so i tried installing it and when the phone resets it just bootloops over and over again. it passes the motorola icon and then itll restart. I can reach the 2ndint but thats it. I rooted the phone and installed 2ndint on stock froyo. Then i put the files in the sd card and installed them through recovery. of course factory resetting etc. I dont know what to do at this point. Can anyone give me some instructions as to how to do this? Thanks
Related
Okay I've never read such a weird explanation on any thread in this forum.
Btw, I recently flashed InDroid 4.3. Less than a week ago.
My phone was running perfectly, but my google account linked with my phone was not what I wanted it to be. So I added another account and my phone said that to delete my previous account I had to do a factory reset.
So I deleted my older backup that I had created using Titanium Backup (when I was using stock ROM) and I created a new backup.
So I held down the power button and tried to get into recovery. But my phone just got stuck at the "samsung i5801" screen. I let it be for 10-15 minutes but it won't go beyond that. So I re-inserted the battery, and tried to get into recovery again. Didn't work.
Then I tried to just start my phone in normal mode, but still it just got stuck at the i5801 screen. I removed the sim card, SD card and tried, still stuck at the same screen.
Then I tried to get into downloading mode, which (thank god) worked.
Now I know the logical thing to do is just to flash a new ROM but my questions are :
a- WTF happened?!??!?!?!
b- since I can't get into recovery or normal mode, how do I reset factory settings / clear cache? And if I don't do all that, will flashing be successful? and safe?
btw, I'd like to continue with InDroid until Kyrillos 6.0 is perfectly stable.
-That happens frequently with indroid.. main cause could be the filesystems..
-flash kyrillos v6 its pretty much stable..
-Once you flash a new rom you'll be able to boot into recovery..
-Remove sdcard while flashing once done insert sdcard and wipe data n cache from recovery..
Hi guys,
I'm new with all this rom stuff. But right now I'm using CyanogenMod and I wanted to go back to stock so I found omega rom and I am having problems trying to install this rom. What happens when I install it is that it goes though all the processes then it gets to the end where I can reboot it but then it says I don't have my phone rooted when I know it is already rooted. So it asked if I want to install SuperSU again so I did and it just goes to the downloading screen and doesn't do anything. I tried it again without install SuperSU but it's still the same thing. I have tried full wiping the device (wipe everything) but I still get the same thing. Can anyone please help me?
Thanks in advance!
\bump
Having an issue that I cant seem to figure out. I have been using various roms eg Omega V7,S4 Google Edition V16, Fox Hound 1.1 etc. They all install fine, factory reset before and after wiping the various cashes as required. I also format the SD storage to be sure, but once up and running, apps installed, every time I restart the phone or for some reason it freezes it just get stuck at the white Samsung S4 logo.
If i go back in to recovery (TWRP 2.6.0.0) factory reset does nothing to fix this. I have also noticed that sometimes the internal SD shows as 0 Mb, and I have to reformat this to re-install a ROM. (Getting corrupt some how?) Only re-installing the ROM from fresh seems to get my phone up and running again. Until something happens. Any ideas?
I follow all instructions as detailed, and never come across this issue with my S3.
Ok after trying a few things the only thing that seemed to fix the problem was reflashing stock firmware using oden.
I had to reformat the internal storage again as this was acting like it was encrypted, which it was not. Think this problem that caused my phone not to boot when when restarted.
No Idea why it did this but its fixed now.
john81uk said:
Ok after trying a few things the only thing that seemed to fix the problem was reflashing stock firmware using oden.
I had to reformat the internal storage again as this was acting like it was encrypted, which it was not. Think this problem that caused my phone not to boot when when restarted.
No Idea why it did this but its fixed now.
Click to expand...
Click to collapse
same problem. As long as i dont reboot it works fine...first reboot it get stucked....
willhave to reverse to stock then...
too bad i loved GE!!!
So simple and fast!
Hello,
I've got a problem with my gt-i9505.
I've managed to root the phone and install TWRP.
So i decided to install CM10.2 (21-08) and the right gapps for it.
Everything worked very good and I couldn't be happier.
All my apps were back and it was ready to use it!
I turned off the phone and went to sleep.
The next day i turned it on and it got stuck on the bootscreen (not the CM bootscreen, but the SAMSUNG GALAXY S4 bootscreen).
So I tried to do factory reset and install rom again, gapps again, afterwards again wipe dalvik and cache.
But i keep having the same problem. Right now after flashing the rom it doesn't even boot up the first time.
I also tried going back to 10.1, but same problem.
I don't know what to do, i just got my s4. Really hope i can fix it.
Luckily i can enter the recovery. But i didn't do a backup or anything.
Does anyone have any tips on how to get it working again?
ricomana said:
Hello,
I've got a problem with my gt-i9505.
I've managed to root the phone and install TWRP.
So i decided to install CM10.2 (21-08) and the right gapps for it.
Everything worked very good and I couldn't be happier.
All my apps were back and it was ready to use it!
I turned off the phone and went to sleep.
The next day i turned it on and it got stuck on the bootscreen (not the CM bootscreen, but the SAMSUNG GALAXY S4 bootscreen).
So I tried to do factory reset and install rom again, gapps again, afterwards again wipe dalvik and cache.
But i keep having the same problem. Right now after flashing the rom it doesn't even boot up the first time.
I also tried going back to 10.1, but same problem.
I don't know what to do, i just got my s4. Really hope i can fix it.
Luckily i can enter the recovery. But i didn't do a backup or anything.
Does anyone have any tips on how to get it working again?
Click to expand...
Click to collapse
Hi,
Look HERE
Put everything back to stock then, try again.
I found some 10.2 ROMS do not like rebooting,and just hang.
Remove the battery and try again normally worked.
malybru said:
Hi,
Look HERE
Put everything back to stock then, try again.
I found some 10.2 ROMS do not like rebooting,and just hang.
Remove the battery and try again normally worked.
Click to expand...
Click to collapse
Thanks for replying
I followed the instructions and succesfully installed the official stock rom for my device and region.
But it's still stuck at the samsung boot screen.
And now i can't boot into TWRP anymore either, is that correct?
After that I flashed with the .pit file. But still stuck on bootscreen.
Is there any other way to solve this problem?
idgaf about custom roms or CM10.2 anymore, i just want my phone to work.
Wether it's with custom or with stock firmware.
Really hope I didn't break my phone. :crying:
EDIT:
I wiped cache after flashing, but no data wipe/factory reset. That did the trick.
God i can't be happier my phone finally works again. Now i'm scared to flash a custom rom again. I think i need to install TWRP or CWM again too I'll just wait for now.
so... my phone suddenly wouldn't accept my password anymore to unlock. i tried a couple of things, like deleting the files lockscreen files using TWRP to bypass that... but then it got stuck in a "android is booting" screen and everytime i tried to change my PIN, it would crash.
So i went to TWRP and wanted to reflash my ROM (I was using Resurrection Remix), but then I couldn't decrypt the data because ... the password again wouldn't work. so I finally decided to use sideload to try to flash everything again and it works, but the problem is that even after the factory reset, the phone will boot up but there won't be any images. You can hear the jingle play when you first turn on any android phone... but it's all black.
edit: I've tried flashing two different roms: RR & Lineage OS, both will boot up, but same problem.
I haven't been able to back anything up because... well the OS wouldn't boot up and my TWRP was being wonky and I can't restore anything...
Anyone have any ideas of how to fix this? I feel like i could use the format data and start from scratch... and make it work but then I assume that would wipe my titanium backups, which I haven't been able to extract out. so if anyone has any guidance on how to do that, that would be great. I've tried to use adb to extract stuff out but it hasn't worked and now I can't even do it anymore because I don't have usb debugging on.
nova_vo1 said:
so... my phone suddenly wouldn't accept my password anymore to unlock. i tried a couple of things, like deleting the files lockscreen files using TWRP to bypass that... but then it got stuck in a "android is booting" screen and everytime i tried to change my PIN, it would crash.
So i went to TWRP and wanted to reflash my ROM (I was using Resurrection Remix), but then I couldn't decrypt the data because ... the password again wouldn't work. so I finally decided to use sideload to try to flash everything again and it works, but the problem is that even after the factory reset, the phone will boot up but there won't be any images. You can hear the jingle play when you first turn on any android phone... but it's all black.
edit: I've tried flashing two different roms: RR & Lineage OS, both will boot up, but same problem.
I haven't been able to back anything up because... well the OS wouldn't boot up and my TWRP was being wonky and I can't restore anything...
Anyone have any ideas of how to fix this? I feel like i could use the format data and start from scratch... and make it work but then I assume that would wipe my titanium backups, which I haven't been able to extract out. so if anyone has any guidance on how to do that, that would be great. I've tried to use adb to extract stuff out but it hasn't worked and now I can't even do it anymore because I don't have usb debugging on.
Click to expand...
Click to collapse
have you try to re-flash your TWRP? maybe re-flasing your TWRP will work, also maybe installing the original rom will work, and then you can try to flash whatever rom you desire
as i know doing a factory reset from the TWRP delete all of your files, i mean everything. so i don't think that you still have the backup files
Flash the Official recovery of the oneplus 5 and then install OOS by adb into thé recovery.