Hi,
I have changed my firmware as my Galaxy S4 I9505 was from Hong Kong and i had the 4G LTE not available. After changing firmware to australia non branded Australia XSA (April 2013) PDA: I9505XXUAMDE CSC: I9505XSAAMD8 Version 4.2.2. LTE worked but then USB connection to PC did not work and Charging with PC or charger does not work. Works when in download mode but stumped as to why change of firmware for same phone doesnt work.
Tried to change back to Hong Kong firmware but Odin is failing due to pit partition.
Do not know where to go from here...........
Related
Hi
Ever since I have updated my S3 with Odin I am having trouble with Kies. I can not update with kies and when I connect my phone and go to update section it says "Your current Devices Firmware version is not supported to update firmware via Kies".
So I know what the crack is about that Product code and CSC have to match blah blah blah.
Soo what I would like to ask for is help finding firmware that will match my S3 so it will be up datable through kies again.
My S3 was bough in the UK in Phones4U and service provider is Vodafone. But it never was branded or bloated with Vodafone apps so I am guessing that I have had a BTU unbranded firmware and as I read on other forum Phones4U sell phones with UK BTU Firmware.
My current Firmware is PDA:MK6 / PHONE:MK6 / CSC MK6 (KOR) Baseband - I9300XXUGMK6 / BUILD - JSS15.I9300XXUGMK6/ KERNEL - 3.0.31-2168382 4.3 jellybean
Before I always downloaded UK BTU Firmwares and none of them were not supported with kies.
Also my binary count is 1 after downloading and flashing 4.2.2 which was supposed to be official but wasn't but I am not sure if it affects kies updates or not.
So what Firmware will be compatible with my S3 so its supported with kies? Please help and ask for any additional information about my phone if it will help.
http://forum.xda-developers.com/showthread.php?t=1704138
Your CSC is Korea CSC MK6 (KOR)
Pleas read the faqs and guides CSC etc .
231
JohnnyMug said:
Hi
Ever since I have updated my S3 with Odin I am having trouble with Kies. I can not update with kies and when I connect my phone and go to update section it says "Your current Devices Firmware version is not supported to update firmware via Kies".
So I know what the crack is about that Product code and CSC have to match blah blah blah.
Soo what I would like to ask for is help finding firmware that will match my S3 so it will be up datable through kies again.
My S3 was bough in the UK in Phones4U and service provider is Vodafone. But it never was branded or bloated with Vodafone apps so I am guessing that I have had a BTU unbranded firmware and as I read on other forum Phones4U sell phones with UK BTU Firmware.
My current Firmware is PDA:MK6 / PHONE:MK6 / CSC MK6 (KOR) Baseband - I9300XXUGMK6 / BUILD - JSS15.I9300XXUGMK6/ KERNEL - 3.0.31-2168382 4.3 jellybean
Before I always downloaded UK BTU Firmwares and none of them were not supported with kies.
Also my binary count is 1 after downloading and flashing 4.2.2 which was supposed to be official but wasn't but I am not sure if it affects kies updates or not.
So what Firmware will be compatible with my S3 so its supported with kies? Please help and ask for any additional information about my phone if it will help.
Click to expand...
Click to collapse
use sammobile.com and flash chosen firmware for the UK via odin. After that check your csc.
And you should update to kies 3 to recognise your 4.3 rom
sent from sgs3 -stock 4.3 open europe rom
JJEgan said:
http://forum.xda-developers.com/showthread.php?t=1704138
Your CSC is Korea CSC MK6 (KOR)
Pleas read the faqs and guides CSC etc .
Click to expand...
Click to collapse
Hi the info about my current CSC is from the KIES when i connect my phone to the PC. Does it mean that my phones CSC is Korean or that the Firmware I currently is Korean?
I bought my phone in he UK so i think it should be BTU shouldn't it ?
Also uglyjohnny I have downloaded kies3 but I still get the same message about my firmware but thank you for help.
Also I have use sammobile.com to download my firmware and it was UK firmware i downloaded every time.
Pleas read the faqs and guides CSC etc .
Change CSC i believe is what you want not that i ever use Kies to be 100% .
Kies Emergency Recovery post may help.
http://forum.xda-developers.com/showthread.php?t=1978840
JohnnyMug said:
Hi
Ever since I have updated my S3 with Odin I am having trouble with Kies. I can not update with kies and when I connect my phone and go to update section it says "Your current Devices Firmware version is not supported to update firmware via Kies".
So I know what the crack is about that Product code and CSC have to match blah blah blah.
Soo what I would like to ask for is help finding firmware that will match my S3 so it will be up datable through kies again.
My S3 was bough in the UK in Phones4U and service provider is Vodafone. But it never was branded or bloated with Vodafone apps so I am guessing that I have had a BTU unbranded firmware and as I read on other forum Phones4U sell phones with UK BTU Firmware.
My current Firmware is PDA:MK6 / PHONE:MK6 / CSC MK6 (KOR) Baseband - I9300XXUGMK6 / BUILD - JSS15.I9300XXUGMK6/ KERNEL - 3.0.31-2168382 4.3 jellybean
Before I always downloaded UK BTU Firmwares and none of them were not supported with kies.
Also my binary count is 1 after downloading and flashing 4.2.2 which was supposed to be official but wasn't but I am not sure if it affects kies updates or not.
So what Firmware will be compatible with my S3 so its supported with kies? Please help and ask for any additional information about my phone if it will help.
Click to expand...
Click to collapse
Hi i had the same issue and here is how i fixed it
1. Flash the 4.3 UK BTU firmware from sammobile using ODN
2.Root your phone using cf autoroot - Instructions http://www.theandroidsoul.com/samsung-galaxy-s3-root-tools-videos-guides-downloads/
3. Download CSC Changer from play store and change CSC on BTU
4.Download and install triangleaway app to reset flash counter - http://au.ibtimes.com/articles/4973...ung-galaxy-s3-gt-i9300-reset.htm#.Urj3D7Rn25h
5.Flash the 4.3 firmware again using ODIN
6.Now go into recovery mode and wipe cache and wipe factory data
Your phone will be unrooted and the CSC will match ( Credit goes to medi-927 who originally posted this guide)
Hello everyone,
I have Galaxy S4 I9505 that is unbranded and unlocked, updated with the latest firmware via Kies3. Stock ROM, Knox 0x0.
My firmware info:
PDA: I9505XXUEMKF
CSC: I9505BTUEMK5
MODEM: I9505XXUEMKF
(I checked on sammobile and its UK BTU firmware)
I am from Croatia using T-mobile as a carrier. Problem first appeared right after the first 4.3 update was released via Kies3.
The problem is that when I select LTE in Network mode options it doesn't connect to 4G, the icon only shows H+ in a 4G area. If I leave it running in LTE mode, after a while the mobile data will shut down, signal will drop (like it resets) and after a few moments it will work again. My mail or whatsapp messages for example will arrive 10 - 30 min later. This will repeat over and over until I turn it off in Network mode and select WCDMA/GSM only. Everything was working fine prior 4.3 update.
Also I hope there is a solution that doesn't include flashing custom modem files or anything that voids my phone warranty.
Thank you,
Skyward
Anyone??
My phone had mobile network signal problem like weak signal,emergency call only and not registered to network.I tried to flash different modems for the issue but it didn't resolve the problem. So i decided to flash complete firmware with Odin3 v3.04 now the mobile network seems to be working fine but i don't have any wifi bcoz the phone is not turning on the wifi at all.
I have flashed a stock 4.2.2 of France region i9505XXUBMGA and my device actual firmware was of Hong Kong region I9505ZHUAME1 can that be the cause of problem.One thing else that i have noticed in setting about phone that the baseband is still being showed of the Hongkong region i9505ZHUBMF4 that i flashed before flashing the stock France region 4.4.2.
Hi there fellow XDA developers.
My uncle bought a Samsung galaxy note 3 from Saudi Arabia (its been like 8 months) and his phone still have't received any KitKat update. It's current android version is 4.3 lollipop.
___INFO___
Phone model: SM-N9005
Original CSC code: BTU
Firmware's CSC code: BTU
CSC country: UK & IRE
CSC country ISO: GB
Product: SM-N9005ZKEBTU
Build No: JSS15J.N9005XXUDMK2 (N9005XXUDMK2)
I tried updating via Kies and Software update it says the same thing. YOU CURRENTLY HAVE THE LATEST UPDATES FOR YOUR DEVICE
So what is the case here? Will there be an update, or is there another way or is it gonna be ODIN?
Thank you
Hardwelling said:
Hi there fellow XDA developers.
My uncle bought a Samsung galaxy note 3 from Saudi Arabia (its been like 8 months) and his phone still have't received any KitKat update. It's current android version is 4.3 lollipop.
___INFO___
Phone model: SM-N9005
Original CSC code: BTU
Firmware's CSC code: BTU
CSC country: UK & IRE
CSC country ISO: GB
Product: SM-N9005ZKEBTU
Build No: JSS15J.N9005XXUDMK2 (N9005XXUDMK2)
I tried updating via Kies and Software update it says the same thing. YOU CURRENTLY HAVE THE LATEST UPDATES FOR YOUR DEVICE
So what is the case here? Will there be an update, or is there another way or is it gonna be ODIN?
Thank you
Click to expand...
Click to collapse
Some old firmwares are stucked and don't update. You will have to flash the firmware via ODIN. The latest for your device is: HERE. Good luck
hi
I had problems during reflash n9005 before.
i had version N9005XXUFNG2 and wanted to update to Poland XEO version N9005XXUEND3. Somebody reply me i can use it and i almost kill my note3 during flash.
Then somebody explain i cant downgrade from NG2 to ND3 so i reflash back to correct version and let i to wait.
question 1:
my current firmware is N9005XXUGNG1_N9005ATOGNG1_N9005XXUGNG1_HOME.tar.md5, phone is probably from Austria A1 network (i bought it in local store with papers)
now there is update to android 5.0. Of course i got info and tried to update phone via wifi but after it download firmware (over 810mb) during recovery flash it end at 29% with ERROR message than suggest to use KIES so can i now use POLAND XEO firmware:
Code:
Model SM-N9005
Model name GALAXY Note 3 LTE
Country Poland
Version Android 5.0
Changelist 3643614
Build date Wed, 25 Feb 2015 12:57:23 +0000
Product code XEO
PDA N9005XXUGBOB6
CSC N9005XEOGBOA4
links are here:
Code:
http://www.sammobile.com/firmwares/download/43864/N9005XXUGBOB6_N9005XEOGBOA4_XEO/
http://www.sammobile.com/firmwares/download/43186/N9005XXUGBOA5_N9005XEOGBOA4_XEO/
if YES, which file should i use B6 or A5 (i think B6 but update from Austria A1 for n9005 is A5)?
question 2:
my second N9005 is problably from Ireland Meteor still with 4.4.2 currect: N9005XXUENC2_N9005METENB1_N9005XXUENC2_HOME.tar.md5
Can i now update to 5.0 Poland XEO from same upper links version B6 or A5 ?
1 yes
2 yes
BOB6
Hi,
I'm in Qatar and I've SM-N9005 with Baseband N9005XXUGNG1. Can I flash official update firmware from other countries like Saudi Arabia with firmware N9005XXUGBOEA?
I would really appreciate if someone could give me link to some kind of tutorial on reading firmware compatibility issues.
Regards
alighilzai said:
Hi,
I'm in Qatar and I've SM-N9005 with Baseband N9005XXUGNG1. Can I flash official update firmware from other countries like Saudi Arabia with firmware N9005XXUGBOEA?
I would really appreciate if someone could give me link to some kind of tutorial on reading firmware compatibility issues.
Regards
Click to expand...
Click to collapse
I have been trying to find an answer to this for a long while, but I just can't. There are some ROMs which are meant for 32 GB devices, and then there are some ROMs which are meant for 16 GB devices. If you download a ROM which is meant for 16 GB Note 3, then obviously you won't be able to flash it on a 32 GB Note 3. And the firmwares listed on sammobile.com don't say which are which!
So I have given up, when a new base pops up, I simply head over to the Alexandar's topic to see whether he has complied the newer version or not, and he does that so fast. That is as stock as a ROM can get, other than ROMs from sammobile.com, so I don't really bother any more.