Device status and OTA help - Galaxy S 4 Q&A, Help & Troubleshooting

Hey everyone,
I flashed the leaked 4.3 firmware with the 4.3 kernel and everything worked well except it drained battery way too quickly. I just flashed back to stock XXMEA firmware and did a factory reset. Everything is working perfect except under Device Status it says 'Custom' and when I plug the phone into Kies it won't check for updates. It says something about the device unable to initialize or something .
Does anyone know how I can get the firmware back to 'official' status and receive OTA updates?
The CSC is back to normal (XSA), the Kernel is back to nornal and obviously the firmware is back to normal. Any help appreciated immensely!
Sent from my GT-I9505 using xda premium

Simmo3D said:
Hey everyone,
I flashed the leaked 4.3 firmware with the 4.3 kernel and everything worked well except it drained battery way too quickly. I just flashed back to stock XXMEA firmware and did a factory reset. Everything is working perfect except under Device Status it says 'Custom' and when I plug the phone into Kies it won't check for updates. It says something about the device unable to initialize or something .
Does anyone know how I can get the firmware back to 'official' status and receive OTA updates?
The CSC is back to normal (XSA), the Kernel is back to nornal and obviously the firmware is back to normal. Any help appreciated immensely!
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
There are couple of people i have seen including mine saying custom after flashing the Stock however try to reset once again and see, if not again flash a firmware and reset u will get Official
U may also use Triangle away to reset the binary Counter & Custom status it works for I9505

123hiten said:
There are couple of people i have seen including mine saying custom after flashing the Stock however try to reset once again and see, if not again flash a firmware and reset u will get Official
U may also use Triangle away to reset the binary Counter & Custom status it works for I9505
Click to expand...
Click to collapse
Thank you. I flashed the stock firmware again and another reset and its back to official.
Thank you so much
Sent from my GT-I9505 using xda premium

Simmo3D said:
Thank you. I flashed the stock firmware again and another reset and its back to official.
Thank you so much
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
Ooh thats great

Related

Flashed the latest update /how to remove?

Hi guys, I recently flashed the latest update on my i9500 (the one that enables you to move apps to sd) I downloaded the update and flashed it using Odin. But I can no longer do an OTA update, whenever I check it says something like "Device is modified unable to update". It also says under device status as "Custom". BTw, I completely wiped my device but the flashed update still remains. I rooted BTw and using persues kernel if it matters.
Sent from my GT-I9500 using Tapatalk 4 Beta
Marck527 said:
Hi guys, I recently flashed the latest update on my i9500 (the one that enables you to move apps to sd) I downloaded the update and flashed it using Odin. But I can no longer do an OTA update, whenever I check it says something like "Device is modified unable to update". It also says under device status as "Custom". BTw, I completely wiped my device but the flashed update still remains. I rooted BTw and using persues kernel if it matters.
Sent from my GT-I9500 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Go to sammobile.com and find the firmware of your region and flash it.
Sent from my GT-I9500
Did you used to be rooted before you flashed the update with Odin?
In that case you'll probably have to re-root your device, run Triangle Away by chainfire to reset the counter and then flash the latest official firmware from sammobile. That ought to get you back to official status.
abuarman said:
Go to sammobile.com and find the firmware of your region and flash it.
Sent from my GT-I9500
Click to expand...
Click to collapse
Thanks, but I just checked and the firmware for my region is not available on sammobile yet.
Obscure Reference said:
Did you used to be rooted before you flashed the update with Odin?
In that case you'll probably have to re-root your device, run Triangle Away by chainfire to reset the counter and then flash the latest official firmware from sammobile. That ought to get you back to official status.
Click to expand...
Click to collapse
No, I rooted straight away after I flashed the update. So I can just run triangle away and flash the firmware for my region?
Sent from my GT-I9500 using Tapatalk 4 Beta
Marck527 said:
Thanks, but I just checked and the firmware for my region is not available on sammobile yet.
No, I rooted straight away after I flashed the update. So I can just run triangle away and flash the firmware for my region?
Sent from my GT-I9500 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Worth a shot. It'd be interesting to see if it's even increased the counter. But.. if the right firmware isn't available on sammobile yet.. what'd you flash? And where did you get it?
Hi,
There is no Triangle Away for the i9500.
Once you root it ,there is no way to get it back to "Official"
Hence, you cannot get OTA
To get the firmware you want,look HERE
malybru said:
Hi,
There is no Triangle Away for the i9500.
Once you root it ,there is no way to get it back to "Official"
Hence, you cannot get OTA
To get the firmware you want,look HERE
Click to expand...
Click to collapse
Yeah just bought it and quickly refunded as soon as I found d out its incompatible so does this mean I have to flash all the future update? Or wait for triangle away to be compatible I guess.
Sent from my GT-I9500 using Tapatalk 4 Beta
Marck527 said:
Yeah just bought it and quickly refunded as soon as I found d out its incompatible so does this mean I have to flash all the future update? Or wait for triangle away to be compatible I guess.
Sent from my GT-I9500 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Hi,
Yes.
Yes.
Marck527 said:
Yeah just bought it and quickly refunded as soon as I found d out its incompatible so does this mean I have to flash all the future update? Or wait for triangle away to be compatible I guess.
Sent from my GT-I9500 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Djembey has an official status mod that u can use to stay rooted but have official status. I have done this on the latest rom for I9500, and it works. My device and binary status are still official, OTA works, and I am rooted.. You may need to flash the mod a couple of times and factory reset/wipe cache, but this works 100%.
http://forum.xda-developers.com/showthread.php?t=2255190
msquare said:
Djembey has an official status mod that u can use to stay rooted but have official status. I have done this on the latest rom for I9500, and it works. My device and binary status are still official, OTA works, and I am rooted.. You may need to flash the mod a couple of times and factory reset/wipe cache, but this works 100%.
http://forum.xda-developers.com/showthread.php?t=2255190
Click to expand...
Click to collapse
Hey thanks for the link, but wouldn't I still need to run triangle away? Which isn't compatible?
Sent from my GT-I9500 using Tapatalk 4 Beta
Marck527 said:
Hey thanks for the link, but wouldn't I still need to run triangle away? Which isn't compatible?
Sent from my GT-I9500 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yes, thats true. My understanding is that using triangle away may become relevant when you want to return your phone to Samsung for warranty, but until then this method works perfectly for making the phone run almost like a stock unrooted phone.

I9505 mga btu software update

Hi I have a unlocked unbranded i9505 that came with mga software. I have rooted it and I did Triangle away it. I updated it via kies the other day and it seemed to work fine. But I've recently just tryed to see if there was any more updates by ota and it says something about my device is modified so doesn't support ota. So I looked again what my current software version and it's somehow gone bk to mga not the updated software. Can some one tell me what has gone wrong please
Sent from my GT-I9505
vimto25 said:
Hi I have a unlocked unbranded i9505 that came with mga software. I have rooted it and I did Triangle away it. I updated it via kies the other day and it seemed to work fine. But I've recently just tryed to see if there was any more updates by ota and it says something about my device is modified so doesn't support ota. So I looked again what my current software version and it's somehow gone bk to mga not the updated software. Can some one tell me what has gone wrong please
Sent from my GT-I9505
Click to expand...
Click to collapse
If u wanna have OTA u must be running stock without anything custom like root also that is what would have made ur device modified
However to get OTA u can flash ur stock firmware and reset the device which will make ur phone official and try u should be able to get OTA
.
I did use triangle away and then decided to update the phone by kies new stock update which I no will take phone to stock which I wanted but after the update I did check the phone and it did give me new software. Although everything was the same on my phone such as messages ect.. As it was before I updated. It is just that I looked at my current software again the other say and it's now saying my old version not the new 1 I updated to via kies so I'm confused what's happening
123hiten said:
If u wanna have OTA u must be running stock without anything custom like root also that is what would have made ur device modified
However to get OTA u can flash ur stock firmware and reset the device which will make ur phone official and try u should be able to get OTA
.
Click to expand...
Click to collapse
Sent from my GT-I9505
vimto25 said:
I did use triangle away and then decided to update the phone by kies new stock update which I no will take phone to stock which I wanted but after the update I did check the phone and it did give me new software. Although everything was the same on my phone such as messages ect.. As it was before I updated. It is just that I looked at my current software again the other say and it's now saying my old version not the new 1 I updated to via kies so I'm confused what's happening
Sent from my GT-I9505
Click to expand...
Click to collapse
Any new update u do using Kies , OTA , using Odin also almost all the stock firmware version look the same except some minor changes / bug fixed and any update method u use from the above for stock firmware it will never delete ur data all remains same just updated to latest
Just post ur Firmware Build details will know what u using
Here is my device
Sent from my GT-I9505
vimto25 said:
Here is my device
Sent from my GT-I9505
Click to expand...
Click to collapse
That is the latest BTU stock rom on your phone . I looked back at your previous posts, it looks like you stated that your phone came with MDM in at least 2 other posts, so I think the update worked just fine!

[Q] Your device has been modified..

Hey People,
i previously rooted my phone on stock firmware along with changing the kernel. I have no restored and removed root back to stock but i get this message when doing a OTA update as i need the latest update to enable 4G on my phone. It says Your device has been modified. Software updates are not available. How do i go about fixing this? I have done some research and used the triangle app to reset the flash counter which now says Official rather then Custom In download mode? If i flash the firmware does it automatically Re flash my Kernel or is that separate? I have looked for the stock i9505 kernel i Just cant seem to find it.
Will appreciate the help
Thanks
jeezy85 said:
Hey People,
i previously rooted my phone on stock firmware along with changing the kernel. I have no restored and removed root back to stock but i get this message when doing a OTA update as i need the latest update to enable 4G on my phone. It says Your device has been modified. Software updates are not available. How do i go about fixing this? I have done some research and used the triangle app to reset the flash counter which now says Official rather then Custom In download mode? If i flash the firmware does it automatically Re flash my Kernel or is that separate? I have looked for the stock i9505 kernel i Just cant seem to find it.
Will appreciate the help
Thanks
Click to expand...
Click to collapse
flash stock firmware, stock kernel included
It's normal that it says that. Just install Xposed framework, then Wanam Xposed, there is an option to fake the system status as official and thus you'll be able to update firmware OTA.
Sent from my GT-I9500 using Tapatalk 4
samersh72 said:
flash stock firmware, stock kernel included
Click to expand...
Click to collapse
i have flashed stock firmware 2/3 times now doing another 1 as we speak it still says i cannot update ota..
any other ideas what could be causing it to be modified?
Have you ever find a way to fix this?
jeezy85 said:
i have flashed stock firmware 2/3 times now doing another 1 as we speak it still says i cannot update ota..
any other ideas what could be causing it to be modified?
Click to expand...
Click to collapse
then try to update using kies
svd1977 said:
then try to update using kies
Click to expand...
Click to collapse
Thank you for your answer, but unfortunately I can't use Kies since I use Linux and there is no Kies for Linux. May be another solution like adb?
Have u tried factory reset in stock recovery. I had this when I flashed official fw with odin. Was not untill I reset that the prob went away
Sent from my GT-I9505 using xda app-developers app
l8erz said:
Have u tried factory reset in stock recovery. I had this when I flashed official fw with odin. Was not untill I reset that the prob went away
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Thank you!
I wiped the data, without success, then I flashed everything again with Heindall 1.4.0, then wiped everything again. Now I have official status and should receive OTA updates.
Edit: but after rooting the official status is lost. Now I think this may be normal.

[Q] Reverting back to stock

Hello everyone,
I have Galaxy S4 GT-I9505 and using CyanogenMod's installer version a few months now.
CyanogenMod's installer has A LOT of problems and I had enough of it and want to go back to stock.
Before I moved to CM I had 4.3 and also Knox bootloader so it went to 0x1 after CM's installation.
I want to ask can I go to stock 4.3 even that my Knox is 0x1?
Do I need to use TriangleAway? If so, how?
I understood that TriangleAway requires Samsung's official kernel but I have the kernel of CM now.
Anyway, what do I need to do?
Thanks in advance
Meyhemg said:
Hello everyone,
I have Galaxy S4 GT-I9505 and using CyanogenMod's installer version a few months now.
CyanogenMod's installer has A LOT of problems and I had enough of it and want to go back to stock.
Before I moved to CM I had 4.3 and also Knox bootloader so it went to 0x1 after CM's installation.
I want to ask can I go to stock 4.3 even that my Knox is 0x1?
Do I need to use TriangleAway? If so, how?
I understood that TriangleAway requires Samsung's official kernel but I have the kernel of CM now.
Anyway, what do I need to do?
Thanks in advance
Click to expand...
Click to collapse
Find your stock rom specifically the one that is your region. If your phone is for example like mine, i9500 XSE which is the first three letters of Indonesia then get that specific stock file.
It's probably around 1.4 gigs. It downloads very slow. After that open Odin flash the stock rom, and your good to go. I've bricked numerous times and all I've done was revert back like this. No problems.
I don't know if you can put the stock rom in your custom recovery and flash it there, I haven't tried it yet just run Odin in administrator mode, insert the stock rom, go into download mode on your phone by pressing - vol and power, then click start.
Wait.
Stock.
Done,
Sent from my iPad using Tapatalk
Drasztic said:
Find your stock rom specifically the one that is your region. If your phone is for example like mine, i9500 XSE which is the first three letters of Indonesia then get that specific stock file.
It's probably around 1.4 gigs. It downloads very slow. After that open Odin flash the stock rom, and your good to go. I've bricked numerous times and all I've done was revert back like this. No problems.
I don't know if you can put the stock rom in your custom recovery and flash it there, I haven't tried it yet just run Odin in administrator mode, insert the stock rom, go into download mode on your phone by pressing - vol and power, then click start.
Wait.
Stock.
Done,
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Thanks, but don't I need to use TriangleAway to reset binary counter so that I'll be able to receive future updates from Samsung?
Meyhemg said:
Thanks, but don't I need to use TriangleAway to reset binary counter so that I'll be able to receive future updates from Samsung?
Click to expand...
Click to collapse
I may be wrong on this one but, if you use the auto CF root method I don't think there's a way to use the triangle method.
Therefore you're stuck on Knox. I could be wrong but I'm leaning on 70% being right..
Sent from my iPad using Tapatalk
Meyhemg said:
Thanks, but don't I need to use TriangleAway to reset binary counter so that I'll be able to receive future updates from Samsung?
Click to expand...
Click to collapse
I guess the binary counter is hidden somewhere. And for updates you can get OTA kies updates if you are havin stock recovery. One last thing Triangle away doesnt supports I9500.
All the best.
Mandark52 said:
I guess the binary counter is hidden somewhere. And for updates you can get OTA kies updates if you are havin stock recovery. One last thing Triangle away doesnt supports I9500.
All the best.
Click to expand...
Click to collapse
Thanks.
I installed stock BTU and now my device status shows "Official" and also in download mode, without using TriangleAway.
Also, Kies works with my device again and recognizes it.
Meyhemg said:
Thanks.
I installed stock BTU and now my device status shows "Official" and also in download mode, without using TriangleAway.
Also, Kies works with my device again and recognizes it.
Click to expand...
Click to collapse
Yes it says official but your knox counter might be already 0x01. If so, you won't be able to update your device via Kies anymore. You can always download the updates anyway.
cheers ~
deandoi said:
Yes it says official but your knox counter might be already 0x01. If so, you won't be able to update your device via Kies anymore. You can always download the updates anyway.
cheers ~
Click to expand...
Click to collapse
But when I connect my phone to Kies it does recognize my phone and says I have the latest firmware and it doesn't shoe any sign that I won't be able to update through it.
I think you're mistaken with the binary counter. If the binary counter wasn't 0 and showed custom in download mode and settings only then I couldn't update via Kies.
deandoi said:
Yes it says official but your knox counter might be already 0x01. If so, you won't be able to update your device via Kies anymore. You can always download the updates anyway.
cheers ~
Click to expand...
Click to collapse
If you have a custom recovery then you wont be able to update via Kies or OTA.
Sent from my OCTA CORE I9500
Meyhemg said:
But when I connect my phone to Kies it does recognize my phone and says I have the latest firmware and it doesn't shoe any sign that I won't be able to update through it.
I think you're mistaken with the binary counter. If the binary counter wasn't 0 and showed custom in download mode and settings only then I couldn't update via Kies.
Click to expand...
Click to collapse
Oh yeah. My mistake.
Sent from my GT-I9500 using XDA Premium 4 mobile app
deandoi said:
Oh yeah. My mistake.
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
PHEW. I thought it's the end of updates for my device.
What I did understand is that I won't be able to use Knox app on the phone. right?
Meyhemg said:
PHEW. I thought it's the end of updates for my device.
What I did understand is that I won't be able to use Knox app on the phone. right?
Click to expand...
Click to collapse
Yep. You won't be able to use them. I disable them anyway.
Sent from my GT-I9500 using XDA Premium 4 mobile app

[Q] OTA 4.4 back to 4.3

Can someone help me take my S4 back to 4.3? I got the OTA update for 4.4 yesterday morning and have had nothing but problems. Terrible battery life (40% down in 3 hours with little to no use) WiFi wont turn on thanks to this piece of junk Knox software. So before I dump Samsung completely for a Moto X or Nexus, can someone help me downgrade from 4.4 back to 4.3 where I had no problems?
Were you totally stock before the OTA? If you still have warranty left, I would bring it in to a Sprint store and *****.
If not, you can try one of 2 things. 1) flash the NAE tar file using odin to see if that fixes your issues or 2) flash the MK2 tar file to bring you back to 4.3
aypanthony said:
Were you totally stock before the OTA? If you still have warranty left, I would bring it in to a Sprint store and *****.
If not, you can try one of 2 things. 1) flash the NAE tar file using odin to see if that fixes your issues or 2) flash the MK2 tar file to bring you back to 4.3
Click to expand...
Click to collapse
I went Cyanogen at one point, didn't like it, and flashed back to stock. When the OTA hit I was rooted but had made no changes from stock, not even an uninstall of a Samsung app. I am backing things up now to flash the NAE again, but I want a version without this Knox garbage in it. Is there such thing?
I read that you can't flash back with Odin from 4.4 to 4.3 so I don't know how to do option 2 at this point.
sponge14 said:
I went Cyanogen at one point, didn't like it, and flashed back to stock. When the OTA hit I was rooted but had made no changes from stock, not even an uninstall of a Samsung app. I am backing things up now to flash the NAE again, but I want a version without this Knox garbage in it. Is there such thing?
I read that you can't flash back with Odin from 4.4 to 4.3 so I don't know how to do option 2 at this point.
Click to expand...
Click to collapse
You're correct with not being able to go back to mk2 4.3 via Odin.
Sent from my SPH-L720 using Tapatalk
sponge14 said:
I went Cyanogen at one point, didn't like it, and flashed back to stock. When the OTA hit I was rooted but had made no changes from stock, not even an uninstall of a Samsung app. I am backing things up now to flash the NAE again, but I want a version without this Knox garbage in it. Is there such thing?
I read that you can't flash back with Odin from 4.4 to 4.3 so I don't know how to do option 2 at this point.
Click to expand...
Click to collapse
Yeah, I think you are right. Can't go back to 4.3 once you have the 4.4 bootloader, my bad. I wonder if you should do a factory reset to see if that clears up your issues.
daniel4653 said:
You're correct with not being able to go back to mk2 4.3 via Odin.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Is there some other way of downgrading? What about going back to Cyanogen's full release?
Well that sucks that you can't go back to 4.3
I had the same issues when I updated and was kinda pissed at it to but a factory reset and it been running way better ever since and I'm rooted with xposed installed and no complaints
Sent from my SPH-L720 using xda app-developers app
sponge14 said:
I went Cyanogen at one point, didn't like it, and flashed back to stock. When the OTA hit I was rooted but had made no changes from stock, not even an uninstall of a Samsung app. I am backing things up now to flash the NAE again, but I want a version without this Knox garbage in it. Is there such thing?
I read that you can't flash back with Odin from 4.4 to 4.3 so I don't know how to do option 2 at this point.
Click to expand...
Click to collapse
I believe once KNOX Bootloader has been installed, your stuck with it. No going back.
But honestly, if you root 4.4, your gonna void KNOX.
lawmangrant said:
I believe once KNOX Bootloader has been installed, your stuck with it. No going back.
But honestly, if you root 4.4, your gonna void KNOX.
Click to expand...
Click to collapse
I don't want Knox on my phone at all, it's garbage for me. Are you saying I can't even go Cyanogen at this point?
sponge14 said:
I don't want Knox on my phone at all, it's garbage for me. Are you saying I can't even go Cyanogen at this point?
Click to expand...
Click to collapse
You can still have all that. KNOX is just the warrantly flag I have KNOX on mine, but I still have rooted and flashed other roms.
lawmangrant said:
You can still have all that. KNOX is just the warrantly flag I have KNOX on mine, but I still have rooted and flashed other roms.
Click to expand...
Click to collapse
Ah OK, I don't care about the warranty, it's out in April anyways... Looks like I need to try Cyanogen again, hopefully it's better this time.
i have gone back to 4.3 with odin.....use odin 1.85.....*First flash the mk2 modem or it will fail**.....why? i dont know...
so here is what i do....1) Odin first the mk2 modem...2) Odin stock Mk2 rom...3) Odin philz latest recovery...4) boot into recovery..goto philz settings and tap " re-root....5) reboot and enjoy.....
Sent from my SPH-L720 using xda app-developers app
chris-allen said:
i have gone back to 4.3 with odin.....use odin 1.85.....*First flash the mk2 modem or it will fail**.....why? i dont know...
so here is what i do....1) Odin first the mk2 modem...2) Odin stock Mk2 rom...3) Odin philz latest recovery...4) boot into recovery..goto philz settings and tap " re-root....5) reboot and enjoy.....
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
You're saying your bootloader went back to MK2 after this? Didn't think that was possible. I've had nothing but stupid little issues myself after using Odin to flash the phone to NAE. I've done factory resets... Completely wiped the phone in Philz. Tried KToonsez kernel as well and stock NAE just sux! I'll probably just flash Liquid Smooth back on it, was only trying to stick with stock NAE for stability and camera , that phone is my girls and she doesn't have the patience for all the bugs that come with custom Roms lol
Anyways just want to confirm that with you. Thanks
Sent from my SCH-I545 using Tapatalk
chris-allen said:
i have gone back to 4.3 with odin.....use odin 1.85.....*First flash the mk2 modem or it will fail**.....why? i dont know...
so here is what i do....1) Odin first the mk2 modem...2) Odin stock Mk2 rom...3) Odin philz latest recovery...4) boot into recovery..goto philz settings and tap " re-root....5) reboot and enjoy.....
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I don't know if that is possible for those of us rocking triband. Obviously we cannot use the Mk2 modem or rom. In any event, I upgraded to 4.4.2 on my new L720T and regretted it, but now I'v" managed to install twrp and rooted it and the rom settled down after a few days. At first, horrible battery use but now its amazing. My battery reads 75 percent after 14 hours and that's quite good enough. The only issue I still face is the SD card thing, but that only seems to apply third party software as I can move files directly from internal to external memory using the stock files app that comes with android.
i dont know about triband. i dont have one and im not going to pretend im a smart dev because thats also not true.. i HAVE ODIN 4.4.2 THEN turned around and ODIN 4.3 due to something i didnt like...im not sure if it changes the bootloader or not, i dont even check. i have only tried this with mk2 to nae.. when i purchesed my device it came with mk2 so i have never tinkerd with the other bootloaders. if you have something other then mk2 id ask a dev befor doing anything. like i said it works for me as long as i flash the modem FIRST that corrisponds to the build. ( mk2 or nae )...and in some cases if the wifi is borked on nae, iv had to flash the modem again after instalation of the rom.. i cant explain why any of this happens....
Sent from my SPH-L720 using xda app-developers app
chris-allen said:
i dont know about triband. i dont have one and im not going to pretend im a smart dev because thats also not true.. i HAVE ODIN 4.4.2 THEN turned around and ODIN 4.3 due to something i didnt like...im not sure if it changes the bootloader or not, i dont even check. i have only tried this with mk2 to nae.. when i purchesed my device it came with mk2 so i have never tinkerd with the other bootloaders. if you have something other then mk2 id ask a dev befor doing anything. like i said it works for me as long as i flash the modem FIRST that corrisponds to the build. ( mk2 or nae )...and in some cases if the wifi is borked on nae, iv had to flash the modem again after instalation of the rom.. i cant explain why any of this happens....
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Lol I know what you mean... Sometimes things just seem to work or they don't.
But that's interesting you can go back to mk2 after being on nae. I figured that was not possible. But if you didn't get any fails in Odin while downgrading that's great. Maybe I'll get ballsy and try this later.
Sent from my SCH-I545 using Tapatalk
Is there a stock 4.4 Rom out there I can try, preferably one without Knox? Sprint has recommended that I unroot, that they have a tech bulletin where rooted phones have wifi, and other issues.
sponge14 said:
Is there a stock 4.4 Rom out there I can try, preferably one without Knox? Sprint has recommended that I unroot, that they have a tech bulletin where rooted phones have wifi, and other issues.
Click to expand...
Click to collapse
You have a link to that bulletin??
Sent from my SCH-I545 using Tapatalk
Mistertac said:
You have a link to that bulletin??
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
No that's just what the escalated Tech Support person from Oklahoma City told me.
I also just wiped the cache and did a factory reset and still have the same wifi problem...

Categories

Resources