Here is the CWM 6.0.3.3 for Lava Iris 504Q
Requirements:
1. Sp Flash Tool
2. Recovery.img
3. MT6589_Android_scatter_emmc.txt (only use this one. it is modified.)
Very Easy & safe way to FLASH CWM RECOVERY Without having PC
steps:->
1. Downlaod CWM Recovery extract it and copy recovery.img only to root of your SD Cards
{ i.e. sdcard/recovery.img or sdcard2/recovery.img }
2: download Mobile Uncle Tools for MTK http://d-h.st/yco and install it as normal apps
3. Now open Mobile Uncle Tools apps you recently installed.
4. grant Superuser permissions
5. There click on recovery update menu
6. Then click on the recovery image name of ‘ recovery.img ’
7. Let the app install the recovery. after that apps ask you for reboot your device in to recovery?. press yes
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download: CWM 6.0.3.3 for Lava Iris 504Q
http://d-h.st/nIR
Download: Sp Flash Tools For Mediatek phones
http://mtk2000.ucoz.ru/down7/FT3.13.04.rar
Download: MT6589_Android_scatter_emmc.txt
http://d-h.st/Paz
Instructions for flashing using SP Flash Tools:
1. Install drivers for your phone http://forum.xda-developers.com/atta...0&d=1373524210
2. Copy recovery.img and scatter file in new same folder
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt
5.Check only recovery.img, uncheck all others. (will be checked auto)
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
8. Put Battery and Connect usb to your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
Warning 1 - Don't interrupt this process as it can potentially brick your device.
Warning 2 - Make sure no power interruption takes place. (Use a laptop to ensure this).
9. After the process completes, a green ring will appear on your device signalling that the process was successful.
10.Disconnect your phone.
Thats all
Press volume Up and Power same time to get in to CWM
Credits
THL W8- Base Recovery
XDA
it will be of great help if u can upload the stock rom for this set as i tried to install canvas 4 hd's rom and now my phone is in bootloop.plz help me.
There is an OTA update for lava iris 504Q 69MB...did anyone update? any change logs??
manikkumar20 said:
There is an OTA update for lava iris 504Q 69MB...did anyone update? any change logs??
Click to expand...
Click to collapse
Stuck at 62 Mb . can't download
Sent from my iris504Q using xda premium
fandroid7 said:
Stuck at 62 Mb . can't download
Sent from my iris504Q using xda premium
Click to expand...
Click to collapse
Oh ok i am doing an Online Nandroid Backup now...then i ll try to update it....
If u succeed update the new changes..
Thanks
---------- Post added at 10:56 AM ---------- Previous post was at 10:14 AM ----------
fandroid7 said:
Stuck at 62 Mb . can't download
Sent from my iris504Q using xda premium
Click to expand...
Click to collapse
If u want i have the Update.zip file with me...i can share that file if u r unable to update OTA...
manikkumar20 said:
Oh ok i am doing an Online Nandroid Backup now...then i ll try to update it....
If u succeed update the new changes..
Thanks
---------- Post added at 10:56 AM ---------- Previous post was at 10:14 AM ----------
If u want i have the Update.zip file with me...i can share that file if u r unable to update OTA...
Click to expand...
Click to collapse
What's new in this update.zip
Sent from my iris504Q using xda premium
fandroid7 said:
What's new in this update.zip
Sent from my iris504Q using xda premium
Click to expand...
Click to collapse
I don't know what's new....but its the official OTA update from lava..68.59 mb...
How to OTA update as i checked no update available .
setting-about phone-check for update- "your mobile is uptodate"
manikkumar20 said:
Oh ok i am doing an Online Nandroid Backup now...then i ll try to update it....
If u succeed update the new changes..
Thanks
---------- Post added at 10:56 AM ---------- Previous post was at 10:14 AM ----------
If u want i have the Update.zip file with me...i can share that file if u r unable to update OTA...
Click to expand...
Click to collapse
Bro, can you please upload. I badly need this.please help.. Please
---------- Post added at 06:53 PM ---------- Previous post was at 06:51 PM ----------
Ho mani. Many thanks I cwm my phone great help to the community. Pressed thanks!!!!!!
manikkumar20 said:
I don't know what's new....but its the official OTA update from lava..68.59 mb...
Click to expand...
Click to collapse
Why can't I see any ota update available for 504q
Setting--about phone--software update--check for update--Your phone is up to date
??
here is available the stock version before the OTA updates
http://www.moulnisky.com/index.php?dir=Lava/IRIS504q/
BR
Alex
How should I enable the ota update?
Right now I am in stock ROM rooted. Somebody please help.
Sent from my iris504Q using xda app-developers app
Backups are getting stored in internal instead of external memory. How to fix this?
Sent from my iris504Q using xda app-developers app
Just backup to external when choosing backup
Sent from my iris504Q using xda premium
Why no custom ROMs available?
There was a touchwiz s4 ROM but now the thread has locked and links were removed.
Sent from my iris504Q using xda app-developers app
moulnisky said:
here is available the stock version before the OTA updates
http://www.moulnisky.com/index.php?dir=Lava/IRIS504q/
BR
Alex
Click to expand...
Click to collapse
Nice work
Please help we cannot see any ota update after flashing with your stock rom
Nice work thanks
Sent from my COLOSSUS Ver 4.0.0507 using XDA Premium 4 mobile app
CWM 6.0.4.3
fandroid7 said:
Just backup to external when choosing backup
Sent from my iris504Q using xda premium
Click to expand...
Click to collapse
Hey, can you please let us know how to update CWM from the current version to 6.0.4.3 ??? .
Thanks in advance
Related
If anyone can do it please do it as fast as you can
Sent from my LG-P700 using xda app-developers app
I'm waiting for the rooted version..
fox.not.fire said:
I'm waiting for the rooted version..
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?showtopic=446160&st=2380#entry21916179
Credits to russians :laugh:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Amazing result!
Yup I just got the new Rom really amazed
Sent from my LG-P700 using xda app-developers app
So I just flash it through kdz like stock firmware ?
acheron350 said:
So I just flash it through kdz like stock firmware ?
Click to expand...
Click to collapse
Yes
Sent from my LG-P700 using xda app-developers app
It's really fast and I prefer it over an unstable CM10.
Wazzim said:
It's really fast and I prefer it over an unstable CM10.
Click to expand...
Click to collapse
How about the memory we're used or consumed?
Sent from my LG-P700 using Tapatalk 2
How to root 20d without flashing new kdz?
Sent from my LG-P700 using xda app-developers app
Gusta_HR said:
http://4pda.ru/forum/index.php?showtopic=446160&st=2380#entry21916179
Credits to russians :laugh:
Click to expand...
Click to collapse
Witch is the difference between the first one and the second? i see that on the second is deodex (what is that?)
Can i install the ROM with the ClockworkRecovery-install ROM from sdcard? or do i have to make it with the computer and in that emergency mode like i did for the V20A?
Files .kdz can install in KDZ, but if you want install in recovery, you must have file .zip.
Deodexed ROM don't have odex files. You can modify the look of your phone etc.
Odexed ROM is better because have more space data partition and first boot is faster.
ok. thanks a lot man!
vaikz said:
How about the memory we're used or consumed?
Sent from my LG-P700 using Tapatalk 2
Click to expand...
Click to collapse
I want to know also.
Sent from my LG-P700 using Tapatalk 2
I recently recived an update from the Software Update. The Software version was V20d-MAY or something like this. I normally downloaded the update and befor install, it had to restart the phone. Then it came the normal LG logo and then it came this: what should i do? (i was using the V20A with root, by Homero)
http://s1.directupload.net/images/130512/qz69e4ci.jpg
I tryed to select Install zip from sdcard-apply /sdcard/update.zip
but i got this:
http://s7.directupload.net/images/130512/22snma9b.jpg
Claudiu678 said:
I recently recived an update from the Software Update. The Software version was V20d-MAY or something like this. I normally downloaded the update and befor install, it had to restart the phone. Then it came the normal LG logo and then it came this: what should i do? (i was using the V20A with root, by Homero)
http://s1.directupload.net/images/130512/qz69e4ci.jpg
I tryed to select Install zip from sdcard-apply /sdcard/update.zip
but i got this:
http://s7.directupload.net/images/130512/22snma9b.jpg
Click to expand...
Click to collapse
What you are seeing is ClockWorkMod bootloader.... it only installs with modified KDZs or if you installed it directly (must have come with Homero's V20A.....
If you want V20D, it's better to reflash the new v20D KDZ (there are ones with root and Clockworkmod and without it)... look for the files in the P700 development thread.
---------- Post added at 04:54 AM ---------- Previous post was at 04:51 AM ----------
vaikz said:
How about the memory we're used or consumed?
Sent from my LG-P700 using Tapatalk 2
Click to expand...
Click to collapse
In my case it is about 90mb left WITH Facebook/Whatsapp services... pretty good since V20B left me with 30-40mb with those services loaded.
vasquezalonso said:
What you are seeing is ClockWorkMod bootloader.... it only installs with modified KDZs or if you installed it directly (must have come with Homero's V20A.....
If you want V20D, it's better to reflash the new v20D KDZ (there are ones with root and Clockworkmod and without it)... look for the files in the P700 development thread.
---------- Post added at 04:54 AM ---------- Previous post was at 04:51 AM ----------
In my case it is about 90mb left WITH Facebook/Whatsapp services... pretty good since V20B left me with 30-40mb with those services loaded.
Click to expand...
Click to collapse
ahm... how do i reflash? i just want the V20D rooted. but im nub in those things
Claudiu678 said:
ahm... how do i reflash? i just want the V20D rooted. but im nub in those things
Click to expand...
Click to collapse
Ok man, I'm in the mood to help....
Download this file... (rooted V20D with Clockworkmod)
https://disk.yandex.com/public/?hash=dqVNYlyXJYcyFKGnrD3C+052iazaQYnTr6mWL4aWxHs=
(if download is slow create Yandex account and save file to your Yandex disk... download will be faster)
Flash the kdz with the phone in emergency mode (remove battery, press Volume up and while pressing, connect the phone... you should see a yellow screen)... If this is not working, there are a lot of tutorials out there). I guess since you flashed v20A, you know how to flash a KDZ.
If the flashing works (it will take some minutes if it is working, even if after all an error appears), your phone should restart. Just put in your battery and now you have V20D
Off to sleep. It's 5am here.
vasquezalonso said:
Ok man, I'm in the mood to help....
Download this file... (rooted V20D with Clockworkmod)
https://disk.yandex.com/public/?hash=dqVNYlyXJYcyFKGnrD3C+052iazaQYnTr6mWL4aWxHs=
(if download is slow create Yandex account and save file to your Yandex disk... download will be faster)
Flash the kdz with the phone in emergency mode (remove battery, press Volume up and while pressing, connect the phone... you should see a yellow screen)... If this is not working, there are a lot of tutorials out there). I guess since you flashed v20A, you know how to flash a KDZ.
If the flashing works (it will take some minutes if it is working, even if after all an error appears), your phone should restart. Just put in your battery and now you have V20D
Off to sleep. It's 5am here.
Click to expand...
Click to collapse
I did how you told me, i think that its installed, on the computer was writen FINISHED and now i got this screen on my phone:
http://s14.directupload.net/images/130512/iraenfow.jpg
What should i do?
Claudiu678 said:
I did how you told me, and now i got this screen on my phone:
http://s14.directupload.net/images/130512/iraenfow.jpg
What should i do?
Click to expand...
Click to collapse
If you are in cwm, wipe data, cache and davlik. Then restart system, I assumed you already done flashing. If not, enter emergency mode following the instruction above your post.
Sent from my LG-P700 using Tapatalk 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
Credits:
Code:
Rajit , Yuweng , Lewatek , Amoi N828 Official Lewa Developers , Dsixda , Members of Our FB Group
Screenshots:
Visit here for More Screenshots
Downloads:
⇝ LeWaOS Stable 14.01.10
⇝ LeWaOS 14.03.14 Developer Edition
↪Update-14.03.21{Flash Over 14.03.14 Dev Edition}
↪Update-14.03.28{Flash Over 14.03.21}
↪Update-14.04.04{Flash Over 14.03.28}
↪Update-14.04.18{Flash Over 14.04.04}
Addons:
⇝ Light Gapps for 4.2.1 Roms by Me {Only Playsore, Gmail and Google Search} - http://d-h.st/eOW
Instructions:
⇸Make sure you have installed Q700i firmware already. details on installing Q700i fw
⇸Download the rom from provided link and copy to your sdcard
⇸Reboot into recovery
⇸Select wipe data/factory reset, go to advanced and wipe dalvic
⇸Install the rom zip from sdcard
⇸Only Wipe Cache while Installing Updates.
Few Things Worth Seeing:
☛ What's Difference Between Stable and Developer Edition?
⇛ Developer Edition Get frequent Updates but it is Advised to Use Stable Edition instead.
☛ When Will I Get Next Update?
⇛ I Don't Know, Whenever I feel a Need. Developer Edition Will Get Monthly Updates.
☛ I Got A Bug in this Rom, Solve that Quickly.
⇛ I Got Lot of Other Things To Do Also, Report Bugs Politely in This Thread. I Will try to Solve them ASAP.
☛ Is Lewa OS Better than MiUi ROM?
⇛ I Don't Know, It Depends On personal Choice. Try It YourSelf and Find Out.
☛ I Loved this ROM, How Can I Support You?
⇛ If You Liked My Work, then You Can Use Thanks Button and Also Rate the Thread.
Changelogs
#Reserved
looks nice.. waiting for the download links! will be happy to test it out and re-upload it to another server..
After installing Q700i firmware, it is necessary to root and install CWM for flashing your rom ?
Thanks in advance...
Where is the downlo
ading link ?
Sent from my Nexus 4 using Tapatalk 4
link added
Sent from my Xolo Q700 using Tapatalk 4
hemal_4404 said:
After installing Q700i firmware, it is necessary to root and install CWM for flashing your rom ?
Thanks in advance...
Click to expand...
Click to collapse
No, root isn't required just flash the ROM zip via cwm recovery.
Download link will be added soon.
Sent from my Xolo Q700 using Tapatalk 4
If you have a problem with speeds, you could share it with me via p2p or anything you like and I can upload it for you on different hosting sites..
abhinav2hd said:
No, root isn't required just flash the ROM zip via cwm recovery.
Download link will be added soon.
Sent from my Xolo Q700 using Tapatalk 4
Click to expand...
Click to collapse
here's another upload link - http://d-h.st/fK4
btw, I've flashed your ROM a few mins back.. good work!
I'll use it for some time and report back if there are any bugs..
2kool2btrue said:
here's another upload link - http://d-h.st/fK4
btw, I've flashed your ROM a few mins back.. good work!
I'll use it for some time and report back if there are any bugs..
Click to expand...
Click to collapse
Will add your devhost link to download section. and waiting for ur review.
Sent from my Xolo Q700 using Tapatalk 4
abhinav2hd said:
Will add your devhost link to download section. and waiting for ur review.
Sent from my Xolo Q700 using Tapatalk 4
Click to expand...
Click to collapse
sure thing.. add this link too.. I'm not sure if you received my previous PM - http://uppit.com/vut6324wgt9o
Anyone tested ?
Sent from my Nexus 4 using Tapatalk 4
---------- Post added at 06:57 PM ---------- Previous post was at 06:41 PM ----------
Op
Why flashing q700i rom is must ?
Sent from my Nexus 4 using Tapatalk 4
rjunraj said:
Anyone tested ?
Sent from my Nexus 4 using Tapatalk 4
---------- Post added at 06:57 PM ---------- Previous post was at 06:41 PM ----------
Op
Why flashing q700i rom is must ?
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
because q700 has emulated storage which cause problem in mounting storage in ported roms, that's not the case with q700i firmware, that's why i am porting roms on base of Q700i.
abhinav2hd said:
because q700 has emulated storage which cause problem in mounting storage in ported roms, that's not the case with q700i firmware, that's why i am porting roms on base of Q700i.
Click to expand...
Click to collapse
Thanks
Sent from my Nexus 4 using Tapatalk 4
Nenamark 2 - 54.8-55 fps
Quadrant - 4125
btw, can you try and make the background of icons transparent? would look much more elegant that way..
2kool2btrue said:
Nenamark 2 - 54.8-55 fps
Quadrant - 4125
btw, can you try and make the background of icons transparent? would look much more elegant that way..
Click to expand...
Click to collapse
try to search in themes or use different launcher with your desired kind of icon packs.
abhinav2hd said:
try to search in themes or use different launcher with your desired kind of icon packs.
Click to expand...
Click to collapse
I've tried themes but that didn't help.. I can use apex to offset the icon problem but it still appears in the notification bar that way. Also, I'm trying to use GoLauncher EX as it suits MIUI/Lewa better than others. Just my opinion though.
Hi guys...
Wanna deodex your firmware even you have device with locked bootloader
I was trying to deodex my KK ROM but couldn't becouse we have problems with mounting system in recovery...
I tried absolutely everything I could remember but..without any luck.
Then I remembered one cool trick...
So what I did...and you should
Read careful :
1. Flash firmware .534 (yes..again) with flashtool
2. Root and flash recovery
3. Flash 681 firmware by NUT prerooted - through recovery NUT flashable ROM
DON'T RESTART OR POWER OFF DEVICE - HIT BUTTON "HOME"
4. Flash Krab deodex patch DEODEX patch
- You can flash what ever MOD/FONTs/any flashable ZIP you have...
Flash it now - you won't be able to able to flash it later...
5. Power device off
6. Flash stripped kernel .... STRIPPED ftf
....and enjoy your deodexed rooted KitKat
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
...and now we can MOD/EDIT/BUILD again...
HIT tnx button ... - I worked whole day to find a way to deodex LB - I guess I deserved "tnx"
Don't forget to say tnx to
@Nut
@krabappel2548
;s
where is nut's prerooted KK fw?
I need backup TA or?.
---------- Post added at 09:32 PM ---------- Previous post was at 09:30 PM ----------
read http://forum.xda-developers.com/showthread.php?t=2687443 this thread..(Samakos)
thx for tip were can i get Krab deodex patch?
serqeftin said:
I need backup TA or?.
---------- Post added at 09:32 PM ---------- Previous post was at 09:30 PM ----------
read http://forum.xda-developers.com/showthread.php?t=2687443 this thread..(Samakos)
Click to expand...
Click to collapse
Thechiller86 said:
thx for tip were can i get Krab deodex patch?
Click to expand...
Click to collapse
this is NUT Prerooted: http://forum.xda-developers.com/showthread.php?t=2687443
and this is Krabappel: http://forum.xda-developers.com/showthread.php?t=2688411
Simow.b said:
this is NUT Prerooted: http://forum.xda-developers.com/showthread.php?t=2687443
and this is Krabappel: http://forum.xda-developers.com/showthread.php?t=2688411
Click to expand...
Click to collapse
adding this to OP..
Sorry guys, had some family things and jobs so I haven't finished OP...
serqeftin said:
I need backup TA or?.
---------- Post added at 09:32 PM ---------- Previous post was at 09:30 PM ----------
read http://forum.xda-developers.com/showthread.php?t=2687443 this thread..(Samakos)
Click to expand...
Click to collapse
No...
You won't unlock bootlooader...
This is just tip, just one thread to remember all of you - don't restart, flash deodexed patch and then restart...
funky0308 said:
adding this to OP..
Sorry guys, had some family things and jobs so I haven't finished OP...
Click to expand...
Click to collapse
No problem man
Finally - My favorite navigation bar icons
Sent from my C6903 using Tapatalk
funky0308 said:
Finally - My favorite navigation bar icons
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Shared bro please, but stock icons in nabvar
Enviado desde mi C6903 mediante Tapatalk
I allready tried this before u opened this thread and it didnt work for me...
TheCornInGrove said:
I allready tried this before u opened this thread and it didnt work for me...
Click to expand...
Click to collapse
I guess you did something wrong...
Sent from my C6903 using Tapatalk
danytrial said:
Shared bro please, but stock icons in nabvar
Enviado desde mi C6903 mediante Tapatalk
Click to expand...
Click to collapse
I rewrite one xposed MOD to use this navigation bar icons.
If you are using Xposed I'll send apk for you..
Don't have time for systemUI editing -
If you don't use Xposed, waiting until tomorrow...now that I have deodexed system I'll start to work on some projects...
Sent from my C6903 using Tapatalk
thanks for ur guide
the only problem is backup in recovery because fail mounting system... what can i do?
Thechiller86 said:
thanks for ur guide
the only problem is backup in recovery because fail mounting system... what can i do?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=nextapp.sdfix
that may resolve the issue
MON5TER said:
https://play.google.com/store/apps/details?id=nextapp.sdfix
that may resolve the issue
Click to expand...
Click to collapse
Thanks but it dont work
Deleted
Same issues do all what exactly say in the instructions, but system mount error
Sent from awesome Z1
MON5TER said:
https://play.google.com/store/apps/details?id=nextapp.sdfix
that may resolve the issue
Click to expand...
Click to collapse
??!
That's for fixing sdcard rw status in KitKat.
It has nothing with mounting problem.
Thechiller86 said:
thanks for ur guide
the only problem is backup in recovery because fail mounting system... what can i do?
Click to expand...
Click to collapse
You can mount system with adb shell and try to backup.
That's the way - for now....
Flash, deodex and watch what are you doing until we get fully working recovery
Nemeziz 56th said:
Same issues do all what exactly say in the instructions, but system mount error
Sent from awesome Z1
Click to expand...
Click to collapse
Who ever said that will fix mounting problem?!
This is only trick/tip to deodex ROM using recovery flashed on 534 firmware...
Sent from my C6903 using Tapatalk
funky0308 said:
Who ever said that will fix mounting problem?!
This is only trick/tip to deodex ROM using recovery flashed on 534 firmware...
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
You were the one who mentioned that you found a solution to the mounting problem.
http://forum.xda-developers.com/showthread.php?p=51267944
Hey Guys here's TWRP for Lava iris 504q with full touch and advanced features
Requirements:
1- Rooted Lava iris 504q
2- Mobile uncle mtk tools app
(If flashing via mobile)
3- Recovery.img file (TWRP)
4- Sp tools and drivers
(If flashing via pc)
>Steps to flash by mobile itself:
1- Download mobile uncle mtk tools app from play store and TWRP from the link below
2- Keep the recovery.img file in the root of your sd card (Direct in sd card not in any folder)
3- Open the mobile uncle tools
app grant super user permission and click on recovery update
4- Select recovery.img file
It'll flash and ask to reboot in recovery mode
5- Reboot in recovery and check
------------------------------------
------------------------------------
> Steps to flash via pc using SP flash tools
1- Download the tools and drivers from below link
2- Extract and Install drivers.
3- Make one folder and put recovery.img and scatter file in it.
4- Extract and run the Sp flash tools
5- Select scatter loading and give the path of the folder in which u have placed both scatter file and recovery.img
6- Now u will see below check box of recovery is ticked
7- Click on download and connect your phone to pc via usb cable without battery.
8- After flashing completes you will see green circle. Now Disconnect your phone and insert battery.
Now you can reboot to recovery by simultaneously pressing volume up and power key.
Enjoy Full touch TWRP
Note: Backup done with cwm will not be restored via TWRP
Credits:
-Team win
-Hruaia Punte from FB group
Downloads:
Mobile uncle tools :
https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox
TWRP 2.5.0 :
https://www.dropbox.com/s/bm76pgrzo7tmqgn/recovery.img
Drivers, Sp tools and scatter files:
https://www.dropbox.com/sh/3hkfrwjton0qo5k/AAApFxj_Olyy7Ywd-lLegOsNa
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice guide.
Sent from my IRIS 504Q using Tapatalk
Thanks
Sent from my Iris 504q using Tapatalk
Thank you for the guide..!!
UzUmAKI_NaRuTo1 said:
Thank you for the guide..!!
Click to expand...
Click to collapse
You're welcome
Sent from my Iris 504q using XDA Free mobile app
nice guide
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
---------- Post added at 03:26 AM ---------- Previous post was at 03:18 AM ----------
will it be updated? and do you know how to theme it? i couldn't get a working app
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
narora9999 said:
nice guide
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
---------- Post added at 03:26 AM ---------- Previous post was at 03:18 AM ----------
will it be updated? and do you know how to theme it? i couldn't get a working app
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nice to see you here
Try this guide for theming from official website
http://www.teamw.in/twrp2-theme-guide
Sent from my Iris 504q using Tapatalk
thnx bro
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Twrp for lava Iris x1 selfie ??
Hey folks!
Here I'm back with the latest Paranoid Android for Galaxy Ace S5830 :highfive:
*NOTE: This is a test build is not yet tested and I do not recommend for normal users for now. I need someone to test and report it first
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INSTRUCTIONS,
1. UPDATE RECOVERY
2. FACTORY RESET (If coming from another rom or stock)
3. INSTALL ROM
4. REBOOT
5. INSTALL GAPPSlight
PA 4+ UPDATES DO NOT NEED A FACTORY RESET.
BUGS:
Bluetooth not working
CREDITS,
Great thanks to AOSPA-armv6 team, Olivier, Team Simplicit
AOSP/Google, CyanogenMod, AndroidARMv6 team, OmniARMv6 team, ME
LINKS,
Development:
Change Logs
XDA Forum
Github
Gerrit
Social:
Google+
Twitter
Facebook
DOWNLOAD
4.4 FINAL : https://drive.google.com/file/d/0B5K0Avammb3Sc3dnRnhWVG5COTA/edit?usp=sharing
Reserved for thanks, etc.
dosnt boot. trying to flash with latest cwm / twrp.
both whitescreen after install / reboot.
teuf3l said:
dosnt boot. trying to flash with latest cwm / twrp.
both whitescreen after install / reboot.
Click to expand...
Click to collapse
Give me a log if possible
rhar**** said:
Give me a log if possible
Click to expand...
Click to collapse
Same thing happend to me, tried to make a log but an ADB said that it is waiting for device but the device wasn't found because it was stuck in that white (I see a blue ) screen. Simply, the screen before bootloader.
Try flashing omni's kernel once
Sent from my Xperia M using XDA Premium 4 mobile app
rhar**** said:
Try flashing omni's kernel once
Sent from my Xperia M using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have flashed androidarmv6 kernel and actually it's booting ^^
---------- Post added at 09:48 PM ---------- Previous post was at 09:21 PM ----------
So, it booted...but systemui is Force closing....when I locked a screen and then i tried to unlock it the system was not responding only buttons shone...I will send a log ASAP
skoda9635 said:
I have flashed androidarmv6 kernel and actually it's booting ^^
---------- Post added at 09:48 PM ---------- Previous post was at 09:21 PM ----------
So, it booted...but systemui is Force closing....when I locked a screen and then i tried to unlock it the system was not responding only buttons shone...I will send a log ASAP
Click to expand...
Click to collapse
Thanks a lot for your pleasant review. I'll send you a patched file for the ROM soon. Just see if it works then
Sent from my Xperia M using XDA Premium 4 mobile app
rhar**** said:
Thanks a lot for your pleasant review. I'll send you a patched file for the ROM soon. Just see if it works then
Sent from my Xperia M using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nice...I hope that one day you will make this rom fully working. I see that I won't send you a log. There is a trouble between a phone and laptop but I will need to find where. First, I restore my backup to see if it was an error in rom or in drivers or wherever. But few weeks ago I did a log for you at other rom so let's see if it will be working at CM11.
Well, error was in your rom somewhere...I had USB debugging on even in your rom but phone didn't connect to laptop.
Any progress with ROM ?
skoda9635 said:
Any progress with ROM ?
Click to expand...
Click to collapse
Nothing as of now. I'll keep you all updated
Ako vidím nie som sám zo slovenska ( how i see, not only me is from slovakia there)
My question : Does it boot or not? It can be use for a daily use?
pocok5 said:
Ako vidím nie som sám zo slovenska ( how i see, not only me is from slovakia there)
My question : Does it boot or not? It can be use for a daily use?
Click to expand...
Click to collapse
Pekné vidieť niekoho zo Slovenska po Slovensky ale nie nie si...Nice to see someone from Slovakia and with Slovak language but no you're not alone....It boots but Systemui is force closing...I would not recommend it for now...Developer is working hard on developing so let's wait for final result.
did it work on the stock kernal and which kernal that i need
Sent from My Gt-s5360
Rom:Mini rom V3 (AIO LATEST)
Kernal Stock mini Kernal
Mods:Xposed Moduls GB
Gt-s5380
Rom:stock rooted
Kernal:stock
Recovery:Cwm v 5.0.2.6
Mods:xposed Moduls GB
madkita said:
did it work on the stock kernal and which kernal that i need
Sent from My Gt-s5360
Rom:Mini rom V3 (AIO LATEST)
Kernal Stock mini Kernal
Mods:Xposed Moduls GB
Gt-s5380
Rom:stock rooted
Kernal:stock
Recovery:Cwm v 5.0.2.6
Mods:xposed Moduls GB
Click to expand...
Click to collapse
It won't boot as of now. Have to wait for it
Sent from my Xperia M using XDA Premium 4 mobile app
Can you upload the ROM to dev host ?
sent from my ace using omni 4.4.2 by Xda premium app
rhar**** said:
It won't boot as of now.
Click to expand...
Click to collapse
Hey, you can make the following build at least version 4.6
ywor1 said:
Hey, you can make the following build at least version 4.6
Click to expand...
Click to collapse
This project is closed. However, I may try to, but cant guarantee any date