Hey Guys anyone on Vodafone NZ here with a custom rom with working LTE? or still have the LTE option? if so please share your steps since all the roms with multiple csc dont have ours.
thanks
Even though noone replied for future reference here is how I did it.
Stock rom.
Use odin to flash phils recovery
Boot into recovery and in mounts and storage format data system caches and preload
Flash the prerooted version of the the rom you want if avaliable or just use the stock version.
Give your phone a start up to check everything works fine if not reflash in odin
If everythings ok boot into download mode and flash phills recovery or twrp
Boot into recovery and flash the custom rom no wipe and enjoy everything working as it should.
Hope this helps
Swyped on my SGS3
Related
hello everyone,if i flash with odin a clean samsung base all works well...but if i try to flash via cwm miui or ICS i can only see the cwm menu:every time i reboot,the phone goes automatically in the cwm menu.I have tried a full wipe before and after the rom flash but with no results...i need help
Problem Solved
Hi guys, I have a little bit of a problem and I was wondering if anybody can help me... I had CM 10.1.3 installed on my S4 I9505 intl and after installing Adam kernel the phone didn´t boot up anymore, so I went to Recovery and I did a wipe data/ factory reset, wipe cache and also format system and format /data and /data/media (/sdcard) hoping to install the official rom via Odin using the DL mode. After reboot, I got the message Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. First, I tried to install the official rom by booting up the phone in DL mode but it didn´t work, the update stops right at the beginning of the provess, then I tried to recover via Kies but Kies doesn´t recognize the phone neither. So I installed CWM again via Odin ( successfully ) and flashed CM again. Can anyone help me figure out what´s wrong and what needs to be done in order to be able to flash the stock rom ? Thanks !!
just download a .zip variant and flash it via CWM
rebel1735 said:
just download a .zip variant and flash it via CWM
Click to expand...
Click to collapse
Yes I thought of that but I can´t find a .zip variant, do you by any chance have a link for that ?
Why would you flash a kernel for Samsung roms when you are on a CM rom? That will not work.
So from what I understand, Odin works but you can't flash a stock rom? What stock rom did you want to flash? I hope that you didn't try to flash a Knox enabled stock rom. Did you try other stock roms?
Lennyz1988 said:
Why would you flash a kernel for Samsung roms when you are on a CM rom? That will not work.
So from what I understand, Odin works but you can't flash a stock rom? What stock rom did you want to flash? I hope that you didn't try to flash a Knox enabled stock rom. Did you try other stock roms?
Click to expand...
Click to collapse
I am trying to flash I9505VJUBMG3_I9505ZTOBMG3_I9505VJUBMG3 and yes Odin works I just can´t flash the stock ROM. I installed this rom many times before and I also tried an older version as well and still no luck.
Hi I hope you can help me with this,
I was on a custom 4.3 rom running on old bootloader. I then
updated to 4.4.2 rom but my camera is not working only a black screen and giving
me a warning message " Camera failed" and once that happens
the whole system lags. I've read around that it could be a hardware
problem but when I switched back to the 4.3 rom the camera is working
smoothly again. I have tried 3 different 4.4.2 custom roms but same issue persists.
My question is could this have anything to do with my bootloader? I am planning
on flashing a stock 4.4.2 firmware with the new bootloader to see if that helps but what
worries me is if this doesn't help then I have no way anymore to go back to
a 4.3 firmware where my camera still works. Can you help me point to a solution
to this problem? Or which stock firmware I should flash to test if my camera
will work on that firmware.
Did you fully wipe before flashing?
Lennyz1988 said:
Did you fully wipe before flashing?
Click to expand...
Click to collapse
Yes full wiped in Aroma, Formatted Int/ext card from Philz recovery, restored factory
from rom didn't help either.
What custom rom did you flash? Do you use the correct modem for the old bootloader?
Lennyz1988 said:
What custom rom did you flash? Do you use the correct modem for the old bootloader?
Click to expand...
Click to collapse
I have tried Phoenix ROM, GoldenEYE , ECHO ROM, I am not sure if
I am using the right modem though I just flashed the file suggested on this page.
I'm on the Phoenix rom and it's running stable for me. I am also running on the old bootloader.
I had troubles at first after upgrading to 4.4.2, but after I wiped /system in recovery, everything worked.
You could try it. Make sure to backup /efs to your external sd or pc. Backup your entire internal sdcard, because it will be wiped. I didn't know that, so I lost everything on my sd
Perform a full wipe. Then wipe /system from the recovery (i used clockwork recovery). After that just flash and don't install any tweaks in aroma.
Hello,
I've rooted my own note 3 and flashed Temaseks unofficial cm 12 rom. Everything works perfect so I decided to do the same thing for my father. It all went well, first I rooted his phone, then I flashed CWM and flashed cm 12 by temasek. The rom works fine but I forget to install the Gapps. So I tried to install Gapps but I got an error "Failure Status 6". I googled on that error and someone told it has to do something with CWM. I tried to flash a different version of CWM but now I can't reboot into recovery mode anymore. So I can't flash anything.
I flashed another version of CWM but this one also doesn't work. Whenever I try to boot the phone into recovery mode, the blue line shows up. Rebooting into recovery mode, but after a few secs, the phone just boots the normal way. Is there anyone that can help me to get CWM back to work? In the mean time I'll try to flash TWRP by Odin.
Thanks in advance!
So I flashed latest version of CWM: Buildversion; 6.13.0, CWM Base Version V6.0.4.7. I can reboot into recovery now but still can't install Google Apps due to failure status 6. On my own Phone I run a different version of CWM, but when I try to flash it, the phone won't boot into recovery mode anymore. It only boots into recovery when I flash this V6.0.4.7 . How can I get rid of this version and flash an older version of CWM?
You'll probably have to Odin back to stock and start over...
Morningstar said:
You'll probably have to Odin back to stock and start over...
Click to expand...
Click to collapse
You mean If there is no other way to get the Google Apps on the phone, I have to go back to stock. I did make a backup with CWM on the while it was running custom firmware. Now I have 4 files on my comuter, 3.tar and 1.md5 . If I recover them, I will still have this not working CWM version on my phone right? Isn't there a easier way to delete CWM, can I flash TWRP over CWM and see if it will install these Gapps?
Yeah, you should be able to flash TWRP over it. TWRP is much better anyway, in my opinion. Once you get the recovery issue sorted, I really wouldn't't recommend trying to flash just the gapps. It would probably work, but it's also quite likely to cause some weird issues. It's always best to flash gapps immediately after flashing a ROM, without leaving recovery.
I would flash TWRP, wipe everything but your internal SD, re-flash the ROM, flash the gapps, and everything should be cherry.
Edit: here is the link to download TWRP.
Morningstar said:
Yeah, you should be able to flash TWRP over it. TWRP is much better anyway, in my opinion. Once you get the recovery issue sorted, I really wouldn't't recommend trying to flash just the gapps. It would probably work, but it's also quite likely to cause some weird issues. It's always best to flash gapps immediately after flashing a ROM, without leaving recovery.
I would flash TWRP, wipe everything but your internal SD, re-flash the ROM, flash the gapps, and everything should be cherry.
Edit: here is the link to download TWRP.
Click to expand...
Click to collapse
I appreciate your effort, thank you. The recovery issue is solved. I flashed Chainfires Root script and that installed the stock recovery. However, when I tried to install and older CWM version I got back in the recovery reboot cycle. But once I installed the latest CWM it booted in recovery. So I flashed Chainfires Root once again and had the stock recovery back. From there on I tried to install TWRP but got the recovery boot cycle again. My phone is now running android 5.0.2 and I think that's the problem.... :S I'll try again to flash Chainfires Root script to get the stock recovery back. From there on I will try to flash the link you gave to me with Odin and hope that will fix it. Do you have any ideas on what I'm doing wrong?
Your version of TWRP works so far. It reboots into RecoveryMode. Now I'll wipe and try to install Temaseks Cm 12 followed by Gapps! Thanks so far!
Okay, it's solved. Can't thank you enough for you help. Bless you!!
No problem. Glad you got it figured out!
[emoji106]
I have a i9000 and i would like to install twrp so i can install a 7.0 rom but i dont know how to install twrp can someone tell me how?
I would also like to know this as well. I've tried CWM through odn but it's a zip so wont flash. I've tried it in stock recovery but obviously get the signature fail msg.
TWRP comes with the kernel and hence the ROM.
It gets automatically installed if you're on older BML/MTD device..
In which case you should have rebooted after acceptign wipe..
Ahh right, so I flash a new kernel to it and that comes with the recovery built in.
Do I flash the kernel from odin or stock recovery. Got the stuff to unbrick the phone if that happens, just wanted to know the right way before flashing stock rom back and starting again.
MrGRiMv2 said:
Ahh right, so I flash a new kernel to it and that comes with the recovery built in.
Do I flash the kernel from odin or stock recovery. Got the stuff to unbrick the phone if that happens, just wanted to know the right way before flashing stock rom back and starting again.
Click to expand...
Click to collapse
The kernel is flashed by the ROM zip... I dont remember if it automatically reboots to recovery or not..
However it does create a file in cache that makes it boot to recovery.. Since the /system is not yet installed.
You should flash the ROM after it boots to new recovery.. then install the zip file again..
All this is described in https://github.com/xc-racer99/android_device_samsung_aries-common/blob/aosp-7.1/updater.sh
I got there in the end.
I flashed CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.tar with odin, then installed cm-10.2.0-galaxysmtd.zip which also updated my older CWM. It had a spam, so I wiped/factory/dalvik etc from the updated CWM and then reinstalled cm-10.2.0-galaxysmtd.zip - now running the rom just fine.
Will be trying out some more over next few days now I have a nandroid of CM10.
Thanks for pointing me in the right direction.