factory Reset
Transfer to phone and Flash via TWRP the stock rooted odexed ROM from this thread (not sure if there is a good argument for deodexed? I've never gotten a clear answer why one should be better, but would stick with odexed just because I believe it is "stock" so maybe less problems?)
Install SuperSU 2.62 from this thread by simply flashing it as normal in TWRP 2.8.7.1.
Reinstall all programs on initial setup. [*Optional: Reinstall via Titanium backup]
I assume if I do this I will: have marshmallow; have root; have working TWRP.
Does anyone see any obvious problems with this method? Thanks, I really appreciate any comments.
EDIT: Yes, I tried this method. It all worked, except I've added SuperSU installation steps that worked for me, since the "Stock Rooted" ROM is NOT actually rooted when I flash it. Also, used Titanium Backup successfully for some programs, so added that as an option.
Sorry to bump, but any response from someone with experience would be very helpful. I just want to make sure I don't have to go through the whole unroot/OTA/reinstall TWRP/reinstall root procedure that every thread says seems to cause problems...
Answered my own question - edited the main post to show the method used successfully.
Thank you for this answer thread. I was looking for the simplest answer for upgrading to MM without having to unroot and reflash everything. Looks like this is the easiest for now (I have having to reinstall everything, since some games I play to NOT react nicely to data being restored via titanium).
Have a brand new XT1575 with 5.1.1, Does the MM Update break root ability. I primarily want it for xposed, adaway. No ROMing
Should I update and then root? or root and then update?
I personally have found that following this method breaks root possibilities. MM is rooted, but when I got to the point of installing SuperSU via these steps, it broke EVERYTHING (settings stopped working, Motorola Services stopped working, etc).
I have to start from scratch again now.