Database Users

Flashing won't work unless I wipe data

UPDATE: After completely wiping everything(recovery, ROM, bootloader, etc), and putting it back in with fastboot I no longer have this problem. My recovery probably just got corrupted or something while getting sent over to the device.
Got my Nexus 7 3 days ago, had it unlocked and all that jazz within the hour(thanks to the people who put the stuff together). It's great, but I have a problem with flashing .zip files in recovery. It doesn't matter what type of thing I'm wanting to flash(ex-kernel,rom, or even the uber-simple 720p camera mod), if I don't do a full wipe before flashing, then it just ends up boot looping my device. The boot loop doesn't turn the phone all the way off, just the boot animation. Sometimes the launcher will pop up for half a second and then go back to the boot animation.
For example, whenever I flashed the rasbeanjelly rom, I first flashed that, then rebooted(got excited and forgot about gapps) and checked it out. Remembering about gapps, I went back to recovery and flashed gapps. Then it boot looped the animation. After flashing gapps again(trying different combos of wiping cache/davlik), I flashed the rasbeanjelly rom again, and then gapps immediately afterwards. Still a bootloop. So I did a full wipe(including data this time), sideloaded my .zips, and then it flashed and rasbeanjelly booted up with gapps just fine.
This exact same problem has been happening with every .zip that I try to flash(running TWRP, yes all my stuff is updated). If I want to flash a kernel, I have to flash it when I flash my ROM or else I'll get boot loop. I can't really make any modifications without having to completely wipe my device(which is annoying because I carry a lot of data around on my stuff)
I'm asking if there is a way to flash a .zip without having to completely wipe my device. I'm not a noob to android at all(ROM cooker over at androidforums), but I can't figure it out, I'd love to make stuff for the grouper but this is kind of a big roadblock for me. Logcat isn't helping either. Hopefully I just skimmed over something and it's a simple fix. Thank you for your tips/suggestions/solutions.
EDIT: forgot to mention something. When I flash a new ROM and get it going, I always make a full backup in recovery. If I flash something, and boot loop it, I can't restore it correctly. Recovery says that it restores all good, but it still boot loops(even though I just restored a backup of a non-boot looping system from no more than 5 minutes ago).

If I read your post correctly, you've only tried this on one ROM. Try the same thing on CM10 or PA or whatever you want.

korockinout13 said:
If I read your post correctly, you've only tried this on one ROM. Try the same thing on CM10 or PA or whatever you want.
Click to expand...
Click to collapse
I've actually used several, and it seems to be happening on all of them. I've tried flashing things with PA, CM10, Stock, and RasberryJelly. The kernels I have attempted to flash have been Trinity, Motley, and Franco. All with no success and boot looping me :/

[Q] Boot hangs at Android sign.

Simply put, this is what happens when a rooting newbie discovers custom bootloaders and ROMs.
Current State:
A full stock ROM installed (no root) with the Skrillax V8 bootloader plopped on top of it. (which of course means the recovery-from-boot.p file still exists and that I don't have CWM.) The tablet will show the Acer logo then the Android logo and will give the appearance of booting. Then the icon flashes. It does this intermittently and forever.
What I want:
CM 10+ running with Skrillax and TWRP stably. I'd go with Flexreaper for next choice. Maybe I'll try to compile a KitKat version for it someday. Who knows.
How I managed to get my tablet in this crappy state:
Rooted tab a long while ago with a probably far outdated method.
Looked all over the internet later on how to unlock the bootloader and settled on the manual method in this excellent thread.
I flashed V8 and TWRP without a hitch using nvflash.
I wiped and installed Flexreaper.
I liked it but wanted a higher prize. I make a nandroid backup of it onto the external_sd and wiped and installed CM 10.1 from this thread.
This is where everything started going sour. It told me the install was invalid halfway. Disappointed, I wiped again and tried to restore my nandroid backup. It seemed to restore properly, but then Skrillax hung forever loading the kernel.
I wiped again and installed Flexreaper fresh. This time it booted. I downloaded the newest unofficial version of CM they mention on their wiki.
Booted to recovery and installed CM 10. It ran fine and I was impressed with the new OS. Then I noticed the apparent lack of Gapps.
I flashed the Gapps Jellybean package and rebooted. Skrillax hung.
Wiped everything I could fine in the TWRP menu and installed Flexreaper. Got past the primary kernel loading but the android icon would work for a bit then flash, starting all over again.
At this point I flashed several other recoveries, hoping it was my recovery. No such luck. I tried all of them included in V8.
Then finally, I downloaded full stock ICS and flashed it. I rebooted and noticed the same Android flashing thing.
Finally, I flashed V8 again, being the newbie I was, and then suddenly remembered while trying to boot to recovery that the Full install probably rewrote the recovery-from-boot.p.
And here I am.
Tl;dr version:
Went click-happy with ROMs, wiping, and recovery flashing until I was left with a stock OS that wouldn't boot with a Skrillax bootloader but no recovery.
The good news is, I still have cpuid+sbk, it still boots to APX (no idea how I didn't screw that up too.), and I have a nandroid backup on my external_sd which is probably untouched, since I was careful to not wipe it in TWRP.
Please help me fix this. I don't want an excuse to waste money on a flashy new Nexus or Asus Transformer tablet, I already have too many for my wallet's comfort.

I quess you renamed stock rom to update.zip and than flashed it? If you havent do it, put it on sd card and pres power+vol down (if nuttin happens than vol up). That shld trigger flashing proces
poslato sa elmag radija

uglyjohny said:
I quess you renamed stock rom to update.zip and than flashed it? If you havent do it, put it on sd card and pres power+vol down (if nuttin happens than vol up). That shld trigger flashing proces
poslato sa elmag radija
Click to expand...
Click to collapse
I don't have access to a micro sd card reader if the file must be placed on the micro SD card. I already have flashed the stock rom supposedly via TWRP, so I shouldn't have to flash it again, I wouldn't think. If I do, I guess I'll have to get a reader.

Yes. Micro sd. Rename it. You have guodes gere on xda. Im hoping it will help you.
poslato sa elmag radija

It didn't work. Still in same state as before.

I also have access to fastboot if that would help.

m27frogy said:
Simply put, this is what happens when a rooting newbie discovers custom bootloaders and ROMs.
Current State:
A full stock ROM installed (no root) with the Skrillax V8 bootloader plopped on top of it. (which of course means the recovery-from-boot.p file still exists and that I don't have CWM.) The tablet will show the Acer logo then the Android logo and will give the appearance of booting. Then the icon flashes. It does this intermittently and forever.
What I want:
CM 10+ running with Skrillax and TWRP stably. I'd go with Flexreaper for next choice. Maybe I'll try to compile a KitKat version for it someday. Who knows.
How I managed to get my tablet in this crappy state:
Rooted tab a long while ago with a probably far outdated method.
Looked all over the internet later on how to unlock the bootloader and settled on the manual method in this excellent thread.
I flashed V8 and TWRP without a hitch using nvflash.
I wiped and installed Flexreaper.
I liked it but wanted a higher prize. I make a nandroid backup of it onto the external_sd and wiped and installed CM 10.1 from this thread.
This is where everything started going sour. It told me the install was invalid halfway. Disappointed, I wiped again and tried to restore my nandroid backup. It seemed to restore properly, but then Skrillax hung forever loading the kernel.
I wiped again and installed Flexreaper fresh. This time it booted. I downloaded the newest unofficial version of CM they mention on their wiki.
Booted to recovery and installed CM 10. It ran fine and I was impressed with the new OS. Then I noticed the apparent lack of Gapps.
I flashed the Gapps Jellybean package and rebooted. Skrillax hung.
Wiped everything I could fine in the TWRP menu and installed Flexreaper. Got past the primary kernel loading but the android icon would work for a bit then flash, starting all over again.
At this point I flashed several other recoveries, hoping it was my recovery. No such luck. I tried all of them included in V8.
Then finally, I downloaded full stock ICS and flashed it. I rebooted and noticed the same Android flashing thing.
Finally, I flashed V8 again, being the newbie I was, and then suddenly remembered while trying to boot to recovery that the Full install probably rewrote the recovery-from-boot.p.
And here I am.
Tl;dr version:
Went click-happy with ROMs, wiping, and recovery flashing until I was left with a stock OS that wouldn't boot with a Skrillax bootloader but no recovery.
The good news is, I still have cpuid+sbk, it still boots to APX (no idea how I didn't screw that up too.), and I have a nandroid backup on my external_sd which is probably untouched, since I was careful to not wipe it in TWRP.
Please help me fix this. I don't want an excuse to waste money on a flashy new Nexus or Asus Transformer tablet, I already have too many for my wallet's comfort.
Click to expand...
Click to collapse
Babsector should still work - you would need t do a search for it

It seems to have worked properly, sort of. Flashing FLEXReaper results in an "Encryption failed." prompt at boot, which the button, of course, does not work. Wiping everything works except that the prompt notes "E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p4" Trying to reflash V8 with TWRP with the V8.bat file fails at format. More help?

My tablet is still displaying "Encryption failed", the button still doesn't work, and I still love my a500. Help?
Anyone?

I guess I'm screwed, then.

In the end, I think my data partition failed. Formatting or wiping data fails and when installing FlexReaper, it reports /data size as -1. Unless anyone knows how to fix flash memory, I think I'm stuck.

[Q] Bootloop on L7. Help pls!

Hello,
First, sorry for my bad english and knowledge on flash/root.
I flashed Slimbean on my P700, everything worked fine, expect of the modem. I tried other ones, but didn't work.
So I decided to change the ROM and flashed CM10.2 on my L7 which was working fine until battery was empty. After loading my phone, I wanted to start it, but it stayed in a bootloop on the boot animation. I tried everything, wipe/dalvik wipe, flashing slimbean --> still bootloop
Now I thought, maybe CM11 could work, but still the same problem, I formated everything expect of sd, wipe/dalvik wipe, flashed the ROM, Gapps and kernel, but still the bootloop...
Any ideas?

It may take a while on first boot. But if it don't load you could restore a backup of you have one or flash a kdz or use LG update tool to fix your issue. Other than that make sure you have word everything in recovery and format system, data and cache before flashing a rom. Do not flash kernel before first boot unless it's required.

I can add to that to flash ROM only without gapps just to get OS to boot correctly.

I already solved it.
I whiped everything, formatted everything except of external sd and than first only flashed the ROM and rebooted, all worked, than i installed the Gaps, rebooted, and last i flashed the kernel, now it works fine but i will never ever reboot my phone or let battery get empty ^^ no more
thanks for your help

i9505 doens´t boot after flashing stock firmware

Hello
I was trying to update my friend´s i9505 to the latest AntaresOne CM12 build, but forgot to flash gapps, and since i coulnd´t for some reason enter CWM (the phone just reboots), i had to flash stock firmware over again so i could start over.
But now the phone isn´t booting even on stock firmware. That usually did the trick.
The wierd thing is that Phils Touch Recovery was working before, but ever since i used Triangle Away to reset binary counter, the recovery won´t boot up anymore.
The only way that i could get into Phils Recovery was to install the TWRP recovery installer, and throught the app i would tell it to flash, and it would reboot into Phils Recovery
Now since system isn´t booting, i can´t install and use the TWRP installer to reboot into recovery mode for me.
Tried to flash stock recovery, the same thing happens: the phone just black screens, vibrates and reboots.
Any ideas of why this might be happening?

Go to stock recovery if you can and wipe data/factory reset. Install stock ROM then.

@guguts
As clearly wrote in 1st post of my thread, you need to do "format /system" before installing ROM's builds starting from 26/11 one and latest ones, including 3/12 and the ones that will come in the future.
I strongly suggest you to take a look again at installation instructions, but this time carefully.
If you need anything else, write directly in its Q&A thread (you can find it in this section) where surely you can be helped more and better
Inviato dal mio GT-I9505

Flash a custom recovery with Odin. Uncheck auto-reboot before flashing.
Then boot into the recovery using the botton combo. Keep holding it as long as it takes to enter recovery.

Hey guys, i managed to work it out.
It was probably a loose vol up or home button, because i didn´t do anything but a few moments later i tried to enter stock recovery and it went fine.
The issue was not with the custom rom (which by the way is great, my friend says its running smooth).
The issue happened because i forgot to do i data wipe after installing the rom and prior to installing the stock rom.
So the stock ROM was trying to load using lollipop data and cache, and thats why it got stuck in the samsung logo.
As soon as i managed to enter stock recovery again, and made a data wipe, the stock room booted fine.
So i tried again, but this time didn´t forget to flash gapps, and even better, now Phils Recovery is booting up normally (go figure...)
So i formated /system and /data, flashed AntaresOne ROM and gapps, and everything went fine.
Just posting here in case anyone in the future goes througyht the same hassle.
Thank you so much for your work Antares.
Its people like you, quarx and pawtip (and many others top developers) that makes this community great.

Flashing another ROM turned into some bigger problem

Hi guys, the times has come for me to open up my own account - I screwed up. I hope this is the right sub forum and apologize if it is not.
LG G2 Germany, formerly: TWRP recovery, Paranoid Android 5.1.1
Loved the rom but there were some issues like the screen turning off and on randomly, wouldn't accept pin right away, so I decided to go for CM 12.1.
Booted into recovery, factory wiped, tried to flash the .zip, but neither the rom nor the gapps would even begin to flash. It just said error.
Went crazy, tried some other CM versions, none of them worked. I've never had this issue before, when I flashed PA it all went just peachy.
Went even crazier and I can't really remember what I did in my panic spiral, but I somehow ended up with a soft-bricked phone. Managed to re-install the LG firmware .kdz, however, only the 4.2 one worked (4.4 gave me a bootloop.)
Now, getting this bad boy rooted and ready to flash custom roms is somewhat of a problem. I managed to get it into recovery though (after some issues with the recovery image), but flashing CM still won't work. Same error as before. I think there may be something wrong with the recovery image. I still had the image .apk from the first time I rooted my phone (also with 4.2) and it worked just fine so I figured I'd just use it again and do it like I did it last time. However, I am able to get into recovery mode. I've tried ClockworkMod and TWRP, but as a result of my panicking, it's just really a big ol' mess right now. I hope I've included all the info needed.
Please help, I'm actually lost.

Are you flashing the latest TWRP which is 2.8.7.1?
http://blastagator.ddns.net/twrp.html

Hey, thanks for replying. At the moment it only boots into recovery, unfortunately. ADB does not work, even after re-installing the usb drivers. My computer recognizes the device now though, but I can't get any files onto that thing at the moment.
Edit: It's not the latest TWRP

If you install the latest TWRP, you may be able to boot into TWRP and copy over a ROM to flash.