Database Users

INDIA Tab 2 7.0 (GT-P3100) Android 4.1.1 Jelly Bean .

Thanks to sammobile published by FaryaabS
Samsung just leaked their Android 4.1.1 Jelly Bean OTA update for the Samsung Galaxy Tab 2 7.0 (GT-P3100) for India.
This is the very first Android 4.1.1 Jelly Bean TEST OTA Update for the Samsung Galaxy Tab 2 7.0 (GT-P3100).
OTA Firmware Details:
Android Version: 4.1.1 – JRO03C
PDA: P3100DDBLI1
Country: India (INU)
Build Date: September 8, 2012
Size: 295.2MB
OTA updates’ require a specific base firmware on which they can be flashed upon and are flashed through the stock Samsung Recovery.
This P3100DDBLI1 Android 4.1.1 Jelly Bean OTA update requires the user to be on P3100DDBLH3 firmware.
Don’t worry i will guide you through all the steps on how you can apply this OTA update on your Samsung Galaxy Tab2 7.0 (GT-P3100). Make sure you perform a backup of your data before attempting to install this!
Instructions for flashing the OTA Update:
- Make a backup of your data
- Download the Base firmware required by the OTA Update, P3100DDBLH3 - Get it from HERE
- Unzip the file
- Open Odin 3.04 (Download it from HERE)
- Restart the device into download mode (Press Power Button + Volume down)
- Connect phone and wait until you get a yellow/blue sign in Odin
- Add P3100DDBLH3_P3100ODDBLH1_P3100DDLG1_HOME.tar.md5 to PDA
- Make sure re-partition is NOT ticked
- Start flash, sit back and wait a few minutes
- Download the P3100DDBLI1 OTA Update (Download it from HERE)
- Copy the OTA update to your External SD Card
- Restart the device into Recovery Mode (Press Power Button + Volume up)
- Select Apply update from External Storage
- Browse to the OTA update and flash it
- When OTA update is flashed perform “Wipe Data/Factory Restore” (Will format your internal SD Card)
- Reboot your device and Voila.
-FOR ROOTING YOUR TAB SEE HERE

Not to sound a **** but there are a few threads covering this and stock updates go in general not development. This is alrdy rooted and posted. Just helps to keep the forums clean. Again not bashing just informing.

Moved to General.

want CWM root update while jellybean already installed
Archer said:
Moved to General.
Click to expand...
Click to collapse
I already updated my galaxy tab 2 GT-P3100 to jellybean update(leaked and got from XDA-developers.com ) but now I am thinking to update CWM update to this device and want to extend ROM and root the device....
I got a CWM update by Odin and many other options from the net and XDA-developers But That was old and was a CWM update for ICS 4.0.3/4 ...But I already updated it to JellyBean 4.1.1 so I think that old update will not work...
So please anyone help me to do this Update... If anybody have any information about CWM update for root the device Galaxy GT-P3100 and on 4.1.1 JellyBean OS then inform me...
Thank You..

Does CWM and root method on ICS can be done on leak JB 4.1??
Hi, after doing the given steps on upgrading to JB leak, does CWM and root method on ICS can be done also on leak JB 4.1??

Does CWM and root method on ICS can be done on leak JB 4.1??
Sir, a gentle followup on my concern regarding methods of rooting and installing CWM on leaked JB 4.1
We all know that rooting and installing CWM was done using ICS, please advice if those rooitng tools on ICS is still applicable on JB 4.1 leak??

Help P705 Stuck on boot logo - Chainefire3d [SOLVED]

Hi
I install Chainfire 3d on my (LG P705 - JB official update - Rooted)
it stuck on boot logo .
later I 've learned that chainfire 3d works only for gingerbread
i have no adea where to start
Please help me !!

I think i'll try to recover , using LG Mobile Support Tool

tenmini said:
I think i'll try to recover , using LG Mobile Support Tool
Click to expand...
Click to collapse
thanks god it works, and it restor all my apps and sms
1- Download the program from LG site and install it and open it
2- Press and hold (Volume +) + (Power botton) plug your cable Usb to ur phone witch gives you emergency mode
3- Go to options > Upgrade Recovery > fill empty fields with : a- model / and serial number or
b- IMEI
you can find them under battery
I hope it helps
Sorry for my English

tenmini said:
Hi
I install Chainfire 3d on my (LG P705 - JB official update - Rooted)
it stuck on boot logo .
later I 've learned that chainfire 3d works only for gingerbread
i have no adea where to start
Please help me !!
Click to expand...
Click to collapse
Hi sir
I suppose you are from Algeria and I wonder if there is an official JB update for P705.
If really it exists,could you please submit the link?
Thanks

chifou said:
Hi sir
I suppose you are from Algeria and I wonder if there is an official JB update for P705.
If really it exists,could you please submit the link?
Thanks
Click to expand...
Click to collapse
Yes, there is An Official update to JB 4.1.2, you need to use LG support tool
I download it from lg.com, and I followed the steps indicating on the tool

tenmini said:
Yes, there is An Official update to JB 4.1.2, you need to use LG support tool
I download it from lg.com, and I followed the steps indicating on the tool
Click to expand...
Click to collapse
Thanks for the reply
I tried with the lg support tool but I get the message: you have the last version installed on your device
My version of course is ICS 4.0.3 - V10e
just a small question,
For the country have you set it for Algeria?

Software Update V10L available now for LG G3 D855 in India

I just updated my LG G3 D855 to V10l-IND-XX (from V10j) via LG Mobile Support Tool. This update is still not available Over The Air. As usual LG Mobile Support Tool downloaded whole software (KDZ), about 1.19 GB and then updated the phone with it. Fortunately no phone data was lost by the update process (in contrast to what LG Support Tool predicted). After the software download, the actual update process took only a few minutes. As for the change-log of this update - I have not still noticed anything new or changed, only the battery performance seems to improve a bit.
Note - If you are going to update your phone via LG Support Tool then make sure to run it as Administrator in Windows. I did not do it and got the error "Unable to extract software archive, check your PC settings and try again". Frustrated, I had to repeat the whole process again. Also your Windows installation drive must have at least 8-9 GB free space (required for downloading and extracting software files), otherwise Support Tool will give error.

Thanks for the info.. :good:

If any of you need the direct link to the India L FW its mentioned below. I do see a definite change in terms of LAG , its a lot smoother with the L firmware now. @technomedico what model are you on 16 GB or 32 GB ?
<model>LGD855</model>
<suffix>AINDTN</suffix>
<sw_version>D85510L_00</sw_version>
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW912906432109876543213/D85510l_00.kdz

kryptonite said:
If any of you need the direct link to the India L FW its mentioned below. I do see a definite change in terms of LAG , its a lot smoother with the L firmware now. @technomedico what model are you on 16 GB or 32 GB ?
<model>LGD855</model>
<suffix>AINDTN</suffix>
<sw_version>D85510L_00</sw_version>
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW912906432109876543213/D85510l_00.kdz
Click to expand...
Click to collapse
I believe you have downloaded the KDZ u linked above. Why dont you go a step ahead with THIS and avail the new update zips for us.

Just started downloading 174.43MB update.

Sidz4u said:
Thanks for the info.. :good:
Click to expand...
Click to collapse
You are welcome dear.

kryptonite said:
If any of you need the direct link to the India L FW its mentioned below. I do see a definite change in terms of LAG , its a lot smoother with the L firmware now. @technomedico what model are you on 16 GB or 32 GB ?
<model>LGD855</model>
<suffix>AINDTN</suffix>
<sw_version>D85510L_00</sw_version>
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW912906432109876543213/D85510l_00.kdz
Click to expand...
Click to collapse
Thanks for your update dear. As for your question I have 32GB variant of LG G3

What happens when a rooted person takes OTA ?
At the most the update installation will fail right ? There is no possible soft brick.. or is there any ? :/

Sidz4u said:
What happens when a rooted person takes OTA ?
At the most the update installation will fail right ? There is no possible soft brick.. or is there any ? :/
Click to expand...
Click to collapse
The possibilities of a soft brick cannot be ruled out. Especially of you have custom recovery installed as well.

kryptonite said:
The possibilities of a soft brick cannot be ruled out. Especially of you have custom recovery installed as well.
Click to expand...
Click to collapse
Just got softbricked lol
Even restoring the Nandroid Backup is no use.
Preparing to flash KDZ now.

[Q] Lg P714 II V10A firmware (not found anywhere)

Solution on the 3rd post. (Update 03/11/2014)
Hello everyone.. thank you so much for reading me..
To be brief.. I'm looking for the V10a firmware for LG P714 II (The jelly bean one)(from telefonica Guatemala, it's under central america) and I just can't found it.. seems all the links gone dead.. and I have tried all the links on this page (supposedly the lg one) without luck...
Why? Because I updated that thing to the KitKat (but p710) and it's just not as fast as I imagine.. it's faster the jelly bean (at least for me, in my phone)(maybe because it's not a truly update for my model.. and I just want to go back... )
Lg p714 II (LG L7 II)
looking for the jelly bean firmware LG P714(V10a) the 10b,c just doesn't work
thank you
http://lg-phone-firmware.com/index.php?id_mod=21
Keep Smiling.

DogsAngel said:
Hello everyone.. thank you so much for reading me..
To be brief.. I'm looking for the V10a firmware for LG P714 II (The jelly bean one)(from telefonica Guatemala, it's under central america) and I just can't found it.. seems all the links gone dead.. and I have tried all the links on this page (supposedly the lg one) without luck...
Why? Because I updated that thing to the KitKat (but p710) and it's just not as fast as I imagine.. it's faster the jelly bean (at least for me, in my phone)(maybe because it's not a truly update for my model.. and I just want to go back... )
Lg p714 II (LG L7 II)
looking for the jelly bean firmware LG P714(V10a) the 10b,c just doesn't work
thank you
http://lg-phone-firmware.com/index.php?id_mod=21
Keep Smiling.
Click to expand...
Click to collapse
Please post to L2 forum, they can help you much better there.

¡¡ Solution !!
Well after a couple of tries, and days.. I've finally found the solution to restore (even cooler) and downgrade to jellybean from kitkat on LG Optimus (prime)(hahahahaha couldn't resist) P714
The trick is this (at least in my case, or if you're in central america or any Latin country (but you can try any of the firmware you have)(that was the only one that worked for me, and I've tried almost all of them)
Using the LG Flash tool 2014 Flash your phone with the Jelly Bean firmware (not the A20 or something that's kitkat) the A10,B10,C10 etc.. I highly recommend the one from "PANAMA" because that's a clean firmware !!!! ( to be clear, CLEAN firmware) no company attached (Like I said, that was the answer for me !!)
Go here, and grab them before they gone dead.. .
http://lg-phone-firmware.com/index.php?id_mod=21
The one that worked for me was the D10 P714 (From Panama)
Use the LG Flash tool as normal, an on "phone mode" choose DIAG
Let it work it's magic..
I will reboot.. and obvioulsy after a few minutes should have started to sync.. and because we're downgrading, that's just not going to happen.. it will display the "LOGO" forever.. (but because its a clean firmware it will display only the LG logo hehehe)
So, reset the phone using the power and the middle big button.. then keep pressing and also press - "minus" volume when it power up, release the power button... and keep pressing the middle one and vol - eventually the android logo will appear, release the buttons and the factory reset backup will begin..
Enter your language, name... google account (to back up everything) and you're done ! hehehe.. You have your precious Jelly Bean back.
Hope this helps.

Please upload V10D KDZ
DogsAngel said:
¡¡ Solution !!
Using the LG Flash tool 2014 Flash your phone with the Jelly Bean firmware (not the A20 or something that's kitkat) the A10,B10,C10 etc.. I highly recommend the one from "PANAMA" because that's a clean firmware !!!! ( to be clear, CLEAN firmware) no company attached (Like I said, that was the answer for me !!)
Go here, and grab them before they gone dead.. .
http://lg-phone-firmware.com/index.php?id_mod=21
The one that worked for me was the D10 P714 (From Panama)
Use the LG Flash tool as normal, an on "phone mode" choose DIAG...
Hope this helps.
Click to expand...
Click to collapse
Hi. I want to flash a clean stock JellyBean rom to my L7 II too. The file you sugested isn't online anymore, please, would you upload it to Mega or MediaFire?
I hope you reply soon and do me this favor. Thank you in advance.:good:
- Leonardo
Lima, Peru
---------- Post added at 08:05 AM ---------- Previous post was at 07:17 AM ----------
DogsAngel said:
¡¡ Solution !!
Using the LG Flash tool 2014 Flash your phone with the Jelly Bean firmware (not the A20 or something that's kitkat) the A10,B10,C10 etc.. I highly recommend the one from "PANAMA" because that's a clean firmware !!!! ( to be clear, CLEAN firmware) no company attached (Like I said, that was the answer for me !!)
Click to expand...
Click to collapse
Hello mate. Thank you for the instructions, they were very helpful! Just to tell you also that I found another clean KDZ to flash! (Using LG Flashtool 2014, in emergency mode. Really easy!)
It worked for my L7 II P714. Now I have a clean stock JellyBean rom without the silly customizations from the Operator.
This L7 II has a very nice camera!
I got the clean JB KDZ from here:
HTML:
JellyBean V10E_00
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW54TARE02PNAJ2373E0W7A/V10E_00.kdz
It's from Panama, also.
Cheers.
- Leonardo

Glad it worked mate, sorry I couldn't reply sooner. Thanks for posting the link that you found. I formatted my pc, so as for the software, I would have to check my backup hd. (Awesome, from Panama too..)
Keep Smiling.

Yeah. It's a very nice backup device this L7 II
And it's got the most awesome camera found in a cheap smartphone! It's almost as good as my G2's * -*
Cheers.

how to install OTA Lollipop 5.1 for xt1039 and xt1040

this process can brick your phone,you did make under yourself risk
Requeriments files:
*Rom Stock retail BR android 4.4.3 or mirror
*OTA Lollipop 5.1 for Reatil BR Only
Process:
*charge min. batery 50% or can brick us phone
*first install the android 4.4.3 Steps for instalation Rom Stock
*then via ota update to 4.4.4 ( Go to setting, about phone, and update) wait to finish the process
*Now place the file with 5.1 in the download folder and install via recovery or
on recovery select "apply update from adb" and run from cmd or terminal (for linux):
"adb sideload ota (file name from file path or locate file, example C:\adb"ota 5.1")" and wait to finish this time so 15 to 20 minutes.
enjoy new update "Lollipop for peregrine"
thanks for Eddy Rock and the diferents autor threads
on this.
pd.: my english isnot very good looking. excuse me please.

For Root
carlos way said:
root automated
instruction:
*extract zip
*boot on fastboot
*run from cmd or terminal (for linux):
*fastboot boot (CF-Auto-Root-peregrine-peregrineretgb-xt1039.img (from file path or locate file, example C:\adb"file")) without "( )"
Click to expand...
Click to collapse

408 MB ? da fuq
ps :
for those who want to check for updates via official motorla website :
https://motorola-global-portal.custhelp.com/app/standalone/country-selector/software-upgrade

gr3ud said:
408 MB ? da fuq
ps :
for those who want to check for updates via official motorla website :
https://motorola-global-portal.custhelp.com/app/standalone/country-selector/software-upgrade
Click to expand...
Click to collapse
The official only have 408 MB, I Downloaded it in another forum, and works like a charm q.q
PS: I know the guy who posted and captured this OTA and the OP aren't him, stole people's work and claim to yourself is hateful, you should give the credits for him...

SplaszIG said:
The official only have 408 MB, I Downloaded it in another forum, and works like a charm q.q
PS: I know the guy who posted and captured this OTA and the OP aren't him, stole people's work and claim to yourself is hateful, you should give the credits for him...
Click to expand...
Click to collapse
The first UK ota was 408.98mb - but as everything is still in testing people really shouldn't be posting this stuff

gr3ud said:
408 MB ? da fuq
ps :
for those who want to check for updates via official motorla website :
https://motorola-global-portal.custhelp.com/app/standalone/country-selector/software-upgrade
Click to expand...
Click to collapse
Yea, i'll stick with a custom ROM instead of this oficial update (that [email protected]!)
They are so late that i'm sure SaberMod, BlissPop, etc are better optimized.

Has anyone confirmed this to work on the XT1039? I assume it wouldn't be possible due to different LTE bands?
EDIT: Comparing the bands, it seems like there's little to no difference between the XT1040 and the XT1039, I assume like the Falcon, we wouldn't be able to restore to an older firmware via fastboot if we flashed this

Congrats motorola, it's been just 6 damn months.

Pupet_Master said:
Yea, i'll stick with a custom ROM instead of this oficial update (that [email protected]!)
They are so late that i'm sure SaberMod, BlissPop, etc are better optimized.
Click to expand...
Click to collapse
Yeah dude, custom roms FTW, the only reason i bought the moto g...
haha, cant belive i would still sit on kitkat if i would have to wait for the damn update... and then... there a bugs n whatnot for sure and you have to wait another year or two for fixes and in the meantime there is already android M or N released and so on...
nah... custom rom devs = you´re the shiat, please never stop developing for us flashoholic power users

Okay, so I took the risk and tried flashing the XT1040 firmware on my XT1039, I wouldn't do it unless you use your peregrine as a wifi only device

gr3ud said:
Yeah dude, custom roms FTW, the only reason i bought the moto g...
haha, cant belive i would still sit on kitkat if i would have to wait for the damn update... and then... there a bugs n whatnot for sure and you have to wait another year or two for fixes and in the meantime there is already android M or N released and so on...
nah... custom rom devs = you´re the shiat, please never stop developing for us flashoholic power users
Click to expand...
Click to collapse
Yea, motorola took so long to bring it that i'm kind of glad as it made me try custom roms and the work all the teams make on the ROMs is amazing.
Now i'll always support them instead of motorola

Edit: Working for me

anyone update to 5.1?
can you do a twrp backup
i am using xt1042 i think the backup should work for 1042 without flashing baseband

iorikyo645123 said:
anyone update to 5.1?
can you do a twrp backup
i am using xt1042 i think the backup should work for 1042 without flashing baseband
Click to expand...
Click to collapse
Yeah I was thinking the same, but I remember that there are some incompatibilities with the boot loader, but I am not sure.

carlos way said:
For Root
Click to expand...
Click to collapse
Has anyone tried it? Brick or not? A bit insecure here [emoji28] [emoji28]

Hello , i make all steps , but when i flash ota 5.1 with custom recovery i get error , and installation aborted
help please

Hello,
I took a captured OTA of a 5.1 Lollipop ROM and when I launch the update process, I also get an error, it says that the fingerprint is not the version expected. But I have the KXB21.14-L1.56 as mentioned in the error message.
But I have an other question, why flash the 4.4.3 instead of directly the 4.4.4 version of the ROM ?
Thank you.

Hello again,
Yesterday I could update my XT1039 to Lollipop 5.1 via OTA on a fresh install of a 4.4.4 KitKat version. I just had to go in Google Play and to update the Motorola update service.
After the update, I could see that the build number of the update was LPB23.13-17 and the System Version is 23.21.17, different from the 21.11.56 of the captured OTA given here, which gave me the error.
I hope this helps.
Cheers!

Ok

mr.death7 said:
Hello again,
Yesterday I could update my XT1039 to Lollipop 5.1 via OTA on a fresh install of a 4.4.4 KitKat version. I just had to go in Google Play and to update the Motorola update service.
After the update, I could see that the build number of the update was LPB23.13-17 and the System Version is 23.21.17, different from the 21.11.56 of the captured OTA given here, which gave me the error.
I hope this helps.
Cheers!
Click to expand...
Click to collapse
Which KitKat have you installed? I tried doing the same (using Br retail) but didn't worked, it says there is not update.