Database Users

unable to boot in Defy custom recovery

Hi
I rooted my defy 2.2 using Superoneclick 2.1.1
than installed ROM manager for Nandroid backup.....
It is not booting in clockworkmod recovery..
the procedure i am following to get in recovery is :
1) Switch off
2) press and hold vol. down key
3) press power button
4) android symbol with a triangle appears and it's stuck there
5) now when I press both vol. down and up key, stock recovery appears
there is some messege there :
E:Can't open /cache/recovery/command
E:Can't open /cache/recovery/coller
how to boot in recovery

warewolf4586 said:
Hi
the procedure i am following to get in recovery is :
1) Switch off
2) press and hold vol. down key
3) press power button
4) android symbol with a triangle appears and it's stuck there
5) now when I press both vol. down and up key, stock recovery appears
how to boot in recovery
Click to expand...
Click to collapse
The method as you tryed is stock recovery, if you try to enter CWM recovery
after rooted, you must install Defy system recovery
- put system recovery.apk into SD card
- enable(Turn on) Unknown sources and USB debugging in Application settings
- install system recovery.apk from SD card (Use File manager or Root Explorer)
- Open System recovery App and Select Install Recovery system, it will show "Install success"
- Before reboot (Recovery reboot), you must Turn off "USB debugging"
Otherwise, defy will stuck in black screen
OK, If you want to reboot to CWM recovery mode, you can open System recovery App and Select Recovery boot
or Try that
http://forum.xda-developers.com/showthread.php?t=1032212

THBlurism said:
The method as you tryed is stock recovery, if you try to enter CWM recovery
after rooted, you must install Defy system recovery
- put system recovery.apk into SD card
- enable(Turn on) Unknown sources and USB debugging in Application settings
- install system recovery.apk from SD card (Use File manager or Root Explorer)
- Open System recovery App and Select Install Recovery system, it will show "Install success"
- Before reboot (Recovery reboot), you must Turn off "USB debugging"
Otherwise, defy will stuck in black screen
OK, If you want to reboot to CWM recovery mode, you can open System recovery App and Select Recovery boot
or Try that
http://forum.xda-developers.com/showthread.php?t=1032212
Click to expand...
Click to collapse
Worked perfectly.. Thanks!

Sir can you share the system recovery file download link...

So is there a way to boot into custom recovery with phone being off? What if a flash goes wrong and stuck with boot loop. How do you get into custom recovery to to restore backup?

mike102871 said:
So is there a way to boot into custom recovery with phone being off? What if a flash goes wrong and stuck with boot loop. How do you get into custom recovery to to restore backup?
Click to expand...
Click to collapse
What I always do when I flash something and it goes wrong is enter bootloader mode and flash a new sbf. I'm fairily sure to do that you hold power and volume up while booting.
Sent from my MB525 using XDA App

very usefull and easy to use
it was very easy, following the instructrions, just make sure to get the latest version of the software...

Zombiepiratez said:
What I always do when I flash something and it goes wrong is enter bootloader mode and flash a new sbf. I'm fairily sure to do that you hold power and volume up while booting.
Click to expand...
Click to collapse
I mistakenly rebooted after wiping cache,dalvik cache and sytem. Now I'm stuck at the moto logo. Is there any way to enter into custom recovery other than the flashing method you specified above?? I was using SlimBean(Slim-4.3.build.2-UNOFFICIAL-2013027-1124) with TWRP v2.6.3.0.

chandujram said:
I mistakenly rebooted after wiping cache,dalvik cache and sytem. Now I'm stuck at the moto logo. Is there any way to enter into custom recovery other than the flashing method you specified above?? I was using SlimBean(Slim-4.3.build.2-UNOFFICIAL-2013027-1124) with TWRP v2.6.3.0.
Click to expand...
Click to collapse
Same happened to me.
How can i get into CWM/TWRP to install a new rom?

Daimonion1980 said:
Same happened to me.
How can i get into CWM/TWRP to install a new rom?
Click to expand...
Click to collapse
Only way is to flash SBF.
Sent from my Nexus 7 using Tapatalk

hotdog125 said:
Only way is to flash SBF.
Click to expand...
Click to collapse
Yeah.. only that worked.. and I'm now on SlimKat!

Deleted system

Hey
Today I was on Team Win Recovery Project v2.21 and I wanted to flash a new mod in however half way, I accidentally click on reboot now.
I already - Factory reset my device
- Wiped Dalvik Cache Directories
then tried to flash in one of my rom i was flashing in but I got an error then clear dalvik cache directories again. After I tried to reflash my rom but it failed again.After this I accidentally reboot my device and now it is stuck on a screen with "Reboot.." as the title. I can not restart the my nexus 7, touch any keys given (home and back). When I press/hold power, it comes up with a look.
I am wondering if there any way to fix this problem

Maybe try this...
http://forum.xda-developers.com/showthread.php?t=1781250
Or use this program...
http://forum.xda-developers.com/showthread.php?t=1766475

Lockable said:
Hey
Today I was on Team Win Recovery Project v2.21 and I wanted to flash a new mod in however half way, I accidentally click on reboot now.
I already - Factory reset my device
- Wiped Dalvik Cache Directories
then tried to flash in one of my rom i was flashing in but I got an error then clear dalvik cache directories again. After I tried to reflash my rom but it failed again.After this I accidentally reboot my device and now it is stuck on a screen with "Reboot.." as the title. I can not restart the my nexus 7, touch any keys given (home and back). When I press/hold power, it comes up with a look.
I am wondering if there any way to fix this problem
Click to expand...
Click to collapse
Reboot into bootloader (hold power to turn off, as soon as it does hold vol down)
Install the android sdk if you haven't. Download a recovery image from clockworkmod.com, put the image in your /platform-tools folder. Open a command Window there
Fastboot flash recovery xxxx.img
Fastboot boot xxxx.img
Dl a rom
Put it in your platofrm-tools folder
Adb push romxxx.zip /sdcard/Download
Flash the ROM in recovery
Reboot
Sent from my Google Nexus 7 using Tapatalk 2

When I turn on my tablet now, it automatically open up ClockworkMod Recovery. I am able to properly install a rom (wipe all data then install rom from sd) but when i reboot my device it goes back into clockwordmod recovery. Any idea how to bypass automatically booting straight into recovery mood and booting into flashboot?
EDIT
i am unable to push new roms in

mis-post, my bad.

[Q] Help booting into Recovery

Hi guys, I've unlocked my bootloader and flashed CWM from:http://www.clockworkmod.com/rommanager, I've flashed and didn't get any errors, boot to Android and did "adb reboot recovery", I get in a screen with the android with a red triangle, stayed for some mins and nothing, I turned off and boot to Android, turned off again and turn on by Power + Vol -, Select Recovery and samething...
obs: I used this tutorial: http://forum.xda-developers.com/showthread.php?t=2266654 and downloaded this SuperSU: http://download.chainfire.eu/345/SuperSU/UPDATE-SuperSU-v1.51.zip
How can I boot to recovery?
Another thing does SuperSU v1.51 works on Android 4.3?
Thanks

The screen with just a red triangle is stock recovery. Press and hold power and press volume up and you should get the stock recovery menu.
Try flashing CWM from fastboot manually as it's not taking with ROM Manager (which I don't rate anyway)

EddyOS said:
The screen with just a red triangle is stock recovery. Press and hold power and press volume up and you should get the stock recovery menu.
Try flashing CWM from fastboot manually as it's not taking with ROM Manager (which I don't rate anyway)
Click to expand...
Click to collapse
Eddy, I flashed manually using the CMD, can you give me the link from CWM I'm not finding D:

rcoliveirajr said:
Eddy, I flashed manually using the CMD, can you give me the link from CWM I'm not finding D:
Click to expand...
Click to collapse
If you have root use ROM manager to flash the recovery
From my BLACKED OUT N4

I've reflashed CWM and enter Recovery Mode not booting to Android, flashed SuperSU and set CWM to prevent to Android not flash stock recovery, everything working fine
Sent from my Nexus 4 using xda app-developers app

"no command" after installing TWRP in recovery mode

hey guys! first post but I have been lurking here and there before registering.
Sorry if this is the wrong section to post this in. I am trying to root my note 4 and I installed TWRP using Odin. Now when I go into recovery mode to flash SuperSu, it says "no command" with the android guy laying on the floor. I tried the factory reset option and I installed TWRP again but still same problem. I can still load my phone and use it as usual but now I can't go into recovery mode with TWRP and flash supersu to root it. Anyone know how I can fix this problem? Any help would be appreciated.

No one knows?

kratos0605 said:
hey guys! first post but I have been lurking here and there before registering.
Sorry if this is the wrong section to post this in. I am trying to root my note 4 and I installed TWRP using Odin. Now when I go into recovery mode to flash SuperSu, it says "no command" with the android guy laying on the floor. I tried the factory reset option and I installed TWRP again but still same problem. I can still load my phone and use it as usual but now I can't go into recovery mode with TWRP and flash supersu to root it. Anyone know how I can fix this problem? Any help would be appreciated.
Click to expand...
Click to collapse
What is the model number of your Note 4? When you are at the "no command" screen, try holding the volume up button and then press the power button to take you to recovery. I'd that doesn't work try holding the power button and tapping the volume up button quickly and release all buttons and see if it allows yoj to access recovery. I'd these do not work keep trying different button combinations. I'd you still cannot access the recovery menu you may have to Odin the factory firmware and start over. Let me know what happens.
Sent from my Nexus 6 using XDA-Developers mobile app

none of those button combinations work. I will install stock firmware on it again and see if that fixes the recovery.

I had this problem in the past, I think the problem was that when I was installing TWRP via Odin that I had not powered off the phone so it looked like it installed but actually didn't, try taking out the battery and then boot into recovery or download mode whatever it is that is used for Odin and install again

kratos0605 said:
none of those button combinations work. I will install stock firmware on it again and see if that fixes the recovery.
Click to expand...
Click to collapse
If you cannot get into recovery with any button combination boot to download mode and use Odin to flash all 4 files of the factory firmware. That will give you a fresh start. Let me know how it goes.
Sent from my Nexus 6 using XDA-Developers mobile app

Same here
After holding volume up+middle button+power bar
I get into recovery mode but right after recovery mode it goes into “installing system update….” and then “No command” shows up and after that I get the following message and options:
Android system recovery
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
apply update from cache
wipe/data/factory reset
wipe cache partition
reboot to bootloader
power down
View recovery logs
Enable cp logging
Disable cp logging
and at the bottom in yellow it says;
# MANUAL MODE #
— Appling Multi-CSC…
Applied the CSC-code : GLW
Successfully applied multi-CSC.
Any sort of help would be appreciated, thank you.

amk58 said:
Same here
After holding volume up+middle button+power bar
I get into recovery mode but right after recovery mode it goes into â??installing system updateâ?¦.â? and then â??No commandâ? shows up and after that I get the following message and options:
Android system recovery
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
apply update from cache
wipe/data/factory reset
wipe cache partition
reboot to bootloader
power down
View recovery logs
Enable cp logging
Disable cp logging
and at the bottom in yellow it says;
# MANUAL MODE #
â?? Appling Multi-CSCâ?¦
Applied the CSC-code : GLW
Successfully applied multi-CSC.
Any sort of help would be appreciated, thank you.
Click to expand...
Click to collapse
Use the VOLUME UP/DOWN BUTTONS to scroll to WIPE DATA/FACTORY RESET and let it do its thing. When it's done select REBOOT SYSTEM NOW.
Tell me what that does.

fast69mopar said:
Use the VOLUME UP/DOWN BUTTONS to scroll to WIPE DATA/FACTORY RESET and let it do its thing. When it's done select REBOOT SYSTEM NOW.
Tell me what that does.
Click to expand...
Click to collapse
but this will erase all my data from the phone

Yes it will but it is the most likely way out of your bootloop. Before you wipe, connect your device to your PC and boot to recovery. Once your PC recognizes your device internal storage, transfer everything that you can think of.
Sent from my Nexus 6 using XDA-Developers mobile app

fast69mopar said:
Yes it will but it is the most likely way out of your bootloop. Before you wipe, connect your device to your PC and boot to recovery. Once your PC recognizes your device internal storage, transfer everything that you can think of.
Click to expand...
Click to collapse
I'm not in bootloop
My phone is working normally.
I'm trying to root my note 4 N910H (Android 6.0.1 Marshmallow) device
I flashed TWRP recovery using Odin
now I need to boot into TWRP recovery so I can to Flash SuperSu.zip downloaded in my device
what is happening after holding volume up+middle button+power bar
I should expect a menu with install option so I can flash the SuperSUfile in the device internal memory, instead this is happening:
it goes into “installing system update….” and then “No command” shows up and after that I get the following message and options:
Android system recovery
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
apply update from cache
wipe/data/factory reset
wipe cache partition
reboot to bootloader
power down
View recovery logs
Enable cp logging
Disable cp logging
and at the bottom in yellow it says;
# MANUAL MODE #
— Appling Multi-CSC…
Applied the CSC-code : GLW
Successfully applied multi-CSC.
Click to expand...
Click to collapse
If i choose reboot system, the phone will work fine, but I need a way to access TWRP recovery so I can to Flash SuperSu

amk58 said:
I'm not in bootloop
My phone is working normally.
I'm trying to root my note 4 N910H (Android 6.0.1 Marshmallow) device
I flashed TWRP recovery using Odin
now I need to boot into TWRP recovery so I can to Flash SuperSu.zip downloaded in my device
what is happening after holding volume up+middle button+power bar
I should expect a menu with install option so I can flash the SuperSUfile in the device internal memory, instead this is happening:
If i choose reboot system, the phone will work fine, but I need a way to access TWRP recovery so I can to Flash SuperSu
Click to expand...
Click to collapse
That looks like TWRP didn't stick when you flashed it using Odin. Try a different version of Odin and flash TWRP.
Sent from my Nexus 6 using XDA-Developers mobile app

kratos0605 said:
hey guys! first post but I have been lurking here and there before registering.
Sorry if this is the wrong section to post this in. I am trying to root my note 4 and I installed TWRP using Odin. Now when I go into recovery mode to flash SuperSu, it says "no command" with the android guy laying on the floor. I tried the factory reset option and I installed TWRP again but still same problem. I can still load my phone and use it as usual but now I can't go into recovery mode with TWRP and flash supersu to root it. Anyone know how I can fix this problem? Any help would be appreciated.
Click to expand...
Click to collapse
So idk if you've gotten it fixed, but what worked for me was: I had been turning on the phone after odin did its thing, and that caused the oem recovery to reinstall itself. So instead of letting odin auto boot be ready to push the volume up button to put it into twrp recovery. I had to remove my battery to keep it from booting fully.

We need to try another time flash. Conditions - old Odin 3.06, configured to remove reboot.

swhockey347 said:
So idk if you've gotten it fixed, but what worked for me was: I had been turning on the phone after odin did its thing, and that caused the oem recovery to reinstall itself. So instead of letting odin auto boot be ready to push the volume up button to put it into twrp recovery. I had to remove my battery to keep it from booting fully.
Click to expand...
Click to collapse
thanks you saved me lot of time today !!!

Thanks - this helped me too

i have same problem
my phone is samsung j2lte
have you try untick /uncheck the "auto reboot" option on odin app. instead reboot manually after flashing twrp??
my problem not solved either

Thank you. This helped me too.

kratos0605 said:
hey guys! first post but I have been lurking here and there before registering.
Sorry if this is the wrong section to post this in. I am trying to root my note 4 and I installed TWRP using Odin. Now when I go into recovery mode to flash SuperSu, it says "no command" with the android guy laying on the floor. I tried the factory reset option and I installed TWRP again but still same problem. I can still load my phone and use it as usual but now I can't go into recovery mode with TWRP and flash supersu to root it. Anyone know how I can fix this problem? Any help would be appreciated.
Click to expand...
Click to collapse
In ODIN go to 'options' and uncheck 'auto-reboot', then flash TWRP. When it's done, it won't reboot, just pull the battery for several seconds, reinsert it and boot into TWRP Recovery.
Enjoy!

When I try to flash any thing it gets stuck on boot.img

not booting into recovery

so here is the problem...!
i was going to flash my lg g2 d800 with custom rom which is marshmallow i rooted my mobile than install autorec after that i boot into recovery than wipe the cache data and system but not the internal storage and after that i update the twrp and then select the option boot into recovery but unfortunately my mobile stucked in bootloop whenever i tried power button + volume down button it goes into factory reset instead of recovery ....!anyone please help and i apologize for my English

When you're at "factory reset" just press yes until TWRP appears. It will not reset the phone.