I have a 1TB Toshiba HD and can't create any files or folders on it with my 32GB N7 GSM, nor can I transfer any files to it. I can do it on a regular flash drive though. I am running Xenon HD with the Timur-USBhost kernel. I have tried both stick mount and Paragon NTFS to no avail as well as other kernels. I assume that the drive is too large. I can open the HD and view all my files and watch movies from it, but moving anything too and from it is not working. Any help?
Sooo... Anything?
Sent from my Nexus 7 using xda premium
You didn't mention you are using an OTG-usb adapter cable. That is required for external media. I use stickmount with my OTG-usb cable and have read/write access to my external memory devices except for my WD Passport 750Gb. I think it is because of the NTFS formatting on the hd. Other external drives formatted fat32 work.
Groid said:
You didn't mention you are using an OTG-usb adapter cable. That is required for external media. I use stickmount with my OTG-usb cable and have read/write access to my external memory devices except for my WD Passport 750Gb. I think it is because of the NTFS formatting on the hd. Other external drives formatted fat32 work.
Click to expand...
Click to collapse
Yes, I am using an OTG cable that I made myself. It seems implied that I am using one because the transfers and folder creations work with thumb drives. I will try formatting the drive in Fat32 and see what happens.
Sent from my Nexus 7 using xda premium
Groid said:
You didn't mention you are using an OTG-usb adapter cable. That is required for external media. I use stickmount with my OTG-usb cable and have read/write access to my external memory devices except for my WD Passport 750Gb. I think it is because of the NTFS formatting on the hd. Other external drives formatted fat32 work.
Click to expand...
Click to collapse
I plugged my Toshiba 1TB (cavalier plus or whatever you call it) into my Nexus 7 via a USB-OTG cable and was able to transfer and watch movies off it fine using StickMount (Because the rom's built in OTG capabilities don't support exFat). It worked but it was also sucking like 900-1.2A out of the N7's USB port
I have a theory though. Maybe it's NTFS formated and he doesn't have the appropriate read/write binaries placed, With stickmount you have to manually provide the binaries on /sdcard for the read/write support, where as most will just read it, but not write to it. And typically a 1TB isn't going to be formated with Fat32 so usually it's NTFS or exFat (but most thumbdrives will be fat32).
---------- Post added at 12:25 AM ---------- Previous post was at 12:24 AM ----------
graydiggy said:
Yes, I am using an OTG cable that I made myself. It seems implied that I am using one because the transfers and folder creations work with thumb drives. I will try formatting the drive in Fat32 and see what happens.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
That you made yourself? I don't know the technical details of it, but there's more to an OTG cable I thought than just simply sticking the right plugs on both ends.
Dear god... If it works for flash drives it is obviously a correct cable. I am a small electronics engineer and have made more OTG cables and USB Jigs than I can count. I know what I am doing when it comes to making them. The only difference between an OTG cable for a Nexus 7 and just putting wires in stuff is to short out pin 4 (the ID pin) and pin 5 (the ground) together for a functional OTG cable for a Nexus 7. Other devices may not need that and then some other devices require a 100k ohm resistor in between the 2 pins. So... Again, it is obvious that my cable works if i can view stuff on the drive and use flash drives normally with creating and transferring files and folders. The only issue I have is not being able to create or transfer files and folders on the hard drive.
Sent from my SPH-D710 using xda premium
graydiggy said:
Dear god... If it works for flash drives it is obviously a correct cable. I am a small electronics engineer and have made more OTG cables and USB Jigs than I can count. I know what I am doing when it comes to making them. The only difference between an OTG cable for a Nexus 7 and just putting wires in stuff is to short out pin 4 (the ID pin) and pin 5 (the ground) together for a functional OTG cable for a Nexus 7. Other devices may not need that and then some other devices require a 100k ohm resistor in between the 2 pins. So... Again, it is obvious that my cable works if i can view stuff on the drive and use flash drives normally with creating and transferring files and folders. The only issue I have is not being able to create or transfer files and folders on the hard drive.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
If you can read but not write, then it should be obvious you have a "permission" problem. Have you tried using Root Explorer and changing the folder from RO to RW?
It is set to RW.
Sent from my SPH-D710 using xda premium
So after completing my backup of my drive, I was able to use a format utility to get fat32. Works now. Take note: when using any format utility to convert a drive that is USB 3.0 to fat32, make sure it is plugged into a 2.0 port or it won't format it correctly.
Sent from my Nexus 7 using xda premium
Related
I just got the usb adapter and it work fine with a mouse or keyboard. The problem is I didn’t get it for that. I got it to plug in an external usb drive and for that it is useless. I have tried no less than five different usb drives and the tab sees them as a usb drive but I can’t read or write to them. They are all Fat 32 and under 32gb. WHAT AM I DOING WRONG? Or is there something wrong with the adapter?
Thanks.
I'm able to transfer files with no issues at the moment.
I had success by using a file manager app I got from the market, then navigate to /usbStorage/sda
Sent from my GT-P7510 using Tapatalk
Make sure to be working in sd card usb area because if you look in the regular usb area it does not show up
If the drive is a spinning harddrive you need to use a powered hub. Plug the external drive into the powered hub, then plug the hub into the usb adapter. Then plug the adapter into the tablet. I hope this helps you.
Sent from my GT-P7510 using Tapatalk
NyPlaya513 said:
Make sure to be working in sd card usb area because if you look in the regular usb area it does not show up
Click to expand...
Click to collapse
You rock man. That was what i was doing. Looked under sd/usb and there were my files!
Thank you.
Hi people,
I read in a review that you can connect an external hard drive to the nexus 7 (the usb powered ones) via a USB Host Cable.
Could any of you tell me if this is correct or not? As i have an Archos 80 g9 and i know it cant do it off the micro usb only the USB 2.0 slot it has.
Thanks a lot for the help
Regards
Kurpter
Yes, it is possible but you may need to provide external power to the drive. Use a powered usb hub or something like that. The Nexus 7 most likely won't be able to output enough current to power a spinning drive.
Ah ok, so you are saying that you plug the usb host connection from the nexus to the usb hub and plug the hard drive in to another port on the hub?
I just want to know if this works as 16GB isnt much space when you want to take it on a trap to watch films.
cheers
you need to be rooted. my understanding is flash drives or micro sdcards are good to go, not sure an external hd will work unless powered as previous poster alluded
Sent from my ADR6400L using Tapatalk 2
Since N7's have been out for a few days, has anyone tried hooking up a portable hdd using a micro otg cable? I could plug my portable Toshiba hdd into my Acer A500 tablet without rooting and it would read the contents of the drive just fine. I would watch movies and view pictures as if it were an sd card. Wondered if the N7 unrooted could do the same?
ezzkmo said:
Since N7's have been out for a few days, has anyone tried hooking up a portable hdd using a micro otg cable? I could plug my portable Toshiba hdd into my Acer A500 tablet without rooting and it would read the contents of the drive just fine. I would watch movies and view pictures as if it were an sd card. Wondered if the N7 unrooted could do the same?
Click to expand...
Click to collapse
No it does not mount the external storage nor does it have an option to do so. You need to root and install chainfire's stickmount app for this to work.
clockcycle said:
No it does not mount the external storage nor does it have an option to do so. You need to root and install chainfire's stickmount app for this to work.
Click to expand...
Click to collapse
Yes, root and stickmount. Does anyone need me to test an external hard drive? I can if you guys want.
Sent from my Nexus 7 using xda premium
I use a Seagate Wireless Drive
kurpter said:
Hi people,
I read in a review that you can connect an external hard drive to the nexus 7 (the usb powered ones) via a USB Host Cable.
Could any of you tell me if this is correct or not? As i have an Archos 80 g9 and i know it cant do it off the micro usb only the USB 2.0 slot it has.
Thanks a lot for the help
Regards
Kurpter
Click to expand...
Click to collapse
Hi. I decided to use a wireless drive to store all of my music, movies and documents. So, I purchased the Seagate GoFlex Satellite Mobile Wireless Storage. You can use with Android or IOS devices. I love it.
Yes, its a no-go out-of-the box connecting to a USB thumb drive or a powered HD with a microUSB OTG cable. This doesn't really surprise me, though, because they would need to dynamically detect the device type and mount it on the system. What I haven't tried is a USB keyboard. Anybody do that?
wiithepeng said:
Yes, root and stickmount. Does anyone need me to test an external hard drive? I can if you guys want.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
yes could u test it out? i was thinking of buying a portable hard drive but not sure if it will have enough power to use it
does usb 3.0 work? or do i need to buy a usb 2.0
I've tested mine with an old 60GB WD Passport and a new 500GB Freecom XXS. Both are 2.5" USB powered external HDDs, and both worked fine.
chris100575 said:
I've tested mine with an old 60GB WD Passport and a new 500GB Freecom XXS. Both are 2.5" USB powered external HDDs, and both worked fine.
Click to expand...
Click to collapse
great thanks for the info. btw is the new one using usb 3.0 or 2.0? do u know if usb 3.0 will work?
I just plugged in a full-sized USB keyboard using my OTG cable and it works fine. I can touch type, use the cursor keys including ctrl+arrows to skip words, bring up menus with the context menu key just to the left of the right-hand ctrl key, etc, etc. I'm sure it must be using up my battery at a faster rate, though.
Edit: It's just occurred to me that there's a problem with using a USB keyboard to type when the N7 is in portrait mode: finding a stand to hold the tablet upright at the right angle when the USB-OTG cable is sticking out of the USB port at the bottom of the tablet.
Mind you, it's great being able to type at full speed without a soft keyboard hiding a large chunk of the screen.
--
Sent from my Nexus 7 using Tapatalk 2
garryknight said:
Edit: It's just occurred to me that there's a problem with using a USB keyboard to type when the N7 is in portrait mode: finding a stand to hold the tablet upright at the right angle when the USB-OTG cable is sticking out of the USB port at the bottom of the tablet.
Click to expand...
Click to collapse
You can get OTG cables with a right angled micro-USB plug on them, which might help your stand problem. I have one on its way as I was concerned about knocking/bending/snapping the straight plug when its sat on my lap in portrait mode.
Edit: It's just occurred to me that there's a problem with using a USB keyboard to type when the N7 is in portrait mode: finding a stand to hold the tablet upright at the right angle when the USB-OTG cable is sticking out of the USB port at the bottom of the tablet.
Click to expand...
Click to collapse
Or, just turn the tablet upside down so the cable is pointing up. The display will rotate appropriately.
I think but not sure that you'll want cm10 for the rotate from any angle thing...
chris100575 said:
I've tested mine with an old 60GB WD Passport and a new 500GB Freecom XXS. Both are 2.5" USB powered external HDDs, and both worked fine.
Click to expand...
Click to collapse
how did you manage it ??did you use nexus media importer
Without a custom kernel, the external hdd won't work with Stickmount or NMI if it is formatted NTFS. I haven't actually used NMI, but others have posted about the NTFS issue.
Hi,
Is it possible to mount an 2.5" HDD without an external power source?
I would like to buy an Western Digital HD Elements SE 1TB 2.5 USB 3.0 but I do not know whether it is working with my Nexus 7 or not...
A usb stick (with an usb OTG) is working but a real hdd needs a lot more power.
And a self powered hdd (with wifi) is not an solution for me.
Thanks in advance!
Xdii said:
Hi,
Is it possible to mount an 2.5" HDD without an external power source?
I would like to buy an Western Digital HD Elements SE 1TB 2.5 USB 3.0 but I do not know whether it is working with my Nexus 7 or not...
A usb stick (with an usb OTG) is working but a real hdd needs a lot more power.
And a self powered hdd (with wifi) is not an solution for me.
Thanks in advance!
Click to expand...
Click to collapse
It depends. I had to splice 5 volts of power into the usb cable of my older usb 2.0 ext hdd to get it to spin up and mount, but some others I know say they dont need ext power on their newer usb 3.0 ext hdds. But, I dont know if it is all usb 3.0 drives.
Sent from my Nexus 7 using xda premium
I have wd element 1TB usb 3 and it's work good with me nexus 7, while my old 180gb seagate cannot be mounted, it's led only light up for 3 second then just died.
Sent from my Nexus 7 using xda premium
Let's say, I buy a 2.5" hdd without external power source but I have no luck and it can't be mounted (not enough power). Is it possible to somehow plugin an external power source, so the hdd can spin up and mount?
ucubz said:
I have wd element 1TB usb 3 and it's work good with me nexus 7 [...]
Click to expand...
Click to collapse
That means, a usb OTG is wokring fine with usb 3.0? Usb 3.0 is compatible with usb 2.0, but I was a bit concerned that the usb 3.0 to usb 2.0 to micro usb 2.0 combination may cause problems.
I know I'm reviving a thread a bit here, but I have a WD Elements USB3 1TB drive and an OTG cable.
When I first got the drive and cable, it all mounted and worked great. It wasn't until I hooked it up to a PC for the first time to transfer stuff to it that I started getting issues.
Now, I can use it with the PC no worries, but it won't mount on my N7. It'll sometimes flash up that there's something, but then nothing. Is the format wrong? Should I go with making it ext4 rather than NTFS?
Been hunting for more info on it, and will continue to do so, just hoping that someone else has come across this and has a fix or some idea on what's going on.
Thanks
My guess: The Nexus 7 has not enough power to spin up and mount the drive. You have to use an powered hub (e.g. Y-cable with external power source).
Can anybody test the Note 3 with a USB OTG cable and external hard drives?
If you are rooted and using the app "Stickmount" https://play.google.com/store/apps/details?id=eu.chainfire.stickmount, one should be able to mount a FAT32 partition to their phone.
If you don't want to format your hard drive to FAT32, then using the app "Paragon exFAT, NTFS & HFS+" https://play.google.com/store/apps/details?id=com.paragon.mounter would allow to mount another partition type.
It would be very interesting to find whether the Note 3 can provide enough power to external hard drives (portable hard drives with no included power supply) during the read and write processes.
Even though a USB 2.0 OTG cable is all that is available (to my knowledge), it would still be very useful to have the full 500mA available on the USB 2.0 portion of the Note 3 USB port.
Most smartphones have much less than 500mA on tap for the OTG connections.
I was able to connect a 500 mA (2.5" 5400 RPB SATA) from ADATA hard drive to the Note III!
Really unexpected. Connected the OTG connector first, then connected the drive to the female USB A port on the connector.
On my Note II it would try to spin up, squeal and spin down.
@Class said:
I was able to connect a 500 mA (2.5" 5400 RPB SATA) from ADATA hard drive to the Note III!
Really unexpected. Connected the OTG connector first, then connected the drive to the female USB A port on the connector.
On my Note II it would try to spin up, squeal and spin down.
Click to expand...
Click to collapse
Awesome, good to hear. Have you tried large file writes and reads to and from the drive in order to see if it is able to complete a write operation? If it can handle writing a bunch of data without corruption, then it very well may have full 500mA output capability.
thanks for the report!
I was able to delete a file from a FAT32 formatted drive. No need to install anything extra. Even though there is a 4GB file size limit, FAT32 is unfortunately the only format everything can read without additional software.
Even windows can't read Ext3/4 without additional software - and the software isn't just click and install good to go.
@Class said:
I was able to delete a file from a FAT32 formatted drive. No need to install anything extra. Even though there is a 4GB file size limit, FAT32 is unfortunately the only format everything can read without additional software.
Even windows can't read Ext3/4 without additional software - and the software isn't just click and install good to go.
Click to expand...
Click to collapse
Just wondering if anybody has any more info on the Note 3 output current? I hope it can power a Western Digital My Passport 2TB 3.0 as well as some DACs, such as the Musicstreamer II without providing insufficient power to those devices.
I went into a store and found that it will power a Western Digital 2tb my passport drive. It wouldn't read NTFS, so either root or exFAT may be required.
I confirm works well on my OTG usb 2.0 from S 2
Sent from my CruelB Note 3 SM-N9005 Snapdragon 800 using Tapatalk
I've used a SONY GoogleTV (with Bluray) to play media files (mkv, avi, mp4, etc) through ViMu app. Two 128 GB thumb drives stayed connected to the USB ports in the back of the unit at all times for kids' movies, while I utilized the front USB port once in a while to connect a WD 1TB portable external HD to watch movies.
Now, we moved to FireTV and I’d like to carry over the same setup through XBMC and StickMount. Obviously, having only 1 USB port limits this. I tried connecting a USB hub (non-powered, “mobile”); although the thumb drive worked fine, the external HD wasn’t powered. Looks like I’ll need a powered USB hub to be able to connect what I listed above.
Is there a particular one that works better with the FireTV?
Can StickMount handle mounting 2-3 USB drives and an external hard drive simultaneously? When it's time to unmount the external HD, will I be able to pick that specifically or "unmount" will get rid of thumb drives as well?
Thanks!
tenderidol said:
I've used a SONY GoogleTV (with Bluray) to play media files (mkv, avi, mp4, etc) through ViMu app. Two 128 GB thumb drives stayed connected to the USB ports in the back of the unit at all times for kids' movies, while I utilized the front USB port once in a while to connect a WD 1TB portable external HD to watch movies.
Now, we moved to FireTV and I’d like to carry over the same setup through XBMC and StickMount. Obviously, having only 1 USB port limits this. I tried connecting a USB hub (non-powered, “mobile”); although the thumb drive worked fine, the external HD wasn’t powered. Looks like I’ll need a powered USB hub to be able to connect what I listed above.
Is there a particular one that works better with the FireTV?
Can StickMount handle mounting 2-3 USB drives and an external hard drive simultaneously? When it's time to unmount the external HD, will I be able to pick that specifically or "unmount" will get rid of thumb drives as well?
Thanks!
Click to expand...
Click to collapse
i have bought a USB 3.0 mains powered hub (4 ports) so will let you know later how it goes with 3 portable 1TB HDDs attached.
DEREKTROTTER said:
i have bought a USB 3.0 mains powered hub (4 ports) so will let you know later how it goes with 3 portable 1TB HDDs attached.
Click to expand...
Click to collapse
Thanks. Did it work?
tenderidol said:
Thanks. Did it work?
Click to expand...
Click to collapse
hi,
yes it is working perfectly.
here is what i bought: http://www.ebay.co.uk/itm/131220799541
I have tested it with 3 HDD's attached
> 1TB portable (FAT32 formatted)
> 1TB portable (NTFS formatted)
> 2TB portable (NTFS formatted)
All plugged in at once and i could navigate them fully and play files. I tested a 7GB MKV on each and all played perfectly.
1 Downside:
The Amazon Fire TV fails to boot if the powered USB is plugged in on startup (hangs at amazon white logo)
I have heard someone else mention this also, would love a solution to this as they will then get mounted by stickmount automatically.
Currently got to boot without USB hub > connect hub > mount via stickmount.
Hope this helps
DEREKTROTTER said:
1 Downside:
The Amazon Fire TV fails to boot if the powered USB is plugged in on startup (hangs at amazon white logo)
I have heard someone else mention this also, would love a solution to this as they will then get mounted by stickmount automatically.
Currently got to boot without USB hub > connect hub > mount via stickmount.
Hope this helps
Click to expand...
Click to collapse
I don't use stickmount ([url="http://www.jocala.com/adbfire.html]adbFire[/url] uses its own disk mounting solution), but my powered Dlink hub does not interfere with the FireTV boot up. That's with 3 drives attached.
DEREKTROTTER said:
hi,
yes it is working perfectly.
here is what i bought: http://www.ebay.co.uk/itm/131220799541
I have tested it with 3 HDD's attached
> 1TB portable (FAT32 formatted)
> 1TB portable (NTFS formatted)
> 2TB portable (NTFS formatted)
All plugged in at once and i could navigate them fully and play files. I tested a 7GB MKV on each and all played perfectly.
1 Downside:
The Amazon Fire TV fails to boot if the powered USB is plugged in on startup (hangs at amazon white logo)
I have heard someone else mention this also, would love a solution to this as they will then get mounted by stickmount automatically.
Currently got to boot without USB hub > connect hub > mount via stickmount.
Hope this helps
Click to expand...
Click to collapse
Thanks for the update. I suspected it will do that. I have the same problem when I want to boot from a powered hub. I can boot from the ssd plugged in directly in the aftv usb port, but not via hub.
The problem is I cannot plug in any other usb device like a keyboard or mouse or even my usb receiver. It's a pity the aftv does not allow any other bluetooth keyboard or mouse connected to it.
Maybe one of the guys can look into it to get a drive to be booted from a powered usb hub
jocala said:
I don't use stickmount ([url="http://www.jocala.com/adbfire.html]adbFire[/url] uses its own disk mounting solution), but my powered Dlink hub does not interfere with the FireTV boot up. That's with 3 drives attached.
Click to expand...
Click to collapse
can you link me to the hub you have? would like something i can keep plugged in and will boot up.
Also with the adbfire method, you still have to mount on every reboot with it right?
DEREKTROTTER said:
hi,
yes it is working perfectly.
here is what i bought: http://www.ebay.co.uk/itm/131220799541
I have tested it with 3 HDD's attached
> 1TB portable (FAT32 formatted)
> 1TB portable (NTFS formatted)
> 2TB portable (NTFS formatted)
All plugged in at once and i could navigate them fully and play files. I tested a 7GB MKV on each and all played perfectly.
1 Downside:
The Amazon Fire TV fails to boot if the powered USB is plugged in on startup (hangs at amazon white logo)
I have heard someone else mention this also, would love a solution to this as they will then get mounted by stickmount automatically.
Currently got to boot without USB hub > connect hub > mount via stickmount.
Hope this helps
Click to expand...
Click to collapse
I don't have this problem. Using a Belkin 4 port USB 2 hub, but I only have one HD attached.
jmerrilljr2 said:
I don't have this problem. Using a Belkin 4 port USB 2 hub, but I only have one HD attached.
Click to expand...
Click to collapse
is that usb powered though? or mains powered
usb powered doesn't handle my 2tb HDD very well, but fine for flash drives.
DEREKTROTTER said:
is that usb powered though? or mains powered
usb powered doesn't handle my 2tb HDD very well, but fine for flash drives.
Click to expand...
Click to collapse
Yes, it's powered. Running LaCie Rugged Mini 500gb.
DEREKTROTTER said:
can you link me to the hub you have? would like something i can keep plugged in and will boot up.
Also with the adbfire method, you still have to mount on every reboot with it right?
Click to expand...
Click to collapse
No. You can set your boot as persistent so you don't have to remount.
My Dlink is a few years old. I don't see it listed, only newer models.
jocala said:
No. You can set your boot as persistent so you don't have to remount.
My Dlink is a few years old. I don't see it listed, only newer models.
Click to expand...
Click to collapse
Thanks for your reply. Could you please provide the details of the adb mount method? Apologies, if it's a basic question... still new to AFTV.
I purchased a powered USB 2.0 hub to test things out. The connected USB sticks and the WD portable HD work great with the hub. Using StickMount, they're loaded at the time of boot, and when I pick Unmount to remove the WD HD, upon pulling the USB cable of the HD, USB sticks remain mounted (don't need to hit mount again).
With this particular powered hub FireTV boots fine when it's connected; seems like certain powered hubs block the boot sequence. I tried the boot sequence with just the USB sticks and USB sticks + WD HD, and it booted fine each time.
The only issue I have is that when I "map" the external drives, I give them names and they're listed under video sources. Unfortunately, StickMount doesn't load them in the same order every time, and the shortcuts point to invalid paths when there are more than one USB sources attached. I can create a root "USB" shortcut that lists all the sources and I can navigate to each drive, but that makes the process complicated for grandparents and kids. If there's a more "permanent" way to mount the attached drives (adb may be?), I'd like to try that.
Thanks!
tenderidol said:
Thanks for your reply. Could you please provide the details of the adb mount method? Apologies, if it's a basic question... still new to AFTV.
I purchased a powered USB 2.0 hub to test things out. The connected USB sticks and the WD portable HD work great with the hub. Using StickMount, they're loaded at the time of boot, and when I pick Unmount to remove the WD HD, upon pulling the USB cable of the HD, USB sticks remain mounted (don't need to hit mount again).
With this particular powered hub FireTV boots fine when it's connected; seems like certain powered hubs block the boot sequence. I tried the boot sequence with just the USB sticks and USB sticks + WD HD, and it booted fine each time.
The only issue I have is that when I "map" the external drives, I give them names and they're listed under video sources. Unfortunately, StickMount doesn't load them in the same order every time, and the shortcuts point to invalid paths when there are more than one USB sources attached. I can create a root "USB" shortcut that lists all the sources and I can navigate to each drive, but that makes the process complicated for grandparents and kids. If there's a more "permanent" way to mount the attached drives (adb may be?), I'd like to try that.
Thanks!
Click to expand...
Click to collapse
adbFire provides two different ways to mount your drives and sticks: standard, by device name (/dev/block/sda1, etc) and by the drive's UUID, a unique identifier that each drive stick is given when formatted. Mounting by UUID guarantees that each drive is always mounted at the same mount point.
adbFire creates a script that is automatically run at boot to mount your drives. It uses the busybox run-parts command to run scripts which it places in /etc/init.d. It handles drives formatted with EXT?, ExFat, NTFS and VFAT. UUID is a work in progress, just introduced in the current version, v1.14.
adbFire has a topic here in the xda Fire TV forum. Feel free to ask further questions there.
just EXT?
so atm i cant mount my NTFS and FAT32 drives with that method?
DEREKTROTTER said:
just EXT?
so atm i cant mount my NTFS and FAT32 drives with that method?
Click to expand...
Click to collapse
Look again. EXT2/3/4 NTFS,ExFAT and VFAT.
In my case I only have my external usb 3 ssd that I connect., which means there is no need to give it any priority. I have moved all the AFTV storage to the ssd and boot up from it. All I need is a usb 3 hub that is compatible with the external to boot my AFTV up. I can then connect anything else to the usb hub.
So frustrated, got a powered usb hub and connected 2TB HDD and its turned out a fail. XBMC freezes up / stickmount takes forever and sometimes not at all.
Got the fire tv mainly to play back my movie collection but seems it wont be done so easily.
I exchanged the 4 port hub with a 7 port hub and filled up all the ports with USB sticks and hard drives. FireTV boots while the hub and all the drives are connected, and everything works fine. If you don't need a USB 3.0 hub for other things down the road, you might want to give this one a try.
tenderidol said:
I exchanged the 4 port hub with a 7 port hub and filled up all the ports with USB sticks and hard drives. FireTV boots while the hub and all the drives are connected, and everything works fine. If you don't need a USB 3.0 hub for other things down the road, you might want to give this one a try.
Click to expand...
Click to collapse
Thanks for the links... Will keep an eye out for them for BlackFriday. Since I am on the market for 3 ( 3 FTV's ). I was leaning on getting 3 Transcend TS-HUB3K Powered USB 3.0 - 4 Port Hub's But is not like the AFTV's will ever need USB 3.0. The price on the 7 port hub should cut my per unit price by half after coupons... Wonder how low can they go..
has anyone used a powered HDD with the fire tv directly? e.g a 4TB seagate
i would assume they would not need a powered hubbut not sure
Really frustrated as i have 2 portable HDD and both experience freezing and buffering with movie playback from them. I sometimes have to reboot the AFTV just to stop the freezing. I got a fire TV to replace a WD HDTV live as i was getting freezing on there and it seems to be still happening :/
Please post here the HDDs you use that play files perfectly.
Thanks