Related
I have looked high and low for a similar thread (detailing my specific problem) so I apologize if it exists and I was unable to locate it. I attempted to flash the PRIMEE ROM on my Acer with all apparently going well until the end. Messages were displayed saying that data, cache, etc. could not mount or something to that effect. I foolishly rebooted only to find that the Iconia will only display "Unrecoverable Bootloader Error (0x000000004)"
That's it. It is completely unresponsive to any other attempts to factory reset. Power/volume does nothing. I have looked extensively for some solution to this problem (attempted Reset button, moving lock screen slider/power-volume combination). You name it, I've tried it. It was briefly recognized by my PC when connected via USB but the AXP drivers were not found and did not install. I'm really flummoxed here.
Again, apologies if this is a duplicate thread but it seems fairly unique in that I cannot get any response at all. I fear that I've really done it this time. Any help would be greatly appreciated.
You DID install the custom clockworkmod app from the dev section, right? Not the one from the market...
Clockwork.....
No, unfortunately I did not. Didn't even realize there was a difference. I did install the Acer Recovery App as well, but otherwise, I think I'm pretty well screwed....
Well mate,now thats a huge problem you got there. If you would've screwed the /system partition np, /data partition,also np.....But uhh,bootloader error...i got the feeling your flashing has screwed up the internal Kernel of the Device,which is connected to the Bootloader,and without a Bootloader...well as its name says,you cant boot anything. Its like a Bios to a normal Computer,if you screw up the Bios,basically you can throw your Motherboard away...and sadly,the tablet comes all together,also i dont think Acer's Warranty will do anything about it aswell since you flashed an unofficial ROM/Kernel.
Your only solution is to send it to Acer,and see if your lucky enough and they fix it for free,if not ...well pay or get another one.
Goodluck with your problem mate.
Respect.
Yeah - kinda figured as much. Very disappointed that I lost it but I suppose I can make one last ditch effort to get it to Acer and see if they'll replace it but I'm skeptical at this point. Oh well - first time for everything. Lesson learned. Thanks for the help all the same.
First, congratulations. You managed to get the unrecoverable bootloader error
--> PM me with your UID, I may help you.
..............Edited..............
You should talk with sc2k I was in the same position you're in with the Unrecoverable Bootloader Error. Sent sc2k the UID for my A500 and he was able get my A500 back up and running again.
first of all, make sure you have a sd-card.
second. dl a stock rom to your PC 1.10.42 for instance, extract with decrypter and put the update.zip on the sd-card using a card reader or maybe your phone.
the put the sd-card back on your ICONIA.
after do the following:
hit VOLUME + (volume up) and power, until it vibrates, keep you finger on volume + and toggle the screen toggle switch.
it will then say formating data and formating cache, and the will start to flash the update.zip
once finished you should be ok.
Hi,
i have the same probplem, can anyone help me?
i have installed a custom firmware from thor and enabled the 3g option, my a500 will only vibrate after reboot with the error "Unrecoverable Bootloader Error (0x000000004)"
i cant read out the UID or anything else ... can anyone help me???
APX Mode runs but i cant recover with nvflash ...
tl;dr: Interrupted update. cant do jack. tried acer tech support. failed
I grew bored with waiting the two minutes for my tablet to install the new update. so i stood up and hit the power button to put it to sleep like a boss. then i cam back later, the lock screen was unresponsive
i figured out be double tapping the pwr button i was able to unlock the tablet to see the powering down screen (see attachment). I can get to the setting menu, but evrytime i try to mess around in it, the window closes itself.
an interesting note is that the time is wrong, and the battery suddenly went from 100% to 15%
I called acer tech support, and with ther guidance...
pressed the reset button to no effect
powered on holding the pwr & vol- buttons down to get an error (see attachment). then the tablet turns off.
Ive dled some "update.zip" files i found online that are supposedly used to unbrick the tab... but i just got the same error picture(see attachment)
one other thing i tried was to hold the power and vol+ buttons. this cleared a chache, but had no other effect.
I am a noob at droid, but not to tech. i would like to avoid perma bricking, and im unsure about mailing this in. waiting is gay. I would like to restore it to factory settings w/o rooting it etc. as ive never done that before. but im not opposed to installing a CFW if it somes to that...
Im looking for ideas guys here guys. wtf is wrong with this thing?
Haha
Lmao "hit the power button to put it to sleep like a boss", funny ****.
Can't help you though sorry
ive been around he web, and have seen this exact series of symptoms happen to a handful of other guys... i haven figured out a solution yet, and it is looking more and more like ill be sending it in via warranty
my best guess at this point is i have corrupted a crucial system file. as to why i can do jack in the factorys recovery mode... idk. but then again, idk what the factorys recovery mode should look like or how it would function. youtube only shows CWR... which i dont have
if i believed i could anything reasonably withing my abilities, i would... but voiding the warranty on a long shot seems dumb.
still ANY ideas would be great
I too faced exactly the same problem today.. Dunno why this is happening... I am too worried now... Kindly post the solution as you find them...
Am sure calling tech-support is just waste of time..
Thanks in advance..
IM GOLDEN...
Ive reflashed to the original factory build. the problem was with the "update.zip" files i have been using. i guess they were corrupt.
multiupload<dot>com/WCT2FYLMQC
this is the file i used. I tried several from other guides, etc... a guy on another board told me to use this one. i put it on the root of my SD card, then held the power and vol- buttons until the loader had started. it took awhile, and it looked like it froze during the process...
DONT TOUCH IT
just let it do its thing, and it will reboot itself and run through the setup process like when it was new.
npena said:
IM GOLDEN...
Ive reflashed to the original factory build. the problem was with the "update.zip" files i have been using. i guess they were corrupt.
multiupload<dot>com/WCT2FYLMQC
this is the file i used. I tried several from other guides, etc... a guy on another board told me to use this one. i put it on the root of my SD card, then held the power and vol- buttons until the loader had started. it took awhile, and it looked like it froze during the process...
DONT TOUCH IT
just let it do its thing, and it will reboot itself and run through the setup process like when it was new.
Click to expand...
Click to collapse
How to put this file on the root folder when am not able to switchon the Tablet itself... and how reliable is this file??
stuck on same screen also!
My friend and i who both purchased this Acer Iconia tab are both having the same problem. We both received a message on the tablets to do the update. We both got stuck and have gone thru tech line and there is no remedy. She was able to return hers within the 15 day period; I on the other hand am a week over that so have to mail it to Acer for repair. I'm thinking this is more than a cooincidence and there is a problem more spread... Acer would neither verify or confirm....
buntzmehta said:
How to put this file on the root folder when am not able to switchon the Tablet itself... and how reliable is this file??
Click to expand...
Click to collapse
He said the root of his SDCARD. You can take out the sdcard and put it in a sd cardreader on a computer and copy the file to it then put it back in the tablet. The file worked for him so it might be worth trying. Just have patience while it is loading as some of these updates take a while to load and sometimes you may not see anything happening but it is. The more patches and roms you load on Android the more you'll learn to just leave it alone and let the updates finish. Its pretty rare for updates to be messed up. Its usually people getting anxious and clicking on stuff.
Good luck
Sent from my A501 using Tapatalk
still stuck on shutdown screen any updates?
Anyone had any luck with a fix? If not --sending it to Acer for warranty repair after the hurricane hits..Sure hope this isn't a wide spreasd Acer issue do to the new download. Wish I could just return the thing all together. Worked well while I had it a whole 3 weeks...... Thanks in advance for any information.
npena said:
IM GOLDEN...
Ive reflashed to the original factory build. the problem was with the "update.zip" files i have been using. i guess they were corrupt.
multiupload<dot>com/WCT2FYLMQC
this is the file i used. I tried several from other guides, etc... a guy on another board told me to use this one. i put it on the root of my SD card, then held the power and vol- buttons until the loader had started. it took awhile, and it looked like it froze during the process...
DONT TOUCH IT
just let it do its thing, and it will reboot itself and run through the setup process like when it was new.
Click to expand...
Click to collapse
Thanks a lot dear npena.. you are simply great.. i was very anxious initially to try your method as no other member here who face the same problem thanked or recommended your suggestion...
I tried it and it worked... I am really very thankful to you...
Cheers..
you are my hero indeed.. thank once again..
BuntZ
Friends, who face this problem you must try it... it just takes few mins b4 you can get your acer tab to work again beautifully without loosing any settings or installed apps... they remain intact...
Yay!
Glad you got it running again - had a similar problem when doing a ota update myself, was so worried I bricked the tab, went thru about 7 update.zip files until I found one that magically worked, letting me get back into the system and flash the correct rom for my region
hi! i have the same problem with my a500. I write a guide to solve this problem. Problem in firmware. here is the gude http://forum.xda-developers.com/showthread.php?t=1572622
I have been working on this for the past few days and for the life of me cannot figure out the problem. I'll start by just laying out a sequence of events.
Bought A500 about a month ago. OTA'd to HC 3.1 4.010.13_com_gen2
Decided not to wait for OTA 3.2 and rooted with iconiabreak.
Did not do a backup (like an idiot, i know)
Flashed Taboonay 2.0 with Thor's 2.1 kernal.
Saw awesome post to get rid of cell standby by deleting phone.apk and telephony.apk....do i did that.
Realize i am an idiot and then run a Nandroid backup.
Was happy for a few weeks when i see that Vache had updated taboonay to 2.1b and decided i wanted to do that.
Downloaded the files and started to flash with CWM. Factory, cache, dalvik wipe. Run Taboonay zip.
Get stuck in bootloop at Taboonay boot screen. $#!t......
Think "it's ok, ill just do an update.zip and go back to 3.1"
Try almost all the files on Vache's full package and update thread.
I put each one on an ext sd card and throw it into recovery boot. The Android guy with gears shows up and it looks like it is going to work.
The progress bar gets about 90-95% of the way when everything just stops. Gears animation, progress, everything.
It then reboots and gets stuck in a bootloop at the android screen. Load a different update.zip and same thing happens each time.
I try to just do a normal recovery boot, but CWM isnt there anymore and i get the ! android.
Normal reboot gives me a bootloop.
So i am stuck and asking if it is the phone and telephony apks that caused everything? if that were the case, how would i be able to load them back up since im totally locked out. I havent tried adb since im out of town for a few days. Thanks for any help that anyone can lend me. Ill try to answer any questions for any information that might be needed.
bumping for great justice~
I've tried decrypting update.zip files and vice versa.
still no luck..
try the fall back to 3.0.1
Check under development section for iconia a500. You'll see a thread for going from 3.2 to 3.0.1.
As i readd about this rom, it seems it's used in difficult cases (it removes the locks created by 3.2 stock), so it could be worth giving it a try.
rorohajj said:
Check under development section for iconia a500. You'll see a thread for going from 3.2 to 3.0.1.
As i readd about this rom, it seems it's used in difficult cases (it removes the locks created by 3.2 stock), so it could be worth giving it a try.
Click to expand...
Click to collapse
Thanks for the reply.
I don't think that will be a viable option for me since i'm not able to get my UID. i've plugged my tablet into the computer and gotten the "hardware found" bubble. It prompts me to look for drivers (which i havent be able to find) and, i assume because it's in a bootloop, wont show up on the computer.
Does anyone know why the update.zip files would fail at 90%? I think that's really the thing that boggles my mind and is most frustrating.
Did you at all have your A500 connected to your computer prior to this happening? If so then you can get the UID from by way of the Windows registry. Then you should contact SC2K and get him your UID he should be able to help you get your A500 back from the dead.
jeffw111 said:
Did you at all have your A500 connected to your computer prior to this happening? If so then you can get the UID from by way of the Windows registry. Then you should contact SC2K and get him your UID he should be able to help you get your A500 back from the dead.
Click to expand...
Click to collapse
Unfortunately, no I never plugged my A500 into my computer.
quick update:
I was able to use a different computer and found something interesting.
While trying to transfer or open a decrypted update.zip file, i get an error message saying, "Please insert the last disk of the Multi-Volume set and click OK to continue". Clicking OK just brings it back and i am forced to click cancel.
Anyone have any idea what that would mean??? It doesnt happen when I open or transfer the non-decrypted file. Only the decrypted file using Thor's Acer Update Decrypter application on HC 3.1 and 3.2 files.
While loading the decrypted update.zip on the A500, it almost instantly shows the ! android guy, while the non-decrypted files go 90-95% and then reboot into bootloop.
Any help would be greatly appreciated!
first off if you can get into recovery to flash anything.You are not bricked.
Take your SD card put in a android phone format it.
Put the card in your computer.copy a full update.zip file from dev section.likes on a post by Thor.put card.back in tab and flash.
If it stall fails repeat with a different SD card.seems smaller ones do best.
Good luck.
erica_renee said:
first off if you can get into recovery to flash anything.You are not bricked.
Take your SD card put in a android phone format it.
Put the card in your computer.copy a full update.zip file from dev section.likes on a post by Thor.put card.back in tab and flash.
If it stall fails repeat with a different SD card.seems smaller ones do best.
Good luck.
Click to expand...
Click to collapse
Thanks for your reply, first off.
I'm sorry I didn't make it clear that I had done all of those things during the events of the first post EXCEPT try a different sd card.
So I went out today and bought a PNY 2GB sd card as opposed to the SanDisk 4GB i was using. I formatted it in my Atrix 4G and threw a full update.zip file in there. The first file I tried (from Vache's http://forum.xda-developers.com/showthread.php?t=1113878 thread) was Acer_A500_4.010.38_COM_GEN1 (HC 3.1). Since I was able to open the .zip without decrypting it I loaded it only the sd card. It did the same thing as before (loaded to about 90% then freeze, reboot) except this time I got a "Boot verification failed..." message in bright red letters up at the top left of the Acer screen. Since it didn't work, I loaded Acer_A500_7.006.03_COM_GEN2 (HC 3.2) onto the sd card. Again, since I was able to open the .zip file, I assumed that there was no need to decrypt it. Loaded the sd card and put the tablet into default recovery (not CWM recovery which I no longer have). The same problem keeps happening: it loads to 90%, freezes then reboots. This time, however, it went into a bootloop at the "android" screen.
I've tried decrypted versions of those files, but I always get an error message while trying to open them and when trying to flash them in default recovery, it almost instantly goes to the ! android guy since I'm assuming those files are already decrypted and decrypting them again is bad.
Hopefully if I try enough files, I'll find the one that works...
Until then, if anyone has any ideas as to what I might be doing wrong or should be doing differently, please let me know!
Thanks.
there is a thread that has instructions on going from the OTA 3.2 to downgrade. To 3.1.look for that tthread and windows software. On that thread it talks about that error your getting.
Since I have not had this issue .can't say for sure if it will help.
Good luck sorry I can not do more to hhelp
Just a dingy blonde here.
erica_renee said:
there is a thread that has instructions on going from the OTA 3.2 to downgrade. To 3.1.look for that tthread and windows software. On that thread it talks about that error your getting.
Since I have not had this issue .can't say for sure if it will help.
Good luck sorry I can not do more to hhelp
Just a dingy blonde here.
Click to expand...
Click to collapse
Thanks for your suggestion.
I was able to find my UID from an old CWM backup file and tried this method. I attempted it last night with no success. I was actually in the middle of making a reply saying how heartbroken I was and that I was basically giving up. I decided to try it one more time and made a slight adjustment from my method last night. In the UID file, I had my UID in there as 0x0blahblahblah and kept getting the incorrect UID error in the program. When I tried taking out the first 0x in the program, it gave me an incorrect format error. That is where I was messing up.
Instead of 0x0, all i needed was 0blahblahblah in the UID file.
Attempted the upgrade utility again, and viola! It worked like a champ.
So thanks again to all that helped out and offered suggestions and to all the Devs for their outstanding work. I've definitely learned a lot from this experience.
Hi,
got a questions to ask anyone response will help. This is my third Defy from Moto. First one screen went crazy after 9 mos. some part on screen stop working so i got replace then when i getting 2nd one found this website and of course everything look interesting who would want to stuck on 2.2.1 version right when you can get to 2.3.7 now. So I start reading, save all files that needed everything seem easy so i start w/o reading some parts lol...I had tmobile MB525 so I go with top one on list SBF page. Root with superoneclick 1.95 -> flash with RSD Lite 4.9 everything went fine....finished said reboot manually (that something haven't seen on any thread) it stuck on M logo with red circle won't let me do anything else (Power+ or Power-, remove battery all that) so read again found thread said fix with JORDN_U3_97.21.51 and process went fine up and running again but this time back to 2.1, simcard no signal, all app not work beside browser with wifi which assume can fix later. did this and that (don't even remember what else I did) but don't want to mess up again which end up the phone won't even turn beside white light while connect to PC so contact Moto that the phone ran out of battery put to charge over nite been 2 days and the phone never turn back on hope to get lucky which i told them while on the phone that i know the phone was a refurblish when I got it maybe something went wrong. Yup, they send me a replacement one again so this is my 3rd Defy in one year...
I'm not sure I still want to play with it anymore but like i said I don't want to stuck on 2.2.1. but there're lot of thing I don't understand and seem risky like the 2nd Init don't even have idea how to put it in the phone with apk file which i have a zip file w/o any .apk. PPl said just put in SD card it's already apk so I did but in the file manager still can't run the dang file. so everything stop....I got another file call defy_recovery-1218-0326-signed.apk and it work but don't think it does like 2nd Init.
And if still a go, which SBF you guy do, CM7.2 or CM9. I did wrote down all info in about phone this time just incase it will help anything in future.
Thnks in advance
I suggest you not to do a thing until you understand what you're doing - and it doesn't seem to be the case here. Keep reading.
It seems that I was fiddling with my OTA and I lost my original build Kind of bummed out, and also the fact that I don't even know how to do a full backup. I did a nandroid backup which doesn't even work. I update to the new ICS firmware and messed up everything...Now I'm left in a gutter feeling utterly upset and don't know what to do. If there's anybody who pity's me, please help. It would be sincerely appreciated. I just want to start off fresh.
Mkami said:
It seems that I was fiddling with my OTA and I lost my original build Kind of bummed out, and also the fact that I don't even know how to do a full backup. I did a nandroid backup which doesn't even work. I update to the new ICS firmware and messed up everything...Now I'm left in a gutter feeling utterly upset and don't know what to do. If there's anybody who pity's me, please help. It would be sincerely appreciated. I just want to start off fresh.
Click to expand...
Click to collapse
So where are you at right now. What rom and what exactly have you done to your tab.
Mkami said:
It seems that I was fiddling with my OTA and I lost my original build Kind of bummed out, and also the fact that I don't even know how to do a full backup. I did a nandroid backup which doesn't even work. I update to the new ICS firmware and messed up everything...Now I'm left in a gutter feeling utterly upset and don't know what to do. If there's anybody who pity's me, please help. It would be sincerely appreciated. I just want to start off fresh.
Click to expand...
Click to collapse
Yeah, I share the pity with you Mate. You shouldn't have to look at that busted tab. Just put that shameful thing in a box and mail it to me, to help ease your pain. Heck, I'll toss in shipping so you won't suffer further insult and pain...
Seriously, though, there are plenty of tools and procedures here to bring it back to life.
First off, before you muck things up further, I would look in your nandroid backup, and get the UID number. Hopefully you wrote this down somewhere before you originally messed with things?
For starters, I would goto this link, and see if it works for you...
http://forum.xda-developers.com/showthread.php?t=1699277
The english steps are not the best in the world, but you will get the general idea.
MD
shaun298 said:
So where are you at right now. What rom and what exactly have you done to your tab.
Click to expand...
Click to collapse
At this moment right now, my a500 tab has that orange light on the bottom and it stays there, and when I turn on the tab it starts up normally like it would, and when it does it turns off. The strange thing is that orange charging light where the power button is, stays on even though I'm not even charging it.
I've tried changing the OTA, but after when it starts in the corner it says something like. " Not official blob" I'm not even sure I know what that even means....I have everything including nandroid backed up all the files into the SD card I had in my tab, I notice is there somewhere due to the amount of space it consumed on my SD.
So please! IF you know of any way to fix this I would be in great appreciation, also it's been a month since I've had this tab, as well I have a 2 year warranty.
Moscow Desire said:
Yeah, I share the pity with you Mate. You shouldn't have to look at that busted tab. Just put that shameful thing in a box and mail it to me, to help ease your pain. Heck, I'll toss in shipping so you won't suffer further insult and pain...
Seriously, though, there are plenty of tools and procedures here to bring it back to life.
First off, before you muck things up further, I would look in your nandroid backup, and get the UID number. Hopefully you wrote this down somewhere before you originally messed with things?
For starters, I would goto this link, and see if it works for you...
http://forum.xda-developers.com/showthread.php?t=1699277
The english steps are not the best in the world, but you will get the general idea.
MD
Click to expand...
Click to collapse
Hahaha funny guy! If you haven't seen my post its here and the reasons. Also I do have the UID saved on a text format on my pc...will that work??
So here is the issue are the current moment friend.
my a500 tab has that orange light on the bottom and it stays there, and when I turn on the tab it starts up normally like it would, and when it does it turns off. The strange thing is that orange charging light where the power button is, stays on even though I'm not even charging it.
I've tried changing the OTA, but after when it starts in the corner it says something like. " Not official blob" I'm not even sure I know what that even means....I have everything including nandroid backed up all the files into the SD card I had in my tab, I notice is there somewhere due to the amount of space it consumed on my SD.
So please! IF you know of any way to fix this I would be in great appreciation, also it's been a month since I've had this tab, as well I have a 2 year warranty.
Have you tried putting a stock update.zip on the root of your external sdcard and booting the tablet by holding the volume down button (left volume rocker) down while pressing the power button until the tablet finds the file and installs it. This should bring you back to unrooted stock ICS with locked bootloader and you can start over. Remember, this must be an update.zip file that is extracted from a stock RUU. You can't just rename a RUU file to update.zip.
Mkami said:
Hahaha funny guy! If you haven't seen my post its here and the reasons. Also I do have the UID saved on a text format on my pc...will that work??
So here is the issue are the current moment friend.
my a500 tab has that orange light on the bottom and it stays there, and when I turn on the tab it starts up normally like it would, and when it does it turns off. The strange thing is that orange charging light where the power button is, stays on even though I'm not even charging it.
I've tried changing the OTA, but after when it starts in the corner it says something like. " Not official blob" I'm not even sure I know what that even means....I have everything including nandroid backed up all the files into the SD card I had in my tab, I notice is there somewhere due to the amount of space it consumed on my SD.
So please! IF you know of any way to fix this I would be in great appreciation, also it's been a month since I've had this tab, as well I have a 2 year warranty.
Click to expand...
Click to collapse
Well, you get the orange light because your EC Pwr management is probably fubarred. That should be fixed when you install a stock rom as suggested in both mine and the other poster.
Considering you have your UID, you should be ok.
Of course I don't know if this is a 3.2 or an ICS UID. Best to have both. The sbk is the same, but the uid numbers differ.
If it's a 3.2., check the Q&A thread for a post I did for a guy earlier today.
But you should be able to follow the steps for the update I posted earlier.
Blob means Bootloader. And looks like you had an unlocked bootloader?
Try to roll back to 3.2. That's where I would start.
MD
cruise350 said:
Have you tried putting a stock update.zip on the root of your external sdcard and booting the tablet by holding the volume down button (left volume rocker) down while pressing the power button until the tablet finds the file and installs it. This should bring you back to unrooted stock ICS with locked bootloader and you can start over. Remember, this must be an update.zip file that is extracted from a stock RUU. You can't just rename a RUU file to update.zip.
Click to expand...
Click to collapse
What do you mean by RUU? Also I've tried a couple of the OTA updates, when I first got the tab it was on 3.1 HC didn't even update it or anything, just had a custom ICS ROM on it. Do you think you can post the steps or anything on how to do this properly and go fresh? It would be sincerely appreciate buddy.
Moscow Desire said:
Well, you get the orange light because your EC Pwr management is probably fubarred. That should be fixed when you install a stock rom as suggested in both mine and the other poster.
Considering you have your UID, you should be ok.
Of course I don't know if this is a 3.2 or an ICS UID. Best to have both. The sbk is the same, but the uid numbers differ.
If it's a 3.2., check the Q&A thread for a post I did for a guy earlier today.
But you should be able to follow the steps for the update I posted earlier.
Blob means Bootloader. And looks like you had an unlocked bootloader?
Try to roll back to 3.2. That's where I would start.
MD
Click to expand...
Click to collapse
Hmmm....I'm not even sure what I am doing wrong but whatever it is, it seems to be not working. I looked for you post for the earlier person that you did, but don't know what it is under. By the way when I first bought the tab it was under 3.1 HC and after getting flexreaper it became to ICS 4.0.3...
So like everytime I turn on the tab it shuts down instantly, as well every time I try to boot an update.zip file onto the SD card it shows this animation of the android with this circular sphere in it's stomach after that it falls over with a red caution sign.
Mkami said:
So like everytime I turn on the tab it shuts down instantly, as well every time I try to boot an update.zip file onto the SD card it shows this animation of the android with this circular sphere in it's stomach after that it falls over with a red caution sign.
Click to expand...
Click to collapse
In my experience the common cause for ending up with a caution sign is a corrupted update.zip (incomplete download, bad SD card, etc.). As for the tablet shutting down, my guess is that's related to the power management functions being broken.
im not THEE most savvy here but i do know a few methods and find it easy to discover lesser known ones, i feel bad for you . if you want you can skype video me and ill try talking it over and maybe a few methods? :highfive:
edit: ok from what i can tell your update was bad and your bootloader is causing problems, the power problems are probably arising from the bad power management as moscow desire told.
the tabs obviously rooted n all right? ok so how about flashing the v7 ics bootloader then trying a custom rom?......<-also recommended by moscow desire
lcd047 said:
In my experience the common cause for ending up with a caution sign is a corrupted update.zip (incomplete download, bad SD card, etc.). As for the tablet shutting down, my guess is that's related to the power management functions being broken.
Click to expand...
Click to collapse
You're right! I was able to fix it and boot up to the usual! Thanks mate!
chismay said:
im not THEE most savvy here but i do know a few methods and find it easy to discover lesser known ones, i feel bad for you . if you want you can skype video me and ill try talking it over and maybe a few methods? :highfive:
edit: ok from what i can tell your update was bad and your bootloader is causing problems, the power problems are probably arising from the bad power management as moscow desire told.
the tabs obviously rooted n all right? ok so how about flashing the v7 ics bootloader then trying a custom rom?......<-also recommended by moscow desire
Click to expand...
Click to collapse
Hi Chismay, well I thought I fixed the issue and the problem. Guess again I did not This I can't believed I used a leaked ICS OTA, kinda ruined most of the things in my tab. Lol just had it for a month and already messed it up by fooling around with it. But your help is greatly appreciated buddy! Would like to get a one on one instructions on what I should do.
Cheers!
Correct me if I'm wrong on this...
1. You originally had Honeycomb on your tablet.
2. You flashed FlexReaper on your tablet
3. You probably got a recent version of FlexReaper.
4. You never upgraded your bootloader.
5. You can still get access to recovery.
If all of these are correct, then I think I know what the problem is. It appears you flashed a rom that requires the ICS bootloader and not the Honeycomb bootloader.
This, I think, is an easy fix...
1. Download the following file: http://www.darktremor.info/files/FLEXREAPER-R12.5-ICS-1.031.00.zip (this is an older version I have on my Acer A500).
2. Put the file on your SD card.
3. Boot up into recovery (if you can't get there, stop here).
4. Once you are in recovery, flash the FlexReaper file you just put on your SD card.
5. Now try to boot and see if it works.
Let me know how it works either here, in a PM, or e-mail me at [email protected]. If you need further assistance, don't hesitate to contact me.
Mkami said:
Hi Chismay, well I thought I fixed the issue and the problem. Guess again I did not This I can't believed I used a leaked ICS OTA, kinda ruined most of the things in my tab. Lol just had it for a month and already messed it up by fooling around with it. But your help is greatly appreciated buddy! Would like to get a one on one instructions on what I should do.
Cheers!
Click to expand...
Click to collapse
tkirton said:
Correct me if I'm wrong on this...
1. You originally had Honeycomb on your tablet.
2. You flashed FlexReaper on your tablet
3. You probably got a recent version of FlexReaper.
4. You never upgraded your bootloader.
5. You can still get access to recovery.
If all of these are correct, then I think I know what the problem is. It appears you flashed a rom that requires the ICS bootloader and not the Honeycomb bootloader.
This, I think, is an easy fix...
1. Download the following file: http://www.darktremor.info/files/FLEXREAPER-R12.5-ICS-1.031.00.zip (this is an older version I have on my Acer A500).
2. Put the file on your SD card.
3. Boot up into recovery (if you can't get there, stop here).
4. Once you are in recovery, flash the FlexReaper file you just put on your SD card.
5. Now try to boot and see if it works.
Let me know how it works either here, in a PM, or e-mail me at [email protected]. If you need further assistance, don't hesitate to contact me.
Click to expand...
Click to collapse
Hahaha! Good job on guessing all that! I just followed your order from step to step and I was about to boot up normally! Everything might be erased and stuff, but hey at least I have my tablet working again :good: Case solved!