[Q] RSDlite wont detect Defy 525 (Tried EVERYTHING) - Defy Q&A, Help & Troubleshooting

Don't jump to conclusions already!
So I found my old Defy MB525 (bought in India) after a long time after I had put it away because I got an Atrix. I don't remember what firmware it was running. Tried reviving it but the battery died.
Now the phone was bricked and had the initial continues boot loop issue . Solved the ' low battery' problem by charging it a few hours connected to the Laptop and then using the wall charger. Now it's ready to be flashed. Is what I thought.
I have spent two days on this thing and turns out I am real noob with Red/green lenses, BL7 and what not.
Our good friend here - http://forum.xda-developers.com/showthread.php?t=1093352 finally got me to the line on which I should start. After reading thousands of posts there are quite a few of us who cant figure out how to solve the problem of unrecognized device on RSDlite!
The problem
unrecognized device on RSDlite
What I have tried -
Reinstalled RSD lite
Reinstalled drivers
Replacing batteries
What happens -
RSDlite never recognizes the phone and hence the box on the left (Device property) and 'Port 1' is always empty. Have waited for a good amount of time as most members suggested but nothing has helped.
Phone Details -
Motorola MB525 ( India)
Bootloader 09.10
CAN access Android system recovery utility where I can erase cache and data
What I have now -
RSDlite 4.9
USB drivers v4.9
2.2 Froyo for India (Some good fellow on the forum pointed me there, hope that is what I should have with me)
All I want is for the phone to operate normally for now. Not fussy about the android version or anything.
I have gone through a lot of posts but none of them helped and there still a lot of people stuck with the same issue!
Hope someone can help!
Thanks!

motorcycho said:
What I have now -
RSDlite 4.9
USB drivers v4.9
2.2 Froyo for India (Some good fellow on the forum pointed me there, hope that is what I should have with me)
Click to expand...
Click to collapse
Update your USB drivers, that's most likely the cause.
I have Win 7 x64, and am using RSDlite 5.4.4 and hasn't failed me once. I do not run it with administrator privileges. If updating the drivers does not work, then try with a different version of RSD lite.
Note: You have to download and install the Motorola Device Manager, it comes with the drivers, unlike old drivers that would come in just a .msi installer.

Related

[Q] Bricked Defy and not recognized by my USB

Guys,
First of all, hello to all! So, I followed a tutorial to install Froyo on my Defy. Now I'm stuck with my phone trying to boot as soon as i put the battery on, but it never makes it past the "M". I can get into recovery. I wiped data, cache and tried to install the "update.zip" but it aborts saying "signature verification failed." I have the boot file (that was the next step) to install using RSDlite 4.9 but the phone is not even recognized any of my USB ports. Any ideas? Thanks to all in advanced.
press volumn up buton and power button on boot , once you saw the backlit is on , release the button , you will see the rsd litle showing your usb .
dont worry . i think it is your first time to use RSD only
yea i been through that ( doesnt work on vista )
you need to install rsd lite and 2.51 UK Firmware ( no usa )
google it and you will find it or on this forum
install usb driver from motorola webiste
install rsd lite
put uk firmware in ... C drive/ program files / motorola / rsd lite
install driver
If your phone is stuck on " M " then pull battery out
turn on and quicky press power + vol up ( i think ) before M even appear
wait till it say your boot loader and your battery
plug phone in
start rsd lite
on ... look up your uk firmware that you you recently put in rsd lite folder
then you should see your phone connected on the 1 slot
then hit start or something and wait it out .
Thanks guys! But I've been messing around with this thing for so long, I drained the battery. I had to run it up to the local phone store to get it charged. I'll pick it up in a couple of hours and give your advice a try.
Hey guys! it worked! I'm up and running. Now, anyone has a link to bypass this Welcome to Motoblur screen. Is there a Custom Froyo or Gingerbread Rom out there without Motoblur?
Alright... I'm up and running, but no camera!!! Heck, it was a learning experience. I guess I'll go back to 2.1 now. LOL
So the Chinese ROM was rooted. I installed Clockworkmod and restored from the backup i had made of the original 2.1 OS. I'm back to a rebooting phone not making it past the "M" I went back to RSDlite and realized the boot file said 2.2 only. Can anyone assist me finding the right one to go back to original. I haven't been able to find a thread about reverting back to original.
The more I read, the smarter I get seems like the only thing I'm missing here is the SBF file for my original T-Mobile OS. I'm looking at the motorola website, but I can't find it. Can anyone point me to it? Thanks all! Oh yeah, this is the first android phone i mess with so my apologies.
There is no us sbf file. You have to flash a uk version and restore 3g with the posted fix. You can find the links to available sbf files on this forum. They are not available thru moto's site.
Sent from my ME525 using Tapatalk
Just to make sure I got it right. After using clockworkmod to restore to my factory backup, I need to use the UK sbf to be able to boot to it. Correct?
I found the sbf for Central Europe with no Motoblur. Does anyone know of any issues with it?
well the only way to fix this if you previously backed up your rom/files with recovery ( good thing i did this ). If not then you have to live with what you got.
I backed up my original firmware using clockworkmod. I flashed to the Chinese 2.2 but my camera didn't work. Since the camera is important to me, the Chinese Froyo was a deal breaker. I installed clockworkmod again and "recovered" from my original backup but now my defy won't boot. Did I miss a step?
Your data from the backup may cause issues when rolling backwards. Install an eclair sbf, then restore. That worked for me.
On another note there is a fix for the camera. Check the forums.
Sent from my ME525 using Tapatalk
Bricked Defy and not recognized by my USB
I also bricked my phone when going back to stock from cm7. My phone is able to go into boot loader. But it is not recognized by my desktop PC/RSDlite. I tried in linux with SBF_Flash. I tried with my laptop also. no luck . anyone please help me!
arulshoponline said:
I also bricked my phone when going back to stock from cm7. My phone is able to go into boot loader. But it is not recognized by my desktop PC/RSDlite. I tried in linux with SBF_Flash. I tried with my laptop also. no luck . anyone please help me!
Click to expand...
Click to collapse
Just try and install the Motorola Drivers in your desktop and open RSDLite and press 'show devices' button. It will surely show the details of your phone.
Then point RSDLite to the stock SBF and flash away.
kvigneshkrish said:
Just try and install the Motorola Drivers in your desktop and open RSDLite and press 'show devices' button. It will surely show the details of your phone.
Then point RSDLite to the stock SBF and flash away.
Click to expand...
Click to collapse
Thanks! Vignesh. But i have drivers installed. Tried uninstalling and reinstalling drivers. But did not help
Edit:
I missed to mention. My defy did not connect to desktop even before bricking.
arulshoponline said:
Thanks! Vignesh. But i have drivers installed. Tried uninstalling and reinstalling drivers. But did not help
Edit:
I missed to mention. My defy did not connect to desktop even before bricking.
Click to expand...
Click to collapse
If you hear the USB plugged in sound in your Pc, it's a messed up driver installation. If you don't hear the sound, it can be a bad cable, or a faulty microusb port (assuming that your pc usb works fine). Try once in a different pc and with a different microusb cable.
nsm1234 said:
If you hear the USB plugged in sound in your Pc, it's a messed up driver installation. If you don't hear the sound, it can be a bad cable, or a faulty microusb port (assuming that your pc usb works fine). Try once in a different pc and with a different microusb cable.
Click to expand...
Click to collapse
I do not hear any sound from desktop/laptop.
I think I stuck in boot loop. When I try to power on the phone, it just shows CM7 boot logo for few seconds then restarts again shows the boot logo... this happens continually. When I try to enter into recovery, it does not go to CWM recovery instead it goes to stock recovery. I am still able to enter into boot loader. In boot loader, it says battery OK connect USB to program. When I connect USB, it is recognized by phone and says transfer mode: USB. But my PC does not shows up the phone.
I tried re-installing drivers and RSDlite many times but no luck. But I have nandroid backup of CM7. Is there any possibilities to enter into CWM recovery?
Any help is appreciated.
Edit:
I tried even different USB cables and PCs also.

[Q] Bricked Milestone2? Wont Charge/Stuck at M logo

So a couple days ago I installed MIUI to my phone. Everything went great, it booted successfully and worked for 2 days or so, until i accidentally let the battery die (not sure if this is related to the problem or not). Since this day, it wont charge or turn on while connected to the wall. When it is connected to the wall, it starts the screen and show a big battery with a question mark inside. I tried a friends battery and it gets stuck at the M logo. The only thing i can access now is the stock recovery screen. Any ideas on how to solve this? Thanks
viiniq said:
So a couple days ago I installed MIUI to my phone. Everything went great, it booted successfully and worked for 2 days or so, until i accidentally let the battery die (not sure if this is related to the problem or not). Since this day, it wont charge or turn on while connected to the wall. When it is connected to the wall, it starts the screen and show a big battery with a question mark inside. I tried a friends battery and it gets stuck at the M logo. The only thing i can access now is the stock recovery screen. Any ideas on how to solve this? Thanks
Click to expand...
Click to collapse
1.Download RSD Lite
2.Download the stock .sbf file for your device
3.Use your friends battery and boot into bootloader by holding Power+Volume Down+Camera button
4.Open RSD Lite, choose the .sbf file you downloaded, connect your phone to pc with usb cable and flash it.
If your pc doesn't reckognize your phone, you'll have to download and install the latest motorola milestone 2 usb drivers.
Ok. So i tried to apply the sbf file, but as soon as the process starts, RSDLite says under the status area "Phone[0000]:Creating Image File." and it wont get thru this. Any ideas?
Maybe try sbf_flash on linux?
Will the sbf_flash work the same on the mac? Or should they work differently on mac and linux? I tried it earlier today and i got stuck at some part i cant remember...I'll recharge the battery with a universal charger that i found (cause it's saying its too low to program) and try it again tomorrow, so i just wanna be sure that i can do it on the mac...
Thanks
It should work same way. OS X version is just port from the linux version.
You have to run RSDlite as an administrator. Right click on RSD.exe or RSDlite.exe not shure what's the exe file named and Run as administrator.
br Zola
having the same problem
after flashed MIUI/CM7
the battery died then the phone cant boot to desktop
tried RSD Lite, flash failed lol
Tried to run RSD as administrator. Still stuck at the same point.
Tried sbf_flash, stuck at 'waiting for phone:'.
I'll try to download the sbf file again, just in case it is corrupted.
Any other ideas?
PS.: I'm running rsd on VMWare, could this be the problem??
Dunno how exactly works USB bridge in VMWare, but rsd on pure (not virtualised) system is worth a try. Also - are you sure, your battery is charged? I know, that if your phone can't boot, the battery will not charge via USB - you should use universal charger or somebody here recommended (and successfully repaired MS2 this way) put contacts directly on the battery to charge it little (just for RSD flash).
I charged it on a charger that you put the battery directly into the contacts. I'm sure that it is charged cause 1) the led display on the charger says so and 2) when i get to bootloader mode to apply sbf, it says 'Battery OK / OK to program' , and before i charged it, it would say: "battery too low, cant program", or something like that.
I'll try to get a windows pc and try to apply the sbf
Thank you guys.
I was trying to flash it with a sbf that was on a pendrive. All i did was transfer the file to the HD and flashed it via RSDLite, using VMWare.
Now my phone is working again.
Thank you very much to everyone that helped me

R2D2 - Bootlooping, SBF failed 0x70BE

Hey there!
My beloved Droid R2D2 seems to be ailing in the form of being bricked. Nothing happened to it, it just decided that today (really three days ago) was a good day to get stuck in Bootloader on infinite loop. The battery is fully charged, whenever I turn on the phone it goes to:
Bootloader
D2.37
Battery OK
OK to Program
Connect USB
Data Cable
I can get into both Recovery and Bootloader the normal way (I've tried wiping my cache and setting it back to factory settings already) but can't seem to get to anything else.
I tried SBFing it using RSDLite v5.6 with the most recent drivers installed and the SBF file from the lovely droid developers site (specifically the 2.3.4 version). It gets to 100%, the phone restarts, but then I'm presented with the message:
Error switching phone to BP Pass through mode (0x70BE); phone connected
and a big FAIL in the Result box.
I've been looking all over for solutions so I wouldn't have to post this, but it seems everyone else has errors or corrupted codes with their bootloader, whereas mine seems to think it's okay.
I absolutely adore this phone and am by no means ready to give it up (they've even stopped producing them so any new phone would have to be a plain old regular Droid2...), so any help would be unbelievably appreciated!
http://droid.koumakan.jp/wiki/SBF
Note: Under certain circumstances (especially when using Windows Vista and Windows 7) there might be a problem with not all device drivers being installed correctly. In such case, the flashing process will abort, and your phone won't be able to boot normally. RSDLite shows the following error message:
Error switching phone to BP Pass through mode
To get around this issue, once you get a Device driver could not be installed message from Windows, don't close RSDLite nor power off the phone. Start Motorola Driver Installer once again, and let it finish. Then if RSDLite didn't timeout yet, head to Device Manager, find the Unknown device, and in its properties' Driver tab click Update driver…. It should now install normally. If RSDLite timed out and you got an error from it, just repeat the SBF process. The driver should now be present, and the flashing process will finish normally.
Once the flashing process is complete, RSDLite will tell you to “power the phone up manually”. In most cases you won't be able to do this straight as instructed: the phone will be bootlooping. Take the battery out, and then place it back in. Press the lock/power button: the phone should boot normally.
Close RSDLite. Disregard the warning about flashing not being completed since your phone has already booted into Android.
In case you still get bootloops after pulling the battery, refer to Android Recovery.
Click to expand...
Click to collapse
if you still no luck, to ezSBF
http://www.droidforums.net/forum/droid-2-hacks/161849-tool-ezsbf.html
Ah! ezSBF worked! This is both wonderful and unfortunate (I ordered a droid 4 to replace my phone deciding it really was dead so now I have to figure out whether to switch to the 4 or send it back for a few more months in the hopes that its price goes down a bit more...) but mostly really good to see old R2 alive and well again. Thanks!
ezsbf has helped a lot of people
Sent from my MB870 using xda premium
so i have a questions. i got mine rooted and deleted something i shouldnt have deleted. so i sbf back to stock. its says that the flash was successful but my r2d2 keeps bootlooping. any ideas
Which sbf did you flash?
Sent from my DROID2 using Tapatalk 2
did you try wiping cache or data?
delete this
jwagman1 said:
delete this
Click to expand...
Click to collapse
you decide to to read the thread? like 4 posts up

[Q] Stuck on bootloader screen

Friends,
I'm with a big problem on my Defy..I think that it's dead but i wont give up on it without asking you first..so please..try to help me..
I was on a CM7 nightly build for a long time (6 months on more)..then it start to show some problems on boot..didnt boot properly..starts to turn cell phone off for nothing without me asking to...
Then I booted on recovery and tried to wipe everything and put some new rom but something goes wrong..nothing was wiped .. recovery show some errors on mounting some partitions and things like that..
Then i thought I'll back to stock..flash a new recovery again..root my cell again..and try to put the CM ROM again..
Then i downloaded a Brazilian Retail SBF and RSD Lite here on XDA..installed moto drivers and tried to flash
now EVERYTHING stops working..it dont flash properly..in the end of process RSD Lite shows FAIL and cellphone dont boot anymore..it goes to BootLoader screen without me pressing vol up button..and it shows CODE CORRUPT on bootloader screen..
i can post a log from RSD Lite if you want to see it..
Please help me..
Hi, what bl version show the flashmodus. 9 is bl7 try to find the right sbf. The country from the sbf is not very important. You can change the basement in cm to your country under setting and then defy parts by cm10.
Gesendet von meinem MB526
joke19 said:
Hi, what bl version show the flashmodus. 9 is bl7 try to find the right sbf. The country from the sbf is not very important. You can change the basement in cm to your country under setting and then defy parts by cm10.
Gesendet von meinem MB526
Click to expand...
Click to collapse
It says:
Code:
Bootloader
09.10
Can you say some SBF that fits in this case?
or teach me how to check it?
Thanks for trying to help!
I faced a similar problem (if not the same) when i tried to flash CEE sbf. It failed for like 7 or 8 times. I tried everything (changing slots, PCs, drivers). Because the flashing process was stoping at different moments (percentages) I kept trying and it eventualy succeded. I will never understand how or why it worked. I was lucky that my battery didn`t die.
Try to:
-download drivers from another source (x86 or x64 - based on your os)
-install an older or newer version of RSD Lite
-make sure the usb cable is plugged well
-try another sbf (there is a thread with almost every sbf)
stefa_vr6 said:
I faced a similar problem (if not the same) when i tried to flash CEE sbf. It failed for like 7 or 8 times. I tried everything (changing slots, PCs, drivers). Because the flashing process was stoping at different moments (percentages) I kept trying and it eventualy succeded. I will never understand how or why it worked. I was lucky that my battery didn`t die.
Try to:
-download drivers from another source (x86 or x64 - based on your os)
-install an older or newer version of RSD Lite
-make sure the usb cable is plugged well
-try another sbf (there is a thread with almost every sbf)
Click to expand...
Click to collapse
My battery already died..I had cut a USB cable and now I'm using this to charge my DEFY..
tried 2 pcs already and still not working
tried on linux with sbf_flash instead of RSD Lite on windows and still not working
tried many different sbf's and still not working
i got errors on veryfing checksum process..

[Q] Motorola defy black screen with white led

hi all i bought defy about a year ago as a second phone from ebay with cm7 installed.last week i purchase another phone and give my 7 years old daughter. however i reset everything and phone turn old version blur mod then stuck on m logo i download rom and sort the problem.
real problem starts now i try to install cm 9 download all required files wiped the phone and install the rom however it didn't restart stuck on black screen and only white led when connected with usb also didn't connect or recognized by rds lite.I found tread battery wake up from i think was ''mggrager'' or something else finally rds recognized the phone and install another sbf but still stays same as black screen and white.i read so many threats on this side or others and each i installed custom roms without clearing cache
battery replaced with replacement battery also original
all drivers installed
it doesn't respond any buttons or usb connection
rds only with battery jump
please help what to do
I'm having the same problem as you are, i believe... I had cm11 (or 10, not sure) installed for about a month now (back in december) .... Went on a trip, and when coming back my phone battery ran out at the airport... I take my phone home, not really giving it much importance, and i noticed it would never charge and/or turn on, and that when I connect it to the pc, nothing happened other than the white led coming on.. RSD won't recognized it...
So i found out i had to charge the battery manually, and used a Universal Charger... Still, no recognition by RSD Lite...
Finally, i found a way:
1. Open RSDLite
2. Connect phone (no battery on it)
3. While holding Power + Vol Up, put the battery in
4. RSD will recognize your phone!
Problem is, it recognizes my MB525 as "S Flash OMAP0360"
And when i try to flash a .sbf i used previously to recover my phone (had bricked it by trying to change ROMs in a sloppy manner), it seems to flash smoothly, but when it's going to reboot the phone, the progress goes up to 100% and then asks me to reboot it manually.. I read somewhere that to fix that i should take the battery out, disconnect the phone, put it back in, and make RSD recognize it like i mentioned before...... and after RSDLite says flashing is PASSED, the phone still won't turn on... I have tried at least three times and gotten the same result... Help?
I don't know if i should make a thread of my own.. i think we have the same problem, and i REALLY need my phone back.. so i guess we could just help each other fixing it somehow....
The SBF i am using (because it helped me save my phone before) is:
JORLA_U3_3.4.2_107-9_SIGNED_USAJORDMR1B25TIGCOLA01E.0R_JORLAFROTIGCOLA_P009_A002_M010_HWp3_WIG146037_Service1FF.sbf
EDIT: Also, i read somewhere that when all you get is the white led (when connecting to PC) it means that your battery is not charged enough for flashing.. ?
i already tried several times this method however no luck i am really not sure what to do any more i think only option try to find latest rom or first rom then try again if any luck will update and give the links
pasha543 said:
i already tried several times this method however no luck i am really not sure what to do any more i think only option try to find latest rom or first rom then try again if any luck will update and give the links
Click to expand...
Click to collapse
bump 4 help

Categories

Resources