Related
I am having a problem accessing clockwork mod recovery mode, no matter what process i try it consistently takes me to android recovery instead.
info:
samsung fascinate
rooted
Did odin flash back to stock
Did factory reset back to stock
Did software ota update to the following specs:
HV i500.04
M# sc i500
Firmware 2.1 update 1
Baseband S: 1500.04VD101
Kernel 2.6.29
Build SCH i500 DH101
Installed CWm Recovery from market
Installed Asto file manager from market
Installed Titanium backup from market
Opened CWM application
Went through root permissions dialogue
Flashed CWM recovery to 2.5.1.0
Next i clicked on BACK UP ROM which reboots me into Android Recovery Mode and gives me the standard 4 options for the fascinate:, plus it says installation was aborted:
1.After failing to find update package
2. open update package
3. verify update package
At this point i click on the home button and reboot system now.
Next i try flashing a different CWM Recovery version to 2.5.1.1 , 2.5.1.3 , 2.5.1.4 , all resulting in and error message, so i am still using 2.5.1.0
Next i try toclick on manage and restore backups but there are no backups listed even thouigh i did back up Rom earlier.
next i try to install the Geeknik ROM( Stupidfast v1.23(D101) from the Download ROM section.
I click OK to dialogue box that ask do i want to Down Load Rom
The Stupidfast ROM download starts and finishes
Notification bar says download is complete so i click on notification bar and this takes me to dialogue box which asks do i want to back up existing rom and wipe data and cache . i say yes to both and click OK.
Next dialogue box asks do i want tot reboot. i click Ok
i am then taken back to Android System recovery.
No matter what i do in Clockwork Recovery i always end up back at Anroid System Recovery. i have tried all different scenarios -debugging checked.debugging unchecked,clear cache, dont clear cache, back up rom,dont back up rom, usb connected, usb unconnected, Titanium in,titanium out. watched all different you tube videos on subject.
sorry this was so long. i didnt want to miss any answers to any question any of you might have if at this point you want to offer any help. thanks in advance.
You have to flash CWM with Odin before you can use it. Can't just install from the market or ROM Manager
Kevin, Thanks for your response to my question.
i thought i already flashed CWMRecovery from within ROM Manager. it is the first option at the top of CWMRecovery, also it states under that first choice that my latest recovery id Clockwork Mod 2.5.1.0.
If i scroll down to the bottom of CWMRecovery the last choice shows all of the CWM Recoveries. Recovery 2.5.1.0 is listed at the bottom and is the only one i can flash/install.
In both instances it says that i have flashed this version(2.5.1.0) of CWM Recovery.
I will try whhat you are suggesting and thanks again for the help, it is appreciated
Kevin , I followed your instructions and flashed the CWMrecovery.tar file with Odin3_1.3 and everything is as it should be. The funny thing is (at least to me) that the CWMrecovery version that is listed when i am in recovery mode now is CWM version 2.5.1.0, which is the same version that i flashed within rom manager. Kind of confusing but at least i am where i want to be. Thanks again for the help.
Yeah, it's just one of the quirks with the Fascinate. Unlike most devices, just flashing Clockwork with ROM Manager only puts the update.zip on your SD card. Using Odin to flash the .tar file installs the recovery, so both parts are needed.
where i need to put CWMrecovery.tar in ODIN in which section PDA/PHONE/CSC? 1nx
You only flash things in PDA section, doing otherwise will screw up your phone
Sent from my Fascinate - DJ05/SuperClean/Adryn's 12/30
?
Im kinda new to all this stuff and just wanted to get some step by step stuff if you dont mind. I rooted my Fascinate tried clockwork mod wouldnt work when i tried to backup after downloading the recovery thing and when i read this you guys said something about Odin so I went to appbrain and downloaded tuxility but now im lost on what to do. Maybe something step-by-step would be good. Really appreciate it! (ps: I know im kinda slow but if you wouldnt mind...)
The stock recovery does not allow us to run unsigned zips. Thus, we must flash the CWMrecovery.tar to patch recovery to allow us to run these unsigned zips. Then you can flash CWM from within Rom Manager.
Follow these instructions from fallingup's thread:
http://forum.xda-developers.com/showthread.php?t=788099
THANKS
Thanks ALOT this looks really simple the only thing that idk about is how it said to put it in download mode. Idk what that means. Debugging? and do I mount it? Thats all i think. THANKS agian.
Download mode: power off, pull out battery, with Odin open and USB connected to PC hold volume down and plug in USB.
hi guys
i rooted S2 by this guide inspiredgeek.com/2011/04/30/how-to-root-samsung-galaxy-sii-s2-using-odin-and-superoneclick-step-by-step-guide/
it worked fine,
downloaded ROM manager app, flash clockworkmod recovery, selected S2, successfully downloaded clockworkmod recovery. then reboot to recovery via CWM app.
went to the recovery with menu
-------------------------------
android system recovery <3e>
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
------------------------
with message sayings
E:failed to verify whole file signature
E: Signature verification failed
i managed rooted and installed custom ROM's on G1 and desire without any problems in the past.
i have no idea why it wouldnt work on S2
any help would be brilliant thanks
Install one of these kernels http://forum.xda-developers.com/showthread.php?t=1103399
thanks for the reply, that's funny cos i am actually already looking at this thread
but the problems is the last of kernal name like KG1 etc, but my is 2.6.35.7.I19100XWKDD-CL161513
[email protected]#2
so i dont know which kernal to use, which one would you suggest?
thanks again
Hmm interesting, that's a fairly old firmware without a cfroot kernel, try installing kies and see if there's a firmware upgrade for your phone.
i am really confused now,
opened kies software, detected S2, then what? there is no option to see if there is newer firmware or whatever
thanks again
Actually forget about kies. Download the latest kh3 firmware and flash it in download mode, then flash the cf-root kh3 kernel.
got the email notification from you, you said forget the odin hehe
so i flash kh3 firmware via odin yes?
1) Install Kies(only install it, do not run it or Odin will not work)
2) Download odin 1.85
3) Set phone to usb debugging (settings > applications > development > usb debug
4) open odin (and mount the firmware tar file or files, see specific threads for how and or what)
5) Shut down your phone and reboot it into download mode
6) Flash through odin
wesleyuk said:
so i flash kh3 firmware via odin yes?
Click to expand...
Click to collapse
That's what i would do, place the CORE file as PDA, MODEM file as PHONE and any one of the CSC files as CSC. After its installed flash the cf-root kernel.
peachpuff said:
That's what i would do, place the CORE file as PDA, MODEM file as PHONE and any one of the CSC files as CSC.
Click to expand...
Click to collapse
no no, I meant he needs to install kies, thats it. He should not have kies running in the background or even running in the windows tray at all, when flashing with odin. Edited my post to make it more clear
When I rooted mine, all I had to do was to flash an insecure kernel (you can get much newer versions now than the KDD, up to even KH1 here: http://forum.xda-developers.com/showthread.php?t=1101671&highlight=insecure+kernel), then use superoneclick to root. Superoneclick will flash in CWM recovery for you, so after superoneclick, just reboot straight into recovery. No need to flash anything else unless you want the CWM Rom Manager app.
Superoneclick doesn't give you clockworkmod recovery, you need a CWM kernel, as in samsung land recovery and kernel live in the same happy little place.
Newer stock firmware+cf-root is the easiest way, you may lose your app data though, so backup (try titanium backup, only restore user app data or data in green)
thanks for the replies
i downloaded the KH3 rar file, extracted to a folder. see the screenshot in attachment
which ones?
thanks again
Place the CORE file as PDA, MODEM file as PHONE and any one of the CSC files as CSC. After its installed flash the cf-root kernel.
wesleyuk said:
hi guys
i rooted S2 by this guide inspiredgeek.com/2011/04/30/how-to-root-samsung-galaxy-sii-s2-using-odin-and-superoneclick-step-by-step-guide/
it worked fine,
downloaded ROM manager app, flash clockworkmod recovery, selected S2, successfully downloaded clockworkmod recovery. then reboot to recovery via CWM app.
went to the recovery with menu
-------------------------------
android system recovery <3e>
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
------------------------
with message sayings
E:failed to verify whole file signature
E: Signature verification failed
i managed rooted and installed custom ROM's on G1 and desire without any problems in the past.
i have no idea why it wouldnt work on S2
any help would be brilliant thanks
Click to expand...
Click to collapse
OMG!!! I've got the same problem with you.
I had the same thing, what i did was from the cwm app i downloaded the latest cm7 nightly, once installed and it pops up skiing do i want to instal and wipe etc i clicked yes, the phone rebooted and an android symbol appears and nothing happened.
So i long pressed the power button to switch it off, when i switched it back on, the phone starts installing cm7, once that completes, everything was normal how it should be.
Sent from my GT-I9100 using xda premium
peachpuff said:
Actually forget about kies. Download the latest kh3 firmware and flash it in download mode, then flash the cf-root kh3 kernel.
Click to expand...
Click to collapse
i did everything you said .....downloaded the kh3 firmware flashed it then i flashed the cf-root kh3 kernel but still i cannot get into clockworkmod recovery ( Confused nowww....PlZz help
wesleyuk said:
hi guys
i rooted S2 by this guide inspiredgeek.com/2011/04/30/how-to-root-samsung-galaxy-sii-s2-using-odin-and-superoneclick-step-by-step-guide/
it worked fine,
downloaded ROM manager app, flash clockworkmod recovery, selected S2, successfully downloaded clockworkmod recovery. then reboot to recovery via CWM app.
went to the recovery with menu
-------------------------------
android system recovery <3e>
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
------------------------
with message sayings
E:failed to verify whole file signature
E: Signature verification failed
i managed rooted and installed custom ROM's on G1 and desire without any problems in the past.
i have no idea why it wouldnt work on S2
any help would be brilliant thanks
Click to expand...
Click to collapse
This thread FAQS/Guide/Additional Info For Rooting S2 - High level summary have helped me on rooting and getting CWM.
Always try to follow the guides here on XDA, not from some other websites/blogs
Hello,
first I'd like to say that since the first day, I really....hate my Galaxy S4, this is probably the phone I hate the most actually. This is why I wanted to get rid of this stupid stock ROM (who the hell wants all this preinstalled on his phone ?!)
I flashed it from the CWM Rom manger with Cyanogen Mod 10.1 and it's been stuck on the CM logo since 3 hours, I tried entering into recovery mode, but it boots on the stock recovery.
Please, help me..
You can fix this. You have to reflash stock firmware again since something clearly went wrong and you cant do anything.
1. Download Odin ( http://forum.xda-developers.com/showthread.php?t=2189539 )
2. Download the stock ROM image ( http://samsung-updates.com/device/?id=SGH-I337 ) Large File. Unzip the file to get the .tar.md5 file you will need.
3. Download and install Samsung Kies (Installs Drivers)
4. Boot the phone into "Download Mode" (From http://www.ninjaromeo.com/download-mode-samsung-galaxy-s4/ for i9500 but same procedure)
Unplug phone
Switch off your Samsung Galaxy S4 I9500 Android Smartphone.
Now press and hold “Volume Down + Power + Home” buttons together for a little bit of time.
After appearing Samsung logo release the buttons.
Then you will move on to Warning page.
Read the warning before going to proceed.
As the given on screen instruction, press Volume Up button to enter into download mode.
The you will see the page with Android logo and “Downloading, Do not turn off target!!”
If you don’t want to move on download mode, just press Volume Down button in the proceed page.
5. Plug Phone into PC. Open Odin. Select "PDA" and point it to the large firmware file that you downloaded that has a .tar.md5 extension.
6. Click "Start". This will reflash the stock recovery and firmware. It will retain your Data partition. Odin will inform you when it's done. Then close Odin.
You now have a functioning phone. Yay!
Backup everything you need to back up from your data partition to your PC or a microSD card.
If you want to Flash CM10.1
first run this,CASUAL http://forum.xda-developers.com/showthread.php?t=2297900
It will install TWRP Recovery. Just like CWM but touch. No difference to me has all same features. It installs easier so I used it. It will also root the device and perform the Loki trick to get it to boot and bypass the locked bootloader. RUN IT and follow the instructions laid on in that post word for word and you will get everything working.
So! Now you have a working recover! Yay!. Boot up into Android.
Download the latest CM10.1 Nightly from here. http://get.cm/?device=jflteatt&type=nightly
Download Latest Google Apps from here http://goo.im/gapps
Copy it to your phone. Preferably a mcroSD card.
Reboot to recovery. Go to Install. Select that CM10.1 file and install it.. (Choosing external SD card if you saved it to a microsd). Repeat for the Google Apps zip file.
When done, wipe Data, Cache, Dalverik Cache from the menu in recovery, sometimes under Advanced.
Reboot.
Working CM10.1.
WoodburyMan said:
You can fix this. You have to reflash stock firmware again since something clearly went wrong and you cant do anything.
1. Download Odin ( http://forum.xda-developers.com/showthread.php?t=2189539 )
2. Download the stock ROM image ( http://samsung-updates.com/device/?id=SGH-I337 ) Large File. Unzip the file to get the .tar.md5 file you will need.
3. Download and install Samsung Kies (Installs Drivers)
4. Boot the phone into "Download Mode" (From http://www.ninjaromeo.com/download-mode-samsung-galaxy-s4/ for i9500 but same procedure)
Unplug phone
Switch off your Samsung Galaxy S4 I9500 Android Smartphone.
Now press and hold “Volume Down + Power + Home” buttons together for a little bit of time.
After appearing Samsung logo release the buttons.
Then you will move on to Warning page.
Read the warning before going to proceed.
As the given on screen instruction, press Volume Up button to enter into download mode.
The you will see the page with Android logo and “Downloading, Do not turn off target!!”
If you don’t want to move on download mode, just press Volume Down button in the proceed page.
5. Plug Phone into PC. Open Odin. Select "PDA" and point it to the large firmware file that you downloaded that has a .tar.md5 extension.
6. Click "Start". This will reflash the stock recovery and firmware. It will retain your Data partition. Odin will inform you when it's done. Then close Odin.
You now have a functioning phone. Yay!
Backup everything you need to back up from your data partition to your PC or a microSD card.
If you want to Flash CM10.1
first run this,CASUAL http://forum.xda-developers.com/showthread.php?t=2297900
It will install TWRP Recovery. Just like CWM but touch. No difference to me has all same features. It installs easier so I used it. It will also root the device and perform the Loki trick to get it to boot and bypass the locked bootloader. RUN IT and follow the instructions laid on in that post word for word and you will get everything working.
So! Now you have a working recover! Yay!. Boot up into Android.
Download the latest CM10.1 Nightly from here. http://get.cm/?device=jflteatt&type=nightly
Download Latest Google Apps from here http://goo.im/gapps
Copy it to your phone. Preferably a mcroSD card.
Reboot to recovery. Go to Install. Select that CM10.1 file and install it.. (Choosing external SD card if you saved it to a microsd). Repeat for the Google Apps zip file.
When done, wipe Data, Cache, Dalverik Cache from the menu in recovery, sometimes under Advanced.
Reboot.
Working CM10.1.
Click to expand...
Click to collapse
Hello, I did everything except the CM10.1 part and succesfully managed to boot my phone onto stock rom, but can't even make it work. Just after booting, it's a completely black screen with the notification bar on top (can't reveal it)
Youssow said:
Hello, I did everything except the CM10.1 part and succesfully managed to boot my phone onto stock rom, but can't even make it work. Just after booting, it's a completely black screen with the notification bar on top (can't reveal it)
Click to expand...
Click to collapse
Try the emergency restore / recovery option in Kies. I have never done it but many people have had to after a bad flash. Not sure how you lost your custom recovery. I had issues with a rom I flashed and for stuck at boot but my recovery was fine so I restored my nandroid.
Try wiping your Data partition. Should fix that. Just hook the device up to a computer and copy your stuff off it first. Stock firmware was restored so any lingering problems would be related to stuff in the Data partition. Should be able to boot the stock recovery and do a factory reset which will also wipe the data partition.
As mentioned above you dont need the whole Kies suit. You can just install USB drivers. To make it simple as possible I stated using Kies but you can obtain the drivers elsewhere and install them rather than the whole Kies suit.
WoodburyMan said:
Try wiping your Data partition. Should fix that. Just hook the device up to a computer and copy your stuff off it first. Stock firmware was restored so any lingering problems would be related to stuff in the Data partition. Should be able to boot the stock recovery and do a factory reset which will also wipe the data partition.
As mentioned above you dont need the whole Kies suit. You can just install USB drivers. To make it simple as possible I stated using Kies but you can obtain the drivers elsewhere and install them rather than the whole Kies suit.
Click to expand...
Click to collapse
I can't even browse files from my computer, my phony is only detected by Odin ATM.
The stock recovery gives me two options: Quit, Download mode.....
God I'm so anxious right now
jperry73 said:
Flash back to stock with ODIN
Click to expand...
Click to collapse
This is what I did.
Stock ROM doesn't even work now, when I boot it for the first time it's a black screen with the notification bar on top and I can't get out and need to remove the battery.
OMFG
REMOVED SIM AND SD CARD AND THE PHONE BOOTED !
Thanks for the help guys, I'm very happy that my phone isn't dead ! (And I will never ever try to flash again a phone like the GS4)
Hi
I have an sgh-i377 (att usa), i installed a 4.3 rom using safestrap since i dont have cwm, now it's stuck in the samsung galaxy s4 logo, it wont boot, i tried to download the stock 4.3 from http://samsung-updates.com/device/?id=SGH-I337 but it doesnt list anything, can you please show me where I can download sgh-i377 stock 4.3 from?
I tried going into the android recovery and wiping all caches but nothing. your help is greatly appreciated.
Thanks,
portmap said:
Hi
I have an sgh-i377 (att usa), i installed a 4.3 rom using safestrap since i dont have cwm, now it's stuck in the samsung galaxy s4 logo, it wont boot, i tried to download the stock 4.3 from http://samsung-updates.com/device/?id=SGH-I337 but it doesnt list anything, can you please show me where I can download sgh-i377 stock 4.3 from?
I tried going into the android recovery and wiping all caches but nothing. your help is greatly appreciated.
Thanks,
Click to expand...
Click to collapse
Try flashing i337mk2stockboot.tar from my thread post#3 ... http://forum.xda-developers.com/showthread.php?t=2573080 see if that work. ..... Goodluck. ......
Swyped from MF3 Deadly Venom SS
ted77usa said:
Try flashing i337mk2stockboot.tar from my thread post#3 ... http://forum.xda-developers.com/showthread.php?t=2573080 see if that work. ..... Goodluck. ......
Swyped from MF3 Deadly Venom SS
Click to expand...
Click to collapse
I flashed the boot file you suggested and I see progress, now I have a "system software not authorized by AT&T has been found on your phone.." message..
what should I do next?
Revived it with http://forum.xda-developers.com/showthread.php?t=2502003 (MF3 TARs.tar)
Thanks for your help!
Your Choice of Android,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Choose your Flavor
First Time (Noob / Newb) to Flash a ROM on i9000must readBe Sure First.
NOTE: This guide is meant for i9000 only, not i9000B, M or any other mentioned below
There are 20 versions of Galaxy S, and their ROMS may not be compatible with each other,
Make sure you choose the correct ROM for you Device, before flashing it.
Galaxy S GT-I9000 Galaxy S International
Galaxy S GT-I9000B Galaxy S Brazil
Galaxy S GT-I9000L Galaxy S Chile.
Galaxy S GT-I9000M Vibrant Bell
Galaxy S GT-I9000T Galaxy S Latin America
Galaxy S GT-I9001 Galaxy S Plus International
Galaxy S GT-I9003 Galaxy SL International
Galaxy S GT-I9010 Giorgio Armani International
Galaxy S SCH-I500 Fascinate Verizon
Galaxy S SCH-I510 Droid Charge Verizon
Galaxy S SCH-R910 Galaxy S MetroPCS
Galaxy S SGH-I896 Captivate Rogers
Galaxy S SGH-I897 Captivate At&t
Galaxy S SGH-N013 SC-02B Docomo
Galaxy S SGH-T959 Vibrant T-Mobile (USA)
Galaxy S SGH-T959D Fascinate Telus
Galaxy S SGH-T959V Galaxy S 4G T-Mobile (USA)
Galaxy S SGH-I997 Infuse 4g At&t
Galaxy S SHW-M110S SHW-M110S Korea Telecom
Galaxy S SPH-D700 Epic 4g Sprint
Check your IMEI here When you are not sure what model is your device.
Always START Here
Fully Charge your Phone before Flashing
To Check battery level, (WITHOUT plugging in the USB cable).
type *#0228# in the phone dialer, and Voltage value is AT LEAST 3800 (mV).
Check list before attempting to flash a ROM
1) Correct ROM or kernel or required files for device was downloaded
2) Battery was fully Charged
3) Every thing Important was backed up to PC or Ext SD card or Cloud.
a) efs backup
b) Use Call logs Backup, SMS backup. App Backup from Play store and or simply copy everything How to save files to your PC Note:-
It's assumed that you can and know how to connect your Phone to PC with USB cable .
If you do not know, first install Samsung USB drivers on your PC/Laptop, than enable USB debugging on your phone by settings menu > Developer options > tick USB Debugging.
After this use only Samsung USB cable and plug it into your phone micro USB port and to your PC USB Port. ( Always use the Back USB port on PC as some ports may not connect well enough for flashing ROM's. )
If unable to connect your phone to PC for any reason, refer to this guide
How to put your device in "recovery" or "download" modes on Galaxy S i9000?
Volume UP + HOME + POWER will take you to recovery mode
Volume DOWN + HOME + POWER will take you to download modeUse Combo Key Press
Combo buttons must be used as shown above to get your phone into RECOVERY MODE or DOWNLOAD MODE
What if your recovery or download modes cannot be achieved by combo key press on your device?
You can achieve it by methods suggested in My Android Solutions or by using a USB JIG.
Only Rooting or Flashing Kernels or Modems
Follow this, when your phone has a Froyo ROM and you just want to Root or Root and also have CWM
Needed Download for Froyo ROM:-
If you only want root on your Froyo ROM, just install z4root app
If you want root and CWM download a Speedmod Kernel and Flash to get CWM and Root your Froyo ROM. After flashing the speedMod kernel
1) Boot into recovery menu ( VolumeUp+Home+Power)
2) Select "Advanced features" ( Universal Lag Fix menu)
3) Select "Install Superuser" to be rooted
Follow this when your phone has a Gingerbread ROM and you only want Root or Root Plus CWM
Needed Download for Gingerbread 2.3.6 ROM:-
If you are looking at, only Root for your i9000 phone, it can be easily done with Framaroot app. (Its so easy these days)
But if you wish to have CWM recovery too, than flash a Semaphore Kernel or CF Root Kernel to achieve it.
i9000 Semaphore Kernels for Gingerbread, ICS or Jelly Bean & Kit Kat(select according to Version of ROM and chose the latest will be good enough )
i9000 CF Root Kernels for Gingerbread (select according to Version of ROM eg XWJW4 will also work for XWJW6 & XWJW9) )
Odin3 Flashing Tool ( attached below)How to Flash Kernels?Normal Flashing Method :-
Procedure:
1. Fire up Odin3 on your PC and ensure KIES is not running on your PC by killing (Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe) using Task Manager
2. Put the phone to the Download Mode by pressing (VolumeDown+Home+Power) buttons
and connect the phone to your PC (your phone should be recognized)
3. now select PDA and choose the kernel you had downloaded
4. press Start Button. Do not press anything else or interrupt it, wait for flashing process to complete and phone will reboot
That's it you have now rooted your phone as well as have CWM Recovery. When you have NO access to a Computer or USB Cable
Procedure:-
When you do not have a PC or a USB cable to work with, you can flash Kernels, Modems and even ROM's by using certain Apps like Mobile Odin, Flashify , Flash Gordon or any kernel flashing apps from Play store . So download and install them on your Phone. Detailed guide
In a nut shell, for safety reasons Mobile odin cannot be used to Flash a pit or EFS file, but all others are easily done from your phone without the need to use your PC. Hence CWM can be flashed with a Kernel meant for your phone and from here you can update to ICS or Jelly Bean without a PC or USB cable.
To make it simple
1) Copy File to your SD card (Rom, kernel , or flash files in .tar format)
2) Run Mobile Odin
3) Select Rom/kernel/Modem under Open file , it will automatically sort out the files in the ROM
4) Now you can tick EverRoot, Inject Superuser, if you wish or just flash without them
5) Flash Firmware
That's it, Odin will do everything and you will boot up in NEW firmware or Kernel or ModemFlashing Modem's
Download Stock or ICS or Jelly Bean or Nexus modems from Here
The procedure for Flashing Modems is the same as flashing kernels
Select the modem you wish to test or install as "PDA" in Odin3 and press "START" do not tick anything else or disconnect phone until flashing process is completed
Looking for a ROM? For Stock & Custom ROM or any software Downloads Go here | here or follow this [GUIDE] Unsure which i9000 ROM to choose? or look into the below database to chose what is best for you
Custom ROM's Comparison Database
Mirror
Upgrading (from Eclair or Froyo) or downgrading (from ICS, JBean or KK) to Gingerbread (Stock ROM)Included a kernel for Root and CWM (ClockWorkMod), needed for upgrading to ICS, Jelly Bean or Kit kat ROM's
This is a LIFE Saver ROM for your i9000, Flash this whenever you have a problem with your Phone or just to downgrade from any Custom ROM when you want to switch to another.
General advice prior to Flashing any phone
Its always best to do a "clean" install. meaning you should remove any old scripts, data, cache, junk before flashing a new ROM, this is like taking a bath before using new clothes. For some models it is a must do, for others it may not be a major problem or can be resolved by flashing the dbdata.rfs to clear out the remaining junk that you failed to remove before flashing . But if you had "lagfix" and did not undo it, it can cause internal SD card unavailable situation, which can be difficult to resolve.
Hence before flashing its advisable to
a) undo lagfix IF you had any.
b) Do a factory reset by settings>Privacy> factory reset ( erase SD Card - optional , as formatting SD card could be too) If you format SD card, save your Pictures and Music etc to PC first.
c) And even going into recovery to wipe everything is also good.
d) Removing SIM Card and External SD card ( makes it easier for phone to boot up initially after flashing a new ROM)
Doing this will give you a "CLEAN" install or fresh start for your phone,
IF you want to have it "AS IS" install, with all the stuff (with junk) in the SD card, you can do so too ( without formatting SD card) .
Video guide for first time ODin3 users "How to use Odin"
Downloads needed for undermentioned process
Use Odin3 Version 1.7 to 1.83 ( meant for Galaxy S1 series (attached below)
Attached below 3 i9000 PIT files ( use 512 only for re-partition ) or 512 PIT
i9000 JVU ROM with i9000 JVU CF ROOT Kernel download and unzip
FIRST ensure your phone (i9000) has more than 80% battery charge before attempting to Flash.
Procedure:
1. Fire up Odin3 on your PC and ensure KIES is not running on your PC by killing (Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe) using Task Manager
2. Put the phone to the Download Mode by pressing (VolumeDown+Home+Power) buttons and connect the phone to your PC (your phone should be recognized)
3. Select PDA > CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5
4. Select PHONE > MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
5. Select CSC > GT-I9000-CSC-MULTI-OXAJVU.tar.md5
6. Select PIT > 512 PIT (If 'Re-Partition' is not checked under 'Option', check it)
7. Press the Start button Do not press anything else or interrupt it, wait for flashing process to complete and phone will reboot
After which you repeat steps one and two (to flash the kernel for root and CWM recovery)
3. now select PDA > CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS
4. press Start Button. Do not press anything else or interrupt it, wait for flashing process to complete and phone will reboot
That's it, now you have a perfect Phone, rooted and having CWM recovery, ideal starting point for upgrading to ICS and after that to Jelly Bean custom ROM's
Any problems you may have after doing this, just look here for the solution to that particular problem.
As explained earlier (about clean flashing) if your phone reboots into recovery with some errors appearing in red after flashing the JVU ROM
it may be resolved by flashing dbdata.rfs (attached below) as PDA in Odin3 to remove the junk data files.Using Heimdall to flash
You can do the same process using heimdall instead of Odin3 too, to use heimdall one click you can download i9000 Rescue kit and flash. or use [GUIDE] Flashing with Heimdall
or using Heimdall on a linux machine
Upgrading to ICS
First and foremost, the moment you want to Flash, the rule of the thump is you should have a EFS folder backed-up somewhere else ( external SD card or PC or cloud) How, Look here. And your Battery must have more than 50% charge
Second you should do a Nandroid Backup of your Gingerbread ROM, using the CWM recovery, this will help you solve problems, IF any thing goes wrong in the future.
Every developer has instructions as to how you should flash that ROM, in the thread you are downloading their ROM's, so you only need to follow it to acheive your goal
Download:-
you can choose the ICS ROM here or search XDA and use the guide in the developers thread of that ROM
Basic CWM Flashing Procedure
No need to read if you know how to use CWM flashing procedure
From here on you won't be using Odin3 to flash anymore, you will use the CWM Recovery by using the 3 combo keys to enter recovery or you can use apps from Google Play like Mobile Odin, Flash Gordon or Flashify to Flash direct from your SD cards, so First you need to download the ROM of your choosing into your SD card ( Internal or External) together with gapps for it.
1) After flashing recovery with Odin, You can enter " Recovery Mode" by press VolumeupKey+PowerKey+HomeKey. You do this every-time you want to switch to a JellyBean or iCS ROM or to utilize the many features this recovery has, like Backup/restore/fix permissions and mostly to do the full wipes (NEEDED to be done every time you want to SWITCH ROMS) etc
2) Once in CWM Recovery you do the Full wipes (use your volume keys to move up or down in the recovery menu to select and the power key to execute that command).
The undermentioned wipes need to be done and will constitute a FULL Wipe of your Phone but your SD card will not be fully formatted as such your Images and other non system files will remain as is.
a) Wipe data / Factory reset
b) Wipe cache
c) Enter advanced and wipe dalvic Cache
Once the full wipes are done,
3) You now choose the ROM you placed in your SD card by selecting "Install zip from sdcard"
which will lead you to "choose zip from sdcard", which will take you to all the folders you have on your SD Card..scroll down to where you placed the downloaded files and select it
Once selected the ROM will be Flashed on to your phone, so wait till it says "install completed"
Note:- Some ICS ROM's may need to be flashed twice as it will end-up in bootloop in the first flash
some need to be wiped again after flashing ICS, as certain apps may not work.*
so repeat the ROM flashing one more time
Also if you intent to upgrade to JellyBean after this, you don't have to flash Gapps here , so you can skip the next step and just "Reboot System" after this
Now you do the same selection process again (Step 3) to select the Gapps file and wait till it says "Install completed"
4) That's it, Now select "Reboot system Now"
undermentioned is an example that you can useFrom Pawitp [4.0.4][IMM76I] CyanogenMod 9 for Samsung Galaxy S
Downloads
CM 9.1 Stable : http://get.cm/get/jenkins/7080/cm-9.1.0-galaxysmtd.zip
Google Apps: http://goo.im/gapps/gapps-ics-20120429-signed.zip or select http://goo-inside.me/gapps/
Installation
- First time flashing ICS to your Galaxy S (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
WIPE again or Calendar Sync will not work.
- Upgrading from CM7?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from another CM9 (or teamhacksung) Build?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Note: The upgrade process from CM7 to ICS is automatic, but downgrading from ICS to CM7 (or restoring Nandroid) requires flashing twice. Once from ICS and again from CM7's recovery.
Click to expand...
Click to collapse
Now the ROM has been installed on your phone, so let it boot up and you can repeat this procedure to switch again and again till you have the best ROM of your choosing.
In the event that it fails to boot-up because you placed a wrong ROM that caused a boot loop or due to any other problem, just look in My Android Solutions about that particular problem. IF you cannot enter Recovery mode to flash another ROM.
Similarly You can also use Odin3 to Flash a Gingerbread ROM in Download mode and use your backup to return your phone to its original state.
Click to expand...
Click to collapse
Upgrading to Jelly Bean
First and foremost, the moment you want to Flash, the rule of the thump is you should have a EFS folder backed-up somewhere else ( external SD card or PC or cloud) How, Look here. And your Battery must have more than 50% charge
Second you should do a Nandroid Backup of your ICS ROM, using the CWM recovery, this will help you solve problems, IF any thing goes wrong in the future and you want to return to ICS.
Now make your choice as to which Jelly Bean ROM you wish to use and download that ROM and Gapps (both in .zip format) to your Internal SD card. you can chose Stable ROMs like this or some others. And Flashing them would be just the same as you did for ICS upgrade using CWM
Download:-
you can choose the Jelly Bean ROM here or search XDA and use the guide in the developers thread of that ROM
Basic CWM Flashing Procedure
No need to read if you know how to use CWM flashing procedure
From here on you will use the CWM Recovery by using the 3 combo keys to enter recovery or you can use apps from Google Play like Mobile Odin, Flash Gordon or Flashify to Flash direct from your SD cards, so First you need to download the ROM of your choosing into your SD card ( Internal or External) together with gapps for it.
1) Coming from ICS, You can enter " CWM Recovery Mode" by press VolumeupKey+PowerKey+HomeKey. You do this every-time you want to switch to a JellyBean or iCS ROM or to utilize the many features this recovery has, like Backup/restore/fix permissions and mostly to do the full wipes (NEEDED to be done every time you want to SWITCH ROMS) etc
2) Once in CWM Recovery you do the Full wipes (use your volume keys to move up or down in the recovery menu to select and the power key to execute that command).
The undermentioned wipes need to be done and will constitute a FULL Wipe of your Phone but your SD card will not be fully formatted as such your Images and other non system files will remain as is.
a) Wipe data / Factory reset
b) Wipe cache
c) Enter advanced and wipe dalvic Cache
Once the full wipes are done,
3) You now choose the ROM you placed in your SD card by selecting "Install zip from sdcard"
which will lead you to "choose zip from sdcard", which will take you to all the folders you have on your SD Card..scroll down to where you placed the downloaded files and select it
Once selected the ROM will be Flashed on to your phone, so wait till it says "install completed" Now you do the same selection process again (Step 3) to select the Gapps file and wait till it says "Install completed"
4) That's it, Now select "Reboot system Now"
undermentioned is an example that you can useFrom Pawitp [4.2.2] CyanogenMod 10.1 for Samsung Galaxy S
Downloads
Latest build: http://get.cm/get/jenkins/32365/cm-10.1.0-galaxysmtd.zip
Google Apps: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Installation
- First time flashing CM10.1 to your Galaxy S (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from CM7/CM9?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from another CM10/CM10.1 Build?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Note: The partition layout of CM10.1 is identical to that of CM10 and thus you may use CWM to backup/restore.
Click to expand...
Click to collapse
Now the ROM has been installed on your phone, so let it boot up and you can repeat this procedure to switch again and again till you have the best ROM of your choosing.
In the event that it fails to boot-up because you placed a wrong ROM that caused a boot loop, or your lost your IMEI or network or due to any other problem, just look in My Android Solutions about that particular problem. IF you cannot enter Recovery mode to flash another ROM.
Similarly You can also use Odin3 to Flash a Gingerbread ROM in Download mode and use your backup to return your phone to its original state.
Click to expand...
Click to collapse
Upgrading to Kit Kat
Continued below
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Unbricking the i9000
Upgrading to Kit Kat
First and foremost, the moment you want to Flash, the rule of the thump is you should have a EFS folder backed-up somewhere else ( external SD card or PC or cloud) How, Look here. And your Battery must have more than 50% charge check battery as mentioned on top using your dialer
Second you should do a Nandroid Backup of your Jelly Bean ROM, using the CWM recovery, this will help you solve problems, IF any thing goes wrong in the future and you want to return to Jelly Bean.
Now make your choice as to which Kit Kat ROM you wish to use and download that ROM and Gapps (both in .zip format) to your Internal SD card.
Downloads:-
ROM's:-
1) Omni ROM 4.4 Kit Kat
2) Mackay ROM 4.4
3) Unofficial CM 11
4) CyanAOSP KK4.4 v1.0.0 For gaming...stable
5) C-RoM -4.4- -ALPHA-2
Kit Kat ROM's are still in ALPHA stage as such will have unresolved problems and bugs.
Look here for Discussions/reviews and FAQ about Kit Kat as well as other i9000 Kit Kat ROM's
Kitkat 4.4 Kernels
Semaphore 3.4.0
Mackay kernel 0.603
Cyancore 3.5.0
Stock CM11 kernel + Linaro 4.8 and Mackay TWRP
undermentioned is an example that you can use
From Pawitp Unofficial CM 11 CyanogenMod 11 for Samsung Galaxy S
Downloads
Latest build: http://d-h.st/users/pawitp?fld_id=28174
Google Apps: http://d-h.st/users/dhacker29?fld_id=27426
Installation
- First time flashing CM11 to your Galaxy S (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from CM7/CM9?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from CM10/10.1?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
You will finally see a "set_metadata_recursive" status 7 error. That is normal.
Reboot back into recovery (the reboot is required)
Install the ROM again from internal sdcard using ClockworkMod Recovery
Optionally restore /data from Nandroid Backup (the update will wipe your /data)
Optionally install the Google Addon
- Upgrading from CM10.2?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from another build of CM11?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Warning: You may get set_metadata_recursive related-errors during install if you're using a custom kernel without SELinux support. In that case, revert to the stock kernel before continuing or follow the instruction for upgrading from CM10.1.
Note: The partition layout of CM11 is the same as CM10.2.
Unbricking the i9000
If you are unable to enter download or recovery mode use this guide or this tool or i9000 Easy Reboot Recovery using ADB to get recovery modeIf you have USB connection problems use this guide Unbricking the i9000 can be easily achieved by flashing any of these Rescue kits
Rescue Packages
i9000 Rescue EzBase Rescue and Recovery by nitr8 Full Graphical HOW To and Tutorial download
i9000 Rescue EzBase Rescue with CF Root & semaphore root by nitr8 & chainfire, repacked by slaphead20
i9000 Rescue Rescue Kit for i9000 using heimdall packed by ldq
i9000 Rescue GB Flash Kit packed by psyqiq
i9000 Rescue Darky's ROM Resurrection edition, Guide , Mirror download or here
or any of these ROM's
Upgrade or Downgrade i9000 Stock ROM's (Firmware)
i9000 upgrade or downgrade without changing ROM Ezboot
i9000 Upgrade or Downgrade to GingerBread 2.3.6 ROM JVU + Root with a 512 Pit File (repartition Ticked) Ideal base for upgrading to ICS and J.Bean
i9000 [Deodexed Firmware] Stock XXJVU, Flashed using CWM , zip-aligned and root
i9000 [Deodexed Firmware] Stock XXJVU Flashed using Odin3
i9000 Downgrade to GingerBread 2.3.5 JVT
i9000 Downgrade to Froyo 2.2 JPU
i9000 Downgrade to Eclair 2.1 JM1 Initial Stock ROM, without Combo key functions, use KIES or ADB or JIG for upgrades, Included flash-able FIX for Combo Keys. Eclair XWJM2 - Eclair XWJM3But it may not work on some phones, so we need to flash various other files to solve them (undermentioned files are for JVU ROM)
B+ SBL (primary and secondary Bootloaders is meant for restoring Recovery and download combo buttons as well as boot loader problems, should be flashed as " PDA " with update Phone Boot Loader ticked in Odin3
Param is used for restoring Boot animation, stuck problems, flashed as PDA using Obin3
Cache is for clearing cache flashed as PDA using Odin3
dbdata.rfsis for clearing data flashed as PDA using Odin3
other files that can be used
i9000 2e Recovery
i9000 CWM
Check this out! Links to useful Guides and " Banned " Documentaries
i9000 Android Firmware (Stock)
Here | Here | Torrents Here | Deodexed Firmware Herei9000 Custom ROM's Here
i9000 Kit Kat ROM's
What you might want to know and should know about Kit Kat 4.4
4.4 Kit Kat: Everything You Need to Know & Here or Developers website
Current Developement
[FAQ][Discussion][Reviews] Kit Kat 4.4 / CM 11 for Galaxy S & S Plus [i9000][i9001]
Check this out! Links to useful Guides and " Banned " Documentaries
I have been looking after the pit file for so long.
Nice guide! Thanks
Amazing guide, @xsenman
Brilliant, as always! Highest compliments
Noob friendly guide...thanks for helping a noob at galaxy s1 family(me)
Sent from my GT-I9000 using xda app-developers app
helpfull
Boot menu formatted
Dear,:crying:
please please please help me dude...am in a big tension..
my phone is galaxy s GT-i9000 and the os was cyanogen 9...
but before some day it become stuck and when i put it for reboot it shows only loading screen and nothing else ...i tried many things like removing battery ext.sd and all but no hope ..
so at last i entered into CWM and mistakenly formatted the boot :crying::crying::crying::crying::crying:....but after that i cannot able enter into even CWM.....
but i can get into download mode and nothing else ...
please dude help me what i can do ?? ...and what i want to do..??
and also i didn't made any backup of my contact,message,photos,videos etc....
shall i loss all the things???:crying:
please help me
thanks in advance
johnk kennedy said:
but i can get into download mode and nothing else ...
please dude help me what i can do ?? ...and what i want to do..??
and also i didn't made any backup of my contact,message,photos,videos etc....
shall i loss all the things???:crying:
Click to expand...
Click to collapse
Don't panic, you are still in solid ground and can recover from this, but you may have to lose your contacts, data etc as flashing a new gingerbread ROM, would be the obvious solution. But your photos and videos would still be there, as long as you have NOT formatted the SD card too. On the other hand IF you had google gmail account, it would have backed up your contacts detail, when the sync was ON.
Actually, this thread would have solved your problem already, either you flash the gingerbread upgrade or downgrade JVU ROM as guided or you flash the rescue kit ( which is also the same) in the unbricking section. , This ROM has the bootloader in it so you would not have an issue about it.
Note:- it is possible to use ADB to recover the data and contacts, if you have recovery mode (which you indicate is not having) its also possible to use ADB to boot into recovery, only possible when your have debugging ticked in your device.
SO take a moment to think things overs as to what you want to do, so flash the gingerbread ( sure to recover) or try to recover the data? ( no guarantees though.)
Check this out! Links to useful Guides and " Banned " Documentaries
Amazing guide
ok dude.first of all thanks for giving me such a confidence:highfive::good: .......
Then if i will not loose images and videos and all.....and in case of contact there is a possibility of sync...
then i think its better to do it ...
so please can you explain me what are the steps that i should do ....
please describe me step by step please .......
---------- Post added at 08:41 PM ---------- Previous post was at 08:27 PM ----------
"""""SO take a moment to think things overs as to what you want to do, so flash the gingerbread ( sure to recover) or try to recover the data? ( no guarantees though."""""
I mean please tell which will be the best ROM for my device ...I really loved the previous (Cyanogen 9) ROM...
so please refer me a best ROM,,,
johnk kennedy said:
I mean please tell which will be the best ROM for my device ...I really loved the previous (Cyanogen 9) ROM...so please refer me a best ROM,,,
Click to expand...
Click to collapse
First and foremost, you need to flash the gingerbread ROM to solve your problem and get your phone booting, only after that you should look at CM, 9, 10 or 11. BTW there is no such thing as best ROM, that why you need to read the guide on "unsure which ROM yo chose" to get abetter idea about ROM's
Everything you need to do , has been explained step by step, in the 1st post of this thread, so READ, read and read again , once you understand it all, proceed to do it, step by step
Check this out! Links to useful Guides and " Banned " Documentaries
ok dude ...got it but.....can you please give me link to download XXJW4 to install it using odin...
as you said i red all the giud and got one link...but its from the site "hotfile" but it is banned now ...i cannot able download the file ...please give me another link if you can ..
johnk kennedy said:
ok dude ...got it but.....can you please give me link to download XXJW4 to install it using odin...
as you said i red all the giud and got one link...but its from the site "hotfile" but it is banned now ...i cannot able download the file ...please give me another link if you can ..
Click to expand...
Click to collapse
For all downloads, look in MY Android Collections, link below, you can download from here
chose according to region or use JW9 withthe modem for your country, would work just fine.
Check this out! Links to useful Guides and " Banned " Documentaries
johnk kennedy said:
.....can you please give me link to download XXJW4 to install it using odin......please give me another link if you can ..
Click to expand...
Click to collapse
You can download it from sammobile.com under firmware, just sign up
sent from N7100 & CM10.2 & Devil2 kernel v2.1.2
great work
I cannot Flash any roms on my SGS.
GUYS, HELP!
I cannot flash any roms on my SGS, I tried flashing a rom using CWM but the installation is always aborted. I've done this several time but the same thing just happens. I also tried using Odin but, Odin cannot read my Phone.
I'm currently on GAMERZ rom and I want to flash 4.4 Kitkat. Now, I don't have any idea on how will I flash any roms on my device.
PLEASE HELP ME ON THIS! THANKS!
mriamniks said:
GUYS, HELP!
Click to expand...
Click to collapse
How do you expect anyone to read this??, change your font size, so that we can read and help you.
After reading what you had to say, the details are all in the first post, you only need to read, read and read again, as all the remedies are mentioned in the 1st post of this thread.
Check this out! Links to useful Guides and " Banned " Documentaries
how to root Build number DDJVB Gingerbread 2.3.6
Firoz24 said:
how to root Build number DDJVB Gingerbread 2.3.6
Click to expand...
Click to collapse
you can use framaroot app for root only , or semaphore gingerbread kernel for root & CWM
Check this out! Links to useful Guides and " Banned " Documentaries
Hv been using Arrow rom 8.0. Works fine but wanted to upgrade to Arrow rom 9.0 which is based on the rom for India.
The phone is rooted and custom recovery installed(don't know much about the way to use it). Downloaded the rom and went into recovery mode. Ok'd the wipe data/factory reset. Ok'd wipe cache. Ok'd the option of upgrade from external storage and the phone went to the manual mode with csc as inu and asking for the filename. Didn't know what to do so yanked the battery and rebooted. The booted to Arrow rom 8.0 with all data gone.
One more thing I noticed that in recovery mode I had to use a magnifying glass to read the options. Also there was no option to choose the external storage ie the sd card where I download or copy the roms it only shows phone storage.
Would appreciate the help received in pointing me to the right direction.
These are really basic questions. I'm supprised you managed to flash a rom in the first place.
Full wipe in recovery, if you still could boot after wiping, like in your case, then you didn't wipe correctly. Your phone shouldn't be able to boot anymore after the wiping (because there is no more rom installed).
Then flash the rom. If there is no option for external storage (i think this is highly unlikely), then just copy it to your internal sd card and flash from there.
Are you really sure you have a custom recovery? Because the way you are descriping it, it sounds more like the stock recovery.
Lennyz1988 said:
These are really basic questions. I'm supprised you managed to flash a rom in the first place.
Full wipe in recovery, if you still could boot after wiping, like in your case, then you didn't wipe correctly. Your phone shouldn't be able to boot anymore after the wiping (because there is no more rom installed).
Then flash the rom. If there is no option for external storage (i think this is highly unlikely), then just copy it to your internal sd card and flash from there.
Are you really sure you have a custom recovery? Because the way you are descriping it, it sounds more like the stock recovery.
Click to expand...
Click to collapse
Thanks for the advice. Checked using recovery tool and it says current firmware: stock.
How do I make a full wipe. And also what about the manual mode I get in the recovery mode.
Can mobile odin be used for flashing.
Again, these are really basic questions. You should read the forum more, my guess is you have a I9500, so start reading in that section. Read the parts about rooting, flashing a custom recovery and flashing.
All the information you need is there. I can tell you the exact steps you need to take, but figuring it out for yourself will save you lots of trouble in the furture if anything goes wrong.
I have no idea what manual mode is, so my guess is that you don't have a custom recovery installed. What is the name of the recovery? Or doesn't it display any name? You shouldn't be needing Mobile Odin, maybe only for rooting or flashing a custom recovery, but not for flashing the rom.
Lennyz1988 said:
Again, these are really basic questions. You should read the forum more, my guess is you have a I9500, so start reading in that section. Read the parts about rooting, flashing a custom recovery and flashing.
All the information you need is there. I can tell you the exact steps you need to take, but figuring it out for yourself will save you lots of trouble in the furture if anything goes wrong.
I have no idea what manual mode is, so my guess is that you don't have a custom recovery installed. What is the name of the recovery? Or doesn't it display any name? You shouldn't be needing Mobile Odin, maybe only for rooting or flashing a custom recovery, but not for flashing the rom.
Click to expand...
Click to collapse
Had read the forum before flashing the rom. Rooted my phone and had installed CWM via Odin and confirmed it in the recovery mode. And only after this flashed the Arrow Rom and used it for couple of months.
Don't know what happened to CWM it wasn't there this time in recovery mode, it showed Android System Recovery and not CWM.
Anyway have flashed CWM again along with Crash Rom 11.
Thanks again bro.