Hi to all, i am stuck on lg logo, i can not enter in cwm, i can not enter in emergency mod on my l7 ( pull the VOL+ button, put the USB kabel in the PC and nothing). I do this: i am on v20d rooted, cwm, and i wanted to try AOKP, i flash v10k, enter i cwm wipe data, wipe cache partition, wipe dalvik cache, find aokp zip on my sdcard, ABORTED STATUS 7, again i wipe data, reboot and stuck on lg logo. I want to reflash, pull out battery, try to enter in emergency mode, but i cant:crying: please help, how to fix my l7? I hope that this is not hard brick
sorry for my english
Have this problem too
toske81 said:
Hi to all, i am stuck on lg logo, i can not enter in cwm, i can not enter in emergency mod on my l7 ( pull the VOL+ button, put the USB kabel in the PC and nothing). I do this: i am on v20d rooted, cwm, and i wanted to try AOKP, i flash v10k, enter i cwm wipe data, wipe cache partition, wipe dalvik cache, find aokp zip on my sdcard, ABORTED STATUS 7, again i wipe data, reboot and stuck on lg logo. I want to reflash, pull out battery, try to enter in emergency mode, but i cant:crying: please help, how to fix my l7? I hope that this is not hard brick
sorry for my english
Click to expand...
Click to collapse
I have this problem too! I tried the cyanogenmod rom, but now i'm staring at the cyanogenmod-logo....
I also tried getting into recovery or emergency mode, but the phone just refuses to jump into recovery.
you guys got the status 7 error because you didnt install the official cwm recovery from the rom manager app
caiejay said:
you guys got the status 7 error because you didnt install the official cwm recovery from the rom manager app
Click to expand...
Click to collapse
I googled "status 7 error", but i didn't get that message. I installed the zip-file from CWM and that went "right", then i rebooted the phone and then i got stuck. Hard reset (power, volume down, home) doesn't work....just goes back in normal reboot.
Oh and i have installed the latest recovery from the ROM manager app.
I made one mistake btw, forgot to factory reset and wipe data
robhaans said:
I googled "status 7 error", but i didn't get that message. I installed the zip-file from CWM and that went "right", then i rebooted the phone and then i got stuck. Hard reset (power, volume down, home) doesn't work....just goes back in normal reboot.
Oh and i have installed the latest recovery from the ROM manager app.
I made one mistake btw, forgot to factory reset and wipe data
Click to expand...
Click to collapse
where you found zip-file from CWM, how you install that?
toske81 said:
Hi to all, i am stuck on lg logo, i can not enter in cwm, i can not enter in emergency mod on my l7 ( pull the VOL+ button, put the USB kabel in the PC and nothing). I do this: i am on v20d rooted, cwm, and i wanted to try AOKP, i flash v10k, enter i cwm wipe data, wipe cache partition, wipe dalvik cache, find aokp zip on my sdcard, ABORTED STATUS 7, again i wipe data, reboot and stuck on lg logo. I want to reflash, pull out battery, try to enter in emergency mode, but i cant:crying: please help, how to fix my l7? I hope that this is not hard brick
sorry for my english
Click to expand...
Click to collapse
You need hard reset, try this several times and it will work http://www.hard-reset.com/lg-optimus-l7-p700-hard-reset.html
Edit. probably its softbrick, soo relax and u will find a way
Edit2. This is the official touch screen cwm. You will unzip it on the root of your pc ( C/ ) and do the 3 steps flash bootloader, flash recovery and reboot to recovery, it will reboot each time, and then u will not have status seven. http://hugefiles.net/mu8ta9a11mm8
Crazygrouzin said:
You need hard reset, try this several times and it will work http://www.hard-reset.com/lg-optimus-l7-p700-hard-reset.html
Edit. probably its softbrick, soo relax and u will find a way
Edit2. This is the official touch screen cwm. You will unzip it on the root of your pc ( C/ ) and do the 3 steps flash bootloader, flash recovery and reboot to recovery, it will reboot each time, and then u will not have status seven. http://hugefiles.net/mu8ta9a11mm8
Click to expand...
Click to collapse
thanks, man, but i cant do hard reset.I've tried many times but nothing happens, LED on the bottom dont lights up:crying::crying:
and file that you give me i cant save on my pc root, says I need permission to save on c. i know i'm a noob and i probably boring you but I'm desperate and do not know how to revive ma l7.
toske81 said:
thanks, man, but i cant do hard reset.I've tried many times but nothing happens, LED on the bottom dont lights up:crying::crying:
and file that you give me i cant save on my pc root, says I need permission to save on c. i know i'm a noob and i probably boring you but I'm desperate and do not know how to revive ma l7.
Click to expand...
Click to collapse
This is the only 2 ways to save your phone, Try many time hard reset, If not then pull out the battery and conect to pc, then hold power and volume up button together, When u unbrick it i will show u how to unzim the file
Edit. Also try this http://www.youtube.com/watch?v=71hsaa9bsf4
Crazygrouzin said:
This is the only 2 ways to save your phone, Try many time hard reset, If not then pull out the battery and conect to pc, then hold power and volume up button together, When u unbrick it i will show u how to unzim the file
Click to expand...
Click to collapse
i do this:
Press vol-and then press the Power button when the light turns on at the bottom of the screen, click on the right side and continue to hold. Now when the phone vibrated not let go of the Power button but continue to keep the vol-and right-hand side. you get the picture and then android will be reset. is now ready.
and i am i cwm v6.0.2.8, and i wipe data and i have error mounting /sdcard/.android_secure! skipping format....data wipe complete. i reboot and i stuck on lg logo
toske81 said:
i do this:
Press vol-and then press the Power button when the light turns on at the bottom of the screen, click on the right side and continue to hold. Now when the phone vibrated not let go of the Power button but continue to keep the vol-and right-hand side. you get the picture and then android will be reset. is now ready.
and i am i cwm v6.0.2.8, and i wipe data and i have error mounting /sdcard/.android_secure! skipping format....data wipe complete. i reboot and i stuck on lg logo
Click to expand...
Click to collapse
Do like in first video or like in this video, it must be one of 2 http://www.youtube.com/watch?v=WA8mXvloUXw
This is the corect way for hard reset
Edit. Take out your sd card when will do this, just in case
i tried both ways and i enter in cwm!!! why?
toske81 said:
i tried both ways and i enter in cwm!!! why?
Click to expand...
Click to collapse
You are in cwm? Strange, but its ok, so, wipe data, then wipe cache, then go in advance, wipe dalvick cache and the fix permisions. then reboot, and tell me what hapens
Edit. And if u finally unbrick it then u have 2 ways to install oficial cwm, first way is to instal rom manager from playstore and second way is to open your pc like adminastor and ectract the zip file i gave u in c/ ( i did it by this way)
toske81 said:
where you found zip-file from CWM, how you install that?
Click to expand...
Click to collapse
First one came with a kdz- file, when i rooted the phone. Dont know the exact location.
On the rooted phone i installed rom manager and there i installed a new recovery.
Btw, now when i hard reboot i only get the LG logo
Edit: now i get CM-logo again.
But i can only hard reset if i press power, volume and menubutton (physical). I tried to do the same as the vids here, several times. But no success.
Crazygrouzin said:
You are in cwm? Strange, but its ok, so, wipe data, then wipe cache, then go in advance, wipe dalvick cache and the fix permisions. then reboot, and tell me what hapens
Edit. And if u finally unbrick it then u have 2 ways to install oficial cwm, first way is to instal rom manager from playstore and second way is to open your pc like adminastor and ectract the zip file i gave u in c/ ( i did it by this way)
Click to expand...
Click to collapse
ok.thenks.i try tonght, i must go to work
robhaans said:
First one came with a kdz- file, when i rooted the phone. Dont know the exact location.
On the rooted phone i installed rom manager and there i installed a new recovery.
Btw, now when i hard reboot i only get the LG logo
Edit: now i get CM-logo again.
But i can only hard reset if i press power, volume and menubutton (physical). I tried to do the same as the vids here, several times. But no success.
Click to expand...
Click to collapse
What u are trying to do? Go in cwm wipe again data, cache, dalvick cache, fix permision, and then reflash again the rom
toske81 said:
where you found zip-file from CWM, how you install that?
Click to expand...
Click to collapse
Now i remember: I installed L7 - V10K_00 | ROOT | CWM | Unlocked Bootloader | By Homero
---------- Post added at 02:31 PM ---------- Previous post was at 02:21 PM ----------
Crazygrouzin said:
You need hard reset, try this several times and it will work
Edit. probably its softbrick, soo relax and u will find a way
Edit2. This is the official touch screen cwm. You will unzip it on the root of your pc ( C/ ) and do the 3 steps flash bootloader, flash recovery and reboot to recovery, it will reboot each time, and then u will not have status seven.
How do i do the second method? I saved the file to c, then i see two exe-files, adb and fastboot. Which one? I tried the batfiles, but they say wait for device...
Click to expand...
Click to collapse
robhaans said:
Now i remember: I installed L7 - V10K_00 | ROOT | CWM | Unlocked Bootloader | By Homero
---------- Post added at 02:31 PM ---------- Previous post was at 02:21 PM ----------
Crazygrouzin said:
You need hard reset, try this several times and it will work
Edit. probably its softbrick, soo relax and u will find a way
Edit2. This is the official touch screen cwm. You will unzip it on the root of your pc ( C/ ) and do the 3 steps flash bootloader, flash recovery and reboot to recovery, it will reboot each time, and then u will not have status seven.
How do i do the second method? I saved the file to c, then i see two exe-files, adb and fastboot. Which one?
Click to expand...
Click to collapse
This is how u install official cwm with touch screen, The .bat files.
Did u unbrick your phone? Did u pass status 7 error? if yes u dont need this
Did u pass lg logo?
Click to expand...
Click to collapse
Was Itudyh
Crazygrouzin said:
robhaans said:
Now i remember: I installed L7 - V10K_00 | ROOT | CWM | Unlocked Bootloader | By Homero
---------- Post added at 02:31 PM ---------- Previous post was at 02:21 PM ----------
This is how u install official cwm with touch screen, The .bat files.
Did u unbrick your phone? Did u pass status 7 error? if yes u dont need this
Did u pass lg logo?
Click to expand...
Click to collapse
When i tried the bat files, i only had the LG logo and the laptop didnt recognize the phone. The bat files did nothing. Later i rebooted and i got to CMlogo again, but i didnt try the bat-files. But i did try the LG mobile support tool, and that program did find the phone. Unfortunately, it said it was an unsupported modell...
I will try the bat-file with the phone on CM-logo this evening.
I dont get any error-message when i reboot, just LG-logo and then CM-logo. It just spins and nothing more. I just cant get into CWM-recovery...
Thanks for thinking with me!
Click to expand...
Click to collapse
robhaans said:
Crazygrouzin said:
When i tried the bat files, i only had the LG logo and the laptop didnt recognize the phone. The bat files did nothing. Later i rebooted and i got to CMlogo again, but i didnt try the bat-files. But i did try the LG mobile support tool, and that program did find the phone. Unfortunately, it said it was an unsopported modell...
I will try the bat-file with the phone on CM-logo this evening.
I dont get any error-message when i reboot, just LG-logo and then CM-logo. It just spins and nothing more.
Thanks for thinking with me!
Click to expand...
Click to collapse
The only thing u need is to go in cwm and wipe everything, And then reflash again the rom, U dont need this, This file is for the other user. This tool is to instal cwm, but u need to wipe everything, But u can try it on lg logo, Because one user unbrick it this way, but as i said, u need to wipe everything and then reflash the rom, This happend many times with me at the beggining and i always fix it this way. I hope u will unbrick it soon
Click to expand...
Click to collapse
Crazygrouzin said:
robhaans said:
The only thing u need is to go in cwm and wipe everything, And then reflash again the rom, U dont need this, This file is for the other user. This tool is to instal cwm, but u need to wipe everything, But u can try it on lg logo, Because one user unbrick it this way, but as i said, u need to wipe everything and then reflash the rom, This happend many times with me at the beggining and i always fix it this way. I hope u will unbrick it soon
Click to expand...
Click to collapse
Problem is that no button combination gets me in recoverymode, so i cant wipe and reflash. I cant get past cyanogen-logo. Is it possible to wipe from a pc?
Click to expand...
Click to collapse
Related
I am trying to change into CyanogenMod-5 for Nexus One.
I've unlocked the bootlader and installed Amon_RA's recovery image.
Also I copied the ROM to my sdcard and wiped before I tried to flash.
The trouble only appears when I have to reboot into recovery mode. When I press recovery the start up X sign appears but only to be followed by the little andriod man next to a !warning sign.
What am I doing wrong?
Radissen said:
I am trying to change into CyanogenMod-5 for Nexus One.
I've unlocked the bootlader and installed Amon_RA's recovery image.
Also I copied the ROM to my sdcard and wiped before I tried to flash.
The trouble only appears when I have to reboot into recovery mode. When I press recovery the start up X sign appears but only to be followed by the little andriod man next to a !warning sign.
What am I doing wrong?
Click to expand...
Click to collapse
Redownload and flash the recovery image.
Have tried a couple of times (well that was with the same download but is said "OKAY" every time).
Radissen said:
I am trying to change into CyanogenMod-5 for Nexus One.
I've unlocked the bootlader and installed Amon_RA's recovery image.
Also I copied the ROM to my sdcard and wiped before I tried to flash.
The trouble only appears when I have to reboot into recovery mode. When I press recovery the start up X sign appears but only to be followed by the little andriod man next to a !warning sign.
What am I doing wrong?
Click to expand...
Click to collapse
I think you have to hold down Volume up and power button or volume down and power button. One of these two should fix it for you.
When I do that i come to this screen
IT only says something like:
Reboot system now
apply update.zip
wipe data/factory reset
wipe cache partition
E:Can't open/cache/recovery/command
It's working EXACTLY like this for me...
Unfortunately it "should" work fine when using Fastboot, but won't work from Recovery directly via the bootload.
In other words... Try to do the "Fastboot boot recovery.img" and see if you have success... Mine works perfectly well when done this way. (Note: Use the proper file you have for the recovery image... I'm assuming you know how to properly run Fastboot?)
Radissen said:
When I do that i come to this screen
IT only says something like:
Reboot system now
apply update.zip
wipe data/factory reset
wipe cache partition
E:Can't open/cache/recovery/command
Click to expand...
Click to collapse
That looks like the original recovery, are you sure you installed the amon_ra recovery correctly??
Well I followed this guide
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_Nexus_One_Firmware_to_CyanogenMod
and it did says OKAY on my PC. But I'm not really sure how it is supposed to look when it's been installed.
So I redownloaded everything a I got the phone rooted and had no problem installing the new ROM and addon. But now my Nexus one i stock doing this over and over again
Forgot to wipe berfore...
NOW IT WORKS PEFECT!
Thank you so much
Yep, make sure you make a nandroid backup. And whenever you have a bootloop its most likely that you forgot to wipe.
Cheers!
tontonHD said:
Yep, make sure you make a nandroid backup. And whenever you have a bootloop its most likely that you forgot to wipe.
Cheers!
Click to expand...
Click to collapse
S*** forgot to do a nandriod backup. Is that a problem?
Radissen said:
S*** forgot to do a nandriod backup. Is that a problem?
Click to expand...
Click to collapse
No, its not you can make a backup whenever you want. In my situation I did a backup of Cyanogen 5.0.2 with all my apps and settings and another one of MoDaCos Desire rom so it basically takes me 3 minutes to switch between roms
I am using 2.3.5 GT-I9100_XEN_I9100XWKJ3_I9100XENKJ1_I9100XXKI4
i am trying to install MIUI 1.11.18 mobile cannt install it. and restarts after copying files... nothing happen pls any one have point to point guide or video link.... thanks ....
Download the official rom, start your phone in recovery mode by pressing power home and volume up your phone must be rooted for this, then in recovery mode clear user data, cache and dev cache, then select install zip from sd go to your rom and install it restart the phone and you are ready to go
Sent from my GT-I9100 using Tapatalk
already done that... but can u please share links as well.... thanks in advance...
asif.malick said:
already done that... but can u please share links as well.... thanks in advance...
Click to expand...
Click to collapse
You must also format system in mounts and storage to make it work,
So wipe data, clear cache and dalvik cache, format system and flash the miui rom TWICE IN A ROW (really, not kidding). Let it boot and than reboot again
---------- Post added at 07:20 PM ---------- Previous post was at 07:15 PM ----------
Tell us what you have done and its easier for us to point out what is missing. There are dozen ways thing can go wrong
pcboyy said:
Tell us what you have done and its easier for us to point out what is missing. There are dozen ways thing can go wrong
Click to expand...
Click to collapse
sir i have followed the following steps.
1. install 2.3.5 from this website
http://www.cellphone-tutorial.com/2011/11/i9100xwkj3-android-235-gingbread.html
2. root it from
http://forum.xda-developers.com/showthread.php?t=1103399
but a yellow button is shown after rooting...
then after that by going into recovery mode, install update from sdcard...
followed the same way by which update galaxy s i9000...
then tried to install all these three versions
MiUI Android SGS2 1.11.11 RTL-sign.zip
miuiandroid_SGS2-1.11.18.zip
miuiscotland_I9100-1.11.18.zip
it just always resets.. nothing else happens...
asif.malick said:
sir i have followed the following steps.
1. install 2.3.5 from this website
http://www.cellphone-tutorial.com/2011/11/i9100xwkj3-android-235-gingbread.html
2. root it from
http://forum.xda-developers.com/showthread.php?t=1103399
but a yellow button is shown after rooting...
then after that by going into recovery mode, install update from sdcard...
followed the same way by which update galaxy s i9000...
then tried to install all these three versions
MiUI Android SGS2 1.11.11 RTL-sign.zip
miuiandroid_SGS2-1.11.18.zip
miuiscotland_I9100-1.11.18.zip
it just always resets.. nothing else happens...
Click to expand...
Click to collapse
You should wipe cache, dalvik cache, wipe data/factory format, and in mount and storage format system. Then flash Miui twice in a row, reboot, boot up and reboot again. That should do it. Miui has different system than Samsung
gee2012 said:
You should wipe cache, dalvik cache, wipe data/factory format, and in mount and storage format system. Then flash Miui twice in a row, reboot, boot up and reboot again. That should do it. Miui has different system than Samsung
Click to expand...
Click to collapse
before installing miui???
Yes, do the above steps and miui will get installed. Flash miui twice in a row without rebooting!
gee2012 said:
Yes, do the above steps and miui will get installed. Flash miui twice in a row without rebooting!
Click to expand...
Click to collapse
same happened... it just restarts.....
asif.malick said:
same happened... it just restarts.....
Click to expand...
Click to collapse
do you have usb debugging enabled in applications?
---------- Post added at 09:35 PM ---------- Previous post was at 09:32 PM ----------
gee2012 said:
do you have usb debugging enabled in applications?
Click to expand...
Click to collapse
Restarts , you mean bootloop or startscreen with the S on it?
gee2012 said:
do you have usb debugging enabled in applications?
---------- Post added at 09:35 PM ---------- Previous post was at 09:32 PM ----------
Restarts , you mean bootloop or startscreen with the S on it?
Click to expand...
Click to collapse
no usb debugging is not enabled and
yes. it goes into unlimited time bootloop....
asif.malick said:
no usb debugging is not enabled and
yes. it goes into unlimited time bootloop....
Click to expand...
Click to collapse
Oke, go back in recovery mode and wipe data/factory reset, wipe cache and dalvik cache and reboot
gee2012 said:
Oke, go back in recovery mode and wipe data/factory reset, wipe cache and dalvik cache and reboot
Click to expand...
Click to collapse
it dont went into recovery mode.. just simply remains in bootloop...
asif.malick said:
it dont went into recovery mode.. just simply remains in bootloop...
Click to expand...
Click to collapse
pull out the battery, wait 15 seconds, reinsert it. Go in recovery mode (volume up + Power + menu button). Wipe data factory reset, cache and dalvik cache and reboot
gee2012 said:
pull out the battery, wait 15 seconds, reinsert it. Go in recovery mode (volume up + Power + menu button). Wipe data factory reset, cache and dalvik cache and reboot
Click to expand...
Click to collapse
same s... happened.. GOD knows what is happening ... now my custom binary download is showing 13 COUNTS....
asif.malick said:
same s... happened.. GOD knows what is happening ... now my custom binary download is showing 13 COUNTS....
Click to expand...
Click to collapse
Do you have a working backup in recovery? Try to restore that, if not it`s best to flash back to stock rom for now. You can always root it and try again. For the binary count you should buy a jig to reset the counter.
Try to read about rooting and always enable usb-debugging when flashing custom roms/kernels
Look in Intratech`s thread for your stock rom, he almost has them all
Good luck
gee2012 said:
Do you have a working backup in recovery? Try to restore that, if not it`s best to flash back to stock rom for now. You can always root it and try again. For the binary count you should buy a jig to reset the counter.
Try to read about rooting and always enable usb-debugging when flashing custom roms/kernels
Look in Intratech`s thread for your stock rom, he almost has them all
Good luck
Click to expand...
Click to collapse
thanks for your time gee2012... and one thing more.. can u pls share a tutorial for sgs 2 or u can make 1 it for new users like me .. bundle of things...
if some else have solution pls share.
I tried MIUI and it stuck on boot screen, i read somewhere certain Roms need flashing twice so flash it then instead of rebooting flash it again then reboot
Sent from my GT-I9100 using XDA App
Hey,
My defy freezes after installing http://forum.xda-developers.com/showthread.php?t=1161110 this Rom in GB+ Version on my defy. I previously had cm7 2.3.7 on it. I forgot to delete all user files, and as i said now it freezes @ bootlogo. If i press vol down, and power i get to the recovery logo, but tapping in the bottem right or anywhere on the screen does not help.
what can i do?
GodspeedHD said:
Hey,
My defy freezes after installing http://forum.xda-developers.com/showthread.php?t=1161110 this Rom in GB+ Version on my defy. I previously had cm7 2.3.7 on it. I forgot to delete all user files, and as i said now it freezes @ bootlogo. If i press vol down, and power i get to the recovery logo, but tapping in the bottem right or anywhere on the screen does not help.
what can i do?
Click to expand...
Click to collapse
Well if u can access recovery download another rom and flash it (wipe data/cache before flashing) our if you can't access recovery try with Odin to go back to stock
Press thanks if I helped you
Djole-97 said:
Well if u can access recovery download another rom and flash it (wipe data/cache before flashing) our if you can't access recovery try with Odin to go back to stock
Press thanks if I helped you
Click to expand...
Click to collapse
I can acces motorola recovery using the middle volume button. Wiping Data and Cache didnt help me. Flashing Cyanogenmod as Update.zip doesnt work, this error occours:
Installation aborted
E: Cant mount CACHE:recovery/log
GodspeedHD said:
I can acces motorola recovery using the middle volume button. Wiping Data and Cache didnt help me. Flashing Cyanogenmod as Update.zip doesnt work, this error occours:
Installation aborted
E: Cant mount CACHE:recovery/log
Click to expand...
Click to collapse
flash the stock sbf,and start from scratch !!
Hi, i flashed my phone with custom rom and my phone keep restarting everytime i started it. And i cant use recovery (twrp) because it restarts in recovery mode too, it can go only in download mode.. please tell me its not hard brick that cant be fixed in software. Thanks
Well if it only restarts in download mode the only thing you can do is to return to stock. Download the latest firmware of your device variant and flash it via Odin. I suggest you to flash a lollipop one and then update to Marshmallow if you want.
kuntlsx said:
Hi, i flashed my phone with custom rom and my phone keep restarting everytime i started it. And i cant use recovery (twrp) because it restarts in recovery mode too, it can go only in download mode.. please tell me its not hard brick that cant be fixed in software. Thanks
Click to expand...
Click to collapse
Yo!
First, calm down because its not hard brick You can fix it and its quite easy.
Follow these steps:
1) Download and install the proper DRIVERS for your phone (it should be done automatically when you connect the phone to the PC).
2) The phone should have at least 50% battery!
3) Download ODIN program. I'm using v3.09
4) Download the stock rom for J500FN from here: MEDIAFIRE <--- click . This is a firmware which i have uploaded in past, for faster download and is based on 5.1.1 lollipop.
If you want other firmware, then check on SAMMOBILE or other website.
You can use SamFirm to download firmwares faster: http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 (even if says deprecated, it works fine).
5) Extract ODIN archive and run it (.exe file).
6) Extract the stock rom .zip archive and you will get a xxxxxxxxxxxxxxxx.tar.md5 file (xxxxxxxxxx= name of the stock rom)
7) Restart the phone in DOWNLOAD MODE, by holding Power + Home + Volume down buttons same time.
A "Warning" window will apear, now press the "vol up" button to get "DOWNLOAD MODE" and conect the phone to the pc
If the ODIN see the phone, on the "ID:COM"line(midle-left) you will see "0:[COMx]"(x= port number)
8) On the ODIN press "AP" button, a window will apear, search in it the location of the xxxxxxxxxxxxxx.tar.md5, select it and open.
9) Now press "START" button and wait until ODIN finish.
When it finish, the phone will boot automatically and in ODIN will apear a big green PASS.
10) Phone is booting. Yayyy!
Click to expand...
Click to collapse
Here is a Q&A (questions and answers) thread with useful and basic informations: http://forum.xda-developers.com/galaxy-j5/how-to/galaxy-j5-qa-thread-galaxy-j5-series-t3382922 .
#Henkate said:
Yo!
First, calm down because its not hard brick You can fix it and its quite easy.
Follow these steps:
Here is a Q&A (questions and answers) thread with useful and basic informations: http://forum.xda-developers.com/galaxy-j5/how-to/galaxy-j5-qa-thread-galaxy-j5-series-t3382922 .
Click to expand...
Click to collapse
I just tried that and now im stuck on Samsung logo loop
kuntlsx said:
I just tried that and now im stuck on Samsung logo loop
Click to expand...
Click to collapse
Now flash TWRP and go to recovery and wipe data, cache and dalvik cache. Then the bootloop should be gone.
If you still have a bootloop after doing this, then try to reflash the stock rom.
#Henkate said:
Now flash TWRP and go to recovery and wipe data, cache and dalvik cache. Then the bootloop should be gone.
If you still have a bootloop after doing this, then try to reflash the stock rom.
Click to expand...
Click to collapse
Just got this when tried to wipe
E:Unable to mount storage.
E:Unable to mount '/data'
kuntlsx said:
Just got this when tried to wipe
E:Unable to mount storage.
E:Unable to mount '/data'
Click to expand...
Click to collapse
Huh. Try to mount them at Mount option in recovery.
#Henkate said:
Huh. Try to mount them at Mount option in recovery.
Click to expand...
Click to collapse
I got same error, i cant check checkbox for /data
Unable to mount '/data'
kuntlsx said:
I got same error, i cant check checkbox for /data
Unable to mount '/data'
Click to expand...
Click to collapse
Then reflash stock rom and reboot. If you get bootloop, go to recovery ( STOCK recovery) and wipe data and cache, but keep in mind that when you are wiping data, it may wipe the whole internal memory, not just data. It happened to me on some newer firmware. And then reboot again.
#Henkate said:
Then reflash stock rom and reboot. If you get bootloop, go to recovery ( STOCK recovery) and wipe data and cache, but keep in mind that when you are wiping data, it may wipe the whole internal memory, not just data. It happened to me on some newer firmware. And then reboot again.
Click to expand...
Click to collapse
Thank u so much, it works! :highfive::highfive:
I've recently updated my phone to the unofficial CM 13 , and now that the official android 6.0 for my phone is released I wanted to update to it. The problem is that the official way of updating is holding both volume buttons and power button while phone is turned off, but that takes me to the recovery of the installed CM13. I tried flashing the stock recovery, and the furthest i got was that the installation began , but got stuck at 0 %.
Note that when I tried installing CM13 , there was a problem with the package identifying my device, so i searched and found out that i can skip the device check, once i did that i could install CM13, but when i go to about phone in settings , i find that device type is unkown.
Install the custom CWM recovery then wipe davlik cache, power off phone and then try to flash stock ROM
kamilb365 said:
Install the custom CWM recovery then wipe davlik cache, power off phone and then try to flash stock ROM
Click to expand...
Click to collapse
How can I flash the stock rom with CWM , because I believe it's only flashable with the stock recovery , and I tried flashing it with the stock recovery but it didn't work .
You dont need the stock recovery. Just boot into CWM or TWRP and wipe cache & davlik cache.
Then power off the phone. When its off hold the power button and the + and - buttons.
When the Huawei Ascend logo shows up let go of the power button and keep holding the + and - buttons until the installation screen shows up.
Take off the case off the phone if you have any.
kamilb365 said:
You dont need the stock recovery. Just boot into CWM or TWRP and wipe cache & davlik cache.
Then power off the phone. When its off hold the power button and the + and - buttons.
When the Huawei Ascend logo shows up let go of the power button and keep holding the + and - buttons until the installation screen shows up.
Take off the case off the phone if you have any.
Click to expand...
Click to collapse
Whenever I try to do that it gives me an error, the error doesn't even stay enough time to be read.
Just to add that you should have an apdate.app file in folder called dload on external SD card for you to be able to flash it back to stock if you have done that already not sure ??
Sparko612 said:
Just to add that you should have an apdate.app file in folder called dload on external SD card for you to be able to flash it back to stock if you have done that already not sure ??
Click to expand...
Click to collapse
yeah , its not my first time flashing a rom
You might as well update to CM14.1 if you can't go back to EMUI lol
Or the version you're trying to flash is not compatible with your device?
I have same problem. I have Kitkat in the phone. I install TWRP recovery.. I want oficial Lolipopstock rom. Update via mobile menu - manualy localy update - dlan folder - inside Dload is LOLIPOP stock rom, mobile reset and go to the TWRP recovery.. again again.. Dalvik chache and chache has been deleted, but still same problem. I cant upgrade my phone to the stock rom Lolipom via Local upodate
EDIT: I must deleted all.. ceche, dalvik chache, system.. all without sd card, there was dload folder with update with kitkat stock rom.. I turned my phone off then I holded power buton vol + and -. Instalation complete
Any solution? I also have cwm Cnmode 12.1 rom and want to be able to flash stock rom 6.0. problem is I dont know how to get to stock recovery.. .. SWM recovery does not recognize .app extension for flashing and stock rom is in .app extension please help. G7 L03
Thank you
Some one please help
I have installed CWM recovery and Can not go back to stock rom, I want to go back to stock rom and maybe update to Marshmallow 6. Phone is unlocked..
Can someone give me hint how to do it? trough CWM I cant flash stock .APP only Zip but stock is in APP format
Maspindzeli said:
I have installed CWM recovery and Can not go back to stock rom, I want to go back to stock rom and maybe update to Marshmallow 6. Phone is unlocked..
Can someone give me hint how to do it? trough CWM I cant flash stock .APP only Zip but stock is in APP format
Click to expand...
Click to collapse
Put the Update.app in a dload folder and turn off the phone.
Then hold power and the + and - buttons until installation begins.
kamilb365 said:
Put the Update.app in a dload folder and turn off the phone.
Then hold power and the + and - buttons until installation begins.
Click to expand...
Click to collapse
I have custom recovery, I need to get back to stock recovery to do that... Custom recovery does not see update.app ... Please help . Custom recovery is looking for Zip file and cant see .app file at all...
Maspindzeli said:
I have custom recovery, I need to get back to stock recovery to do that... Custom recovery does not see update.app ... Please help . Custom recovery is looking for Zip file and cant see .app file at all...
Click to expand...
Click to collapse
You do not need stock recovery......
Just do what I told you in the previous post.
kamilb365 said:
You do not need stock recovery......
Just do what I told you in the previous post.
Click to expand...
Click to collapse
I have done it and tried many times ... screen takes me to custom recovery every time I do that.. I do that and I get to custom recovery and thats it... nu update... I have copied update app to dload folder and have tried like 15 times... I get to stock recovery (( it does not update
Maspindzeli said:
I have done it and tried many times ... screen takes me to custom recovery every time I do that
Click to expand...
Click to collapse
What recovery you using?