Database Users

[Q] HELP - settings force close and no wifi

Someone must know the answer to these 2 questions, I've been searching for days and keep getting little issues, keep resolving them but then run into new issues.
My last 2 problems (I hope) are as follows.
1)
No wifi - here's the details of my modems etc:
AP: I9505XXUFNA5
CP: I9505XXUEMJ5
CSC: I9505OXAFNA5
I'm running WanamLite 2.0 (4.4.2 )
2)
When i go to 'Settings >> More >> Security' it FC's and says Unfortunately, Settings has stopped.
How do I fix these issues??
Thanks

wife fix
You can fix the wifi issue by updating your phone modem to NA5. Unfortunately I'm also stuck on that settings problem. Still haven't found a solution for that yet.

FelixCited said:
Someone must know the answer to these 2 questions, I've been searching for days and keep getting little issues, keep resolving them but then run into new issues.
My last 2 problems (I hope) are as follows.
1)
No wifi - here's the details of my modems etc:
AP: I9505XXUFNA5
CP: I9505XXUEMJ5
CSC: I9505OXAFNA5
I'm running WanamLite 2.0 (4.4.2 )
2)
When i go to 'Settings >> More >> Security' it FC's and says Unfortunately, Settings has stopped.
How do I fix these issues??
Thanks
Click to expand...
Click to collapse
Suggest you flash original stock ROM, root, install recovery and then wipe cache/dalvik /data/system - then flash what ever ROM you like and start again. Careful what stock you choose unless you don't mind/already have new boot loader.
Probably not what you wanted to hear but if you have been stuck with these issues for days it may be the easiest quickest way to resolve
No need to boot up stock ROM, you can simply go straight back into down load mode and flash cf auto root/recovery then boot into recovery.

Jimsilver73 said:
Suggest you flash original stock ROM, root, install recovery and then wipe cache/dalvik /data/system - then flash what ever ROM you like and start again. Careful what stock you choose unless you don't mind/already have new boot loader.
Probably not what you wanted to hear but if you have been stuck with these issues for days it may be the easiest quickest way to resolve
No need to boot up stock ROM, you can simply go straight back into down load mode and flash cf auto root/recovery then boot into recovery.
Click to expand...
Click to collapse
haha thanks man, i actually am having a different issue now although i have by coincidence, flashed back to that same wanam rom that i am unable to get into the security settings with and still has the same error.
I have still got these issues and havent really been able to use my S4 for about a month which is so frustrating...
heres my recent post:
"" Originally Posted by Repulsa
Download and Flash this file via odin by Selecting Phone/CP . and tell me if it works ""
----------
----------
Hey OP / kasperwo - did this work?? I'm having the same issues. Repulsa helped me before (thanks again) but then I went and flashed a different rom and the same problem came back. i think there was an underlying issue that basically was "covered by a bandaid" and which reappeared after flashing a new rom (CM11 i think)
so after all this i downloaded the stock german 4.4.2 leak, wifi stopped working, lost root access.
Then was able to flash Philz Touch recovery, re rooted using that, then flashed a different rom (wanamLite) and still no wifi etc
Last night it was reading:
AP: I9505XXUFNA5
CP: I9505XXUFNA5
CSC:I9505XXUFNA5
Its all the same now except
CP: I9505XXUFNB8
Any help is much appreciated

FelixCited said:
haha thanks man, i actually am having a different issue now although i have by coincidence, flashed back to that same wanam rom that i am unable to get into the security settings with and still has the same error.
I have still got these issues and havent really been able to use my S4 for about a month which is so frustrating...
heres my recent post:
"" Originally Posted by Repulsa
Download and Flash this file via odin by Selecting Phone/CP . and tell me if it works ""
----------
----------
Hey OP / kasperwo - did this work?? I'm having the same issues. Repulsa helped me before (thanks again) but then I went and flashed a different rom and the same problem came back. i think there was an underlying issue that basically was "covered by a bandaid" and which reappeared after flashing a new rom (CM11 i think)
so after all this i downloaded the stock german 4.4.2 leak, wifi stopped working, lost root access.
Then was able to flash Philz Touch recovery, re rooted using that, then flashed a different rom (wanamLite) and still no wifi etc
Last night it was reading:
AP: I9505XXUFNA5
CP: I9505XXUFNA5
CSC:I9505XXUFNA5
Its all the same now except
CP: I9505XXUFNB8
Any help is much appreciated
Click to expand...
Click to collapse
Suggest you go to this thread: http://forum.xda-developers.com/showthread.php?t=2192025 and read and learn about modems, I suspect you may find the answers there.
What happens when you flash official 4.3 firmware?
You may be well to backup your SD card, then flash official firmware, before rooting go to stock recovery and wipe data from there. This will leave your phone brand new with only stock files on there, it will format EVERYTHING!
May be worth a go

Jimsilver73 said:
Suggest you go to this thread: http://forum.xda-developers.com/showthread.php?t=2192025 and read and learn about modems, I suspect you may find the answers there.
What happens when you flash official 4.3 firmware?
You may be well to backup your SD card, then flash official firmware, before rooting go to stock recovery and wipe data from there. This will leave your phone brand new with only stock files on there, it will format EVERYTHING!
May be worth a go
Click to expand...
Click to collapse
Thanks for the tips, I actually did that last night with stock 4.4.2 firmware. Im going to try the 4.3 tonight as I suspect I may by some miracle, still have the old bootloader and is not tripped yet.
I just installed a foxhound rom - 3.6 and now wifi works (sound doesnt)
Cheers

FelixCited said:
Thanks for the tips, I actually did that last night with stock 4.4.2 firmware. Im going to try the 4.3 tonight as I suspect I may by some miracle, still have the old bootloader and is not tripped yet.
I just installed a foxhound rom - 3.6 and now wifi works (sound doesnt)
Cheers
Click to expand...
Click to collapse
hmm - from what I have read on the thread about modems I sent you the link to (have you read it yet?) this is to do with having new modem on old bootloader - it breaks sound and/or wifi.
You need to get the right modem for your bootloader - 4.3 I think, but check the thread

Jimsilver73 said:
hmm - from what I have read on the thread about modems I sent you the link to (have you read it yet?) this is to do with having new modem on old bootloader - it breaks sound and/or wifi.
You need to get the right modem for your bootloader - 4.3 I think, but check the thread
Click to expand...
Click to collapse
Nope havent read the whole thread but very familiar with it. Is there any particular page I should look at? And how are we supposed to figure out what bootloader you have/which modem to flash? Thats what ive been trying to figure out this whole time

FelixCited said:
Nope havent read the whole thread but very familiar with it. Is there any particular page I should look at? And how are we supposed to figure out what bootloader you have/which modem to flash? Thats what ive been trying to figure out this whole time
Click to expand...
Click to collapse
When you put your phone into download mode do you see red and yellow writing in the top left hand corner - if so you have new bout loader, if not old - that should help you work out which modem you need.
What happened when you flashed official 4.3 through Odin and wipe?

Jimsilver73 said:
hmm - from what I have read on the thread about modems I sent you the link to (have you read it yet?) this is to do with having new modem on old bootloader - it breaks sound and/or wifi.
You need to get the right modem for your bootloader - 4.3 I think, but check the thread
Click to expand...
Click to collapse
ANND :
i am sort of at the point where I dont care about tripping knox.. So if I have to flash a different bootloader (which I already thought I had done) how do I find which one to flash?
I just want it FIXED my S2 that im using is so damn slow and has issues of its own

Jimsilver73 said:
When you put your phone into download mode do you see red and yellow writing in the top left hand corner - if so you have new bout loader, if not old - that should help you work out which modem you need.
What happened when you flashed official 4.3 through Odin and wipe?
Click to expand...
Click to collapse
Thanks for the responses dude, I've done SO MUCH reading but it seems everyone else is fixing it but when I try their methods it just doesnt work for me...
I didnt end up flashing the 4.3 - it got to 98% downloaded and then failed so I have to restart the DL and try again

FelixCited said:
Thanks for the responses dude, I've done SO MUCH reading but it seems everyone else is fixing it but when I try their methods it just doesnt work for me...
I didnt end up flashing the 4.3 - it got to 98% downloaded and then failed so I have to restart the DL and try again
Click to expand...
Click to collapse
And do you have new knox bootloader (red and yellow writing when you boot)?

Jimsilver73 said:
And do you have new knox bootloader (red and yellow writing when you boot)?
Click to expand...
Click to collapse
Nope, in download mode there is nothing that says KNOX, it just says
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable

FelixCited said:
Nope, in download mode there is nothing that says KNOX, it just says
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
Click to expand...
Click to collapse
OK - so you have no red and yellow small writing when you boot up that says something along the lines of non seandroid kernel?
EDIT: so it seems you are on old bootloader - if you have no knox references - which means that if you have flashed xxufna1 with non HLOS modem that would break stuff - like I said before, I think you really need to flash official 4.3 (which will give you the right modems) - test and see if it all works and then go from there
When you want to update modem then just update gsm modem - I use this one XXUFNB8

Jimsilver73 said:
OK - so you have no red and yellow small writing when you boot up that says something along the lines of non seandroid kernel?
EDIT: so it seems you are on old bootloader - if you have no knox references - which means that if you have flashed xxufna1 with non HLOS modem that would break stuff - like I said before, I think you really need to flash official 4.3 (which will give you the right modems) - test and see if it all works and then go from there
When you want to update modem then just update gsm modem - I use this one XXUFNB8
Click to expand...
Click to collapse
Yeah no SEandroid entry. It's red and grey writing from memory. I've finally been able to complete the download, will try flashing now.

Jimsilver73 said:
OK - so you have no red and yellow small writing when you boot up that says something along the lines of non seandroid kernel?
EDIT: so it seems you are on old bootloader - if you have no knox references - which means that if you have flashed xxufna1 with non HLOS modem that would break stuff - like I said before, I think you really need to flash official 4.3 (which will give you the right modems) - test and see if it all works and then go from there
When you want to update modem then just update gsm modem - I use this one XXUFNB8
Click to expand...
Click to collapse
ARGGGGGH
no luck... even worse than before as wifi isnt working now... i'll have to flash back to Omega 16
EDIT:
Thats a lie - i just checked and sound is working. So thats a good sign... Now I think it'd be a matter of flashing the correct modem which should fix wifi am i right?
Currently on:
AP: xxuemk9
CP: xxuemj5
xxuemk9csc: i9505H3GEMJ2

FelixCited said:
ARGGGGGH
no luck... even worse than before as wifi isnt working now... i'll have to flash back to Omega 16
EDIT:
Thats a lie - i just checked and sound is working. So thats a good sign... Now I think it'd be a matter of flashing the correct modem which should fix wifi am i right?
Currently on:
AP: xxuemk9
CP: xxuemj5
xxuemk9csc: i9505H3GEMJ2
Click to expand...
Click to collapse
So you have flashed stock 4.3 through Odin now then?

Jimsilver73 said:
So you have flashed stock 4.3 through Odin now then?
Click to expand...
Click to collapse
ITS W O R K I N G
FINALLY
That only took a whole frggen month.
Thanks heaps for the ideas man I really appreciate it.
After flashing that 4.3 XXUEMK9_I9505H3GEMJ2_H3G i noticed sound was working, then I flashed PhilzTouch recovery through Odin, flashed
GSM_Modem_XXUEMJ9_and_LTE_Modem_XXUBMH1.tar
After that I did a ROM wipe in PhilzTouch and flashed Omega v16, booted up and YES FINALLY I have wifi, sound and everything is working...
BUT now im back in square 1 really, i originally wanted to flash something different because the battery life on Omega v16 isnt that great on my phone for whatever reason...
But hey at least I can use it now.

FelixCited said:
ITS W O R K I N G
FINALLY
That only took a whole frggen month.
Thanks heaps for the ideas man I really appreciate it.
After flashing that 4.3 XXUEMK9_I9505H3GEMJ2_H3G i noticed sound was working, then I flashed PhilzTouch recovery through Odin, flashed
GSM_Modem_XXUEMJ9_and_LTE_Modem_XXUBMH1.tar
After that I did a ROM wipe in PhilzTouch and flashed Omega v16, booted up and YES FINALLY I have wifi, sound and everything is working...
BUT now im back in square 1 really, i originally wanted to flash something different because the battery life on Omega v16 isnt that great on my phone for whatever reason...
But hey at least I can use it now.
Click to expand...
Click to collapse
Glad you are all sorted - if you are looking for good battery life and performance (the holy grail lol) maybe try my set up as in the links in my signature. I would recommend not flashing modem to start with as what you have works for you now. I can whole heatedly recommend slim + alucard, I get 5 hours screen on time over 24 hours use with fantastic performance oh, and a load of awesome features with slim too

Jimsilver73 said:
Glad you are all sorted - if you are looking for good battery life and performance (the holy grail lol) maybe try my set up as in the links in my signature. I would recommend not flashing modem to start with as what you have works for you now. I can whole heatedly recommend slim + alucard, I get 5 hours screen on time over 24 hours use with fantastic performance oh, and a load of awesome features with slim too
Click to expand...
Click to collapse
Trust me dude, Im gald its sorted too
Ok cool I'll try out your recommendation. Which version should I use? 4.4.2?
And if i flash the zip will it also flash the modem and screw my phone up again?

ROMs unflashable, i9505 S4 XUBMF8

Hi there all,
I've been encountering a weird issue with the i9505 S4 XUBMF8. For whatever reason, I am currently unable to flash custom ROMs on it. The phone is KNOX-free and I have previously flashed custom ROMs on it before. I am able to root via CF Auto Root, install Triangle Away, but whenever a file is copied onto the phone's storage it never completes successfully (for example Broodplank's ROM will always be 10-15mb short). Even downloading the custom ROM directly onto the phone via stock Browser results on a Status 7 error.
Changing from CWM Recovery to Team Win doesn't help either, nor changing usb ports / computers and cables. (I've used both Generic and Samsung-branded ones.)
This is a phone which has previously managed to run custom ROMs, flashes stock Samsung ROMs and Radios via Download Mode fine, and installs "unknown" .apks fine as well.
Does anyone know what i'm doing wrong?
Summary: Phone currently running stock XUBMF8 (Firmware it came out of the box with), roots fine and installs custom Recoveries fine, flashes fine via Download mode. Just refuses to copy files properly (despite multiple formats / factory resets / flash stock firmware) and refuses to flash custom ROMs via custom Recoveries.

Devione said:
Hi there all,
I've been encountering a weird issue with the i9505 S4 XUBMF8. For whatever reason, I am currently unable to flash custom ROMs on it. The phone is KNOX-free and I have previously flashed custom ROMs on it before. I am able to root via CF Auto Root, install Triangle Away, but whenever a file is copied onto the phone's storage it never completes successfully (for example Brooplank's ROM will always be 10-15mb short). Even downloading the custom ROM directly onto the phone via stock Browser results on a Status 7 error.
Changing from CWM Recovery to Team Win doesn't help either, nor changing usb ports / computers and cables. (I've used both Generic and Samsung-branded ones.)
This is a phone which has previously managed to run custom ROMs, flashes stock Samsung ROMs and Radios via Download Mode fine, and installs "unknown" .apks fine as well.
Does anyone know what i'm doing wrong?
Click to expand...
Click to collapse
XUBMF8 is android 4.2.2 for branded phones:
- Spain (yoigo) or Poland (Play)
* Solution could be flash one stock rom for unbranded phone if is your case. Anyway if u conect ur phone to Kies and tell me ur CSC I can tell u what stock firmware is good for your unbranded phone

Joku1981 said:
XUBMF8 is android 4.2.2 for branded phones:
- Spain (yoigo) or Poland (Play)
* Solution could be flash one stock rom for unbranded phone if is your case. Anyway if u conect ur phone to Kies and tell me ur CSC I can tell u what stock firmware is good for your unbranded phone
Click to expand...
Click to collapse
Hi mate,
My CSC is i9505OLBBMF8
I used the *#1234# method.
Hope that helps. Thanks for your time.

Devione said:
Hi mate,
My CSC is i9505OLBBMF8
I used the *#1234# method.
Hope that helps. Thanks for your time.
Click to expand...
Click to collapse
Yw. We need to know your S4's CSC, as this has to match your firmware. If you install Kies (in ur pc) then you will get your firmware CSC :highfive:

Joku1981 said:
Yw. We need to know your S4's CSC, as this has to match your firmware. If you install Kies (in ur pc) then you will get your firmware CSC :highfive:
Click to expand...
Click to collapse
Hi there,
I've installed Kies and according to the "Firmware Information" section it says
Current firmware version: PDA:MF8 / PHONE:MF8 / CSC: MF8 (SIN)
Is that the right place i'm looking at? I've never used KIES before, this is my first,
Thanks for your time.

Devione said:
Hi there,
I've installed Kies and according to the "Firmware Information" section it says
Current firmware version: PDA:MF8 / PHONE:MF8 / CSC: MF8 (SIN)
Is that the right place i'm looking at? I've never used KIES before, this is my first,
Thanks for your time.
Click to expand...
Click to collapse
Yes is what I need. Ur phone is branded to Singapure (sintel). Do u unlocked it?

Joku1981 said:
Yes is what I need. Ur phone is branded to Singapure (sintel). Do u unlocked it?
Click to expand...
Click to collapse
It's unlocked, yes. This mobile was actually originally bought in Malaysia, unbranded and unlocked. I could not find any Malaysian XUBMF8, so I downloaded the SingTel one as an alternative whenever I needed to reset my phone to stock.

Devione said:
It's unlocked, yes. This mobile was actually originally bought in Malaysia, unbranded and unlocked. I could not find any Malaysian XUBMF8, so I downloaded the SingTel one as an alternative whenever I needed to reset my phone to stock.
Click to expand...
Click to collapse
Maybe the unique u need is factory reset ur phone :highfive:

Joku1981 said:
Maybe the unique u need is factory reset ur phone :highfive:
Click to expand...
Click to collapse
Hi there,
Apparently that doesn't work. I've tried resetting with stock, custom recoveries and through TouchWiz itself. It still gets the Status 7 error. Toggling "Verification Check" results in a failure, even though the MD5 checks out.
I really am at wits' end here...

Devione said:
Hi there,
Apparently that doesn't work. I've tried resetting with stock, custom recoveries and through TouchWiz itself. It still gets the Status 7 error. Toggling "Verification Check" results in a failure, even though the MD5 checks out.
I really am at wits' end here...
Click to expand...
Click to collapse
Try other ODIN and other USB port in ur pc
*EDIT: For factory reset ur phone u dont need flash nothing:
1. Backup ur data of ur Internal Memory
2. From your home screen press the apps icon in the lower right corner.
3. Find and press the settings icon.
4. In the upper end of the screen press the accounts tab.
5. in the bottom of the next screen press the Backup and reset button.
6. Press the factory data reset.
7. Read the info on your cell phone screen and hit Reset device.
8. Try to flash the firmware u wish again
9. If all go correct, copy ur data folders again in your phone and install the apps u had

Joku1981 said:
Try other ODIN and other USB port in ur pc
*EDIT: For factory reset ur phone u dont need flash nothing:
1. Backup ur data of ur Internal Memory
2. From your home screen press the apps icon in the lower right corner.
3. Find and press the settings icon.
4. In the upper end of the screen press the accounts tab.
5. in the bottom of the next screen press the Backup and reset button.
6. Press the factory data reset.
7. Read the info on your cell phone screen and hit Reset device.
8. Try to flash the firmware u wish again
9. If all go correct, copy ur data folders again in your phone and install the apps u had
Click to expand...
Click to collapse
Hi there,
I've did that before and it didn't work. I mentioned in the OP.

Devione said:
Hi there,
I've did that before and it didn't work. I mentioned in the OP.
Click to expand...
Click to collapse
what ODIN u are using?

Joku1981 said:
what ODIN u are using?
Click to expand...
Click to collapse
Hi there,
I've used 3 versions, 3.04, 3.07 and 3.09.

Devione said:
Hi there,
I've used 3 versions, 3.04, 3.07 and 3.09.
Click to expand...
Click to collapse
Anybody?
I'm running out of ideas, and after extensive searching it seems i'm the only one with this problem.

how to carrier unlock GT-I9300 on 4.3 (easy 6 step)

I find whole forums and also on Google to unlock my galaxy s3 i9300 running on 4.3 but unfortunately there was no solution. All solutions are for 4.1.1 which are very old. Then I did it my self and of course for free. Here are the steps.
1. First root your device by chain fire auto root and insert a sim card.
2. Download twrp manager from play store, open twrp manager and install recovery.
3. Download attached apk file and install it.
4. Open perka's file stash, tap on s3 then modems and modems cwm.
5. Tap 4.3 and download modem_xxugna8.
6. After download go to previously downloaded twrp manager then select install > add zip > select downloaded modem from perka's file tash named folder and flash it. After boot up you should be unlocked.
Don't forget to hit Thanks.

Hi i am on archidroid rom 4.3 rooted with cwm .will this work?
Sent from my GT-I9300 using XDA Premium HD app

caput1234 said:
Hi i am on archidroid rom 4.3 rooted with cwm .will this work?
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
Is your phone carrier locked? You must be on stock rom to unlock thie way.

any proof this actually works?
is the phone afterwords, factory unlocked?

cassinni said:
any proof this actually works?
is the phone afterwords, factory unlocked?
Click to expand...
Click to collapse
If u need proof u can try and let us know how it's work. Obviously phn will be unlocked after this.

nafis_t said:
If u need proof u can try and let us know how it's work. Obviously phn will be unlocked after this.
Click to expand...
Click to collapse
it does NOT work. I tired to call and it says "Not registered with network".
When you boot it also asks for an unlock code.
I did everything as described.

cassinni said:
it does NOT work. I tired to call and it says "Not registered with network".
When you boot it also asks for an unlock code.
I did everything as described.
Click to expand...
Click to collapse
What's your model? Android version? And Baseband?
I did it with no problem.

nafis_t said:
What's your model? Android version? And Baseband?
I did it with no problem.
Click to expand...
Click to collapse
AP: I9300XXUGNA5
CP: I9300XXUGNA8
CSC: I9300VFGGNB1
Android 4.3
See my CP is the one this guide wanted me to flash.
I have a signal bar but it says when i want to call someone "not registered with network" and i cannot call.

cassinni said:
AP: I9300XXUGNA5
CP: I9300XXUGNA8
CSC: I9300VFGGNB1
Android 4.3
See my CP is the one this guide wanted me to flash.
I have a signal bar but it says when i want to call someone "not registered with network" and i cannot call.
Click to expand...
Click to collapse
At first on step 4 open parkas file stash tap kernel > kernel_stock> 4.1.2 then download lk6 kernel and flash via odin. After flash again open parka and tap modems> modems_cwm > 4.1.2> then download lk3 modem and flash it via recovery. After this your baseband should be shown as unknown on about phone. Then follow the whole process from 1st from above. Though you're on na8 you should flash na8 frok perka's file because its unlocked.

It doesn't work for me too ,when I tried to install kernel 4.1.2 but when I install it the phone doesn't load the room ( I had 4.3 )
any help here please?

Thanks
Sent from my A500 using XDA Free mobile app

I followed all instructions and nothing happened. My phone continues to work without problem but it's still locked. Worth the shot though

splattx_x said:
I followed all instructions and nothing happened. My phone continues to work without problem but it's still locked. Worth the shot though
Click to expand...
Click to collapse
It doesn't work on new security devices, obviously.

Dont work for me, when i enter in the app i dont see anything as for select any option

Help please

Hello everyone i have a note 3 and it is rooted and has a a kernel flashed on it, now i want to revert back to my stock rom and i know i have to download the software and flash it with odin but i cant find my software anywhere could anyone give me a link to the firmware for my specific device here are its details
build number: N9005XXUDMJ7
CSC:N9005DTUDMJ4
NAME:NOTE 3 N9005
PLEASE HELP ME I WOULD BE REALLY GRATE-FULL TO THE PERSN WHO CAN LEND ME THE LINK I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS BUT I REALLY WANT TO GO BACK TO STOCK PLEASE. THANKYOU

go to sammobile.com and search for your model there

kewlkaka1203 said:
Hello everyone i have a note 3 and it is rooted and has a a kernel flashed on it, now i want to revert back to my stock rom and i know i have to download the software and flash it with odin but i cant find my software anywhere could anyone give me a link to the firmware for my specific device here are its details
build number: N9005XXUDMJ7
CSC:N9005DTUDMJ4
NAME:NOTE 3 N9005
PLEASE HELP ME I WOULD BE REALLY GRATE-FULL TO THE PERSN WHO CAN LEND ME THE LINK I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS BUT I REALLY WANT TO GO BACK TO STOCK PLEASE. THANKYOU
Click to expand...
Click to collapse
Install app called "phone Info" from google store, it will take you to correct firmware as per your country origin.

kewlkaka1203 said:
I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS
Click to expand...
Click to collapse
That shouldn't have failed, CSC mismatch is not a cause of flash failure. Can you provide more details?

Hm...
Hi guys,
I had an issue similar to this and have no recollection what I did to fix it. I don't even think that I fixed it, ever. Meaning - no stock ROM install for me for months and months now.
I just downloaded some AOSP/TW ROM and flashed. Are you able to get to the custom recovery? Please confirm - I've read somewhere that you can flash stock from custom recovery. I did try a few "PIT" files, with no help.
P.S. I remembered a bit now. I was finally able to flash it through Odin, but entered boot loop. So, no go!
My eyes are on this thread.
Good luck,
Sonny B.

details↓↓↓↓
Bulbous said:
That shouldn't have failed, CSC mismatch is not a cause of flash failure. Can you provide more details?
Click to expand...
Click to collapse
Um sorry for the late reply. So what happens is i down the firmware from sammobile sure that it was for my model and build number but the csc was of switzerland different than mine next i flashed the rom from 3 different versions of odin starting from v.3.10 it started saying checking md5 file and it was taking too long and we had lost hope then suddenly it said md5 read succesfully and then brought up another dialouge saying setup connection and then cam up with a fail message usb debugging and all the process was done correctly i know this is a late reply but please reply back if you are there thanks

if....
sonny_b_bih said:
Hi guys,
I had an issue similar to this and have no recollection what I did to fix it. I don't even think that I fixed it, ever. Meaning - no stock ROM install for me for months and months now.
I just downloaded some AOSP/TW ROM and flashed. Are you able to get to the custom recovery? Please confirm - I've read somewhere that you can flash stock from custom recovery. I did try a few "PIT" files, with no help.
P.S. I remembered a bit now. I was finally able to flash it through Odin, but entered boot loop. So, no go!
My eyes are on this thread.
Good luck,
Sonny B.
Click to expand...
Click to collapse
If it was a pass message on odin it shouldve worked go into recovery mode and do a factory reset from there it should work it happened with me too but remember dont leave the phone switched on as its stuck in boot loop cause when the powers dead ur phone wont charge any more it would keep thinking as if its not bieng charged if thats what u did i recommend making a factory cable search it on google and charge from that so the device knows its bieng charged once the wipe data is done reset and hopefully it would work if not i think u should flash another stock rom again i hope i helped

kewlkaka1203 said:
If it was a pass message on odin it shouldve worked go into recovery mode and do a factory reset from there it should work it happened with me too but remember dont leave the phone switched on as its stuck in boot loop cause when the powers dead ur phone wont charge any more it would keep thinking as if its not bieng charged if thats what u did i recommend making a factory cable search it on google and charge from that so the device knows its bieng charged once the wipe data is done reset and hopefully it would work if not i think u should flash another stock rom again i hope i helped
Click to expand...
Click to collapse
Did you solve ur problem?

........
Joku1981 said:
Did you solve ur problem?
Click to expand...
Click to collapse
NO

Hi guys ,
There're three possibilities about the country origin by comparing the data on sammobile.You can try to flash these three versions firmwares.one of them must be correct! Portugal PDA:N9005XXUDMJ7 CSC:N9005OPTDMJ4 SLOVENIA PDA:N9005XXUDMJ7 CSC:N9005OXXDMJ4 POLAND PDA:N9005XXUDMJ7 CSC:N9005PRTDMJ4.download link is also on sammobile.com!
Good luck!
Sent from my SM-N9005 using XDA Free mobile app

Install Phone INFO ★Samsung★ app > Menu > 'Firmware Browser'. Download the firmware for your device and flash it via Odin.

(Problem) SW REV. CHECK FAIL. DEVICE: 2. Binary: 1.

Hello guys!
I have a big problem with my S7 edge (G935F)... The problem begins when I forget to turn off the OEM security and then I did an update to my Magisk root... When I tried to reboot my phone it doesn't pass of the first logo image, meaning that I broke the "security", so I read about that and then I flashed a firmware, an official UK (BTU I guess) firmware and then I flashed TWRP via Odin to restore a nandroid that I did when I bought my phone... It restored the EFS partition/folder and when my phone reboots I had no network signal, no IMEI... I just tried everything (I hope not) and I can't give back my IMEI and my network signal... When I try to patch the certificate to recover my IMEI via Odin in the download mode it says: SW REV. CHECK FAIL. DEVICE:2. Binary:1
I don't know if I explained it because my english is too bad, but I tried, I know that someone else have the same problem than I because I saw it. Do you find the solution? I'm out of my country and I need it so much :crying:
Regards!

Flash latest stock with csc, but skip bl section

amakuramio said:
Flash latest stock with csc, but skip bl section
Click to expand...
Click to collapse
Thank you for answer me.
I did it with three diferent stock firmwares and the problem persists (no network signal) I think that is something with the EFS folder, I restored a backup of it but is the same, I have not signal yet, but thank you!

Try clean formatting
Arachnorbit said:
Thank you for answer me.
I did it with three diferent stock firmwares and the problem persists (no network signal) I think that is something with the EFS folder, I restored a backup of it but is the same, I have not signal yet, but thank you!
Click to expand...
Click to collapse
Hey brother it happened with me too, unfortunately, I had to format my internal storage to fix this, you need to flash the latest nougat firmware via odin with csc including bl and modem and then start in recovery then format and start phone, remember you would need to put the google account which was previously there in the phone to unlock and complete setup process (very important here)

invinsible_asp said:
Hey brother it happened with me too, unfortunately, I had to format my internal storage to fix this, you need to flash the latest nougat firmware via odin with csc including bl and modem and then start in recovery then format and start phone, remember you would need to put the google account which was previously there in the phone to unlock and complete setup process (very important here)
Click to expand...
Click to collapse
Thank you! Do you know which Firmware I need to flash? Because I flashed a lot of firmwares and it didn't work! You would help me a lot if you give me the name of the one you used.
Here I have some screenshots of what appears in IMEI and SIM.

Try this thread :
https://forum.xda-developers.com/showthread.php?t=3379516
Sent from my SM-G935F using Tapatalk

Arachnorbit said:
Thank you! Do you know which Firmware I need to flash? Because I flashed a lot of firmwares and it didn't work! You would help me a lot if you give me the name of the one you used.
Here I have some screenshots of what appears in IMEI and SIM.
Click to expand...
Click to collapse
Download the latest firmware from https://updato.com (it's fast and reliable) then start in download mode, run odin with administrative privileges, select BL AP Modem and CSC (dont use home since we wish to clean fornat), and in odin uncheck auto reboot option, after the ODIN shows 'pass', disconnect the cord from pc, now you have to be very quick here since our battery is not removable, in order to shut down s7 edge from odin mode, all you have to do is press, volume down, volume up, home and power and as soon as it goes off connect the cord, the battery will show up and now it will be in charging state, after that disconnect the cord, (the phone is now clean fornatted and in off stage) and now boot into recovery to wipe data and cache using default recovery, then reboot phone and then log into your existing google account.
I know its tricky and maybe there's an ez way around it but this worked for me so I'm sharing

SOLUTION, thank you all for your answers!
AndyBury said:
Try this thread :
https://forum.xda-developers.com/showthread.php?t=3379516
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
I tried it at first instance but I could not because my Bootloader was updated to the "U2" version, what I did after that was search the Combination file updated to the U2 bootloader, after a long search I found it.
In resume, The solution is what the OP of that thread says but if you have the same problem like me with the Updated bootloader you need this file instead of the files that are shown there:
https://androidfilehost.com/?fid=890129502657582963
Thank you all! I hope this can help y'all that has this problem! :fingers-crossed:

i am same problem ,how to fix it?

help me

jed0123 said:
help meView attachment 4491615
Click to expand...
Click to collapse
You already fixed the problem I guess, you only need to flash the same firmware that your phone had before flashing the Combination file.

can not

Help
How to know what was my old firmware version? when I try to flash i get SW REV. CHECK FAIL. DEVICE: 2. Binary: 1
And I can't start phone because I'm getting FRP lock. Please help me?
Edit: I downloaded latest firmware and flashed it.

Same problem with s8+
amakuramio said:
Flash latest stock with csc, but skip bl section
Click to expand...
Click to collapse
I have the same problem with my S8+ SM-G955F
I flashed the latest firmware without BL....now my phone is working fine...but I dont have SIGNAL.. any help will be appreciated..

Moved
Thread moved to Questions and Answers.

hello.
im having the exactly same issue....
Im from Brazil, i was trying to install the stock rom then ill upgrade to android 8.0....(my android does not update becouse it from VIVO PROVIDER, my english sucks...hope you understand)
i open odin, select all files, of a stock rom ZTO G935F, then it just give me this error...
how can i fix it? i just want to install android 8.0 nougat =(
thx alot for trying help me!!!

i fixed my phone by skipping the booloader section...
you're a life saver brother...
Thank you
Regards

Arachnorbit said:
Hello guys!
I have a big problem with my S7 edge (G935F)... The problem begins when I forget to turn off the OEM security and then I did an update to my Magisk root... When I tried to reboot my phone it doesn't pass of the first logo image, meaning that I broke the "security", so I read about that and then I flashed a firmware, an official UK (BTU I guess) firmware and then I flashed TWRP via Odin to restore a nandroid that I did when I bought my phone... It restored the EFS partition/folder and when my phone reboots I had no network signal, no IMEI... I just tried everything (I hope not) and I can't give back my IMEI and my network signal... When I try to patch the certificate to recover my IMEI via Odin in the download mode it says: SW REV. CHECK FAIL. DEVICE:2. Binary:1
I don't know if I explained it because my English is too bad, but I tried, I know that someone else has the same problem than I because I saw it. Do you find the solution? I'm out of my country and I need it so much :crying:
Regards!
Click to expand...
Click to collapse
try custom ROMs and I'm sure they have update bootloader and modem use that and its work in my phone

jed0123 said:
can notView attachment 4491806
Click to expand...
Click to collapse
Hello, how did you solve it?

Help I keep getting SW REV. CHECK FAIL. DEVICE:3. BINARY:2 when trying to downgrade BL CP for G935W8