Related
helloo everyone!
basically what i did was backed up my current stock froyo rom, and then followed the steps for the "deblurred gingerbread rom" on how to flash it, i then went to reboot my phone.and got stuck on the M logo have pulled the battery several times im lost at what to do so please anyone help? i would be very grateful
you should press volume-down + camera key both, and poweron your phone to enter bootloader to flash the fixedsbf.
it will not automatically enter to the bootloader.
how do i go about flashing the fixed sbf?
i put my phone into bootloader and opened rsd lite and my phone wasnt recognised?
what am i meant to do
All the information is findable on this forum!
First; the howto flash SBF: http://forum.xda-developers.com/showthread.php?t=1032372
Second; the SBF file you need to flash: http://www.multiupload.com/KL6LSHIRCS
So with that howto you need to flash the SBF provided in this post. After that it'll work.
when i plug my phone into the computer in bootloadermode and find the sbf file in rsd and press start, nothing happens? i have motorola driver installed?
Can you post a screenshot of RSD Lite with your phone connected and the SBF selected?
Also try to reboot and try again.
i was playing around with different things and managed to get my phone mounted to rsd the phone has booted! i did a full data wipe and cache wipe and im just restoring my apps back with titanium backup, if i wanted to have all the blur services, would i now be able to restore the nand backup of the other gingerbread rom? or would i have to go through the whole process again?
If you want the Blur services now you just need to flash the MS2Ginger Nandroid in CWM.
...and the other way around offcourse. hf!
Ok guys..... newbie here .... literally I'm new to Boot unlocking, root, Flashing etc.
Anyway I have followed this forum for so long that I decided to take plunge yesterday and get my hands dirty.
Here is what I did:
Unlock bootloader, root and install recovery on my Atrix 4G. Atrix was @ 2.3.4 and 4.5.91 during unlocking & root.
Rebooted the phone and everything seems to be in place. Atrix loaded like the way I bought it 7 months back. No problem until now.
Also created a restore folder on my external SD. Worked fine and was successful in creating backup with time stamp
Now here are my steps and subsequent issues that I'm facing:
1. Downloaded CM9 zip file from this thread(http://forum.xda-developers.com/showthread.php?t=1500535) along with Gapps to my external SD
2.Entered recovery mode during bootup and tried to flash CM9 and Gapps. Flashing seem to have gone well and completed (note I did not do clear data, clear cache or clear dalvik cache under advanced options being a newbie)
3. Reboot the phone and can only see red Moto logo and unlocked on top. Left for about 5 minutes and nothing happened.
4.Did a battery pull and entered recovery mode. wiped data, cache & cleared dalvik cache
5.Went to Install zip from sdcard option and tried to reflash CM9. Flashing seems to have gone well and completed
6. Reboot phone and again can only see Moto Red logo with unlock on top and nothing more.
7.Battery pull followed by recovery. But This time I tried to restore from my external SD. also wiped data, cache & dalvik cache
8.Restore took about 3 minutes and completed.
9.Reboot the phone. Now the phone boots and goes to Rethink possible screen and get sstuck.
10. Left it for 1 hr....nothing.
11.tried steps 7-9 again and still stuck in "Rethink possible" screen during boot.
What did I do wrong? Did I soft brick the phone? I can still enter recovery mode and read my internal and external SD and can see all files. i hope I didn't brick my phone doing this. If I did, I would regret!
Here are my options:
1.Try a stable ROM like CM7 and see what happens. I didn't want to do too much damage so haven't tried this option yet.
2.I know there is a way to hide 'unlock' during boot up (if someone can point to it obviously). Hide the 'unlock' and return the phone to ATT and tell them that phone would not boot after 2.3.6 update and get a refurbished one
Please let me know what your thoughts are. I'm currently crapping on my pants
Edit: I just tried Newtrino rom and stuck @ Moto screen which says unlock.
Edit 3/4/2012: Please go to the last post for the solution. Tenfar's CWM is old and cannot deal with latest ROMs. Use ROMRACERS latest CWM or touch based Koush's CWM for future ROM flashing.
Old CWMs will give you sleepless nights!
Ok tried restore again after wiping data, cache & dalvik cache.
Now after reboot, My Moto Logo screen says unlock and just starts flashing.
I can still get into recovery......
can someone please help me......
What you can do is: install a "stable" ROM of Gingerbread:
--Go in recovery, put a .zip of the ROM on your sdcard (with your computer), and after wiping data, install it .zip.
--Or you install a new ROM with fastboot
Anyway, be careful with your battery, because if it is empty, with no ROM on your phone, it'll be crap!
vsg005 said:
What you can do is: install a "stable" ROM of Gingerbread:
--Go in recovery, put a .zip of the ROM on your sdcard (with your computer), and after wiping data, install it .zip.
--Or you install a new ROM with fastboot
Anyway, be careful with your battery, because if it is empty, with no ROM on your phone, it'll be crap!
Click to expand...
Click to collapse
thank you for your response. However I tried that already Nutrino GB ROM. Again, I would go to 'M' screen which says unlocked and its stuck there for ever.
I used tenfar's CWM. Not sure if I need to use any other CWM. Also since my phone doesn't boot, I'm not sure how I can install any other CWM
Masterguy said:
thank you for your response. However I tried that already Nutrino GB ROM. Again, I would go to 'M' screen which says unlocked and its stuck there for ever.
I used tenfar's CWM. Not sure if I need to use any other CWM. Also since my phone doesn't boot, I'm not sure how I can install any other CWM
Click to expand...
Click to collapse
Don't worry, soft bricks are easy to recover on the Atrix thanks to us being able to access fastboot.
For flashing a new recovery:
While your phone is off, press Volume Up + Power to power up, then release when a menu appears on your screen and navigate with volume down until you see Fastboot, select it with the volume up key.
Get the necessary files for fastboot, place them all in a folder called "moto" in your C: drive, and type in the following in a cmd window (assuming you're using windows and that the recovery image is called recovery.img):
C:/Moto> fastboot flash recovery recovery.img
C:/Moto> fastboot -w
C:/Moto> fastboot reboot
Now access your recovery wipe dalvik cache, cache, factory reset and then flash a new ROM. It SHOULD boot without issues. I personally use Koush's Clockworkmod Touch, also remember that Neutrino tends to get "stuck" sometimes after the first attempt to boot and requires a battery pull and then you try to boot again. (It takes a while)
littleemp said:
Don't worry, soft bricks are easy to recover on the Atrix thanks to us being able to access fastboot.
For flashing a new recovery:
While your phone is off, press Volume Up + Power to power up, then release when a menu appears on your screen and navigate with volume down until you see Fastboot, select it with the volume up key.
Get the necessary files for fastboot, place them all in a folder called "moto" in your C: drive, and type in the following in a cmd window (assuming you're using windows and that the recovery image is called recovery.img):
C:/Moto> fastboot flash recovery recovery.img
C:/Moto> fastboot -w
C:/Moto> fastboot reboot
Now access your recovery wipe dalvik cache, cache, factory reset and then flash a new ROM. It SHOULD boot without issues. I personally use Koush's Clockworkmod Touch, also remember that Neutrino tends to get "stuck" sometimes after the first attempt to boot and requires a battery pull and then you try to boot again. (It takes a while)
Click to expand...
Click to collapse
Many people also seem to have suggested RACEROM CWM. Which one would you suggest? I'm so nervous about all this now. Just have this butterfly in my stomach
flash the latest recovery and wipe everything in recovery and flash neutrino again. It should work after that. try neutrino 2.2 though. 2.5 still has it's kinks.
1st off, relax. It's difficult to brick your phone from this point Just don't get any bright ideas with .sbfs lol.
As others have said, make sure you're on latest recovery.
Question: are you installing from internal or external SD? Internal is recommended for flashing most ROMs.
Sent from my MB860 using xda premium
Masterguy said:
Many people also seem to have suggested RACEROM CWM. Which one would you suggest? I'm so nervous about all this now. Just have this butterfly in my stomach
Click to expand...
Click to collapse
As someone else said, the ONLY thing you should NEVER do is flash an .sbf or go through an OTA update, that's a surefire way to hard brick your phone. From this point on it's VERY DIFFICULT to completely brick your phone using software only.
RomRacer's CWM is based I think on v5.0.2.7? Koush's latest recovery is v5.8.1.5. I honestly couldn't name any tangible differences other than the touch interface, which is the reason I use it in the first place. (I hate mashing volume keys like a madman) It really doesn't matter which CWM you use, but when I soft bricked my phone I recovered with CWM Touch.
I would recharge your battery to 100% before trying to recover it, as that is one less headache to worry about, but if your phone starts saying 'Battery is too low to flash', do not panic, you only need a USB cable you don't mind sacrificing (doesn't have to be new). I will go into detail in case you actually need to do this.
Just make sure you use the fastboot -w command and wipe EVERYTHING through CWM before trying to flash anything else.
Solved:boot loop issue
littleemp said:
As someone else said, the ONLY thing you should NEVER do is flash an .sbf or go through an OTA update, that's a surefire way to hard brick your phone. From this point on it's VERY DIFFICULT to completely brick your phone using software only.
RomRacer's CWM is based I think on v5.0.2.7? Koush's latest recovery is v5.8.1.5. I honestly couldn't name any tangible differences other than the touch interface, which is the reason I use it in the first place. (I hate mashing volume keys like a madman) It really doesn't matter which CWM you use, but when I soft bricked my phone I recovered with CWM Touch.
I would recharge your battery to 100% before trying to recover it, as that is one less headache to worry about, but if your phone starts saying 'Battery is too low to flash', do not panic, you only need a USB cable you don't mind sacrificing (doesn't have to be new). I will go into detail in case you actually need to do this.
Just make sure you use the fastboot -w command and wipe EVERYTHING through CWM before trying to flash anything else.
Click to expand...
Click to collapse
Thanks I was able to fix my boot up issue using ROMRACERS CWM. I didn't use any command prompt or anything. I just downloaded zip file from this thread, entered recovery mode -->Install Zip from SD card --> Chose ROMRACERS zip --> it automatically flashed the recovery and I then rebooted recovery under advanced options.
After that Wiped data,cache & Dalvik Cache and proceeded to install CM9 and it booted up up flawlessly.
I'm kind of surprised that tenfar didn't add a not to use his CWM as the latest ROMs use latest ext format.
That seems to be issue. However, I'm pleased with your guidance and final output. Thanks a lot dude.
Masterguy said:
Thanks I was able to fix my boot up issue using ROMRACERS CWM. I didn't use any command prompt or anything. I just downloaded zip file from this thread, entered recovery mode -->Install Zip from SD card --> Chose ROMRACERS zip --> it automatically flashed the recovery and I then rebooted recovery under advanced options.
After that Wiped data,cache & Dalvik Cache and proceeded to install CM9 and it booted up up flawlessly.
I'm kind of surprised that tenfar didn't add a not to use his CWM as the latest ROMs use latest ext format.
That seems to be issue. However, I'm pleased with your guidance and final output. Thanks a lot dude.
Click to expand...
Click to collapse
Thank you sooo much. I was having this exact problem. I did what you suggested and my phone works. Thanks!
i flashed the CWM update zip, booted into CWM, wiped, and now im trying to install the EOS rom
it goes smoothly and i get no errors, but it boots into CWM every single boot now.,,
Pushed the older 6006 cwm and flashed, no errors, still boots into 6010.. ?
http://forum.xda-developers.com/showthread.php?p=22897771
Found this thread. For transformer Prime but hopefully it fixes my issue. If this is a bad idea lmk.
If not, Will try around midnight when I get back home
Woops,
Found this too
http://forum.xda-developers.com/showthread.php?t=1781250
Did you flash the CWM.zip in TWRP? I ask because there was a known issue when flashing CWM from TWRP you would get stuck in a recovery loop. I had the same issue and had to flash the stock .img to get out of it. Good luck.
i flashed the CWM zip that was posted in the CWM thread, bout to try and get myself free..
::success.
booted into bootloader
flashed bootloader, restarted, booted into my rom...
rebooted back into bootloader
flashed recovery
wipe/flash normally
I'm in the same exact situation, Could you share with me how you got it to boot into bootloader? I've been trying for awhile now. As I'm stuck in CWM I'm thus far unable to use adb. I'm a total adb noob so there is probably something quite simple I'm missing. Thanks in advance for any help.
Vektor67 said:
I'm in the same exact situation, Could you share with me how you got it to boot into bootloader? I've been trying for awhile now. As I'm stuck in CWM I'm thus far unable to use adb. I'm a total adb noob so there is probably something quite simple I'm missing. Thanks in advance for any help.
Click to expand...
Click to collapse
Press volume down when it boots (right before and while the Google logo shows up)
jamesst20 said:
Press volume down when it boots (right before and while the Google logo shows up)
Click to expand...
Click to collapse
Thanks for the reply, I've tried that many times. It's not working. I wish I had read this thread carefully and learned that it might be dangerous to flash cwm zip from TWRP, I had no idea.
The thing is is that it never really shuts down properly(thought I remembered a power off option on one of my epic 4g cwm) So when I press the power button while on the reboot system now option, that is what it does but back to recovery. I tried the volume button as you suggested as well as every other combination I could think of. :~(
Well in messing with drivers(uninstalling old drivers/devices installing universal naked driver) I had the nexus 7 q3 tool waiting for adb to enter fastboot and reflash TWRP so I could restore) and the tool suceeded in kicking me into fastboot(with an error in the toolkit) The toolkit stopped communicating though. I want to use the toolkit to reflash back to stock now that I'm in the bootloader screen.
I'm a bit nervous though, some warning about flashing asus stock blobs being a sure way to HardBrick. I think I'll wait until I get better information. I am on the bootloader screen, but I'm certain my bootloader as it sits is messed up from flashing CWM.
*Edit* Success!! I used this ; "[Guide] Returning to Stock and/or Unbricking your device"located here, http://forum.xda-developers.com/showthread.php?t=1781250 (not sure how to go about inserting a descriptive link sry :~( I'm now back to stock and ready to brick it again...umm, I mean, root and flash like there's no tomorrow. hehe Thanks for the input.:good::good:
Hi all
I use to run cm-7.2 Jordan without any issues. Decided however to upgrade and test cm10 but since I didn't find it stable enough I decided to downgrade back to 7.2. The flash succeed without issues but when I reboot I get stuck with the Google logo and the os never boot up.
I tried to go through cm.7.1 but no luck there, same issue.
Any clue how i can resolve this?
llavsor said:
Hi all
I use to run cm-7.2 Jordan without any issues. Decided however to upgrade and test cm10 but since I didn't find it stable enough I decided to downgrade back to 7.2. The flash succeed without issues but when I reboot I get stuck with the Google logo and the os never boot up.
I tried to go through cm.7.1 but no luck there, same issue.
Any clue how i can resolve this?
Click to expand...
Click to collapse
Try to wipe all from stock recovery ----> Power+Vol dwn
Kayant said:
Try to wipe all from stock recovery ----> Power+Vol dwn
Click to expand...
Click to collapse
Thanks for quick reply. I tried that and the phone loaded a android character with a triangle and a exclamation mark. I don't have a good feeling about that
llavsor said:
Thanks for quick reply. I tried that and the phone loaded a android character with a triangle and a exclamation mark. I don't have a good feeling about that
Click to expand...
Click to collapse
That's good sorry forget to say you need to hold VOL dwn& Vol Up at the same time then wipe all...
Good luck
Exactly the same problem here, cannot downgrade to CM7.
Any good news?
Flash official froyo (I used ver 2.2.2)sbf via rsdlite. Root it using superoneclick and install 2init bootmenu 2.0. In custom recovery do full factory wipe follow with restore your nandroid 7.2 if you have them. If it booting hang at start screen, flash any froyo fixed sbf that contain the froyo kernel(optional). This way all your previous user data will still be intact.
Sent from my awesome rooted Defy: 2.3.6 XDA premium
So the recovery won't work and will have to start with SBF. Will wait until I have the computer environment to do so.
Thanks!
Kayant said:
Try to wipe all from stock recovery ----> Power+Vol dwn
Click to expand...
Click to collapse
farsight73 said:
Flash official froyo (I used ver 2.2.2)sbf via rsdlite. Root it using superoneclick and install 2init bootmenu 2.0. In custom recovery do full factory wipe follow with restore your nandroid 7.2 if you have them. If it booting hang at start screen, flash any froyo fixed sbf that contain the froyo kernel(optional). This way all your previous user data will still be intact.
Sent from my awesome rooted Defy: 2.3.6 XDA premium
Click to expand...
Click to collapse
Okey I have now flashed 2.2.2 sbf with RSDlite and after flash the phone still hangs during boot, now with the ugly Motoroly M instead of the Google logo from CM. So I guess I am back to square one, any idean anyone
llavsor said:
Okey I have now flashed 2.2.2 sbf with RSDlite and after flash the phone still hangs during boot, now with the ugly Motoroly M instead of the Google logo from CM. So I guess I am back to square one, any idean anyone
Click to expand...
Click to collapse
Wipe all from stock recovery that's you needed to do btw before installing cm7.... Sbf is not needed.
Go to stock recovery and wipe all your ROM should boot...
Let's Go ^_^
llavsor said:
Okey I have now flashed 2.2.2 sbf with RSDlite and after flash the phone still hangs during boot, now with the ugly Motoroly M instead of the Google logo from CM. So I guess I am back to square one, any idean anyone
Click to expand...
Click to collapse
Factory reset from stock bootmenu again. If it still hangs, flash sbf again with another factory reset afterwards just to be safe. BTW, I've had times where 3+ sbf flashes with factory resets were needed to get the phone to boot again.
One problem you might be having is if you formatted /data and /cache to ext4. Maybe it was just me, but I had to reinstall CM10, change back to ext3, flash sbf, then install CM7. Changing to ext3 and flashing CM7 didn't work -- same problem you're having. I wasn't sure if ext4 was the problem so I made sure I changed back to ext3 before sbf flashing. I'm not sure if the sbf reformats the partitions or just wipes them like a factory reset. If you've already flashed the sbf, then you can't install a CM10 rom to change back to ext3... Worse come to worse, you maybe able to install one of the custom sbf's with CM10 custom kernel preinstalled, change to ext3, flash official sbf, factory reset, then install CM7. I haven't looked into them because I make my own custom sbf's .
Bravo users are having this exact problem and my solution is to ensure that /data and /cache are ext3, flash the sbf and start from scratch -- the only guaranteed way I know of to fix this problem. Another Bravo user had the same problem and managed to fix it by changing some /data permissions over adb -- the user didn't specify the exact things done so I'm waiting on a reply with more details.
skeevy420 said:
Factory reset from stock bootmenu again. If it still hangs, flash sbf again with another factory reset afterwards just to be safe. BTW, I've had times where 3+ sbf flashes with factory resets were needed to get the phone to boot again.
One problem you might be having is if you formatted /data and /cache to ext4. Maybe it was just me, but I had to reinstall CM10, change back to ext3, flash sbf, then install CM7. Changing to ext3 and flashing CM7 didn't work -- same problem you're having. I wasn't sure if ext4 was the problem so I made sure I changed back to ext3 before sbf flashing. I'm not sure if the sbf reformats the partitions or just wipes them like a factory reset. If you've already flashed the sbf, then you can't install a CM10 rom to change back to ext3... Worse come to worse, you maybe able to install one of the custom sbf's with CM10 custom kernel preinstalled, change to ext3, flash official sbf, factory reset, then install CM7. I haven't looked into them because I make my own custom sbf's .
Bravo users are having this exact problem and my solution is to ensure that /data and /cache are ext3, flash the sbf and start from scratch -- the only guaranteed way I know of to fix this problem. Another Bravo user had the same problem and managed to fix it by changing some /data permissions over adb -- the user didn't specify the exact things done so I'm waiting on a reply with more details.
Click to expand...
Click to collapse
Okey good advice.
Here is where I am at now. I have flashed a number of different SFBs and I end up with the same situation every time. RSDLIte finish the process nicely but the phone get stuck with the flashing M. When I reboot manually I get passed the M and to the Android text/logo and there I get stuck.
I get advice to do a factory reset but how do I do that. The CW bootloader is gone and I can't get to the original boot loader either. I hit volume down and power, get to the triangle screen where I am supposed to hit the right bottom corner but nothing happens.
So I cant boot the phone to get into a menu where I can change to ext3 if this is a problem.
Please help, how can I get further?
Since I have no luck restoring stock rom I now have the following plan.
Install ClockWorkMod recovery with ADB.
Using recovery to do a factory reset and clear cache.
Flash a CM10 ROM (or any rom that will successfully boot up my phone).
From that start over to downgrade to CM9 to find a stable ROM.
The question I have now is if I will be able to use ADB with the USB connection mode I get from the bootloader (volume up+pwr button)? Or does ADB actually require that I can boot my phone and go into some other USB mode such as UMS or MTP.
Second question. Playing with restoring stock ROM i run out of battery and now my defy wont charge (only see a big question mark when loading). Seems like I get no power when USB is connected so is there a way for me to charge the battery or do I need to find another happy camper in town with a working defy that can power up my battery?
llavsor said:
Okey good advice.
Here is where I am at now. I have flashed a number of different SFBs and I end up with the same situation every time. RSDLIte finish the process nicely but the phone get stuck with the flashing M. When I reboot manually I get passed the M and to the Android text/logo and there I get stuck.
I get advice to do a factory reset but how do I do that. The CW bootloader is gone and I can't get to the original boot loader either. I hit volume down and power, get to the triangle screen where I am supposed to hit the right bottom corner but nothing happens.
So I cant boot the phone to get into a menu where I can change to ext3 if this is a problem.
Please help, how can I get further?
Click to expand...
Click to collapse
In froyo, you should hit vol up/down together to enter stock recovery.
If you have your cm7 nandroid or your gingerbread nandroid 2.3.6. In,custom recovery cm10, restore them. Your phone would not boot but you have your cm7 or gingerbread cwm by then, that you could format cache and total wipe back to ext.3 in the recovery menu, format/wipe follow with another nandroid restore and flash fix sbf from rsdlite.
But then the best way is go back totally clean by flashing stock froyo and root, install 2init with bootmenu 2.0. Then total wipe in recovery follow with restore your cm7 or gingerbread nandroids and flash the corresponding fix sbf via rsdlite.
Charging dead rom defy would need the MacGyver trick then. But some say if you leave it connected overnight in pc usb would charged it somehow but slow..
On 2nd thought.. you need to tell us yoyr defy model...green lense, red lense or the defy plus?? These models has their own characteristics in term of play around in cwm and way of flashing..
Sent from my awesome rooted Defy: 2.3.6 XDA premium
farsight73 said:
In froyo, you should hit vol up/down together to enter stock recovery.
If you have your cm7 nandroid or your gingerbread nandroid 2.3.6. In,custom recovery cm10, restore them. Your phone would not boot but you have your cm7 or gingerbread cwm by then, that you could format cache and total wipe back to ext.3 in the recovery menu, format/wipe follow with another nandroid restore and flash fix sbf from rsdlite.
But then the best way is go back totally clean by flashing stock froyo and root, install 2init with bootmenu 2.0. Then total wipe in recovery follow with restore your cm7 or gingerbread nandroids and flash the corresponding fix sbf via rsdlite.
Charging dead rom defy would need the MacGyver trick then. But some say if you leave it connected overnight in pc usb would charged it somehow but slow..
On 2nd thought.. you need to tell us yoyr defy model...green lense, red lense or the defy plus?? These models has their own characteristics in term of play around in cwm and way of flashing..
Sent from my awesome rooted Defy: 2.3.6 XDA premium
Click to expand...
Click to collapse
Thanks for very informative reply. I have a Defy 525 with red lens.
It's working.
I found a friend blessed with a defy and used that to charge the battery, tried to charge it over night with USB but it didn't work.
I then followed the steps from the last post and managed to flash a stock rom and then from there I rooted the phone with SuperOneClick, installed 2ndInit with ADB (guess you could use an apk installer from the phone as well ). I booted into recovery and flashed 7.2.0 Jordan from CM and now I am where I started a few weeks back.
Thank you all for your help.
That was the low battery problem.......
Since i had this i allways look for a full battery
If you think your defy is dead , a look for a empty battery won't be mad
Could anybody took a reminder info into beginners guide
MB525 red lense
I've done the following to my new, out-of-the-box Droid Razr M (XT907):
- Rooted it
- Unlocked the bootloader
- Installed CWM recovery
Booted into the CWM recovery mode, I cleared the memory, cache, and while trying to flash an Eclipse JellyBean custom ROM, the process failed (alas, I didn't capture the error msg, but I recall it being a bit vague). I (perhaps foolishly) rebooted using the CWM menu after this failure. Since then, the phone has been stuck in the "WARNING BOOTLOADER UNLOCKED" screen (scrshot attached). I'm able to enter the AP FastBoot mode using Power+VolumeDown, but trying to flash a stock ICS ROM using RSD is failing as well.
I'm kinda stuck at this point, and would highly appreciate any useful advice. The AP FastBoot screen says "Battery Low!" so I'm not really sure how much time I have. I've kept it connected to my PC via USB, but I'm not sure if that charges the battery or not.
Thanks much!
l_klusener said:
I'm kinda stuck at this point, and would highly appreciate any useful advice.
Thanks much!
Click to expand...
Click to collapse
To bo clear, I'd like to take the phone from its current state to _some_ working state, whether it's by flashing a custom ROM or by unrooting it and taking it back to a factory state (assuming that's even possible), so that I can fully charge it and then make another attempt of flashing a custom ROM onto it.
Thanks!
If I were you, I would download RSD, boot the phone into Fastboot AP, and flash the 4.1.1 stock image. If you download the Razr M Utility 1.10, it will have both RSD, the motorola drivers, and the stock image. It can be found here: http://forum.xda-developers.com/showthread.php?t=2207419
NOTE: Your battery should be at 100% for the flash according to the original post in that topic. I would leave it attached to the computer for a few hours or put it on the wall charger for a few hours before going any further.
l_klusener said:
To bo clear, I'd like to take the phone from its current state to _some_ working state, whether it's by flashing a custom ROM or by unrooting it and taking it back to a factory state (assuming that's even possible), so that I can fully charge it and then make another attempt of flashing a custom ROM onto it.
Thanks!
Click to expand...
Click to collapse
You could also flash cm10, either would work. Cm10 would bypass the issue of undoing your custom recovery
Sent from my XT907 using Tapatalk 2
l_klusener said:
I've done the following to my new, out-of-the-box Droid Razr M (XT907):
- Rooted it
- Unlocked the bootloader
- Installed CWM recovery
Booted into the CWM recovery mode, I cleared the memory, cache, and while trying to flash an Eclipse JellyBean custom ROM, the process failed (alas, I didn't capture the error msg, but I recall it being a bit vague). I (perhaps foolishly) rebooted using the CWM menu after this failure. Since then, the phone has been stuck in the "WARNING BOOTLOADER UNLOCKED" screen (scrshot attached). I'm able to enter the AP FastBoot mode using Power+VolumeDown, but trying to flash a stock ICS ROM using RSD is failing as well.
I'm kinda stuck at this point, and would highly appreciate any useful advice. The AP FastBoot screen says "Battery Low!" so I'm not really sure how much time I have. I've kept it connected to my PC via USB, but I'm not sure if that charges the battery or not.
Thanks much!
Click to expand...
Click to collapse
did you mount system before you flashed?
I think the Razr M Utility 1.10 can save your phone, it flash the stock rom by fastboot, not by RSD, and it will do the work. I've try it.
Coronado is dead said:
If I were you, I would download RSD, boot the phone into Fastboot AP, and flash the 4.1.1 stock image. If you download the Razr M Utility 1.10, it will have both RSD, the motorola drivers, and the stock image. It can be found here: http://forum.xda-developers.com/showthread.php?t=2207419
NOTE: Your battery should be at 100% for the flash according to the original post in that topic. I would leave it attached to the computer for a few hours or put it on the wall charger for a few hours before going any further.
Click to expand...
Click to collapse
Apologies for the delayed response here.
I followed these instructions, and it worked wonderfully. My phone is now restored to the stock image, so a huge thanks there!
shane1 said:
did you mount system before you flashed?
Click to expand...
Click to collapse
Are you referring to my attempt at flashing the custom ROM? I don't think I mounted anything. I copied the custom ROM .zip file onto the phone's SD card, booted into the CWM recovery mode, wiped out the data, cache, and dalvik cache. I then selected the "Install zip from SD card" option followed by selecting the zip I copied earlier.
Did I miss an important step here? The instructions I followed were from an external (i.e., non xda-developers) site. I'll try to look for better instructions on this forum, but if you have a pointer handy, I'd appreciate it.
Once again, thanks for saving my phone guys. I was beginning to lose hope