Related
I unlocked the bootloader and flashed a custom recovery. I then rebooted the device. Now it is stuck at the bootloader (white Google logo on black background) and I can't get it to do anything else. I've rebooted it a bunch of times including with the vol + and vol - buttons held down to no avail. I've also let the battery run out and then tried to boot it up again and the same thing happens. adb nor fastboot see the device and it doesn't show up in the logs on my machine (Mint 13) as coming online at any time.
Most of the times I reboot it with the power switch it reboots to the Google logo even without me letting go of the power button. Sometimes I can get it to fully power off but I haven't figured out what combination of vol keys and reboot does that.
Anyone have any ideas what could be wrong? Any help would be much appreciated!
You are not bricked if you can still get into the bootloader.
Download the factory image from here, and flash it with fastboot. If you don't know how to do that, read this thread.
I wish I could get fastboot to see it then I could definitively flash that img.
I can't get into the bootloader and can't get fastboot or adb to see it. It's stuck at the Google logo now and when i hold the power key it reboots back to the Google logo with the unlock logo at the bottom.
Thanks for the help
You've tried holding volume down+power for 10+ seconds? That should power off the device, then hold both vol up+down down and power up
Ya I've tried to hold vol + and power for 10+ seconds and it reboots back to the Google logo even if I don't off the power key. Same happens with all the other combinations of keys being held with the power button. I can't get it to turn off now unless I let the battery die
Press and hold power till screen goes black. Then quickly press power+volume down and HOLD.
Sent from my Nexus 7
Tried that and still stuck at the Google logo. I have to go to work for a couple hours and then will hack on it when I'm back. Hope I don't have to deal with Googles rma process seeing how disorganized the rest of that company is
Sent from my HTC one s
No luck with any button combos but the vol + and power actually turned it off. All out of ideas over here. I'm thinking it really is bricked
I'm in the same spot. I can get it into recovery occasionally but once there it locks up after trying to flash or clear the cache.
I'm wondering if a contributing issue is CMR v6.0.0.6? I updated it from 6.0.0.4 that was running fine. But no fastboot or adb so that is doubtful.
This is frustrating and not a great start with this N7.
thank you
giveen said:
Press and hold power till screen goes black. Then quickly press power+volume down and HOLD.
Sent from my Nexus 7
Click to expand...
Click to collapse
this worked. you have to be fast. as soon as screen goes black release power button then quickly, very quickly repress along with vol up and down.
You will still be able to get into the bootloader! Force kill the tablet by holding the power button for ages. Then hold volume up and volume down and the power button together, which will boot to fastboot.
It looks like a CWM bug as I feared. Anyone in the same boat try here - http://forum.xda-developers.com/showthread.php?t=1782932
Nothing has worked and I've literally tried everything that those three buttons can do. Thanks again for all the help guys. Had a great time trying to resurrect it but guess it's time for it to go back home
Just as I suspected. Google puts out buggy junk once again.
I just wanted to report a similarly event. I have a rooted, unlocked Nexus 7, with TWRP recovery. I have previously rebooted without issue. Tonight I booted into bootloader mode to check something and the hit power button to choose start. I got stuck on the boot logo. After finding this thread, I started with the simplest combination and held power button until screen went dark, then added volume down and once again in bootloader. This time choosing start led to a regular system boot. It's as if the device froze and needed a hard reboot.
Sent from my SCH-I535 using Tapatalk 2
I was attempting to boot into recovery and kept getting the 'Google' logo (I am unlocked/rooted with twrp recovery). I wasn't aware that one had to be plugged in via usb in order to *not* hang....
Any way around this?
Once I plugged it in and attempted to boot into recovery it worked fine.
I had a similar issue after using the Nexus Root Toolkit to flash to nakasi 4.2 with CWM recovery - just got stuck on the nexus boot screen, flashing in a loop for over 15 minutes.
I ended up powering down the device, holding power for about 5-10 seconds - then QUICKLY holding both the power and volume up+down keys, it then went into the fastboot screen.
After it was there, plugged it into my PC.
Now, this should work for you - assuming you have all the fastboot/usb driver stuff installed.
I extracted the contents of nakasi-jop40c-factory-6aabb391.tgz into the same directory as the fastboot.exe provided by WugFresh with his Nexus Root Toolkit (google search or xda search for this if you dont have it, i dont think i can post links due to my low postcount) - typical filepath: C:\Program Files (x86)\WugFresh Development\data
By the files in there, I mean drilling down inside the tgz to where the image files were inside so that files like bootloader-grouper-4.13.img, image-nakasi-jop40c.zip etc were extracted into the directory and sitting alongside the fastboot.exe - NOT in a subfolder.
Once its all here, running flash-all.bat (this is provided by google in the nakasi-jop40c-factory-6aabb391.tgz) from the command line or by double clicking on it from explorer should kick off the process. After about 2-3 minutes, it was complete, and my Nexus then booted up within about 3 minutes after that.
Also worth noting, device remained unlocked, but I lost root/root binary
Right... I spent the last 6 hours reading through the forum and Googling about this problem. I learnt a lot (!), but cannot solve the problem, and I now hope someone can help me
Sorry for the lenghty post, but there's a lot of information to share...
Yesterday, my long-awaited Nexus 7 (8Gb) finally arrived. It worked just fine for an hour or so: I got online without any issue, Calendar, Photos, GMail and Contacts were nicely synching and I was really starting to get impressed about the speed and features.
I did download a couple apps, more specifically Aldiko & Moon+ Reader ebook reader apps, and Facebook).
Suddenly --I believe I just started the Facebook app-- the screen turned black and showed strange stripes. The device rebooted and got stuck on the black screen with the white "Google" text. I let it sit there for a while and then instinctively tried to power-off the device by holding the power button for 10 seconds or so. It did indeed reboot, but when the tablet booted up, it popped back to the black Google screen and just sat there.
FYI: The USB cable was connected all of the time, and the first time I plugged the Nexus in, my Win 7 64bit machine recognized the tablet and loaded the drivers for it.
When it got stuck, I decided to continue charging it, thinking that maybe the battery wasn't fully charged and the cause of the problem. I hooked it up to the official charger in a wall socket and let it sit there for a while, while I started searching the web for a solution. After about 30 minutes, when I had read about the power+volume button combination, I tried this combination (until then the Google page showed for more than 30 minutes). The Nexus indeed showed the Fastboot screen, and I had to plug it back in the PC's USB to get the buttons "start", "recovery mode", "power off" and "restart bootloader" working. None of them had any effect.
The fastboot screen showed the product name "grouper", the lock state as "locked"; the bootloader as version 3.34 and the HW version as ER3.
I downloaded the "Nexus root toolkit" from WugFresh and tried to flash it back to "stock" with Android 4.1.1 JRO03D. The tool did show my serial number, btw.... Until then, I had good hopes, but then it went wrong: the tool downloaded the files, unpacked them and said something about "wiping flash" and everything froze. After about 20 minutes, I concluded it had locked-up and unplugged the device.
It now seems to be completely "bricked"...
I can no longer get to the fastboot screen; Not even with the 3-button trick... it always shows the Google screen and immediately shows the "dead robot" screen with the exclamation mark.
The Nexus does not start up Android, so I cannot activate ADB/ USB debugging...
The device is no longer recognized by my PC; the PC doesn't make the "USB hooked up/disconnected" sound anymore
I tried uninstalling the drivers and installed the "naked drivers", no solution -- they show up with yellow exclamation marks
I installed the SDK, and "fastboot.exe devices" shows nothing
I downloaded the "Nexus 7 Toolkit 2.0"; I cannot access the tablet, no serials show, drivers cannot be installed
FYI: I did not try to root it or unlock it. I rebooted my PC, I power-cycled the Nexus, I changed USB ports, sigh...
I'm afraid I actually bricked my device... If so indeed, and given the fact that I cannot access the device with any of the tools/toolkits, is there anything I can do to put it back to factory settings?
Someone else may chime in with some help, but I think using the toolkit screwed you. Had you just used fastboot while you had the bootloader up you could have reflashed the stock rom yourself using the file from here and these commands.. but since you can't get into the bootloader now I think its hosed, but I could be wrong though.
I just noticed that when I press the power + volume up button, my PC detects it as an "Asus Transformer Prime APX Interface"?
Would this be another "way in"? (found something about NVflash on Google?)
Here are two threads on the topic, however I don't think they restore it that way since mostly its done thru the bootloader
http://forum.xda-developers.com/showthread.php?t=1879228
http://forum.xda-developers.com/showthread.php?t=1882753
and people still continue to use toolkits because its easier. in reality its just easier to mess upon your device. reading through the forums i have yet to see someone that messed up their device with fastboot oem unlock amd fastboot flash recovery recovery.img.
To be honest; I feel the toolkits are great for people that know what they're doing and understand the process and are just looking for a quick way to do it.
People that are new to the rooting scene and don't understand the process are the people that SHOULDN'T be using these toolkits. They need to learn about the process and do it a few times manually before even attempting the toolkits.
OK guys, I got the message and yep, shouldn't have used the toolkit. **guilty** :cyclops:
But what advise do you guys have? Would the APX/NVFlash path make sense?
Or can you advise how to get support from Google/Asus in Belgium (bought tablet in Staples US )
thanks!
Considering it doesn't seem anyone has used NVFlash to restore it looks like you are going to have to return/exchange/RMA whatever option is available to you, unless its figured out
i see you pressing volume up and down and power button to get into the bootloader.. but thats wrong. its power button + volume down to get into the bootloader(maybe thatll make a difference for you). but yea, chances are that youll need to go for an exchange/repair.
Nvflash should work though. I haven't used it since.my last tablet and.unfortunately I forget how to use it. I don't think zip files can be used. I think someone could help him that knows how to set up a folder of files for nvflash.
simms22 said:
i see you pressing volume up and down and power button to get into the bootloader.. but thats wrong. its power button + volume down to get into the bootloader(maybe thatll make a difference for you). but yea, chances are that youll need to go for an exchange/repair.
Click to expand...
Click to collapse
hi, the combination did the job before, but just to be sure, I have tried them all:
power + vol up + vol down: black Google screen, followed by the dead robot with exclamation mark sign...
power + vol down: black Google screen, followed by the dead robot with exclamation mark sign...
power + vol up: Goes into APX mode (and PC chimes)
bigooze said:
hi, the combination did the job before, but just to be sure, I have tried them all:
power + vol up + vol down: black Google screen, followed by the dead robot with exclamation mark sign...
power + vol down: black Google screen, followed by the dead robot with exclamation mark sign...
power + vol up: Goes into APX mode (and PC chimes)
Click to expand...
Click to collapse
robot with an exclamation is the stock recovery. it wants to be flashed with the stock google image https://developers.google.com/android/nexus/images#nakasi
simms22 said:
robot with an exclamation is the stock recovery. it wants to be flashed with the stock google .img
Click to expand...
Click to collapse
Hmm... And how would one do this? What tool should be used?
bigooze said:
Hmm... And how would one do this? What tool should be used?
Click to expand...
Click to collapse
read the page and links provided there, the instructions are there.
simms22 said:
read the page and links provided there, the instructions are there.
Click to expand...
Click to collapse
Dont think you can flash those files thru recovery, I already posted that link for him unfortunately without the bootloader I think hes hosed
In order to use these files, you need to have the fastboot tool in your PATH. That tool is compiled as part of every configuration of the Android Open-Source Project and is the tool used to flash custom builds on your device. On GNU/Linux systems, this also implies that you have configured USB access as mentioned in the machine setup instructions.
Your device needs to be in fastboot mode, with the bootloader unlocked. The relevant key combinations and commands are documented on the page about building for devices.
Click to expand...
Click to collapse
When the android with the red mark comes up, press power+vol up, does the recovery come up?
simms22 said:
read the page and links provided there, the instructions are there.
Click to expand...
Click to collapse
Oops... getting late here -- didn't notice the link...
Anyway, the instructions indicate the use of the fastboot tool, which do not work :crying:
I went to factory reset my completely stock and never rooted Nexus 10. It rebooted in to recovery and started "Erasing". It did this for a few hours. If I power it down, it will power back up and go right back to "Erasing" and never erase. If I hold power and volume up on this Erasing screen, I can see "Erasing /data", but it never shows any other status. I cannot boot in to recovery, it will only go to the Erasing screen - I never get the recovery menu. I can boot in to fastboot, but I cannot get the fastboot cli program to recognize the device. I've tried installing drivers for it multiple ways with no success. I figure if I can get in to fastboot I should be able to fix this device, but I'm stuck. Can anyone help?
No one can help here?
ganiman said:
I went to factory reset my completely stock and never rooted Nexus 10. It rebooted in to recovery and started "Erasing". It did this for a few hours. If I power it down, it will power back up and go right back to "Erasing" and never erase. If I hold power and volume up on this Erasing screen, I can see "Erasing /data", but it never shows any other status. I cannot boot in to recovery, it will only go to the Erasing screen - I never get the recovery menu. I can boot in to fastboot, but I cannot get the fastboot cli program to recognize the device. I've tried installing drivers for it multiple ways with no success. I figure if I can get in to fastboot I should be able to fix this device, but I'm stuck. Can anyone help?
Click to expand...
Click to collapse
I know the Nexus 10 takes longer to do stuff like that than other devices but I have never had it stuck on erasing for hours. If you hold down the power button long enough, will it reboot? If you can time it right, you should be able to hold the Power + Volume up + Volume down and hopefully get into the recovery. I think it has to be all three buttons. Not just Volume up. At least that takes me to the bootloader screen.
jsgraphicart said:
I know the Nexus 10 takes longer to do stuff like that than other devices but I have never had it stuck on erasing for hours. If you hold down the power button long enough, will it reboot? If you can time it right, you should be able to hold the Power + Volume up + Volume down and hopefully get into the recovery. I think it has to be all three buttons. Not just Volume up. At least that takes me to the bootloader screen.
Click to expand...
Click to collapse
If I hold in power, it will reboot. It does not stay powered down. And when it comes up, it goes right in to "Erasing" again. I thought volume down as Fastboot and Up was Recovery (or maybe the other way around). I will try holding in both volume up/down at the same time instead. I might have tried it in my rage when this happened, but can't remember, so will try it for sure when I charge it back up again (it eventually stops because the battery just dies).
ganiman said:
If I hold in power, it will reboot. It does not stay powered down. And when it comes up, it goes right in to "Erasing" again. I thought volume down as Fastboot and Up was Recovery (or maybe the other way around). I will try holding in both volume up/down at the same time instead. I might have tried it in my rage when this happened, but can't remember, so will try it for sure when I charge it back up again (it eventually stops because the battery just dies).
Click to expand...
Click to collapse
I've always held all three buttons with my Nexus devices and it takes me to the bootloader. You could be right about volume down being Fastboot and Up being Recovery but I'm not 100% sure. There should be a way of getting out of that though. If you just did a factory reset, I don't think it would have messed with recovery or anything.
jsgraphicart said:
I've always held all three buttons with my Nexus devices and it takes me to the bootloader. You could be right about volume down being Fastboot and Up being Recovery but I'm not 100% sure. There should be a way of getting out of that though. If you just did a factory reset, I don't think it would have messed with recovery or anything.
Click to expand...
Click to collapse
From https://source.android.com/source/running.html#booting-into-fastboot-mode
Booting into fastboot mode
During a cold boot, the following key combinations can be used to boot into fastboot mode, which is a mode in the bootloader that can be used to flash the devices:
manta Press and hold both Volume Up and Volume Down, then press and hold Power
Hopefully, this thread is still followed....
So, about 6mos ago, my Nexus 10 stopped working and I couldn't get it back working...eventually moved onto a new tablet, which now I hate....
Anyway, I figured I'd head back to my N10 because I loved it. However, one of the reasons I left it was because it was stuck in bootloop and I was pretty sure it was bricked.
The bad news, I have followed MANY, if not ALL, of the suggestions on getting it back, I just cannot get it to boot. The good news, fastboot connects with the tablet. So, some specifics:
The tablet WILL boot into fastboot and I can send commands and the tablet is unlocked (also, I believe someone said they had issues because they had an older version of ADB and Fastboot. I'm pretty sure I downloaded the 'most current' version 1.4.3). So, with that, I was able to do the fastboot erase functions, such as cache, userdata, system, etc... and then also load the bootloader (mantafm01) and also send the stock .zip file (image-mantaray-....) and the tablet appears to load everything fine. Thumbs up, right? However, when it reboots it stops at the 'erasing' android bot and will not pass that. I left the tablet in that state for a few minutes all the way up to 3 days...no success.
I also tried the above using Wugfresh only to have the same thing occur. So, basically, I am stuck at 'erasing' and I don't know what to do. I feel confident that the tablet has the ability to be brought back to life, I just cannot figure out how/why all of the attempts lead to the same issue.
What I can also tell you is that while fastboot 'sees' the tablet, the tablet does not appear as a device in "My Computer" like it normally did when connecting via USB. I am using the original USB cable and have tried on multiple computers, all to no avail. I've downloaded/installed the drivers, as instructed on many links. Also, while I can get to the 'Recovery Mode' by pressing Power, Volume Up, Volume Down, if I choose "Recovery Mode" on the tablet, it reboots and goes to the 'erasing' screen. I have tried flashing TWRP on the tablet using fastboot as well. And, sometimes, not all the time, the TWRP blue/black screen appears but it will not progress past that screen (i.e., it doesn't go into recovery).
So, if you can, please help. I believe I have followed all of the instructions, but I have to be missing something or not following something correctly. I'm stoked that it looks like it's only soft-bricked, I just can't get it un-bricked.
Thanks in advance!
Hello, I have a problem with my storm. Two days ago I received it and flashed the then latest cm13 and its corresponding recovery. Everything seemed to work just fine until yesterday when there appeared to be an ota update. After the download finished, the phone rebooted itself and is since then stuck with a black flickering screen. Every attempt to start the phone using recovery or bootloader seems to fail, as the phone keeps showing me the black flickering screen, no matter the combination of keys (vol+/vol-) I use to turn it on. If during the black screen I plug the phone to the computer adb can actually see the phone but says it's not authorized to perform any command. On the other hand fastboot won't even see the device.
Is there anything else I can try before sending it back to wileyfox?
Thank you in advance
I've made some progress, I found out that the device can be forced to Qualcomm HS-USB QDLoader 9008 mode by turning it off and then connecting it to usb while holding vol+ and vol-.
I've also found the stock firmware at https://cyngn.com/support.
Now it would be great if somebody could help me, and the others in my situation, to figure the wole QFIL unbricking out, because I'm overwhelmed, and can't seem to find the right info on google.
Thanks to anyone who'll care to help, or share some info
I had a similar issue so have created a thread with stock recovery instructions, which resolved the issue for me.
http://forum.xda-developers.com/wileyfox-storm/help/how-to-flash-stock-images-brick-recovery-t3319617
I hope this helps.
miSAKe said:
I had a similar issue so have created a thread with stock recovery instructions, which resolved the issue for me.
http://forum.xda-developers.com/wileyfox-storm/help/how-to-flash-stock-images-brick-recovery-t3319617
I hope this helps.
Click to expand...
Click to collapse
Thank you for your reply.
Unfortunately this does not seem to be applicable to my case because on my device fastboot mode doesn't seem to work.
I've spent an entire afternoon trying to get it to boot to fastboot mode using different vol keys combinations and timings, but none of them seemed to work. No matter the combination, it just kept booting to a black screen flickering.
I'm starting to think that it could be some problem unrelated to my actions because if, as I think it is, recovery mode and fastboot mode are two separated things, nothing I did would justify this kind of behaviour.
maxxie00 said:
Thank you for your reply.
Unfortunately this does not seem to be applicable to my case because on my device fastboot mode doesn't seem to work.
I've spent an entire afternoon trying to get it to boot to fastboot mode using different vol keys combinations and timings, but none of them seemed to work. No matter the combination, it just kept booting to a black screen flickering.
I'm starting to think that it could be some problem unrelated to my actions because if, as I think it is, recovery mode and fastboot mode are two separated things, nothing I did would justify this kind of behaviour.
Click to expand...
Click to collapse
Sorry to hear you are still having trouble, it does sound like the same issue, was a CM13 update from the last couple of days, upon reboot I saw the wileyfox logo but when the Cyanogen logo would normally show during boot it displayed a black screen, which would flicker every few seconds. Holding vol- and power to reboot resulted in the same thing so I was unable use recovery.
When the display was black and connected via USB I was able to see the device using ADB but like you no commands were authorised.
Leaving the phone plugged in via USB and holding down vol+ and power until it rebooted I was able to enter fastboot, once the fastboot prompt was displayed on the screen I attempted using fastboot to boot from a custom recovery, unfortunately that just resulted in the same blank screen for me. I also tried booting the stock recovery with the same result, I admit I did not try many older CM recoveries, but I wanted to revert to CM12.1 anyway, as the accelerometer and gyroscope not working in CM13 at the moment is no good for me.
Only thing that worked was a stock restore, so I think something beyond the recovery got broken as you could not even boot a previously working recovery.
For the sake of sanity it may be work getting someone else try booting it into fastboot before resorting to Wileyfox support. Though your phone is really new so could claim a refund or replacement from the seller, that would probably be faster.
FYI if you do end up sending it to Wileyfox support they do flash it back to stock, I had a broken screen replaced, was repaired and back to me in just under 2 weeks.
What would be exactly the timing for it to boot to fastboot mode?
Because I just tried (again...) to plug it to the computer while powered off, then it powered on on its own.
After that I rebooted it by holding together power and vol+ and immediately after it rebooted (right after the vibration) I let the power button go and kept holding the vol+ until the black screen appeared again... no fastboot
maxxie00 said:
What would be exactly the timing for it to boot to fastboot mode?
Because I just tried (again...) to plug it to the computer while powered off, then it powered on on its own.
After that I rebooted it by holding together power and vol+ and immediately after it rebooted (right after the vibration) I let the power button go and kept holding the vol+ until the black screen appeared again... no fastboot
Click to expand...
Click to collapse
Hi,
Just tried a few combinations to check timings for you.
Powered off, not plugged in, holding vol+ while plugging in phone end of usb connected to computer, keep holding vol+ -> boots straight to fastboot.
Powered on, already connected to computer via usb, holding vol+ and power, release power when vibrates to indicate reboot but keep holding vol+ -> boots straight to fastboot.
Are you seeing the black and white Wileyfox logo when first booting? When going to fastboot it should skip that. If you are not seeing the logo it might not show the fastboot screen either. You can try following the steps above and then issuing fastboot devices from a command/shell session to see if you are in fastboot mode.
I hope that is of some help.
Thank you but I can confirm that neither of these combinations work for me. When rebooted/powered the device shows the wileyfox's logo.
If I use your first method it just seems to freeze on the wileyfox's logo screen, and the computer won't even see it (it's not listed on the usb devices list) so fastboot's not an option.
If I use your second method, or any other I tried, it shows me the wileyfox's logo and then proceeds to the black screen, which can be seen just by adb (not fastboot) but I'm not authorized to perform any action like you described for your issue.
I'm out of ideas so I'm sending it back and getting it replaced. On the cyanogenmod irc they told me that to brick it like that it cannot be done just by accident but it should require a lot of deliberate effort, and that just installing cm13 + recovery doesn't justify this problem nor does an OTA update, so it's probably some other (hardware?) issue with a very bad timing.
I'm kind of sure it's not the vol+ button that's damaged, because if I leave the device powered off and then proceed to plug the USB while holding together vol+ and vol- it powers on, but the screen stays off meaning the Qualcomm HS-USB QDLoader 9008 mode has been triggered.
Anyway thank you for your help, I could rule out my inability to start the fastboot mode and blame it on the phone xD
Hope I'll be luckier with the next one...
maxxie00 said:
Thank you but I can confirm that neither of these combinations work for me. When rebooted/powered the device shows the wileyfox's logo.
If I use your first method it just seems to freeze on the wileyfox's logo screen, and the computer won't even see it (it's not listed on the usb devices list) so fastboot's not an option.
If I use your second method, or any other I tried, it shows me the wileyfox's logo and then proceeds to the black screen, which can be seen just by adb (not fastboot) but I'm not authorized to perform any action like you described for your issue.
I'm out of ideas so I'm sending it back and getting it replaced. On the cyanogenmod irc they told me that to brick it like that it cannot be done just by accident but it should require a lot of deliberate effort, and that just installing cm13 + recovery doesn't justify this problem nor does an OTA update, so it's probably some other (hardware?) issue with a very bad timing.
I'm kind of sure it's not the vol+ button that's damaged, because if I leave the device powered off and then proceed to plug the USB while holding together vol+ and vol- it powers on, but the screen stays off meaning the Qualcomm HS-USB QDLoader 9008 mode has been triggered.
Anyway thank you for your help, I could rule out my inability to start the fastboot mode and blame it on the phone xD
Hope I'll be luckier with the next one...
Click to expand...
Click to collapse
No problem, I hope you have more luck with the replacement.
Here I am again, new device, still can't boot to fastboot mode (this time I didn't flash anything, just unlocked bootloader so it's not bricked).
"adb reboot-bootloader" works, advanced reboot menu works, yet the vol+ combination hangs on the vendor's logo.
I'm contacting cyanogen os people to try to understand what might be the issue...
Could you please confirm that your device boots into fastboot mode when using the vol+ way? thank you
maxxie00 said:
Here I am again, new device, still can't boot to fastboot mode (this time I didn't flash anything, just unlocked bootloader so it's not bricked).
"adb reboot-bootloader" works, advanced reboot menu works, yet the vol+ combination hangs on the vendor's logo.
I'm contacting cyanogen os people to try to understand what might be the issue...
Could you please confirm that your device boots into fastboot mode when using the vol+ way? thank you
Click to expand...
Click to collapse
Hello again,
So these 5 methods work for me, someone else may have other experiences:
Phone powered off, hold vol+ while connecting USB, other end of USB already plugged into PC, continue holding vol+ until booted to fastboot (almost instant).
Phone powered on, already connected to USB, other end of USB already plugged into PC, hold vol+ and power until reboot vibrate, continue holding vol+ until booted to fastboot (almost instant).
Phone powered on and in OS, already connected to USB, other end of USB already plugged into PC, debug enabled, from ADB console, adb reboot fastboot or adb reboot bootloader
Phone powered on and in OS, advanced reboot options turned on, hold power, select reboot, select bootloader, reboot
Phone powered on and in Recovery, select reboot to bootloader
Currently I am running stock everything.
Perhaps try different USB cables or ports, though I still get to fastboot without the USB cable plugged in.
My Storm was a pre-order so is one of the first releases, it is possible they have changed something since.
Edit: I have come across a thread on the Cyanogen forums which implies this may be related to encrypting your device: http://forum.cyanogenmod.org/topic/117661-bootloader-hangs/ - I see you have been there already
as reference mine is not encrypted at the moment
Hello everybody,
I hope somebody can help me to save my N7 (2012).
I installed TWRP without problems and after that I tried to flash a custom rom - which, for some reasons, didn't work.
After reboot my Nexus is stuck at Google logo with an opened lock at bottom...
I can't get to fastboot because when I power on while pushing VOL - button it just get stuck at the same logo screen.
If I keep power button pressed for about 10s, it shuts down but after a few seconds it boots again just to get stuck again at the logo screen...
The only way to shut it down completely is to keep VOL+ button pressed while pressing the power button.
My Windows 7 computer won't recognize the N7 at all anymore, but when I shut it down completely (Power & VOL+), windows says "Unknown device".
Is my Nexus still to be saved or I can throw it away?
Thank you in advance for each advice.
Conrad
Conrad-007 said:
Hello everybody,
I hope somebody can help me to save my N7 (2012).
I installed TWRP without problems and after that I tried to flash a custom rom - which, for some reasons, didn't work.
After reboot my Nexus is stuck at Google logo with an opened lock at bottom...
I can't get to fastboot because when I power on while pushing VOL - button it just get stuck at the same logo screen.
If I keep power button pressed for about 10s, it shuts down but after a few seconds it boots again just to get stuck again at the logo screen...
The only way to shut it down completely is to keep VOL+ button pressed while pressing the power button.
My Windows 7 computer won't recognize the N7 at all anymore, but when I shut it down completely (Power & VOL+), windows says "Unknown device".
Is my Nexus still to be saved or I can throw it away?
Thank you in advance for each advice.
Conrad
Click to expand...
Click to collapse
Hi, Conrad-007...
This is very strange - your Nexus 7 is clearly 'bootable' (sort of), with a functioning bootloader, ie., it's not hardbricked... or you wouldn't be seeing the Google logo.
In the distant past, back when I used to experiment with custom kernels on my Nexus 7, it sometimes required the POWER BUTTON+VOL DOWN buttons be pressed and held down for a good 30 seconds or more, to generate the necessary 'interrupt', and force the device into the bootloader.
My first instinct, is to suggest you may possibly have a problem with your VOL DOWN button, and maybe it's stuck somehow or not making contact.
It also occurred to me, that you might be able to access the bootloader with...
Code:
adb reboot bootloader
...or possibly...
Code:
adb reboot fastboot
...and even...
Code:
adb reboot recovery
But unfortunately, I'm pretty sure you need to be running fully booted Android or booted into a custom recovery (eg., TWRP) before you can issue ADB commands. I haven't tinkered around in this area of Android for a couple of years now, so my memory of the specifics is a little hazy.
Anyhow, here's a fairly comprehensive listing of Nexus 7 button presses/interrupts, which maybe of some use...
https://forum.xda-developers.com/showthread.php?p=37606945#post37606945
--------------------------------
Anyway, just some thoughts that might give you some clues/ideas, that may resolve your problem.
Good luck, and I hope you find something that works.
Rgrds,
Ged.
Thanks Ged for the detailed answer.
Unfortunately it seems that my Nexus is not booting complete (not finishing the booting sequence due to corrupted bootloader?) and so I cannot send to it any adb or fastboot command...
I read in the meantime that holding the VOL up button while powering up the Nexus, it will bring it in the APX mode (whatever this mean) and indeed, my computer recognize it as "APX" device.
I hope at least that this is a good sign and a first step to bring my Nexus back to life... but I have no idea what is the APX mode and what can I do in this mode to attempt to save my device...
Do you (or somebody else) have (has) an advice or tutorial for me concerning this?
Regards,
Conrad
Hi Conrad.
I'm in exactly the same situation (I've mistakenly posted a duplicate thread here https://forum.xda-developers.com/nexus-7/general/bricked-tilapia-t4005149). Let's continue here. So:
1. I spent 4 hours trying all possible button press combinations, including VERY long presses. I didn't notice any APX device or Uknown device connected to Windows. I might have missed it, you gave me hope. I will check again.
2. APX mode enables low level access to the chipset via nVidia tool nvflash. You probably came accross these threads here on xda:
https://forum.xda-developers.com/nexus-7/general/tutorial-how-to-unbrick-nexus-7-using-t3342364
https://forum.xda-developers.com/showthread.php?t=2564615
https://forum.xda-developers.com/showthread.php?t=2455927
https://forum.xda-developers.com/showthread.php?t=2340237
I haven't so far, as I was not aware of the visibilty of the tablet in Windows. I will check again.
Well, I must have been blind not to have seen all the posts here on xda and everywhere else. I went through the threads and now I know:
1. I can see the tablet in APX mode in Windows. Possibly I could correctly set up the driver.
2. This would be totally useless, since I hadn't backed up necessary blob.
I have a new paperweight