I have installed CM10.1 on my Canadian Galaxy S4 and for some reason it will not recognize my micro SD card.
The card is formatted to Fat32, and stock TouchWiz reads it no problem. When I insert the card while I am running CM10.1, I get a message in the notification bar which says "Empty SD card inserted."
What is wrong?? Can anyone help??
dalediciocco said:
I have installed CM10.1 on my Canadian Galaxy S4 and for some reason it will not recognize my micro SD card.
The card is formatted to Fat32, and stock TouchWiz reads it no problem. When I insert the card while I am running CM10.1, I get a message in the notification bar which says "Empty SD card inserted."
What is wrong?? Can anyone help??
Click to expand...
Click to collapse
Are you sure it's Fat32? What size card?
Most SDXC 64gb cards come formatted as exFAT these days (aka Fat64..). CM10.1 will not read exFAT. It will read Fat32 and EXT4. Stock rom will read Fat32 and exFAT.
Thank You
WoodburyMan said:
Are you sure it's Fat32? What size card?
Most SDXC 64gb cards come formatted as exFAT these days (aka Fat64..). CM10.1 will not read exFAT. It will read Fat32 and EXT4. Stock rom will read Fat32 and exFAT.
Click to expand...
Click to collapse
Thank you so much! This was exactly my problem and everything is working perfectly now.
I had the same problem. Does the device also read Gameloft data on the external sd as well? It's the only thing I have yet to figure out...
Related
hi all
i inserted a 4gb sd card into the dock slot. it was taken straight out of a Canon Powershot S5IS...and it didn't work
havent tried other sd cards
havent checked what format the card is in
i did try rebooting the transformer
did try undocking and then redocking
so hows sd card compatibility? what are your experiences?
i think it only reads it in FAT format.
It reads FAT32 from the miniSD port.
The SD Card Reader on the right side will read FAT and FAT32 formats but it wont read NTFS (for now).
Try putting your SD Card into your pc (if you can), then right click on it and select properties to see how its been formatted.
Mark.
mskip said:
The SD Card Reader on the right side will read FAT and FAT32 formats but it wont read NTFS (for now).
Try putting your SD Card into your pc (if you can), then right click on it and select properties to see how its been formatted.
Mark.
Click to expand...
Click to collapse
The dock's SD card reader will and does read NTFS. It has since day one on stock or custom kernels............. Guess what it reads SDXC Sd cards too..........
http://forum.xda-developers.com/showthread.php?t=1063470
@OP: I know you know but just in case. If/when you format, you will lose everything on the card.
well thank you guys. seems im the only one with sd card issues lol
im just going to have to try changing formats and try formatting..
i just presumed that a sd card pulled out of an older digicam would be in fat32 haha
yellowchilli said:
well thank you guys. seems im the only one with sd card issues lol
im just going to have to try changing formats and try formatting..
i just presumed that a sd card pulled out of an older digicam would be in fat32 haha
Click to expand...
Click to collapse
I hope it works for you. I did test with 3 cards, two old Sandisk (1GB & 2GB) and a new Sandisk 64GB SDXC. They all worked with FAT32 and NTFS and on stock and custom kernels, but I've seen some people having some problems with certain cards and classes of cards. Please post your findings. Good Luck
I got the following cards:
Transcend Secure Digital 64GB SDXC SDXC, SD 3.0, Class 10
Lexar MicroSDHC Card 32GB w/USB reader Class 10, High speed SDHC card with USB reader
The dock reads the SD card formated to NTFS fine (have not tryed to format it to another filesystem)
But the MicroSD card in the tablett itselfe only reads FAT32, and not exFAT or NTFS.
But there are several of You that got tablets that read Your MicroCD cards that are formated to NTFS?
trancemode said:
i think it only reads it in FAT format.
Click to expand...
Click to collapse
Allow me:
http://www.tuxera.com/partners/operating-systems/ (NTFS, exFAT and HFS+)
and
http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF101/TF101_Full_0418d.pdf (page 45 "Tuxera software provides support for NTFS format.")
Considering it actually allowed me to read an HFS+ usb stick....
So, unless there is some weird implementation, it should read those file systems also from the SD card reader.
ext3,ext4 is also supported.
I just tried NTFS on the MicroSD and it was a no go for me. I also tried ext3,ext4 (I'm somewhat new linux ) and that didn't work for me either. That could be me lol. So only FAT32 work for me on the MicroSD
On the SDcard. I could only get FAT32 and NTFS to work.
I tried this with stock .9 (3.0.1), 8.4.4.5 and 8.4.4.7 (3.1). Then with Prime 1.4 (3.1).
The cards I tried:
MicroSD: 3 - Sandisk 8GB, 16GB, and 32GB. I think the classes are 4, 4 and 2
SDcards: 3 - Sandisk 1GB, 2GB, and 64GB SDXC
I'm not saying the other filing systems don't work. I'm just posting what i tried.
cky2000 said:
I just tried NTFS on the MicroSD and it was a no go for me. I also tried ext3,ext4 (I'm somewhat new linux ) and that didn't work for me either. That could be me lol. So only FAT32 work for me on the MicroSD
On the SDcard. I could only get FAT32 and NTFS to work.
I tried this with stock .9 (3.0.1), 8.4.4.5 and 8.4.4.7 (3.1). Then with Prime 1.4 (3.1).
The cards I tried:
MicroSD: 3 - Sandisk 8GB, 16GB, and 32GB. I think the classes are 4, 4 and 2
SDcards: 3 - Sandisk 1GB, 2GB, and 64GB SDXC
I'm not saying the other filing systems don't work. I'm just posting what i tried.
Click to expand...
Click to collapse
Good to read that it's not only me that got problems with the MicroSD card not being willing to work witht he NFTS filesystem.
I recon this is something that Asus can fix with an firmwareupdate?
Anyone tried with USB sticks and external harddrives on NTFS file system?
I gues it should not be any dirrefence between A USB stick and an external HD
wow..
im going to give my problem sd card another go this weekend
well the first thing i plugged in was actually my external hdd. this was just a cheap enclosure with fake "VAIO" lettering on it. it relies on a erm...driver(?) called "USB to IDE Bridge" whenever it's plugged into Windows.
worked flawlessly
interesting...
my Sandisk 4gb SDHC simply refuses to work in NTFS
im guessing this is a problem between different card manufacturer and file system combo
but i can't prove it as i don't have too many sd cards lying around.
well at least i'm glad my sd card works now. i shoved it back into the camera formatted as FAT and the cam can use it just fine.
I'm pretty sure I did copy some files over to the MicroSD card when I hade formated it to NTFS before I tryed it on the TF
Not sure now tho so I will do a new test.
But if I am correct it got nothing to do with the card and the filesystem, rather with the TF and filesystems on different card-slots wich I find strange that they let it read one filesystem in one place and not in another place on the tablett.
well guys I recently bought Samsung galaxy s4 19500 and for that I bought Kingston 32gb class 10 micro sd card. it worked flawlessly
but today when I unmounted the sd card from my galaxy s4 and put it in a card reader and connected it to my pc, windows detected it but asked for to format it.I clicked format microsd 32 gb , it wont format by quick format option for NTFS, FAT32 and EXFAT formats saying windows is unable to format sd card.then I unticked the quick format option and SLOW FORMATED in FAT32 .it continued to format it till around 99% then it said cant be formatted. Now when I mounted it back in my S4 , it says blank sd card and is not detected.
ANY solution to this issue?
regards
fakeprince said:
well guys I recently bought Samsung galaxy s4 19500 and for that I bought Kingston 32gb class 10 micro sd card. it worked flawlessly
but today when I unmounted the sd card from my galaxy s4 and put it in a card reader and connected it to my pc, windows detected it but asked for to format it.I clicked format microsd 32 gb , it wont format by quick format option for NTFS, FAT32 and EXFAT formats saying windows is unable to format sd card.then I unticked the quick format option and SLOW FORMATED in FAT32 .it continued to format it till around 99% then it said cant be formatted. Now when I mounted it back in my S4 , it says blank sd card and is not detected.
ANY solution to this issue?
regards
Click to expand...
Click to collapse
return it and get a new one
card is destroyed
ok I will send it for warranty claim tomorrow, but how to format the new 32 gb sd card ? do I have to put it in card reader and format via windows first before putting in my galaxy s4?
fakeprince said:
ok I will send it for warranty claim tomorrow, but how to format the new 32 gb sd card ? do I have to put it in card reader and format via windows first before putting in my galaxy s4?
Click to expand...
Click to collapse
Just mount it in Linux. Delete all partitions using "gparted" and unmount the card and remove it from the reader. Mount it and Create the partition you want like fat32 or ext4. I won't recommend NTFS due to the fact that it very restrictive filesystem. Your card is perfect and you just need to create and mount right partitions.
BSDgeek_Jake said:
Just mount it in Linux. Delete all partitions using "gparted" and unmount the card and remove it from the reader. Mount it and Create the partition you want like fat32 or ext4. I won't recommend NTFS due to the fact that it very restrictive filesystem. Your card is perfect and you just need to create and mount right partitions.
Click to expand...
Click to collapse
thnx bro , issue was with the card reader
I am using it in FAT32 format now
I am running cm12 nightlys and have just bought a new sd card,Samsung 32gb EVO, from ebuyer and it will not mount. Is it the rom? or do I have a problem with the phone hardware ie the sd card slot?
Hey if your sd card's file system is exFAT, try to format it to FAT32 and try again.
Hope it works
Hi all,
I have a Galaxy S5 (SM-G900W8) Canadian model. I purchased a 128GB sd card and I'm running into some issues. My S5 can detect the card, and I can copy files to it. But it seems that one I hit roughly 8.08GB of used storage, anything more I add disappears after my phone reboots.
The card was formatted in FAT32 originally. I have tried exFAT but the phone is unable to read the card in this file format. I have also tried NTFS but same results as exFAT.
I have done some research and have seen others with issues regarding 64 and 128GB sd cards with Samsung Galaxy models, but no fix yet (or at least from what I've seen/read).
This card only seems to work in FAT32, but I am unable to use the full capacity of the 128GB sd card in FAT32.
I have a 32GB sd card that works just fine without issues. Not sure what file table the 32GB card is formatted in though as I did not know of this issue until recently when I discovered it so never bothered to check.
Is there a fix for this that I have not found yet? This is quite annoying.
Thanks
Probably a fake.
i dont have problem with Team MicroSD 64GB
you have to format it in your phone (ExFAT), use file explorer in your phone, do not format using PC
Talabis said:
Hi all,
I have a Galaxy S5 (SM-G900W8) Canadian model. I purchased a 128GB sd card and I'm running into some issues. My S5 can detect the card, and I can copy files to it. But it seems that one I hit roughly 8.08GB of used storage, anything more I add disappears after my phone reboots.
The card was formatted in FAT32 originally. I have tried exFAT but the phone is unable to read the card in this file format. I have also tried NTFS but same results as exFAT.
I have done some research and have seen others with issues regarding 64 and 128GB sd cards with Samsung Galaxy models, but no fix yet (or at least from what I've seen/read).
This card only seems to work in FAT32, but I am unable to use the full capacity of the 128GB sd card in FAT32.
I have a 32GB sd card that works just fine without issues. Not sure what file table the 32GB card is formatted in though as I did not know of this issue until recently when I discovered it so never bothered to check.
Is there a fix for this that I have not found yet? This is quite annoying.
Thanks
Click to expand...
Click to collapse
What sd card is this because it seems like it's a fake and may not really have all that storage. I've never had any problems with my 64 gb SanDisk micro sd card which I'm currently using.
try PC format
Hi there
You can try minitool partition wizard linkhttps://www.google.dz/url?sa=t&source=web&rct=j&url=http://www.partitionwizard.com/free-partition-manager.html&ved=0CBwQFjAAahUKEwib9oyKnvfIAhXLfxoKHVSLBKM&usg=AFQjCNFUxEI9jts4JkFFJGh5Osbjjty-uQ
After installation on PC
Connect your sd card to pc and choice fat32 format or other
Reply if this works
yanis488 said:
Hi there
You can try minitool partition wizard linkhttps://www.google.dz/url?sa=t&source=web&rct=j&url=http://www.partitionwizard.com/free-partition-manager.html&ved=0CBwQFjAAahUKEwib9oyKnvfIAhXLfxoKHVSLBKM&usg=AFQjCNFUxEI9jts4JkFFJGh5Osbjjty-uQ
After installation on PC
Connect your sd card to pc and choice fat32 format or other
Reply if this works
Click to expand...
Click to collapse
I downloaded the tool and just used the cleaner. I found problems and then I ran clean & fix and it seems to have solved the problem. Thank you very much.
So I have a Samsung Tab a6 7 T280 wifi and I've inserted a MicroSD card (128GB). I've done this with the stock os first and I just got the message card can be removed safely. and it wouldn't let me mount it.
Now I've installed the Tinker V5.1 Stock Rom over it and it still happens. (wanted a faster os on it).
I can reformat the card with twrp to be ext4 or exFAT and it doesn't change a single thing. if I insert the sd card I get a quick preparing card and then instantly the message card can be safely removed. clicking on mount sd card in storage from settings doesn't do anything except prompt same message.
I'd try a different sdcard.
Okay, so I hope I can help, I have the SM-T280, I do not use Tinker ROM, instead I debloated my stock ROM and use an SPA kernel by @_mone. If you're trying to extend storage to your tablet, you'll need to use a PC to partition the SD card two PRIMARY partitions. I used on Windows MiniTool Partition Wizard (free), and I used a FAT32 partition and an ext2 partition. With the stock ROM/kernel I had problems using ext4 or extFAT which didn't make sense to me but it is what it is, and I used the app Apps2SD to handle all the work.
The main thing, you need to make sure your SD card has TWO (2) PRIMARY partitions.
Good luck.
zenful said:
Okay, so I hope I can help, I have the SM-T280, I do not use Tinker ROM, instead I debloated my stock ROM and use an SPA kernel by @_mone. If you're trying to extend storage to your tablet, you'll need to use a PC to partition the SD card two PRIMARY partitions. I used on Windows MiniTool Partition Wizard (free), and I used a FAT32 partition and an ext2 partition. With the stock ROM/kernel I had problems using ext4 or extFAT which didn't make sense to me but it is what it is, and I used the app Apps2SD to handle all the work.
The main thing, you need to make sure your SD card has TWO (2) PRIMARY partitions.
Good luck.
Click to expand...
Click to collapse
What about the Sizes? As in one partition 60 GB the other one also 60 GB ? Or the fat32 partition 1 GB and the ext2 the rest?
Panslothda said:
What about the Sizes? As in one partition 60 GB the other one also 60 GB ? Or the fat32 partition 1 GB and the ext2 the rest?
Click to expand...
Click to collapse
FAT32 is not for large capacity storage. Use exFat. There isn't much point in having such a large ext2 partition. It's incompatible with media transfer protocols unless you use a Linux system.
This device fully supports exFAT. I use a 64gb sdcard no issues.
ashyx said:
FAT32 is not for large capacity storage. Use exFat. There isn't much point in having such a large ext2 partition. It's incompatible with media transfer protocols unless you use a Linux system.
This device fully supports exFAT. I use a 64gb sdcard no issues.
Click to expand...
Click to collapse
Well my current one is exfat formatted. works perfectly fine on PC only thing is its 128 GB.... I mean is that maybe the issue? that its to large?
Panslothda said:
Well my current one is exfat formatted. works perfectly fine on PC only thing is its 128 GB.... I mean is that maybe the issue? that its to large?
Click to expand...
Click to collapse
I wouldn't think so, I'm sure it supports 128gb cards.
Just partition it into to halves. First partition exfat. Leave the other unformatted and see what happens.
ashyx said:
I wouldn't think so, I'm sure it supports 128gb cards.
Just partition it into to halves. First partition exfat. Leave the other unformatted and see what happens.
Click to expand...
Click to collapse
partitioned into a 40 GB exFAT partition and left rest unpartitioned. Didn't change anything. if I pop it in the tablet I get a short preparing sd card notification then immediately an SD card safe to remove notification...
I'm really confused by this. The tablet is new so I doubt that it's broken but I don't know. Do you know if there's a way to check any kind of logs on Android like dmesg on Linux as an example to see what happens with the sd card?
Panslothda said:
partitioned into a 40 GB exFAT partition and left rest unpartitioned. Didn't change anything. if I pop it in the tablet I get a short preparing sd card notification then immediately an SD card safe to remove notification...
I'm really confused by this. The tablet is new so I doubt that it's broken but I don't know. Do you know if there's a way to check any kind of logs on Android like dmesg on Linux as an example to see what happens with the sd card?
Click to expand...
Click to collapse
It's best just try out another card to rule out the card.
ashyx said:
It's best just try out another card to rule out the card.
Click to expand...
Click to collapse
Welp gotta buy one first then :/
Panslothda said:
Welp gotta buy one first then :/
Click to expand...
Click to collapse
Nobody can lend one for a few minutes? Or try the card in someone else device?
Panslothda said:
So I have a Samsung Tab a6 7 T280 wifi and I've inserted a MicroSD card (128GB). I've done this with the stock os first and I just got the message card can be removed safely. and it wouldn't let me mount it.
Now I've installed the Tinker V5.1 Stock Rom over it and it still happens. (wanted a faster os on it).
I can reformat the card with twrp to be ext4 or exFAT and it doesn't change a single thing. if I insert the sd card I get a quick preparing card and then instantly the message card can be safely removed. clicking on mount sd card in storage from settings doesn't do anything except prompt same message.
Click to expand...
Click to collapse
According to Samsung, the T280 will support a 256gb SD card BUT I know from experience that SD cards over 32gb can be VERY touchy. If you use a PC to remove all of the partition and then let the tablet try to do its own formatting and it still doesn't work, I'd say you have an incompatible SD card. That doesn't mean the card is bad but that it just won't work in the T280.
As an example, a Samsung EVO+ card (which can be found on eBay for $30) will probably work while a "no name" card from China, probably won't.
lewmur said:
According to Samsung, the T280 will support a 256gb SD card BUT I know from experience that SD cards over 32gb can be VERY touchy. If you use a PC to remove all of the partition and then let the tablet try to do its own formatting and it still doesn't work, I'd say you have an incompatible SD card. That doesn't mean the card is bad but that it just won't work in the T280.
As an example, a Samsung EVO+ card (which can be found on eBay for $30) will probably work while a "no name" card from China, probably won't.
Click to expand...
Click to collapse
I always use Samsung EVO cards and they always work perfectly. Price per GB they are very reasonable too.
Scandisk ultra i find ok no matter what size
Sent from my SM-T585 using XDA-Developers Legacy app