My L7 (p700) is rooted with the V20D_00_m rom and worked fine until I tried to update to V20E via OTA, down loaded fine, rebooted but went straight to clockworkMod Recovery v6.0.3.2and that's where it's stuck
Tried rebooting again, same result
before trying to flash the original Rom, I deleted cache, & dalvic cache
tried loading the V10K zip onto my external sd card, the robot falls and process aborted
tried to connect to pc to do a kdz repair using KDZ_FW_UPD.exe, but the pc / phone are not connecting
I'm at a loss what to do, I've searched the forum but posts similar to this don't help as most seem to have usb connectivity, if I had that I wouldn't need to post.
Any advice please from more knowledgeable members pleas
stevejd58 said:
My L7 (p700) is rooted with the V20D_00_m rom and worked fine until I tried to update to V20E via OTA, down loaded fine, rebooted but went straight to clockworkMod Recovery v6.0.3.2and that's where it's stuck
Tried rebooting again, same result
before trying to flash the original Rom, I deleted cache, & dalvic cache
tried loading the V10K zip onto my external sd card, the robot falls and process aborted
tried to connect to pc to do a kdz repair using KDZ_FW_UPD.exe, but the pc / phone are not connecting
I'm at a loss what to do, I've searched the forum but posts similar to this don't help as most seem to have usb connectivity, if I had that I wouldn't need to post.
Any advice please from more knowledgeable members pleas
Click to expand...
Click to collapse
I don't want to seem as if I'm bumping this but I'd like to know if this is chuck it in the bin you've bricked it or a possibility of a fix, surely there must be a way of clearing the memory and starting from scratch as you'd do if you formatted windows.
Problem solved, a friend of a friend works with Android told me to take the battery out, connect the usb and try combinations of vol + power, after 4 tries..emergency mode and full pc connectivity.
Flashed V20a sucessfully
Related
Hello, recently I've tried to install clockwork recovery in my Galaxy S (I9000B), so I've downloaded ODIN and all the other tools and drivers. But the USB on my phone wasn't working, and it was the phone, I've tried different drivers on different computers and the same result, "The USB device was not recognized". So I've downloaded on play market the Busybox, in hope of getting something done. After installing it, busybox asked to reboot phone, so I did it, and the problem started, the phone is stuck on the booting animation, that one showing the phone model. I can still acess the download mode and the stock recovery, but can't connect to PC to flash via ODIN, and external SD is not possible aswell. I've already tried to wipe dalvik cache and data, but nothing. What do I do?
Zkaar said:
What do I do?
Click to expand...
Click to collapse
try a a solution from My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.
Most of all i9000B is not compatible with i9000 ROMS so make sure you only use i9000B ROMS
xsenman said:
try a a solution from My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.
Most of all i9000B is not compatible with i9000 ROMS so make sure you only use i9000B ROMS
Click to expand...
Click to collapse
Yeah, I've already tried that, but stays the same. I never got the chance to flash a custom rom because of the malfunctioning phone USB. There's nothing I can do, or there is something that I don't know
Zkaar said:
Yeah, I've already tried that, but stays the same. I never got the chance to flash a custom rom because of the malfunctioning phone USB. There's nothing I can do, or there is something that I don't know
Click to expand...
Click to collapse
all solutions to solve USB connection problems are mentioned in the above link
Zkaar said:
Hello, recently I've tried to install clockwork recovery in my Galaxy S (I9000B), so I've downloaded ODIN and all the other tools and drivers. But the USB on my phone wasn't working, and it was the phone, I've tried different drivers on different computers and the same result, "The USB device was not recognized". So I've downloaded on play market the Busybox, in hope of getting something done. After installing it, busybox asked to reboot phone, so I did it, and the problem started, the phone is stuck on the booting animation, that one showing the phone model. I can still acess the download mode and the stock recovery, but can't connect to PC to flash via ODIN, and external SD is not possible aswell. I've already tried to wipe dalvik cache and data, but nothing. What do I do?
Click to expand...
Click to collapse
Maybe You should try this:
http://forum.xda-developers.com/showthread.php?t=1602877
I simply took off the back cover and heated the motherboard.
It worked for me!
If you still have access to your recovery then just install a new kernel and ROM.
Sent from my GT-I9000 using xda premium
Hi, I've got a HUGE problem.
Today I decided to root my G2 d802 (european free distribution) and flash a CM rom.
After cleaning dalvik and factory reset i tried to flash this rom but Status 7 showed up.
So, I tried to launch G2 and find a solution for it but it started to boot loop.
Okay.
Even worse, (don't ask how, but it wasn't me!) there PROBABLY was format /system,,
After that my G2 stucks on LG logo and nothing else happens. No loop no anything. I can only go into recovery while seeing white screen asking if I agree to do format. Everytime, but it never boots normally, it's always stuck.
So, what can I do?
I can't access the phone from my computer while beeing in the recovery (it appears as a device, but i cannot access it..).
I can only use recovery
LG G2 D802
CWM-based Recovery v6.0.4.4
Sorry for bad english, not my native language.
Help me, please! How can I unbrick my G2?!
So I tried to flash Stock rom, but when in download mode G2 isn't considered as plugged into a computer. LG Mobile Support Tool can't find the device... Any help?
legions91 said:
Hi, I've got a HUGE problem.
Today I decided to root my G2 d802 (european free distribution) and flash a CM rom.
After cleaning dalvik and factory reset i tried to flash this rom but Status 7 showed up.
So, I tried to launch G2 and find a solution for it but it started to boot loop.
Okay.
Even worse, (don't ask how, but it wasn't me!) there PROBABLY was format /system,,
After that my G2 stucks on LG logo and nothing else happens. No loop no anything. I can only go into recovery while seeing white screen asking if I agree to do format. Everytime, but it never boots normally, it's always stuck.
So, what can I do?
I can't access the phone from my computer while beeing in the recovery (it appears as a device, but i cannot access it..).
I can only use recovery
LG G2 D802
CWM-based Recovery v6.0.4.4
Sorry for bad english, not my native language.
Help me, please! How can I unbrick my G2?!
Click to expand...
Click to collapse
There is a way to probably fix it but if you cant just put your phone in the water till it breaks and use your warranty to get another one thats what I did with my D801 when it bricked
CHlCKEN said:
There is a way to probably fix it but if you cant just put your phone in the water till it breaks and use your warranty to get another one thats what I did with my D801 when it bricked
Click to expand...
Click to collapse
Nevermind. It came back to boot loop, so it's not bricked.
But i've got some problems.
Mainly - i still can't access my phone through my computer.
When i try to flash Stock Rom (http://forum.xda-developers.com/showthread.php?t=2432476 this thread) i recive: http://i.imgur.com/ijSgtwp.png - screenshot from Device Manager when in download mode: http://i.imgur.com/kMLCW7t.png and when in recovery: http://i.imgur.com/wGU6qnz.png
So we're back into boot loop.
Any help? Please?
Can you attach an otg card reader or flash memory stick from recovery?
adb sideload helps you. or adb push
The problem is, because of a tutorial on my local Android site which tells how to unloop boot in G2 I've got TWRP now instead of CWM (it was about access to terminal something and writing a command, but it didn't do ****, but it seemed to work for few people), and it would be fine, but... now computer doesn't recognize my phone. Unidentified Devices: LG G2-D802, so I can't access sideload...
corrsea said:
Can you attach an otg card reader or flash memory stick from recovery?
Click to expand...
Click to collapse
I've got OTG Cable (bought for my Nexus 7) somewhere, but none of above.
LOL NEVERMIND
Becouse I had nothing to lose i decided to try to flash CM and it worked.
CWM couldn't flash it for 5 times, TWRP did it immediatly.
Topic closed, thank you for your responses.
You need to first download the kdz and lg flash utility with drivers.
Install drivers
The factory reset deleting system, cache, internal sd.
Then shutdown your g2.
Start to downloaded mode connecting your g2
Flash kdz & voila... Done
I too bricked my phone before. My flashing stuck at 49%. Recovered using above method, all is well now
This works 1000%. I bet on it. Just remember to wipe the phone completely before flashing. You will return to stock with unrooted status in download mode. U will have your warranty back too
Sent from my LG-D802 using XDA Premium 4 mobile app
Sent from my LG-D802 using XDA Premium 4 mobile app
I had a similar problem, got it fixed with this http://forum.xda-developers.com/showthread.php?t=2582142
Maybe it works for you too.
Hi everyone
please accept for my poor English straight away and that i am noob
i bought LG p700 from the ebay saying that it is stuck in a boot loop mode so i thought it will be an easy fix which is not at all,
what i found out that it has a clockwordMod Recovery v6.0.3.2 i am not really sure if it helps or not ,
i red i couple topic's how to go back to the stock Rom but it doesn't work for me the the KDZ doesn't found the phone, even thought when i connect it to the computer the windows 7 automatically installed the drivers of the phone,
also i tried to install from my sdcard cm-10-20131006-NIGHTLY-p700 but it didnt work , everything goes fine but in the end it steal stucks in the boot loop,
so is there anyone could help me with is phone i will appreciate it a lot , also i prepared to install a stock Rom because i am a bit an old fashion i got
KDZ_FW_UPD_EN and V20D_00.kdz but as i said when i tried to install it, it didn't go true because i got a message where it says that the phone was not found
many thanks
gugutm
gugutm1 said:
Hi everyone
please accept for my poor English straight away and that i am noob
i bought LG p700 from the ebay saying that it is stuck in a boot loop mode so i thought it will be an easy fix which is not at all,
what i found out that it has a clockwordMod Recovery v6.0.3.2 i am not really sure if it helps or not ,
i red i couple topic's how to go back to the stock Rom but it doesn't work for me the the KDZ doesn't found the phone, even thought when i connect it to the computer the windows 7 automatically installed the drivers of the phone,
also i tried to install from my sdcard cm-10-20131006-NIGHTLY-p700 but it didnt work , everything goes fine but in the end it steal stucks in the boot loop,
so is there anyone could help me with is phone i will appreciate it a lot , also i prepared to install a stock Rom because i am a bit an old fashion i got
KDZ_FW_UPD_EN and V20D_00.kdz but as i said when i tried to install it, it didn't go true because i got a message where it says that the phone was not found
many thanks
gugutm
Click to expand...
Click to collapse
Install LG PC Suite, the LG Mobile Support Tool and the LG L7 USB driver. Then try again. Make sure your phone is set on 3GQCT and EMERGENCY on KDZ.
Before you install a ROM, you're recommended to wipe data.
Bootloops can occurs in many ways, if you can logcat your problem, maybe we can help you.
F4uzan said:
Before you install a ROM, you're recommended to wipe data.
Bootloops can occurs in many ways, if you can logcat your problem, maybe we can help you.
Click to expand...
Click to collapse
hi there im stuck in lg logo i had 4.4.2 but i had some problems with my gps so i decided to go back on v20d i used kdz emergency 3gqct battery out phone in emergency mode and im stuck in lg logo please can someone help me and sorry if my english is bad im from croatia.
Please note that I have done search and tried various solutions before starting this thread :
Hi My A6000 phone got factory reset and then I tried to recover some lost pics...but I was advised that my phone needs to be rooted first, so the software opened kingo root soft, It showed me the message that phone has been rooted and when it rebooted there was a notification of software update which I said ok and ever since then the phone is stuck on system recovery mode (not sure if it is called soft brick or not) and I have tried many things including choosing all the options starting from reboot system now, apply update from ADB, wipe data/factory reset, wipe cache partition, apply update from sdcard but nothing seems to work!!! oh I for got to mention on the top of the screen it says Androoid system recovery <3e>Kraft -A6000_S035_150507 and then gives all the option and i have tried this following :
https://boycracked.wordpress.com/2015/06/03/unbrick-lenovo-a6000/
but some how for the first solution it keeps on saying download failed, emergency recovery download failed...anyways it does not work
I have also tried this
http://forum.xda-developers.com/chef-central/android/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247
but it has ADB killed (tried looking and installing adbfixer solution--it says it cannot finf adb.exe even though it is there)
Is there any soultion to this!!! Please help if there is one!
the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
install cwm
Install cwm from pc and then try
Use HW flash tool
Even my Lenovo a6000 plus was bricked. But mine is more complicated than your's.
I've installed CWM recovery before. But unable to access it, atleast native Android recovery either.
"Rev-app" folder from "System" folder were deleted unfortunately. I couldn't even wipe, hard reset or anything.
After a long struggle, i've found a way out. I've came across a Qualcomm flash tool "HW OneKeyDownload Tool".
And finally, i won on it!
Download it from here: docs.google(.)com/uc?id=0B3qYFBKKL2hieDM1RUNMQWRsSHc
You need to have:
1. Mobile drivers installed
2. Universal ADB drivers (That ZIP will have it)
3. Stock ROM or any custom ROM
See this post on AndroidXDA for more info:
androidxda(.)com/download-hw-onekeydownload-tool
install cwwm
installing cwm from pc is the best way to unbrick
Dont feel bro.just follow the steps which u tried before to install cwm.but before that if ur pc cant find ur mobile.then use this command.
"Adb shell"
And it shows searching for device.
Then put ur battery out and insert it again.ur device will be detect by pc.
Sent from my Lenovo A6000 using XDA Free mobile app
am also getting this same issue. Please help me.
sp_grewal said:
Please note that I have done search and tried various solutions before starting this thread :
Hi My A6000 phone got factory reset and then I tried to recover some lost pics...but I was advised that my phone needs to be rooted first, so the software opened kingo root soft, It showed me the message that phone has been rooted and when it rebooted there was a notification of software update which I said ok and ever since then the phone is stuck on system recovery mode (not sure if it is called soft brick or not) and I have tried many things including choosing all the options starting from reboot system now, apply update from ADB, wipe data/factory reset, wipe cache partition, apply update from sdcard but nothing seems to work!!! oh I for got to mention on the top of the screen it says Androoid system recovery <3e>Kraft -A6000_S035_150507 and then gives all the option and i have tried this following :
https://boycracked.wordpress.com/2015/06/03/unbrick-lenovo-a6000/
but some how for the first solution it keeps on saying download failed, emergency recovery download failed...anyways it does not work
I have also tried this
http://forum.xda-developers.com/chef-central/android/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247
but it has ADB killed (tried looking and installing adbfixer solution--it says it cannot finf adb.exe even though it is there)
Is there any soultion to this!!! Please help if there is one!
Click to expand...
Click to collapse
Recently I was tried to update mobile firmware (latest Kraft-A6000-S_S014_150730) by OTA update (via system settings->about phone->system update), that time my mobile was soft bricked like above you said. I downloaded firmware and installed then some time after got some options menu. And I attached that problem as picture.
Before that I rooted my mobile using KINGROOT apk v4.0 , there after I did unroot again using in the same app.
I thought unrooted mobile does not affect by system update (any firmware or OTA update by LENOVO). But unfortunately my mobile got problem.
I didn't took any backup before that. I don't know anything about CWM backup and all. I know only the root and unroot using KINGROOT app.
I need to recover my mobile back or tell me how to install LENOVO A6000 PLUS stock ROM or any other way is there tell me to solve the problem. Please guide me step by step process or any video link there it was little better to understand for me.
Please help me, it will be appreciated. Thanks.
Attach the device to PC through USB cable and Install the CWM through ADB .
Install the Stock Kernel through Update Zip option within the CWM.
That will freshly installs the Android OS.
Hello guys.
I have an LG L5 (E610) that is having a very strange behavior.
It started by throwing a lot of ANR with different applications (Google Play Store, Play Services, Facebook, and others).
So, seeing this, I decided to do a factory reset. After reboot, what is my surprise that I see everything as I had before. All the applications, all the data, everything.
With this, I tried almost everything at the moment. And by saying that, I mean:
- Tried to follow the key combination for the recovery, it goes to recovery, I see the Android and some progress bar moving, but after the reboot, the system remains with no change;
- When on the system, I uninstall applications, they seem to be uninstalled, but after a reboot all the applications are back.
- Tried to root the phone with more than one process, no success. I cannot install any application. Not via play store, not via adb install, there is no way;
- Tried to flash a recovery img, to try to clean cache partition from there, no luck. From Fastboot it says everything went well, but when I reboot, everything is the same;
- In fastboot, I tried to erase cache and userdate partitions, no luck. When I try, i have a message saying "FAILED (status read failed (Too many links))". This happens with all the partitions. I even tried to erase the system partition, and I have the same response. Strange thing is that after this error, the phone reboots and goes directly to the system;
- Tried with KDZ images and tools to install different versions, I receive errors during the deployment and at the end the phone reboots. Again, the same system is installed as before. No changes.
As of now, I was trying to understand if there is any problem with the internal flash system. Maybe it is corrupted and is causing all these issues.
The thing is, as the phone is not rooted, I cannot launch a e2fsck to the maybe faulty mmcblk0pXX
The phone has a stock ROM based on Android 4.0.3 (build IML74K / LG-E610-V10e-JUN-30-2012)
I am out of ideas, I've looked around here at XDA, Google and I have no other ideas to try.
Does anyone have another suggestion?
Is there something else I can do to try to make the phone live again?
Any help someone can provide will be very much appreciated..
Now this is what I call a coincidence.
About 2 years ago, a friend of mine asked me for help with her E610. Almost all actions were giving us ANRs. Whatever you do, i.e. unsinstall, install, change, delete... after reboot/reset were all there, even notifications! Tried KDZ updater, and, while the update was OK without signs of errors or so, after reboot - nothing, everything was like before. After trying to find a solutions by hundreds of ways, with adb and fastboot commands (all partitions&folders were locked, no read, no write, and you can't see any file, tried root to no avail), L5 got bricked. She already got a new phone and this LG was laying there without any use.
Three days ago I decided to try again, with no hope tbh No screen, no vibration, nothing, apparently dead. But, I could install Qualcomm drivers and my Windows can see it in download mode. I think that the only way is to flash the phone with LGFlashTool and using COM port. I already extracted *.dz from *.kdz but I need the dll for FlashTool. Found 2 or 3 webs with this dll, but you need a 100 bucks subscription :crying: If anyone can upload that dll I'd be very happy to try to flash this phone I'm really big n00b in this, just a plain phone user, nothing more, so don't blame me if I said something wrong
Many thanks in advance.
same problem
Hello! Same problem...
My L5 is making me crazy... It has CyanogenMod 10 nighlty. A friend of mine was using it and he tried to install the GAPPS after he did a factory reset. I have no idea what guide he used but it got soft bricked... It's constantly showing a "stopped working" message and after a while reboots by itself.
I tried to do a factory reset but it always returns to the same point, same apps installed, everything like the reset never happened. I even used CWM to reset it and it allways goes back to the same recovery point.
After a while I decided to flash a stock room but here's the problem: I can't get into emergency mode.
After reading ALL post about it I found that there's at least three ways of entering EM, (1) down VOL and plug in usb cable without battery; (2) down+up VOL and plug in usb; (3) down+up VOL + power botton.
Conclusions:
(1) - gives me a screen full of code like a command line
(2) - White screen
(3) - White screen
I've read ALL the unbrinking post on the internet, including xda, and none of them helped.
The KDZ Updater never recognizes the phone. I installed all the drivers but everytime I plug in the phone it installes the same LGE MTP drive...
Can anyone help, please?!
How to enter Emergency mode? How to flash another rom?