Related
Hi All,
Hope this is the right forum for this, but I was wondering if anyone has had any experience on loading the ROTO JME Firmware onto an Optus Tab, and if so, what were the improvements and were there any traps to watch out for considering the carrier lock?
I had a quick look through the ROTO JME Forum, and can't see much specific.
Regards,
bvd81
I have roto jme on the opus tab. One of the first things i did was remove the carrier lock (now works with three and telstra sims) search on this forum for info
I went straight from stock to the jm series firmware and its much much faster now just write down your internet and mms apn details as mine were wiped when upgrading.
Also if you use the optus apps make sure you only use roto upgrade package or it will wipe them.
Sent from my GT-P1000 using Tapatalk
Hi Ghostwalker9
Can you pease tell me how you flashed that ROTO JME to the Optus Tab?
I tried using Odin, but I guess it only recognises the Samsung Tab, so do I need the full version of clockworkmod?
Also, did you solve your optus sim problem with the JRE ROM?
Thanks
Greg
gregbull said:
Hi Ghostwalker9
Can you pease tell me how you flashed that ROTO JME to the Optus Tab?
I tried using Odin, but I guess it only recognises the Samsung Tab, so do I need the full version of clockworkmod?
Also, did you solve your optus sim problem with the JRE ROM?
Thanks
Greg
Click to expand...
Click to collapse
Did you install the usb drivers for the tab, and were you in downloading mode?
it should recognize the tab regardless of whats on it
Hi
Yep, had usb drivers installed, can access with adb. Not sure what download mode is though. Will research that one.
So when its in download mode should I use odin to flash the firmware?
Also, just so I'm clear when I say Optus Tab I mean the ZTE V9 tab that Optus has branded, not the Optus version of the Samsung Galaxy tab.
Thanks
Hey does anyone have the stock Optus (current) ROM backed up with all apn, sms, settings, if so please PM me with a link.
Thanks heaps
PEACE
Kosti
Optus ROM
Kostiz said:
Hey does anyone have the stock Optus (current) ROM backed up with all apn, sms, settings, if so please PM me with a link.
Thanks heaps
PEACE
Kosti
Click to expand...
Click to collapse
I would also appreciate such a link, as some initial glitch with Titanium backup caused me to lose some standard Optus apps prior to a Roto or Nandroid backup.
PLEASE: Take care if you try the batch option to "Integrate updates of system apps into ROM".
While I have no problems with all the great ROMs here, it would be good to go back to stock if I felt the need. Especially to finish off my initial Australian app subscription as I cannot find this app anywhere else.
Much appreciated if possible.
BTW: I am currently on Overcome v1.4.0 and like it very much. The Roto ROMs were also very good.
I'm pretty sure I've done a backup via titanium, but havent tried to restore from that, also i removed overcome 1.4 as thought i had wifi issues which when restored from OEM backup that OC1.4 performed it bricked it, so I had to use a full roto conversion which changed my modem & i assume pit as well.
Before (stock)
PDA : P1000XWJJ4
PHONE : P1000XXJID
CSC : P1000OPSJJ3
Build Time : 2010.10.16 20:35:06 KST
Changelist : 639474
Firmware 2.2
Kernel Version : 2.6.32.9
After roto rom
PDA : P1000XWJMI
PHONE : P1000XXJMA
CSC : P1000OXAJMG
Build Time : 2011.01.22 01:24:16 KST
Changelist : 869777
Hence why i want to bring it back to my OEM CSC & Modem if that's at all possible..
I cant even find the OEM ROM and Kies or Samsung Website?
Q&A for [ROM][I9505][XXUGNH7][18/09][SLIM][FAST] ► BHP ROM - V12 Q7 ◄
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][I9505][XXUGNH7][18/09][SLIM][FAST] ► BHP ROM - V12 Q7 ◄. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
cmkmagic said:
i have a slow charging problem using this rom
Click to expand...
Click to collapse
Go in Kernelsettings and change to 1900 mah:good:
same questions as any others rom freaks, when will new updates be released, want to know if this rom will get updates before i will first install it.
Bhp espelho
I love your ROM being, however the server drive always gives error when downloading, upa by MEGA or another server. Sorry my English'm BRAZIL and Usso the google translator. Congratulations on your work!
Download BHP
I can never download the rom by this provider, kindly upa by MEGA! congratulations for the work!
thnx bro ^_^
5.0
BHP 2.0 TDI
Quote:
Originally Posted by jomar_uk
Same problem sadly. @ISF
I noticed before I had a chance to select language it defaulted to german and the sim pin code option. I could not enter anything at all. Pressing back space did not take me to the language option just the sim code option appeared to be in a translucent box but not able to input anything.
Full wipe again and left options at default in aroma, same outcome. Jumped straight over language sekection to sim pin selection. Perhaps will try later on another version.
I had the same problem download the rom again and flash it and everything is working fine.
Ps I Kant reply in a developer forum jet
edp_ said:
BHP 2.0 TDI
Quote:
Originally Posted by jomar_uk
Same problem sadly. @ISF
I noticed before I had a chance to select language it defaulted to german and the sim pin code option. I could not enter anything at all. Pressing back space did not take me to the language option just the sim code option appeared to be in a translucent box but not able to input anything.
Full wipe again and left options at default in aroma, same outcome. Jumped straight over language sekection to sim pin selection. Perhaps will try later on another version.
I had the same problem download the rom again and flash it and everything is working fine.
Ps I Kant reply in a developer forum jet
Click to expand...
Click to collapse
Thanks for noticing me!
Sent from my GT-I9505 using Tapatalk
UPSM
@ISF Will you add UPSM in your 4.4.4 rom?
tooomins said:
@ISF Will you add UPSM in your 4.4.4 rom?
Click to expand...
Click to collapse
I will try, mate.
bhp rom 3.0 final
The best rom .. only thing i am missing are profiles .. )
Thanks for the great work!
Well, I already have the previous version installed on my device, I install this update with factory reset?
maxov777 said:
The best rom .. only thing i am missing are profiles .. )
Click to expand...
Click to collapse
https://www.dropbox.com/sh/dfxkt7d1dogv1xl/AACwgQfO61k4KnI-lH52ENnna?dl=0
Copy these 3 profiles into sdcard KTweaker/Profiles folder.
---------- Post added at 02:14 AM ---------- Previous post was at 02:12 AM ----------
manoelnsn said:
Thanks for the great work!
Well, I already have the previous version installed on my device, I install this update with factory reset?
Click to expand...
Click to collapse
Hello, thank you for the feedback!
Well, not really. You can flash it without Full Wipe.
I do recommend a Full Wipe since it fixes a lot of bugs and it's better to start with a clean everytime.
SD card , internal storage
Hello ..
i hope that this is stupid question .. but .. when i create folder in titanium backup on sd card , to store the backup apk , i can not see this folder in my computer when i use the stupid samsung access .. but i can see the folder with ES file explorer ..
what might be the problem ??
folder is readable, writable , no hidden ,
maxov777 said:
Hello ..
i hope that this is stupid question .. but .. when i create folder in titanium backup on sd card , to store the backup apk , i can not see this folder in my computer when i use the stupid samsung access .. but i can see the folder with ES file explorer ..
what might be the problem ??
folder is readable, writable , no hidden ,
Click to expand...
Click to collapse
Well, check if the folder has got a dot in front of it like so : .TitaniumBackup . If it does, delete the point by renaming the folder and you will be able to see it. BTW, I use Wi-Fi File Explorer to transfer files from my phone to pc. It's faster and more stable.
Here you got the app. Sorry for late reply, I'm busy with the high school. I would also like to thank you for your donation!
https://play.google.com/store/apps/details?id=com.dooblou.WiFiFileExplorer
all ok now
Somehow , somewhere ,, the folders started to appear on computer .. i tell you this Samsung .. crazy people ..
thanks for reply .. and good luck in school ..
No Network Signal after flashing
Hi good day!
Im a new user of SGS4 i9505.
My set-up before flashing this ROM is this:
MIUI 4.11.3 (4.4.2)
Original CSC: BTU
Firmware's CSC: TGY
Active CSC: BTU/TGY
CSC Country: Hongkong
Bootloader: I9505XXUFNAD
Baseband: I9505ZHUFNB3
PDA Version: I9505ZHUFNB3
Build number: KOT49H.I9505ZHUFNB3
On aroma installer, I selected XTE (Philippines) as CSC.
After flashing the rom and rebooting, I didn't have any network signal and the menu on Settings is greyed out.
Does it have something to do with the CSC I selected? Sorry for the noob question but I cant seem to figure it out.
arvinqd061914 said:
Hi good day!
Im a new user of SGS4 i9505.
My set-up before flashing this ROM is this:
MIUI 4.11.3 (4.4.2)
Original CSC: BTU
Firmware's CSC: TGY
Active CSC: BTU/TGY
CSC Country: Hongkong
Bootloader: I9505XXUFNAD
Baseband: I9505ZHUFNB3
PDA Version: I9505ZHUFNB3
Build number: KOT49H.I9505ZHUFNB3
On aroma installer, I selected XTE (Philippines) as CSC.
After flashing the rom and rebooting, I didn't have any network signal and the menu on Settings is greyed out.
Does it have something to do with the CSC I selected? Sorry for the noob question but I cant seem to figure it out.
Click to expand...
Click to collapse
Good day to you too. You have to update your bootloader to latest one, I think it's NK4, and also flash the latest modem. I have a tutorial on YouTube on how to update the modem. It's called how to fix Galaxy s4 Wi-Fi on my channel down below in my signature.
Updating the bootloader will most likely wipe all your SD card and data, so make a backup first.
You can get the latest bootloader and modem by searching on Google, Galaxy S4 Modem and enter the first link and find the latest one of them out there with a simple thread search. Flashing bootloader has the same process in Odin as the modem, but instead of selecting the. Tar in Phone section you put it on BL or Bootloader, it depends on your Odin version.
If you have further questions please let me know.
No Network Signal
ISF said:
Good day to you too. You have to update your bootloader to latest one, I think it's NK4, and also flash the latest modem. I have a tutorial on YouTube on how to update the modem. It's called how to fix Galaxy s4 Wi-Fi on my channel down below in my signature.
Updating the bootloader will most likely wipe all your SD card and data, so make a backup first.
You can get the latest bootloader and modem by searching on Google, Galaxy S4 Modem and enter the first link and find the latest one of them out there with a simple thread search. Flashing bootloader has the same process in Odin as the modem, but instead of selecting the. Tar in Phone section you put it on BL or Bootloader, it depends on your Odin version.
If you have further questions please let me know.
Click to expand...
Click to collapse
Even if the wifi is working, is that still my problem?
[Q&A] |ROM|★GOLDENEYE★|►XXUGNJ8◄|►45◄|Nov.10.14|
Q&A for |ROM|★GOLDENEYE★|►XXUGNJ8◄|►45◄|Nov.10.14|
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for |ROM|★GOLDENEYE★|►XXUGNJ8◄|►45◄|Nov.10.14|. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
posted Q in main, thanks.
I installed latest GE on my Domestic Unlocked Sprint Galaxy S4. Everything works with exception of GPS. GPS does not lock.
Also, is there way to install S5 messaging app on GE rom?
Sent from my SM-G900T using XDA Free mobile app
hello all,
I have a question !! I have a problem with hall sensor. my s4 goes after boot to s-view mode I can only see the big clock more I can not. I used rom 11 cm m9 I do not have that problem because the hall sensor is close. I hope someone can help me I would like to use this ROM. Thank you very much
Newly installed
Hi there,
I have a Telus I337MVLUAMG1 Canadian Samsung Galaxy S4 and everytime i sleep it, the data/signal turns off completely.
I've been trying to read around and i've been told to update my modem/baseband? How do i go about doing this?
Thanks!
issue with xposed and rebooting.
First off, let me say that i love this rom and thank you very much. Now my issue, that i am having is with xposed and wanam after the new update. Whenever i update the framework and reboot i get stuck on the samsung boot logo. I have tried clean installs with full wipes and dirty installs. As well as both ways with xposed enabled/disabled in aroma. Have you seen this happen before or know of a solution? Apart from that problem this rom is running extremely smooth. Thanks in advance
My specs
i337 ATT gs4
Safestrap
nj4 4.4.4 base
I flash the nj4 modules and the su zip
Installing this ROM for AT&T SGH-i337 MF3
Hi,
Can this ROM be installed on S4 AT&T SGH-i337 with MF3 build?
Regards,
Shahzad
Lollipop
I wanna see a Lollipop versions od this rom..It's amazing ! Great performance and battery life!Will the developer update this to lollipop?
Screen Mirroring
Has anyone been able to get screen mirroring working with this rom (Goldeneye v47)? So far I have tried the following with no luck: Re-flashing the full version of this rom (with all Samsung apks), and adding the following line to my build.prop file; wlan.wfd.hdcp=disable
help me
my phone is galaxy s4 i337 and staying at stock 4.2.2
i just rooted it and install TWRP recovery
i install this rom , but it cant go to home screen , it stop at "samsung galaxy s4 screen"
i dont know my ophone is safetrap or no (
Mk2
I have stock mk2, can I flash this directly after installing supersu and safestrap? I read I need to do something before flashing kitkat roms. I'm a bit confused please help
Great ROM, Thank you so much! It works on my NB1
goldeneye and 4.4.4 kernel
does goldeneye 49.2 work with NJ4 kernel?
note 3 tmobile keeps saying "unfortunately help has stopped"
Note 3 keeps saying "unfortunately help has stopped". Sense I deleted my Facebook, every time I try to download it it gets to the end and says "code -24 error". Please help. I'm a hair stylists and need my Facebook lol
i keep getting unfortunately, systemui has stopped everytime i connect the phone. it wont allow me to use usb debugging. is there any way to fix this? really love the roms ibastid makes. hope this isnt a bug
Goldeneye v46 rom
I search on the main, but I only found v48 and v49. I am looking KitKat based v46 please
Goldeneye rom for gti9500 - which Zip file?
Sorry to ask this, but when trying to flash the Goldeneye rom on my wife's S4 GT i9500 International, it seems the zip file is for the Gti9505 zip instead . if you select either link for gti9500 or gti9595 on the Goldeneye XDA thread, it takes you to the same file page with the rom zip for both phones. I have a gt i9500 and downloaded the GE-XXUGNK4-49.2.zip as I assumed it was an update from GE-XXUGNK4-49, but when I try to flash it on my GT i9500 it asks which variant to choose from with US/Canada carriers or the gt i9505. Am I correct in assuming I therefore need to download the GE-XXUGNK4-49 version, or is it the GE-XXUGNK4-48.zip that I need for the GT i9500?
Your help would be great.
New here, have lurked for ages before finally pulling the trigger and doing away with stock.
After an insane amount of confused reading, I somehow managed to root and get goldeneye on my canadian S4.
But it looks like I don't get 4g or LTE anymore. In reading and searching I see many references to a canadian LTE fix, (im on Fido) but I just can't find the dang link.
Can someone point me in the right direction ? Thanks
Using a Fido S4 sgh-i777m with GE 49.2 XXUGNK4
also - so much thanks to ib4stid for his rom work
im good with goldeneye 50
with goldeneye 50 i dont have any problems .. my data it's working fine is stable for me soo in stickin with the first release. i have a "i337m" rogers
AT&T Beta Testers - v50 working fine
I've flashed version 50 yesterday and it has been working beautifully so far.
I'll continue testing it and provide feedback if you need more ATT users
HI was wondering if anyone could point me in the right direction, Im after putting my s4 9505 back to a factory rom. its been rooted.
Cheers Stu/
We might be able to, but you give us no information to work with. Please post the following information:
1. Model Number GT-I9505
2. Android Version, found by going to Settings > More > About device.
3. Firmware Version (AP, CP, CSC), found by dialing *#1234# in the dialer or by installing Phone Info from the Play Store and running it.
4. Service Provider
5. Country
6. Is the phone rooted? (Yes/No) Yes
7. Is a custom ROM installed? (Yes/No, and the name of the ROM)
GT-i9505
5.0.2
vodafone
uk
custom rom
csc
Cheers Stu.
The latest firmware for your S4 is here. Make sure you have the drivers from Samsung installed, then follow the instructions on that page to install the ROM. Be aware that if you have problems after installing the ROM you'll need to install it again.
Cheers for your help is there anywhere else to download from the site is a bit slow?
Stu.
www.samsung-updates.com, but I don't believe it's going to be any faster. After all, you are dealing with a 1.5GB download.
ok cheers I'll stick with this one its got 50 mins left
Stu.
A big thank you for your help Strephon worked perfectly
All the best Stu.
Hello guys. I did some diggin but nothing handed. I want to flash an another Csc and radio instead of Firmware's. I tried Phone Info's csc changer and wanam's csc feature expert but no luck. Could we get the flashable zip, tar or etc? Im having an echo issue while voice calling on TeKxodus and Darthstalker rom which have T-Mobile Note5 Csc/Radio. I also tried @Misterjunky 's Audiofix-Tmo( many thanks). I think i need the csc/radio version which is stated in attachment.. Thanks.