Flashing firmware. - Galaxy S 4 Q&A, Help & Troubleshooting

In this thread http://forum.xda-developers.com/showthread.php?t=2252855 people sharing the kernels with the rom updates. Do i need to flash kernel after i flashed the stock rom ? or is it added for people who are using a custom kernel ?

Deleted

C.Sweat said:
Deleted
Click to expand...
Click to collapse

MichelN said:
In this thread http://forum.xda-developers.com/showthread.php?t=2252855 people sharing the kernels with the rom updates. Do i need to flash kernel after i flashed the stock rom ? or is it added for people who are using a custom kernel ?
Click to expand...
Click to collapse
Hi,
Stock ROMS include kernels.
No need to flash separately.

Yeah that's what i thought too, but i am new with the s4 and saw those kernels serperated in the thread so i needed to ask.
Thanks for the answer :good:

Related

[Q] kernel question

if i download a rom than a kernel. than i download a different a rom will i have that kernel i download.
danzelcool said:
if i download a rom than a kernel. than i download a different a rom will i have that kernel i download.
Click to expand...
Click to collapse
You'll have to reflash that kernel on the new rom
Good thread you might wanna look at.. Lots of helpful information..
http://forum.xda-developers.com/showthread.php?t=2295557
Sent from my GOLDENEYED AT&T S4
rcklss1 said:
You'll have to reflash that kernel on the new rom
Good thread you might wanna look at.. Lots of helpful information..
http://forum.xda-developers.com/showthread.php?t=2295557
Sent from my GOLDENEYED AT&T S4
Click to expand...
Click to collapse
how do i go back to the stock kernel on the rom i download the kernel
danzelcool said:
how do i go back to the stock kernel on the rom i download the kernel
Click to expand...
Click to collapse
The new ROM will come with its own kernel.. If you want to use your downloaded kernel you have to reflash it.. If you want to go back to the stock att kernel it can be found in that thread I linked to
Sent from my GOLDENEYED AT&T S4
Either someone has to provide a stock flahsable kernel if the ROM comes packed with a different one. Or you have to run a stock based ROM packed with the stock kernel..
If that doesn't answer your question I dont get what your asking then...
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

Closet to Original Rom?

Hi, I have been looking for a Custom Rom with a Custom Karnel that has a closest look to the original rom. Does any one has any opinions??
tnx
I would recommend the following, because of my experience with them.
1. SaberMod or RasSaber (the first ROM comes with Saber-toothed-Squirrel kernel)
2. Purity (comes with Purified kernel)
You can find those, along with tons of other ROMs to choose from, here: http://forum.xda-developers.com/showthread.php?p=34474641
From your post I'm gathering that you don't want to mess around too much with the settings and just have a solid, stable system. The stock "look" is easily obtained by just flashing a new ROM and not touch anything in the custom settings, after all. Correct me if I'm wrong.
alipashang77 said:
Hi, I have been looking for a Custom Rom with a Custom Karnel that has a closest look to the original rom. Does any one has any opinions??
tnx
Click to expand...
Click to collapse
Lots of people are running stock rom (rooted) with a custom kernel... You can even find pre-rooted/bb'ed stock rom like this one:
http://forum.xda-developers.com/showthread.php?t=2147281
CyanogenMod FTW!
mlag said:
I would recommend the following, because of my experience with them.
1. SaberMod or RasSaber (the first ROM comes with Saber-toothed-Squirrel kernel)
2. Purity (comes with Purified kernel)
You can find those, along with tons of other ROMs to choose from, here: http://forum.xda-developers.com/showthread.php?p=34474641
From your post I'm gathering that you don't want to mess around too much with the settings and just have a solid, stable system. The stock "look" is easily obtained by just flashing a new ROM and not touch anything in the custom settings, after all. Correct me if I'm wrong.
Click to expand...
Click to collapse
Exactly, Thanks very much, I'm really tired with beta and non-stable roms and I want something stock-like
ameinild said:
Lots of people are running stock rom (rooted) with a custom kernel... You can even find pre-rooted/bb'ed stock rom like this one:
http://forum.xda-developers.com/showthread.php?t=2147281
Click to expand...
Click to collapse
Can you suggest me some stable and Deodexed karnel? thanks anyway
alipashang77 said:
Can you suggest me some stable and Deodexed karnel? thanks anyway
Click to expand...
Click to collapse
No such thing as a deodexed kernel. All custom ROMs are deodexed.
Sent from my Nexus 4 using Tapatalk 2
alipashang77 said:
Can you suggest me some stable and Deodexed karnel? thanks anyway
Click to expand...
Click to collapse
Most custom kernels are generally stable, have a look in the index thread:
http://forum.xda-developers.com/showthread.php?t=2006616
franco and faux are both popular choices, although I find faux settings a little complicated...

[Q] Help with ROM

As you guys may know, I recently downloaded the latest matriz mod by mathkid...do you think I need a ROM installed to use at its full potential? If so, which ROM should I install and do I have to re-install the kernel?
1. U don't have to flash another ROM if you are on stock ROM or another AOSP ROM
2. Feel free to flash any ROM u want all AOSP based Ron's should work with this kernel.
3. If u flash another ROM u have to flash the kernel again because the stock kernel of the ROM will be flashed as well.
BTW. Post this kind of questions into the Q&A forum for the N4.
sent from my paranoid N4
Nekator said:
1. U don't have to flash another ROM if you are on stock ROM or another AOSP ROM
2. Feel free to flash any ROM u want all AOSP based Ron's should work with this kernel.
3. If u flash another ROM u have to flash the kernel again because the stock kernel of the ROM will be flashed as well.
BTW. Post this kind of questions into the Q&A forum for the N4.
sent from my paranoid N4
Click to expand...
Click to collapse
So I'm on Stock ROM right now. I don't need to redo the installation process and just flash it at will? Didn't know you can flash multiple roms too...
what roms do you guys recommend with the most with matr1x kernel?
derking1 said:
So I'm on Stock ROM right now. I don't need to redo the installation process and just flash it at will? Didn't know you can flash multiple roms too...
what roms do you guys recommend with the most with matr1x kernel?
Click to expand...
Click to collapse
No help anyone? Slight bump...just want your suggestions!
derking1 said:
No help anyone? Slight bump...just want your suggestions!
Click to expand...
Click to collapse
matrix is not a rom, it is a kernel. all roms include kernels, or your phone would never work. all you do is flash matrix over what you have now, and itll replace your current kernel with matrix. that is all, do not over think it, do not make it more complicated then it actually is. and no, no one can tell you what rom to run, it is only your personal choice and no one elses. there are roms in the development section, read their threads, then you decide.
simms22 said:
matrix is not a rom, it is a kernel. all roms include kernels, or your phone would never work. all you do is flash matrix over what you have now, and itll replace your current kernel with matrix. that is all, do not over think it, do not make it more complicated then it actually is. and no, no one can tell you what rom to run, it is only your personal choice and no one elses. there are roms in the development section, read their threads, then you decide.
Click to expand...
Click to collapse
I know matrix is a kernel, I'm saying which one would be the most appropriate to go with it. One more question: Whenever there's an android update and I have flashed a Rom and Kernel, do I have to redo the flashing process again? ex. Android 4.4.4
Mahdi Rom + Hellsdoctor Kernel
Inviato dal mio Nexus 4
AlessioPalazzolo said:
Mahdi Rom + Hellsdoctor Kernel
Inviato dal mio Nexus 4
Click to expand...
Click to collapse
Yo that sounds nice...any other rom+kernel combinations? I might try mahdi with matr1x myself.

[Q] no network, ios8 rom

hello, I completely follow the steps in the video and I have a problem. It don't have a network, I have a question, could it be the kernel or the rom...
this is the video by sir khizar ali, https://www.youtube.com/watch?v=j0MQMhEACbA
How can i fixed the problem?
Should I try another kernel???
AYA88 said:
hello, I completely follow the steps in the video and I have a problem. It don't have a network, I have a question, could it be the kernel or the rom...
this is the video by sir khizar ali, https://www.youtube.com/watch?v=j0MQMhEACbA
How can i fixed the problem?
Should I try another kernel???
Click to expand...
Click to collapse
This rom is based on cm7 - you must use a cm7 kernel that supports the Base rom
If you have no signal you may want to update your stock rom baseband by flashing the latest modem file for your region - see my firmware thread at top of Dev section or link in signature
marcussmith2626 said:
This rom is based on cm7 - you must use a cm7 kernel that supports the Base rom
If you have no signal you may want to update your stock rom baseband by flashing the latest modem file for your region - see my firmware thread at top of Dev section or link in signature
Click to expand...
Click to collapse
sir, what kernel should I use to this rom?
the kernel link in the video was blocked due to "copyright"..
I dont know what is the kernel used..
Do you know what kernel was used?
If no, then what alternative kernel shall I use to flash the rom?
Thanks sir,
AYA88 said:
sir, what kernel should I use to this rom?
the kernel link in the video was blocked due to "copyright"..
I dont know what is the kernel used..
Do you know what kernel was used?
If no, then what alternative kernel shall I use to flash the rom?
Thanks sir,
Click to expand...
Click to collapse
Either
http://forum.xda-developers.com/showthread.php?t=2673603
Or
Percy #2 cm kernel (Google it)
probably says in video but can't be bothered to watch it
marcussmith2626 said:
Either
http://forum.xda-developers.com/showthread.php?t=2673603
Or
Percy #2 cm kernel (Google it)
probably says in video but can't be bothered to watch it
Click to expand...
Click to collapse
thank you sir for the time and effort,

Dorimanx LOLLIPOP kernel {STOCK} Q&A thread

Please use this thread for your questions answers and support
KERNEL THREAD HERE
dorimanx LP Kernels storage here
Does it work on 5.1 or 5.1.1 ROMs?
gamerZ1 said:
Does it work on 5.1 or 5.1.1 ROMs?
Click to expand...
Click to collapse
NO, LG Stock ROM is based on 5.0.2 and this kernel works only on this base.
SREEPRAJAY said:
Please use this thread for your questions answers and support
Click to expand...
Click to collapse
Dorimanx is only for stock
4Freedom said:
Dorimanx is only for stock
Click to expand...
Click to collapse
Is there any difference of opinion or accepting?
The THREAD TITLE says so too.
I think you also need to take care of your signature (image) size my friend
gamerZ1 said:
Does it work on 5.1 or 5.1.1 ROMs?
Click to expand...
Click to collapse
You don't even read one post above yours...
gamerZ1 said:
Does it work on 5.1 or 5.1.1 ROMs?
Click to expand...
Click to collapse
Read man!
Sent from my LG-D802
Can I flash this while using jb bootloader?
defynoob said:
Can I flash this while using jb bootloader?
Click to expand...
Click to collapse
no. will not boot.
what is the best config for best battery
,
seeker07 said:
what is the best config for best battery
,
Click to expand...
Click to collapse
Hi,
Dorimanx has defined profiles for different usage. I would guess that extreme battery profile is the one you are looking for. ( is to be set in the profile tab in stweaks app)
@dorimanx , sorry for ask this, but, wich stock rom did you flash? D? Or B? I can't remember
30B he did..
me too
Kernel compile
Hi,
As I'm curious, I'm trying to compile dorimanx kernel jus to see how all this is working.
So I've pulled three repo (crosstool-ng-by-dorimanx, DORIMANX_LG_STOCK_LP_KERNEL, lp_ramdisk_dorimanx )
when I run ./default_build.sh I have this error:
android-toolchain/bin/arm-eabi-ar: error while loading shared libraries: libfl.so.2: cannot open shared object file: No such file or directory
both libfl-dev i386 and x86_64 are installed on my 14.04 Ubuntu system.
If any of you know what is the problem, please let me know ?
Flashed dori1.2 on 30b Somboons Rom. Dorimanx states "sorry, no kernel support".
Already rebooted, reset to defaults,...
Wimmme said:
Flashed dori1.2 on 30b Somboons Rom. Dorimanx states "sorry, no kernel support".
Already rebooted, reset to defaults,...
Click to expand...
Click to collapse
Had the Same issue, Check if stweaks Has root acess
Spoiler
LG G2 D802
Dorimanx LP Kernel
Stock LP
ViPER4AndroidFX+Poweramp
? ATH-M50x ?
Thank you for excellent kernel. I was so angry because of stock.
What exactly is 'UltraSound high performance audio hardware'? Another tweaks to audio drivers? I must say that sound quality on kitkat dorimanx seems to be better than other kernels.
Lycidias said:
Had the Same issue, Check if stweaks Has root acess
Spoiler
LG G2 D802
Dorimanx LP Kernel
Stock LP
ViPER4AndroidFX+Poweramp
? ATH-M50x ?
Click to expand...
Click to collapse
I don't even have stweaks. Just reflashed 1.2 but still no stweaks. I see synapse is installed. I'll try to remove synapse and reflash
Update: dorimanx app == stweaks.
I am already that long on Aosp i didn't even knew.
It has root access, still no go
maybe delete /data/.dori Folder and reflash kernel..
BaschtlWaschtl said:
maybe delete /data/.dori Folder and reflash kernel..
Click to expand...
Click to collapse
It's working now, tnx

Categories

Resources