My Nexus 4 charges at full power when plugged directly into a wall, A/C adapter in a car or to a power strip in a wall. However, it is quite erratic when plugged into APC UPSes (tried several of them). Most of the time, it indicates that its charging at USB strength and not A/C although sometimes if a unplug/replug it in enough times, it will show A/C charging. Worse still, a decent percentage of the time, it gets in this rapid charging/not charging or AC/USB charging mode which actually drains the battery. I've ruled out the power cord/adapter and it definitely only happens when connected to the UPS (both the battery backup side and non-backup side). Anyone else experienced a problem like this?
Related
so, here's the problem -
i got HTC sfift, as a gift, and it was used sometime. second time I recharged it - it fails.
as soon as i take out power cable - it goes dead. ok, maybe a second, but it shuts down.
when i load vista, and go in battery info - it says - 1% and charging. and it stays on 1% all the time.
i'm asuming it is faulty battery, but could it be something else ? maybe a power socket ? or maybe those small metal pins beneath the battery, that touch battery and the backside of the shift .. ?
anyone ?
it's the battery. Mine charges up to 50-60% and stays there and the max is slowly decreasing downward ...
My shift can't charge or power up off AC
Hi, I have 2 shifts, and one of them is being funny (and not the funny "ha ha" kind)
The Shift X9500 will not charge off of AC power.
I have done these tests & got these results:
- Battery in & AC plugged in = no charge light comes on & W7 says nothing about charging
- Battery out & AC in = no charge light & W7 says no battery (expected)
- Battery in & AC out = no charge light & W7 says not charging (expected)
I tested AC adapter on a Tekkeon external battery and it charges that external battery so the AC cord works.
A new test was done.
With battery out, and AC cord in, the unit will not turn on
With battery in (and some voltage on battery), and the AC cord in, the unit can turn on, and I can remove the battery (while still on) and the unit remains on, and the battery area says (No battery-AC Power)
So what would make the Shift not turn on with the AC cord in only?
And, what would make the AC cord not charge the battery?
I'm thinking it is related to a fuse/circut protector or something from the AC to the unit, but mostly, why can the Shift "Run on AC, but not turn on with AC only (i.e. requires a battery to turn on)
UPDATE:
I called HTC and the Shift is under warranty so they said to mail it in.
It seems that the issue is mostly eluding to the AC not charging the Battery is causing all the other issues...we will see!
Hi guys,
Suddenly facing a strange problem since last night.
My x10i was running out of charge & i connected to the comp to charge while i was working. I noticed the charging speed was extremely low, so i restarted the phone to see if it would help. Did not.
Thought there is some problem with the cable, used a different cable as well, but no use.
The slow charging had stopped and eventually the phone died.
Tried connecting to the socket & charging, still no use.
The red led blinks when i connect the phone to a charger via the usb or the socket.
needless to say the phone does not even boot up now, obviously for no charge...
any ideas wat maybe wrong or wat i could do ?
please advice
Have you tried to let it charge for some time in off mode? As long as your battery is not dead, and the phone get the right voltage through the USB connector it should charge in an "emergency mode". This is a slow way of charging, but allows for charging without any electronic circuits to monitor it, it is not the same as the charging screen that usually displays when you connect the phone while it is powered off. Usually when a phone is completely discharged it needs to be connected at least 15 min, sometimes a lot longer, before the electronics kicks in, and starts the speedcharging.
My best advise would be to connect it to the mains charger, or a USB port you KNOW supplies power. Some laptops cut down on the powersupply to the USB ports when they run on battery. Let it be connected for a long time (several hours), and then try to power it on again.
If that does not help three things can be wrong
1. Somewhere the USB connection is broken, either in the cable or in the connector on your phone (or on the PC's connector, but that is less likely).
2. The battery is dead, modern batteries contain circuits that actually disables the battery when any given parameters gets outside the defined limits. This is to prevent the battery catching fire. On some batteries this renders the battery useless, and you need a new battery.
3.) The mainboard of your phone is dead, and hence nothing works, can be ruled out if you can borrow a battery from someone to test if your phone works then.
I hope a good and long charge can sort out your problem, that is the easiest fix, and it is free.
Hi O_K,
well, i have been charging (or trying to) the phone since it died last night.
i have used different chargers & different modes of charge (through the system & the wall socket) - no joy at all.
the LED blinks red a couple of times when connected.
Very occasionally, the SONY ERICSSON logo (startup) shows on the screen & it switches off again, back to the blinking.
So charging for a long time & through different chargers has not helped.
gonna try a different battery now to see if that can help.
Thanks for your response!
well, tried switching chargers & batteries.
The problem seems to be with the charging unit on the phone (USB)
with any charger or battery, wen connected the led blinks (like wen the phone is charging), but there is no charge happening.
eventually the phone dies, even if charging
any ideas?
There is a thread some where in this forum for fixing the same problem you have...I don't remember the exact name of the thread..if I find it I'll post the link here..Anyways what the guy did was
-Pull the battery out and connect the charger till the led turns green.
-put in the battery now and charge the phone...
and I think that was it.
Hope it helped..
EDIT: Found the link.
http://forum.xda-developers.com/showthread.php?t=944322
Anyone else notice the phone randomly doesnt charge when plugging it into the computer?
The battery will say charging, the lock screen will say charging, but the battery screen will say not charging and the graph will show a green charging line but draining battery. Replugging the phone in fixes it. I havent had an issue with the wall charger.
Theres nothing wrong with the USB ports, it charged my other phone fine and it charges this phone when it works.
my N4 charges fast when I plug it to my laptop. I connect it to my USB 3.0 port..
PCs aren't designed to charge phones. It may work for a dumbphone with a 500 mAh battery, but it doesn't have the amperage to charge a smartphone efficiently. The charging adapter that comes with the phone is 1200 mA (milliamps), a computer USB port only provides 500 mA (on USB 2.0). On USB 3.0, it provides 900 mA, so it will charge faster, but not nearly as fast still as the 1.2 amp travel adapter.
On top of this, the phone is constantly using battery power while on, so it is very likely that when the screen is on and you are using the phone plugged into the computer, the phone is drawing power faster than the computer is charging it.
MusicMan374 said:
PCs aren't designed to charge phones. It may work for a dumbphone with a 500 mAh battery, but it doesn't have the amperage to charge a smartphone efficiently. The charging adapter that comes with the phone is 1200 mA (milliamps), a computer USB port only provides 500 mA (on USB 2.0). On USB 3.0, it provides 900 mA, so it will charge faster, but not nearly as fast still as the 1.2 amp travel adapter.
On top of this, the phone is constantly using battery power while on, so it is very likely that when the screen is on and you are using the phone plugged into the computer, the phone is drawing power faster than the computer is charging it.
Click to expand...
Click to collapse
That is not what Im talking about. It says charging everywhere except the battery screen where it says not charging, that is obviously a bug. A computer can power a phone fine anyways, they are made to be powered by a USB port.
idividebyzero said:
That is not what Im talking about. It says charging everywhere except the battery screen where it says not charging, that is obviously a bug. A computer can power a phone fine anyways, they are made to be powered by a USB port.
Click to expand...
Click to collapse
Mine says charging and shows charge icon when connected via USB
idividebyzero said:
That is not what Im talking about. It says charging everywhere except the battery screen where it says not charging, that is obviously a bug. A computer can power a phone fine anyways, they are made to be powered by a USB port.
Click to expand...
Click to collapse
I had this problem today. The battery was dying fast (Average for this one) and I had popped it into my stereos USB, The battery didn't show the charging sign.
WTF? So I switched to the "Cigarette lighter port" and with a different cable plugged that in. No go. Held in the power button to simulate a battery pull, Still didnt work.
Turned it off, Went back to work and three hours later getting ready to drive home i plugged it in. The phone was getting warm, But the battery charging sign never popped up. I turned it on and the left side (By the sim card) was getting ultra-hot but betterbatterystats said the battery was only feeling at around 101degrees (Normal for this small sun). A minute later it was highly uncomfortable to hold (Just near the sim card area), I thought the battery was going to catch on fire like those youtube videos.
I power cycled once again, the battery charging sign popped up and I breathed a huge sigh of relief. Seconds later the phone ****ing flipped its wig, It kept making the charger plugged in sound and vibrate every half second. I about had a stroke, Thinking it's going critical. ONE MORE POWER CYCLE, Everything is normal.
My earlier experience seemed similar to yours OP, Let me know if your phone melts your hand off and goes all bi-polar like mine did.
I'm having the same problem. It has nothing to do with a computer not being powerful enough to charge it, especially when they aren't even being used such as overnight. It has charged every other smartphone that I've used. It will say that it is charging on the lockscreen and on the settings pulldown but it will just constantly drain battery. I will put it on the charger before bed and wake up 8 hours later and it says it is at 86% with a steady decline in battery. This only happens when connected to my iMac and not when plugged into a wall outlet.
I wouldn't think USB 3.0 improves the charging speed at all, since the protocol still uses USB 2.0
I just remove all the cables and replace them. It seems to solve it.
Same with the AC adapter. I noticed sometime it would say charging USB when I switched. I just unplug everything and plug it back in and it goes back to normal.
/shrug
I havent noticed it getting warm, it just doesnt charge even though it knows its plugged in and is supposed to be charging. It works after replugging it in.
It also seems to charge abnormally slowly.
I wonder if the issue with the phone not working right with Nokia chargers (constantly disconnects and reconnects) is related to this. It may not have anything to do with the Qi standard because the phone just doesnt charge right period.
I own a Galaxy S2. I have tried it using for navigation many times only to find that the battery discharges fully within 2 hours even if the phone is connected to a car charger. I used to think may be its because my car charger doesn't provide enough current to maintain the charge. But recently I found out the culprit. After around 20 minutes of use, the phone battery starts heating up, and it stops charging. I verified this with CPU-Z. It clearly shows battery overheated, power supply connected and not charging.
I was wondering if S4 also has similar issue. Has anybody used it for more than 2 hours with Google Navigation continuously while connected to car charger?
unni_kmr said:
I own a Galaxy S2. I have tried it using for navigation many times only to find that the battery discharges fully within 2 hours even if the phone is connected to a car charger. I used to think may be its because my car charger doesn't provide enough current to maintain the charge. But recently I found out the culprit. After around 20 minutes of use, the phone battery starts heating up, and it stops charging. I verified this with CPU-Z. It clearly shows battery overheated, power supply connected and not charging.
I was wondering if S4 also has similar issue. Has anybody used it for more than 2 hours with Google Navigation continuously while connected to car charger?
Click to expand...
Click to collapse
The most I have used it for is about an hour and half, and while the phone did heat up, it did continue to keep charging while connected to my in-car charger (just a cheap one). I can't remember whether the charger was able to keep up with the discharge though, I think it did. I was driving in bright sunlight, so I had screen brightness on max throughout that time.
.Astiak said:
The most I have used it for is about an hour and half, and while the phone did heat up, it did continue to keep charging while connected to my in-car charger (just a cheap one). I can't remember whether the charger was able to keep up with the discharge though, I think it did. I was driving in bright sunlight, so I had screen brightness on max throughout that time.
Click to expand...
Click to collapse
I've found that the USB cable can have a big impact on the charging current. I had the same problem with my car charger not keeping the phone charged, even though I was using a 2A charger. When I changed the USB cable I managed to quadruple the charging current (from 300ma to 1200ma) and solved the problem (I measured the charging current using the Galaxy Charging Current Lite app).
HTH
itm said:
I've found that the USB cable can have a big impact on the charging current. I had the same problem with my car charger not keeping the phone charged, even though I was using a 2A charger. When I changed the USB cable I managed to quadruple the charging current (from 300ma to 1200ma) and solved the problem (I measured the charging current using the Galaxy Charging Current Lite app).
HTH
Click to expand...
Click to collapse
In my case, I believe it was not because of the charging current or cable. I was trying with a car charger capable of charging a laptop, using the wall charger and cable which came with the phone. When the mobile stopped charging, I checked in CPU-Z app. The app was clearly showing status as "power supply connected, not charging and battery overheated". If I unplug the USB cable and connect it back, it will start charging again!
To make sure that I didn't miss anything, I will try with the app you suggested.
Just to update: The Galaxy Charging Current Lite doesn't seem to work with my Galaxy S2. It doesn't show any value.
Hi,
Recently I've got my wireless charging pad (a well-known $27 generic wireless charger off eBay). Put my phone on, and it charged flawlessly and quickly enough. As soon as it got 100%, the charging stopped, and the LED on the pad turned green. No problem here. But, if I remove the phone and put it back immediately, while it is still at full capacity, the charging starts over and continues infinitely, as if it is connected to a wall charger. This concerns me, since the battery is being kept on trickle charging forever (about 20mA in screen-off mode according to Battery Monitor Widget), and the phone gets slightly warm. Besides, the charger unnecessary drains power from outlet.
I suspect, there's something wrong with communication between power receiver (phone) and transmitter (charging pad), since according to Qi standard, the power receiver should send an End-of-Power message to transmitter, as soon as the battery gets full, which in fact happens initially. But once the phone is removed and put back on the pad with battery still full, it seems, the message is not transmitted anymore, and that causes the pad to continue feeding power infinitely.
Could you please check your Nexus 4 with the wireless chargers you posses? I need confirmation, that this is indeed the phone's fault, and not the charger itself.
Follow these steps to possibly reproduce the issue:
1. If the phone is fully charged, play with it a little to drop the charge for 1-2%.
2. Put the phone on the charging pad and wait until charging process stops (your charger should probably notify that by some beep or LED color).
3. Quickly remove and put back the phone on the pad.
4. Observe what happens.
5. Report here.
Thank you!