My phones' Info:
Device name: GALAXY y (GT-S5360)
Android Version: 4.1.1
Baseband version: S5360DXKK2
Kernel Version: 2.6.35.7 Merruk [email protected]
Build number: JELLYBLASTV-3.0.3 by Avijit
whenever i connect my phone to my computer my battery saver icon disappears. Can you help me how to fix it?
First of all, change the rom. Its a banned rom and the xda community can't help for that rom.
Secondly it's not 4.1.1. Out SGY is struggling to get 4.0 to run properly how could you gets JB.
Moral: Change rom. There are many good ones out there in the development section. Have fun
Related
Hello,
recently i have rooted my acer Liquid,
but now i cannot change the roms ,
i receive a message that the signature is not found.
These are my specs of the phone.
Firmeware version : 2.1
Small Band: A1-03.05.02
Kernel Version: 2.6.29
Build nr: Acer_LiquidE_0.004.01_EMEA_GEN1
i would like to return my phone to it's original factory settings and rom.
Can anyone help me?
http://theunlockr.com/category/howto/android_how_tos/acer-liquid-how-tos/
Video guidance of how to unroot your Liquid. (Worked for me)
Hi
I have defy+ (MB526) Red lens.
I upgraded from stock ROM Android 2.3.6 to CM9 (4.0.4) Jordan nightly 13.6.2012.
New android works great but it has one HUGE annoying bug - battery wont charge more than 4.15V and it used to be 4.35V.
I was reading and I know it bugs exists for many people and there is no solution I tried 2 different battery patches and it didnt work.
So now I want to go back to CWM backup that I did on official ROM (nand backup). But I heard it could be a problem because now i got newer kernel?!
Those are the details I have now:
CM9 Nightly jordan 13.6.2012 Android 4.0.4:
Baseband version:
EPU93_U_00.59.01
Kernel version:
2.6.32.9-gbdd614e
[email protected] #1
----------------------------
And this was my stock Android before upgrade to CM9:
Stock Android 2.3.6:
Baseband version:
EPU93_U_00.60.03
Kernel version:
2.6.32.9-ge281b6e
[email protected] #1
Build:
4.5.1-134_DFP-231
----------------------------
So my question is can I use nand recovery to go back to my stock android backup that i have. (full system backup)?
Thanx
Download the SBF file and flash it with RSD lite
Are you sure I cant restore NAND backup? As far as I can see, both versions use same GB kernel 2.6.32.9-xxxxx
Thanx
drug-tito said:
Are you sure I cant restore NAND backup? As far as I can see, both versions use same GB kernel 2.6.32.9-xxxxx
Thanx
Click to expand...
Click to collapse
if you did a NAND backup befor flash, restore it!
Hey everyone, so I have a stock Huawei U8800Pro. It is very laggy, and i don't know what to do, because from the specifications i can see that it shouldn't be so laggy. I know there are many threads like this, but i searched the forum and couldn't find any right answers.. So, the basic question is - what should i get from stock, that it wouldn't lag anymore? Thanks in advance!
Specifications:
Model: U8800PV100R001C00B026
Baseband - 203026
Kernel - 2.6.32.9
Version: 2.2.2
do i have to flash stock ROM before installing/updating another ROM?
Device name: GALAXY y (GT-S5360)
Android Version: 4.1.1
Baseband version: S5360DXKK2
Kernel Version: 2.6.35.7 Merruk [email protected]
Build number: JELLYBLASTV-3.0.3 by Avijit
i have searched that there is a 4.2 JellyNoid Jelly Bean custom ROM and i want to install it. But i wonder if i need to flash stock rom and kernel. Can you help me pls...
edward143 said:
do i have to flash stock ROM before installing/updating another ROM?
Device name: GALAXY y (GT-S5360)
Android Version: 4.1.1
Baseband version: S5360DXKK2
Kernel Version: 2.6.35.7 Merruk [email protected]
Build number: JELLYBLASTV-3.0.3 by Avijit
i have searched that there is a 4.2 JellyNoid Jelly Bean custom ROM and i want to install it. But i wonder if i need to flash stock rom and kernel. Can you help me pls...
Click to expand...
Click to collapse
you dont need to go back to stock, but it would be better if u have the same baseband with the custom roms baseband!
BTW do Not SPAM!!!
ronnieryan said:
you dont need to go back to stock, but it would be better if u have the same baseband with the custom roms baseband!
BTW do Not SPAM!!!
Click to expand...
Click to collapse
ok thank you!!
edward143 said:
do i have to flash stock ROM before installing/updating another ROM?
Device name: GALAXY y (GT-S5360)
Android Version: 4.1.1
Baseband version: S5360DXKK2
Kernel Version: 2.6.35.7 Merruk [email protected]
Build number: JELLYBLASTV-3.0.3 by Avijit
i have searched that there is a 4.2 JellyNoid Jelly Bean custom ROM and i want to install it. But i wonder if i need to flash stock rom and kernel. Can you help me pls...
Click to expand...
Click to collapse
it will be better if u do this
abhishekr700 said:
it will be better if u do this
Click to expand...
Click to collapse
actualy just the kernel because jelly noid delete all the /system before it install
opssemnik said:
actualy just the kernel because jelly noid delete all the /system before it install
Click to expand...
Click to collapse
yes.........only kernel flash is better
I intsalled ozcan 4.0 rom and installed stock kernal(linked gaved with the rom)
My phone is getting to hot
Pleassse help i could not most in the rom thread bcz im a new user
Help would be greatly appericte
6rdjp8 said:
I intsalled ozcan 4.0 rom and installed stock kernal(linked gaved with the rom)
My phone is getting to hot
Pleassse help i could not most in the rom thread bcz im a new user
Help would be greatly appericte
Click to expand...
Click to collapse
Hi
Review your setting , wifi , mail , Facebook........see what is running all the time , use something like Better Battery Stats is the only way to find out what is making the phone to get hot.
Please make sure there is no OC , what kernel are you using?
6rdjp8 said:
I intsalled ozcan 4.0 rom and installed stock kernal(linked gaved with the rom)
My phone is getting to hot
Pleassse help i could not most in the rom thread bcz im a new user
Help would be greatly appericte
Click to expand...
Click to collapse
If you are a new user then don't use different kernels. There is not much benefit for you in it. Just flash the rom and don't flash kernels.
Thanks for the replies but Im using the same sittings as I was using before on stock ROM and I did not overlock etc
But changed my kernal cuz the ROM developer wrote in the thread that if you experience slow downs or heatups
Flash this :
So I did it did not solve anything
And here is my kernal stuff Baseband version
l9500XXUGNF6
Kernel version
3.4.5—2200416
[email protected] #1
Fri Jul 11 18:58:53 KST 2014
Build number
OzcanRom.v4.0—KOT49H.l9500XXUGNG3
SE for Android status
Enforcing
SEPF_GT—l9500_4.4.2_0018