Related
I downloaded and ran the new nightly 253. I'm getting a strange bars next to my wifi signal in the status bar. I can make it go away by changing the style of the battery indicator but it comes back on reboot.
I ran nightly 217 with no problems then updated to 246 and got the airplane icon that was always there. read around and saw someone mentioned android assistant. used it to get rid of the airplane icon but now the bars wont go away even after the new nightly
can anyone help me.
should I just go back to the 217 that I liked and had no problems with?
Look at the CM thread, there is a flashible zip for both the signal bar fix(the one you need) and the sod fix.
---------------------------------
Sent from my LG Optimus V using Tapatalk
What's the benefit of the new nightlies over the 7.1.0 stable? Any reason to flash up from that?
DaveZ_PDX said:
What's the benefit of the new nightlies over the 7.1.0 stable? Any reason to flash up from that?
Click to expand...
Click to collapse
Minor improvements. Not anything Nook specific.
---------------------------------
Sent from my LG Optimus V using Tapatalk
koopakid08 said:
Minor improvements. Not anything Nook specific.
---------------------------------
Sent from my LG Optimus V using Tapatalk
Click to expand...
Click to collapse
There was an Encore specific update after 7.1 I'm on 10272001.
zires said:
There was an Encore specific update after 7.1 I'm on 10272001.
Click to expand...
Click to collapse
They are also promising a 7.2RC but I am stable at 201 so unless something really big comes up I am staying where I am............. or if the NC is fully charged and I have had too many cocktails................
patruns said:
They are also promising a 7.2RC but I am stable at 201 so unless something really big comes up I am staying where I am............. or if the NC is fully charged and I have had too many cocktails................
Click to expand...
Click to collapse
how do I know the difference in the stables and the latest nightlies?
calixt0 said:
how do I know the difference in the stables and the latest nightlies?
Click to expand...
Click to collapse
The change logs are here: http://cm-nightlies.appspot.com/?device=encore
Unfortunately, so much of the page is taken up by changes in 2 nightlies it doesn't tell you much.
Does anyone know where the archived changes are?
Hey guys! Official Xoom CM10 Nightlies have been released! I'm not the developer or one in general, I'm just sending out the message.
The latest builds can be found at http://get.cm/?device=wingray&type=nightly.
On a related note though, I've tried both the 9/06 and 9/07 builds and neither were able to boot. I'm just warning you now. If you find a way to get them to boot, please let me know.
swimdude1120 said:
Hey guys! Official Xoom CM10 Nightlies have been released! I'm not the developer or one in general, I'm just sending out the message.
The latest builds can be found at http://get.cm/?device=wingray&type=nightly.
On a related note though, I've tried both the 9/06 and 9/07 builds and neither were able to boot. I'm just warning you now. If you find a way to get them to boot, please let me know.
Click to expand...
Click to collapse
on the google+ site of steady hawking ( https://plus.google.com/104860219450510860872/posts ) are the testbuilds. they work great so far. but check the comments, there you will always find the latest versions
swimdude1120 said:
Hey guys! Official Xoom CM10 Nightlies have been released! I'm not the developer or one in general, I'm just sending out the message.
The latest builds can be found at http://get.cm/?device=wingray&type=nightly.
On a related note though, I've tried both the 9/06 and 9/07 builds and neither were able to boot. I'm just warning you now. If you find a way to get them to boot, please let me know.
Click to expand...
Click to collapse
just tried the 09/08 build and was unable to boot.
Just wait for steady to make an official thread in the development section. Then we'll know we're good to flash the official nightlies
I ran some of his first experimental builds, things looked promising as always from the CM team. Running CNA in the meantime, but I too am eager to go back to flashing CM nightlies. Did have the occasional reboot on some of the older experimental builds, that's why I'm at CNA for stability.
Fingers crossed, can't wait
mauro1992 said:
I ran some of his first experimental builds, things looked promising as always from the CM team. Running CNA in the meantime, but I too am eager to go back to flashing CM nightlies. Did have the occasional reboot on some of the older experimental builds, that's why I'm at CNA for stability.
Fingers crossed, can't wait
Click to expand...
Click to collapse
I'm using it since 2 weeks, no reboots, not FCs. Extreme stable imho
highKo said:
I'm using it since 2 weeks, no reboots, not FCs. Extreme stable imho
Click to expand...
Click to collapse
Good to hear, I'm going to flash the latest nightly tomorrow
highKo said:
I'm using it since 2 weeks, no reboots, not FCs. Extreme stable imho
Click to expand...
Click to collapse
Yeah I used the experimental 9/07 and its amazing how great it is. Very smooth and love the JB butter
Sent from my Galaxy Nexus using XDA Premium HD app
Not working for me, on reboot get the big M as normal then just a blank screen...
Jezwick said:
Not working for me, on reboot get the big M as normal then just a blank screen...
Click to expand...
Click to collapse
Same. CM9 boots fine. EOS 3 boots fine. CM10 sits at a blank screen.
Those of you that have CM10 booting, what recovery are you on?
trunzoc said:
Same. CM9 boots fine. EOS 3 boots fine. CM10 sits at a blank screen.
Those of you that have CM10 booting, what recovery are you on?
Click to expand...
Click to collapse
the experemental builds working more than nice. read some posts above, i wrote there where you find the links (the latest always in the comments of the post)
for the lazy guys: the 0909 nightly for wingray http://goo.gl/k5gop
Looks like wingray only at this point, no stingray builds from the OP's link.
Newest nightly doesnt work on Wingray. 9/10 build
as i said, always look for the latest comments of the xoom post....
Steady HawkinGestern um 21:44+2
9/11 Builds:
Wingray- http://db.tt/bZ1mbOho
Stingray- http://db.tt/1STjSP2n
Everest- http://db.tt/9IpOfqma
Click to expand...
Click to collapse
I was pulling them from the wrong place...and steadys g+ thread was from like august. Lol. Didn't look that far down.
Sent from my ADR6350 using xda premium
Hello, using stable 10.1.3 build and today I received update to Snapshot build 10.2. What is snapshot? Is it something like nightly?
Thank you
Hello
it's a pré-stable build, that's not so stable !
for me, USB tethering causes network losses ( data connection )
& when i have listen an MP3, i get a black screen, and i have to do an hard reboot of the phone...
Edit : Photo whith flash does'nt work properly
So it will be not good step if I'll update to this build, right?
Renecek said:
So it will be not good step if I'll update to this build, right?
Click to expand...
Click to collapse
What build are you using now? Nightly, RC or Stable?
eksasol said:
What build are you using now? Nightly, RC or Stable?
Click to expand...
Click to collapse
CM 10.1.3 Stable
Renecek said:
CM 10.1.3 Stable
Click to expand...
Click to collapse
Nightlies are daily build that are unstable for testing only, but most people flash these and complain when they run into problem.
Snapshots (M1, M2) etc are milestones and tend to be more stable so I think you should be safe flashing them.
RC are release candidates, which means if no bugs are found it will become the stable version.
You should just go ahead and try it, you can always create a Nandroid backup with your recovery. Although you will be going from 4.2.2 (10.1.3) to 4.3 (10.2), so to avoid issues do a factory reset before flashing the new version.
eksasol said:
Nightlies are daily build that are unstable for testing only, but most people flash these and complain when they run into problem.
Snapshots (M1, M2) etc are milestones and tend to be more stable so I think you should be safe flashing them.
RC are release candidates, which means if no bugs are found it will become the stable version.
You should just go ahead and try it, you can always create a Nandroid backup with your recovery. Although you will be going from 4.2.2 (10.1.3) to 4.3 (10.2), so to avoid issues do a factory reset before flashing the new version.
Click to expand...
Click to collapse
OK thank you very much for answer, I understand now.
updated, works fine
I flashed CM 13 (http://forum.xda-developers.com/oneplus-2/development/6-0-x-cyanogenmod-13-oneplus-2-t3292436) and I got a wifi problem: when ON, it will continually turn OFF and ON without stopping, until I turn it off manually;
any ideas? I can't use wifi like this!
Method already used: set wifi to 2,4 Ghz - flashed "New Modem" - WiFi is working with other ROMs, so it's a CM13 problem!
There have been reports of wifi issues with Seraph's build. I am using Cyanpop (201602225) and Benschholds kernel 1.2 and its solid as a rock (everything including Wifi).
ludester said:
There have been reports of wifi issues with Seraph's build. I am using Cyanpop (201602225) and Benschholds kernel 1.2 and its solid as a rock (everything including Wifi).
Click to expand...
Click to collapse
Thx man! what do you think about your custom kernel? is that better than stock of cyanpop?
Shandroid_94 said:
Thx man! what do you think about your custom kernel? is that better than stock of cyanpop?
Click to expand...
Click to collapse
Did you solve your issue? I have the same problem, tried Seraph8, Grarak,.... all the same (I think also in Resurrection Remix)
sevensirk said:
Did you solve your issue? I have the same problem, tried Seraph8, Grarak,.... all the same (I think also in Resurrection Remix)
Click to expand...
Click to collapse
I finally flashed the Cyanpop like the user told me. Now Wifi is perfectly working like everything. I don't know why other ROMs cm13 get this problem and cyanpop works nice.
But I found out that is a problem of ''MY WIFI'', of my router. It certainly has a particular option flagged that cause this problem.. If you find solution please contact me!
Download link removed. Please head over to N7105 thread now as developer is releasing builds for E250S and E250K as well.
what specific ril patch should we use on shv-e250k models?
Option58 said:
How to install Android 6 on Korean Note 2 devices:
Big thanks to @Strawberry_dev, he actually made this possible. He is the one to make a kernel to convert N7015 AOSP ROMs to Korean ones. Thank him (and ROM devs), this is NOT my work! I just wrote this tutorial.
I strongly recommend this to everyone. Way better than Samsung 4.4. It literally saved me from a buying new device. It's really fast and up to date. Suitable for use in 2016.
Click to expand...
Click to collapse
Stuck on bootloop
axl1234 said:
what specific ril patch should we use on shv-e250k models?
Stuck on bootloop
Click to expand...
Click to collapse
Ril patch not needed.
Option58 said:
Then I guess this doesn't work for E250K very well. Can someone share experiences?
I've only tested this on my E250S.
Click to expand...
Click to collapse
sir.do you have any links for the files that you used?especially the RIL patch. i did follow the instructions but I had problems downloading the ril patch. if you could upload it through mediafire or any cloud servers. that would be great. I guess what causes my SHV-E250K to bootloop is that the RIL patch was not flashed and it stucked on the Cyanogen Icon
Note 2 E250S - unable to get wifi working
I now have everything working except wifi. I downloaded the wifi mac address patch, but it didn't help. Is there an app I can use for the wifi? Or an alternative patch to download and flash? Thank you.
Freddy1950 said:
I now have everything working except wifi. I downloaded the wifi mac address patch, but it didn't help. Is there an app I can use for the wifi? Or an alternative patch to download and flash? Thank you.
Click to expand...
Click to collapse
That's very strange. Wifi should work. When I flash roms for N7100, N7105, etc. wifi works every single time.
The only thing that comes to my mind is that you weren't running latest firmware prior to installing this.
Forget Android 6 and go to Android 7. From Android 4.4, just follow the steps in the 1st thread, but do not install Widzard Kernel 2.7 & Gapps for 6.0. Then, download and dirty install any Android 7 ROM for N7105 and the corresponding GAPPS. Please note than Widzard Kernel does not seem compatible with Android 7. The Kernel included in the Android 7 ROM is enough for Korean Galaxy Note 2 (mine : SHV-E250S).
vincentru said:
Forget Android 6 and go to Android 7. From Android 4.4, just follow the steps in the 1st thread, but do not install Widzard Kernel 2.7 & Gapps for 6.0. Then, download and dirty install any Android 7 ROM for N7105 and the corresponding GAPPS. Please note than Widzard Kernel does not seem compatible with Android 7. The Kernel included in the Android 7 ROM is enough for Korean Galaxy Note 2 (mine : SHV-E250S).
Click to expand...
Click to collapse
True :good: But vibrator not working yet on E250S...On the other hand, widzard kernel has problem recording video so without it that will work.
Option58 said:
That's very strange. Wifi should work. When I flash roms for N7100, N7105, etc. wifi works every single time. This Widzard patch is intended to fix vibration.
The only thing that comes to my mind is that you weren't running latest firmware prior to installing this. Also some mac wifi fixes actually break wifi. For our device it is murata.
Click to expand...
Click to collapse
I have the wifi working fine now. Thank you. I am not sure what I did to get it working. Thanks.
---------- Post added at 06:49 AM ---------- Previous post was at 06:42 AM ----------
Option58 said:
That's very strange. Wifi should work. When I flash roms for N7100, N7105, etc. wifi works every single time. This Widzard patch is intended to fix vibration.
The only thing that comes to my mind is that you weren't running latest firmware prior to installing this. Also some mac wifi fixes actually break wifi. For our device it is murata.
Click to expand...
Click to collapse
Option58 said:
True :good: But vibrator not working yet on E250S...On the other hand, widzard kernel has problem recording video so without it that will work.
Click to expand...
Click to collapse
I can just dirty boot now to Nougat? Using N7105?
Freddy1950 said:
I can just dirty boot now to Nougat? Using N7105?
Click to expand...
Click to collapse
Yes. But I honestly don't have any idea how to fix vibration motor for E250S. So far N7105 Nougat builds are ok.
Edit: vibration fixed
N7105 for E250S
Option58 said:
Yes. But I honestly don't have any idea how to fix vibration motor for E250S. So far N7105 Nougat builds are ok.
It would be cool if Widzard kernel dev updated it to Nougat. But that's still not LinaegeOS original kernel.
Click to expand...
Click to collapse
I cannot find an N7105 Nougat ROM, I can only find for N7100. Is there an N7105 ROM? or do I just use the N7100?
Thank you so much for all of the help.
Freddy1950 said:
I cannot find an N7105 Nougat ROM, I can only find for N7100. Is there an N7105 ROM? or do I just use the N7100?
Thank you so much for all of the help.
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-note-2/development-n7105/rom-lineageos-n7105-t3538310
I do have shv-e250k... will any of these roms you are talking about works in my device? I tried installing installing a lot of roms however it always stuck on bootloop..I hope someone will answer...thank you
axl1234 said:
I do have shv-e250k... will any of these roms you are talking about works in my device? I tried installing installing a lot of roms however it always stuck on bootloop..I hope someone will answer...thank you
Click to expand...
Click to collapse
Yeah, they will.
Can anyone help me to upgrade note 2 e250s to marshmallow?
Option58 said:
https://forum.xda-developers.com/galaxy-note-2/development-n7105/rom-lineageos-n7105-t3538310
Click to expand...
Click to collapse
Thanks! I now have Nougat installed on my Note 2 E250S. It's great! Just love it.
Good news. I've finally got vibration to work on my E250S. Started building LineageOS 14.1 myself from now on.
Please test this on your E250L and E250K and we'll see if we can get things working for you.
Option58 said:
Good news. I've finally got vibration to work on my E250S. Started building LineageOS 14.1 myself from now on.
Please test this on your E250L and E250K and we'll see if we can get things working for you.
Click to expand...
Click to collapse
Congrats on finally fixing this. I know it was a long hard fight for you :good:
Option58 said:
Then I guess this doesn't work for E250K very well. Can someone share experiences?
I've only tested this on my E250S.
Click to expand...
Click to collapse
bro i m using lineage os unoffical rom by poisonNinja bro on my samsung galaxy note 2 e250k
it work fine for me all clear