hi i bought my s4 yester day but when i connect otg it says usb connector connected but when i plug anything like mouse or flash they dont light up
can it be the otg cable problem?
sorry for crying icon it was mistake
sorry it was mistake!
sorry it was mistake!
sorry it was mistake!
dont kknow how to delet it
Related
Hi,
I do not know if it already has been discussed, but my idea is this:
i ask if is possible to build a cable miniusb with a female usb.
With this cable and with a right software maybe we can read a pendrive from our pda...
Excuse me for my bud english and thanks for attention.
bye
mascarpetta said:
Hi,
I do not know if it already has been discussed, but my idea is this:
i ask if is possible to build a cable miniusb with a female usb.
With this cable and with a right software maybe we can read a pendrive from our pda...
Excuse me for my bud english and thanks for attention.
bye
Click to expand...
Click to collapse
With some phones i know its possible, dont know about diamond, ive seen people hooking up usb gamecontrollers even. It was'nt possible on my hermes.
ok, but the concept of a cable between miniusb and usb female is possible?
in otherwords you want usb host...
there are several threads on that here already
mascarpetta said:
ok, but the concept of a cable between miniusb and usb female is possible?
Click to expand...
Click to collapse
Yes.
You can make it if you want, but you can buy it too.
Look on ebay.
ok, but once i buy a cable, what software i have to use for read a pandrive from my diamond?
mascarpetta said:
ok, but once i buy a cable, what software i have to use for read a pandrive from my diamond?
Click to expand...
Click to collapse
there is none!
As someone already have pointed out; there is no USB-host funcionality on the diamond. Even if you get the cable you request, it won't help.
If i remember correctly the touch pro has usb host. correct me if im wrong.
nilly said:
If i remember correctly the touch pro has usb host. correct me if im wrong.
Click to expand...
Click to collapse
yep, youre wrong
Hi all i don't know what happened but how come when i connect my phone to my computer it doesn't ask me if i want to charge it, mass storage, or another option i forget. I haven't connected it to my computer in awhile but i just recently wanted to put songs on it and for some reason those options doesn't pop up and it just charges the phone and thats it. Thanks for any help.
re-install driver on your computer .
hope it helps
regards
Nevermind i just figured it out, i didn't know this would matter but i had a bought a usb cord from ebay and i was using it to connect to my computer it was a lg one. I have the original on my outlet charger and i switched it and now it works, weird.
Hello everyone, this is my first post and it´s about my Defy, which, for some reason, the USB port does not work to access the phone and/or the SD Card.
1: I did a soft and hard reset and the problem persists.
2: The phone does not show up on the device manager under Windows so not even an error message saying "Device not recognized" or something. Also, it won´t show up in Ubuntu.
3. The "Connect your charger" message shows up all the time.
4. No notification in the phone when plugged to the PC .
5. Even though I can´t access the phone from the PC, I still can´t charge it through the USB port.
6. I can connect/access the phone and SD Card using Wi-Fi (Motorola Phone Portal) but not USB. I can see "Plug in USB to launch" in Phone Portal but cannot press the button, only the one referring to Wi-Fi.
PS: This is my second Defy, the first one got the same problem so I got a new one... sadly, the it happened again.
PS2: I wonder if a USB 3.0 port has to do with anything? It´s the only thing that I noticed before the USB stopped working.
Any help or hint is greatly appreciated.
well, i don't think it's an usb3 problem ...
to be sure you could try to connect your phone with an older usb2 port computer ...
is the phone charging on wall charger and usb-cable ???
if not, it really sounds like a hardware failure ... then i would send it to customer service and tell them that there is the same problem again .. maybe the just repaired something and it's faulty again ... be sure, that they are changing the faulty things ...
if your phone is charging on wall charger, it could be that it is an problem with your pc ... try another one ...
DJ_Synergy said:
well, i don't think it's an usb3 problem ...
to be sure you could try to connect your phone with an older usb2 port computer ...
is the phone charging on wall charger and usb-cable ???
if not, it really sounds like a hardware failure ... then i would send it to customer service and tell them that there is the same problem again .. maybe the just repaired something and it's faulty again ... be sure, that they are changing the faulty things ...
if your phone is charging on wall charger, it could be that it is an problem with your pc ... try another one ...
Click to expand...
Click to collapse
1. I mentioned the USB 3.0 port because it was the only common thing just before the usb conection stopped working.
2. The phone charges normally using the wall charger or usb (2.0, 3.0) cable through the PC.
3. It does not matter what PC is connected to or the OS (Ubuntu, Win7)/
Thanks for the response!
It is possible to brick it. Wtih some phone's it seems to be a common error for usb ports to be blown.
Could also be the cable... My cable that came with the defy was already snatched after a few months. My screen started going on and of when I was charging it.
labsin said:
It is possible to brick it. Wtih some phone's it seems to be a common error for usb ports to be blown.
Could also be the cable... My cable that came with the defy was already snatched after a few months. My screen started going on and of when I was charging it.
Click to expand...
Click to collapse
Is there a way to check for faulty hardware-related issues?
just test different cables, computers or even mobiles ... then you will see, what is faulty
DJ_Synergy said:
just test different cables, computers or even mobiles ... then you will see, what is faulty
Click to expand...
Click to collapse
What I meant was some software that check or even some kind of physical device.
Anyway, I know it´s not the cable or PC faulty but the phone itself. But I want to confirm if it´s software or hardware related and if there´s a fix.
Thanks!
Try using USB with logcat open. You might see something in the log that will tell you what's happening
Sent from my MB525 using xda premium
Hello people .. I have a BIG Problem .. and please help me !
Yesterday I tried to connect via OTG cable a stick to copy a few song's from it but the phone show me a message like '' To much power ... please connect to external source etc'' .. ok no problem but after that the phone not charge and the USB port it's become really HOT... and now if I connect otg cable it directly show me that message without plug in something !?!?
what i've do
Changed ROM - Kernel .. etc
Clean my USB Port
Switch battery and charger ..
and nothing ... !!!
Sorry for my bad engl . 10x !
denny_the_one said:
Hello people .. I have a BIG Problem .. and please help me !
Yesterday I tried to connect via OTG cable a stick to copy a few song's from it but the phone show me a message like '' To much power ... please connect to external source etc'' .. ok no problem but after that the phone not charge and the USB port it's become really HOT... and now if I connect otg cable it directly show me that message without plug in something !?!?
what i've do
Changed ROM - Kernel .. etc
Clean my USB Port
Switch battery and charger ..
and nothing ... !!!
Sorry for my bad engl . 10x !
Click to expand...
Click to collapse
Hello,
Did u try to change sub PCB, or connect yr PBA into another good working LCD,
U should have 1 of this problems
1. PBa is faulty and need to replace OTG IC-Charger
2. SUB PBA need to be replaced.
Hey. First of all I'm sorry about the poor English hope you'll understand me.
I purchased an mhl cable. I plugged in as it need to be and it didn't work.
After few moments the phone freezed and I did an restart.
When the phone started it recognized the hdmi cable and screamed for TV.
I tried to organize the cables that we messy in the desk and I plugged out the mhl from the phone.
When I tried to reconnect the cable until now the phone doesn't recognize it. I don't get the "hdmi cable connected" or something alse.
There is any solution for this problem??
Thank you for help and reading it..
Up