Warning camera failed - Galaxy S 4 Q&A, Help & Troubleshooting

I got the message "warning camera failed" and black screen on my gs4 on the latest firmware from btu uk unlocked. Anyone think it's hardware or software? It's happened three times but now seems ok. But I'm worried it may happen again after my 14 day exchange window.
Please give any advice
Thanks

Bump please help

This happened with my camera out of the box, went back straight away, camera fault, hardware related. Hope this helps,

Related

Sensors and MCU not working

Hi guys,
New owner of a S4 (GT-I9505 international) here with a problem. 2 days ago I noticed the screen wasn't rotating anymore. I used to rotate it portrait/landscape in applications like Camera or Internet (browser). The moment when it started to bother me was when looking at pictures with the phone in portrait and the image was landscape. Trying to rotate the phone didn't help. It was frozen. I called a buddy of mine who has some experience with Samsung devices and told me to verify the "Auto-Rotation" settings. It was all OK and enabled. Then he suggested turning the phone off and pulling out the battery and SIM card for 5 minutes and putting it all back. This didn't help either. Finally we got to the point where he told me to enter *#0*# in the Phone dialing application. As you might already know, this code gives you access to the "testing" hidden utility. There I tested all the options available. Everything was fine except for the Sensors and SensorHub Selftest.
In the Sensors section, all the tests failed, starting with the Accelerometer and ending with the Temperature. I uploaded screenshots taken during the tests. Please remember this started 2 days ago. Before this it was working perfectly. I don't recall making and major changes like updating any OS components or installing/running stress utilities related to sensors or device behavior. After doing some research online and reading about other people's similar problems I got to the point where I started to suspect a problem with the MCU (Micro Controller Unit). This component, according to Samsung, controls all the sensors and reads raw data from them without accessing the AP (Application Processor) this way extending the battery life. I believe the problem is here because it seems odd that none of the sensors are working all of a sudden. Can this component put the sensors into a sleep state and shut them down completely? Might this be the case here?
Below are the solutions I tried in order to revive the MCU and finally the sensors. I was all without success:
1) Turned off the phone and pulled the battery and SIM out. Put the back in after about 5 minutes. Result: sensors not working.
2) Reset to factory-settings from the settings option while the phone was in the working state (turned on). Result: sensors not working.
3) Rooted the phone, installed Clockwork Recovery, made a full system and applications backup and then installed custom ROM (two actually: PACMan, Google Play Edition (4.3)). I did this in order to exclude a problem related to drivers in the stock Samsung ROM, even if it was logical that Samsung being the owner and manufacturer of the device might have the "best" drivers and applications for inquiring the device components/sensors. I am aware this ended the warranty for me, but can I know it can easily be undone. Result: sensors not working.
4) Restored the original stock Samsung ROM. Result: sensors not working.
The utilities used for sensor testing were: Sensor Kinetics and Sensor Tester. Both can be found in the Play Store. On my wives phone, which is an old HTC Desire, both utilities picked up the available sensors and created graphs with the results. On my S4, I only got blank charts/graphics/results. In Sensor Kinetics for the Gyro for example, the message was "Waiting for the Gyroscope sensor...", just that, stuck.
If there are any other guys (or ladies!) out there who encountered this awful experience, please reach out and tell me if you found any practical solution, any other then just taking the device back to warranty. I'm open to any suggestions.
Best regards,
Andrei
Most likely a defective device ... can't you claim warranty and sent it back?
Sounds like hardware failure. This would be an issue for Samsung to solve.
Sent from my GT-I9505
AvelonTs said:
Most likely a defective device ... can't you claim warranty and sent it back?
Click to expand...
Click to collapse
Unfortunately I bought it second-hand and it does not have any warranty. I guess it's one of those moments I wish I had patience and gathered more cash to buy a new one from the store. Anyway, it's my bad luck. I had it working perfectly for weeks after buying it. I will use it like this for the time being..
i´ve got the exact same problem since yesterday...
i think i´ll take it to the shop for warranty
I've got the exact same issue. All sensors are having the same issue. None are working,
I found out because my camera app was not switching between landscape and portait any more. All pictures are saved as landscape...
Called Samsung Netherlands and they told me to wipe my phone (still latest original stock ROM) and try again.
Making a backup now using Kies... and will hard reset it afterward and check the sensors.again.
Probably not going to work... So I have to send it in...
darklord said:
I've got the exact same issue. All sensors are having the same issue. None are working,
I found out because my camera app was not switching between landscape and portait any more. All pictures are saved as landscape...
Called Samsung Netherlands and they told me to wipe my phone (still latest original stock ROM) and try again.
Making a backup now using Kies... and will hard reset it afterward and check the sensors.again.
Probably not going to work... So I have to send it in...
Click to expand...
Click to collapse
Hi there. I had same problem with sensors and MCU test failed, so i took phone to service. They said its hardware failure and replaced main board. Im picking phone tommorow and we will see...
Hi guys,
I took mine to a local phone service, not the official one, but they are an affiliate. They could not figure out exactly what the problem was so they replaced the logic/main board just for testing. It was all working fine. They called and informed me of the findings. Given the fact I don't have warranty for it, they suggested to send it to our main service in Bucharest where they have a more sophisticated testing equipment. It is possible to get a more precise answer regarding the defective component and maybe a less pricey solution to the problem. At this time, the only viable option is to get a new logic board in place, which is about to set me back 250 USD. I will get an answer from Samsung in Bucharest by tomorrow or the day after tomorrow.
I will get back to you with my final solution... hopefully something not so expensive
@darklord, @eweu: please post back you findings. Maybe in the future when some other unfortunate owner finds his way in here, will have a better understanding of whats on the plate for him.
Thanks,
Hard reset did not work as expected. Going to drop it off at a local official repair center....
S4 Sensors failing
I have the same problem with my S4 GT-I9505 device not auto-rotate, air gestures with gyroscope and accelerometer tests failing. S4 been back for 3 weeks to Samsung for repair came back and failed again after 1 week
KSal7506 said:
I have the same problem with my S4 GT-I9505 device not auto-rotate, air gestures with gyroscope and accelerometer tests failing. S4 been back for 3 weeks to Samsung for repair came back and failed again after 1 week
Click to expand...
Click to collapse
After installing some other ROM's and playing with different CSC's I have no sound and even no wireless and only Edge speeds on some ROM's. Restoring from backups, wireless came back and HSDPA+ also, but no luck with sound what so ever. Now, I have a tablet more or less. Thanks Samsung, this is great!
canaris1780 said:
After installing some other ROM's and playing with different CSC's I have no sound and even no wireless and only Edge speeds on some ROM's. Restoring from backups, wireless came back and HSDPA+ also, but no luck with sound what so ever. Now, I have a tablet more or less. Thanks Samsung, this is great!
Click to expand...
Click to collapse
Flashed I9505XXUDMH8_I9505OXXDMHA_BTU, sound and wlan working again. Previous problem with MCU/sensors still there.
i'm tired
canaris1780 said:
Flashed I9505XXUDMH8_I9505OXXDMHA_BTU, sound and wlan working again. Previous problem with MCU/sensors still there.
Click to expand...
Click to collapse
really i'm tired to solve this issue.
when i install new stock software the sensors work fine just a few minutes only yhen return to fail again.
i think its software issue and i'll solve it :good::good::good:
Sensors work again
:laugh: :victory:
Its work right now by itself
:crying:
after uploading the pictures its fail again
abdali_m2 said:
:laugh: :victory:
Its work right now by itself
:crying:
after uploading the pictures its fail again
Click to expand...
Click to collapse
I have the same thing here
all sensors are broken because of SensorHub BIN FW Version: AT0199999
then i try to update firmware with *#2663# it failed.
I have the same problem with my S4 GT-I9505.
Suddenly the device do not auto-rotate, and no air gestures with gyroscope and accelerometer are working.
The SensorHubTest end with FAIL.
Mid december I got one OTA firmware update and I didn't notice any problems first.
A few days after newyear I notice that my auto-brightness adjustment did not work properly.
Can't remember if auto-rotate didn't work when I notice the auto-brightness problem.
But finally I am here because I searched for sensors problems.
I did the SensorsHub Test with *#0*# and it ends with FAIL.
It seems that there is a problem with the 4.3x firmware.
With 4.2x all was fine.
Can anybody confirm my thoughts - that the firmware is broken and not the MCU itself?
What can we try? Downgrade? I read that one was lucky with "factory reset" but it didn't helped to revive the MCU of my device.
Thanks for reading
and answering
___
DK
Hi, i am a owner of a sch-i545 phone, and i have the same problem with the phone: no response of any sensor and a fail on test (or upgrade firmware) of the sensorhub.
At this time i was tried a lot of solutions: i was flashed stock firmware, custom firmware, and of course a factory reset (by the way, the first time with this problem was when i did it a single factory reset), its still broken the communication with the sensors.
I get back to life the phone when i upgrade the phone from 4.2 to 4.3 (sadly) and get lost when i update the binaries in super su (previously rooted with vroot).
Yesterday i give the phone to a technician (a close friend of another best friend), he will test the phone on this weekend to determine what is the problem to try to fix it.
When He fix this phone, i will post any news!
Regards.
remy1004 said:
At this time i was tried a lot of solutions: i was flashed stock firmware, custom firmware, and of course a factory reset (by the way, the first time with this problem was when i did it a single factory reset), its still broken the communication with the sensors.
I get back to life the phone when i upgrade the phone from 4.2 to 4.3 (sadly) and get lost when i update the binaries in super su (previously rooted with vroot).
Regards.
Click to expand...
Click to collapse
Thanks for your answer. I have hope that the next firmware will fix it.
What is strange that none of any reseller/privers know this problem. It seems that also Samsung has no knowledge about this special error.
Well if the next firmware didn't fix the problem, I can replace my model with a working one, that is what the guy at the phone shop offers to me.
___
DK
Same Problem Here
Hi guys, I'm new to this forum so be nice :angel:
I am having the same problem in that none of the sensors are working which indicates that it is a connection issue or the actual hub not working or the firmware and not the individual sensors themselves. I have thought about this and looked around and to me it seems like there are only 3 possibilities for the problem:
1) The SensorHub BIN FW Version is out of date and needs to be updated manually (not through *#2663 as it doesn't work)
2) There is a connection issue e.g. the cable from the sensorhub to the motherboard is loose or broken
3) The sensorhub is broken (not the sensors)
I will try to find the firmware files and see if I can do a manual update. If that fails I will open up the phone and see if the cable is connected/broken. If I still cannot solve the issue, I will have to take it to the shop and hope I can fix it off warranty (I bought it second hand)
Dan
shadowsoulxp said:
Hi guys, I'm new to this forum so be nice :angel:
I am having the same problem in that none of the sensors are working which indicates that it is a connection issue or the actual hub not working or the firmware and not the individual sensors themselves.
[...]
I will try to find the firmware files and see if I can do a manual update. If that fails I will open up the phone and see if the cable is connected/broken. If I still cannot solve the issue, I will have to take it to the shop and hope I can fix it off warranty (I bought it second hand)
Dan
Click to expand...
Click to collapse
Thanks Dan for your reply.
I assume that your S4 shows the same behaviour as my one and the phone is still working fine.
The sensorhubtest failed and your light sensor for automatic adjusting and the sensor for turning the display are not working.
What is really strange that I went to a vodafone shop in Hamburg and ask them if there is any other one having problems with the S4.
You know the answer? They where wondering and telling me that this is wierd and they heard the first time of such an issue from me.
I showed them the device and showed them how I test the sensors. *#0*# funny they didn't know this combo
I hope that you succeed and share your knowledge,
with best regards.
___
DK

[Q] Galaxy S4 Sensor issues

Hi All,
I've been experiencing some sensor issues lately on my Samsung Galaxy S4 I9505. The issue is basically, that they don't work. After running tests and ensuring that it's not me being stupid, I sent it back for repair under warranty into Phones4u, (DO NOT ever do that if you take my advice) saying it's a hardware issue. That was in august (precisely on the 30st).
The first time the phone came back to me in september (25th) saying it had been repaired. And guess what, it had not. Same issues. (I'll skip the part where I complained over phone and emailed them and basically they ignored / didn't get back to me, or refused to give me a replacement phone saying I'm not with the ripoff insurance company they had offered) Cheers for that!
So I sent it back for a second round with an A4 sheet describing the issue in details.
After waiting almost a month - again - I got my phone back (yesterday.. Oct 19th) with the engineer's comments: "Couldn't find the problem."
Great!
BUT! Surprisingly, all sensors worked! wow!
But my joy didn't last long, as after a few hours the test Failed again. I restarted the phone and it turned out that restarting the phone helps SOMETIMES temporarily, and that's only confusing because I would've thought that I'm facing a hardware issue. But if they SOMETIMES work it must be a software issue.
So I went ahead and downloaded the latest OFFICIAL firmware (XXEUEMI8) with 4.3 android. With this I'm not voiding the warranty and keep the binary counter on 0 just in case it has to go back again. (Oh yes, the phone hasn't been rooted. )
But no, didn't work. Still the same issues.
In the video here you see my latest factory reset and sensor tests.
Any ideas? Suggestions? Maybe someone with similar issues?

Need Help! Camera not working

Hi everybody, I'm new to this forum and this is my first question here. I hope you bare with me .
Now, I have LG G2 international version. I bought it used and the guy who had it before me told me that it was water damaged and the only thing that didn't worked was the camera. I bought a new one and put it in place today but it still won't work. I can hear the click sound when it turns on but then there is this error message that pops up that says, "Sorry, the camera has stopped". The same error message was also there before I installed the new camera.
Anyone here who have any idea what is wrong? Is there any chance for me to get the camera fixed or is it something else that got damaged when the water hit the phone?

Camera Update Firmware error

Wondering if there is a common fault with the S4 camera. When trying to use it, it gives me a firmware updating error. The Rear camera never starts up. The front one is fine. I have recently tried to replace the camera with another one and when I turned on the phone it gave me the firmware updating prompt even before I started any Camera App. Is this an actual Firmware issue or is the Main board kaput?
Thanks for any advice

S7 Edge - Freezing and random rebooting

Hey all,
I have a galaxy s7 edge that's 2 months old. It's randomly freezing which is forcing me to do a hard reset or rebooting. I have done a factory restart by the settings, I have done a factory restart by holding the power, home and volume up key and lastly I have done a smart switch emergency thingy-me-bob.
The phone has never been rooted or messed around with in that matter and was working flawlessly up until this point. It's running all the latest updates you can get OTA - My next step tomorrow is to go into store for them to essentially repeat what I have done for several months...wondering if anyone here has any ideas of anything else I could try? Hoping it isn't a hardware defect.
Cheers,
Tom
Had exactly the same issue. Ran it in safe mode and it still froze. Factory reset - still the same problem. Sent it off to Samsung and got it back a few days ago along with the usual note explaining that the fault had been identified, latest software had been installed and it had passed through quality control. Went through setup and within an hour it was freezing again. Not convinced Samsung did anything other than re-flash the firmware and send it back. I'm guessing that this is a hardware issue, as I have read many posts with people experiencing the same issue. It's going back tomorrow so they can try again, with a note in the box, politely asking them to dig a little deeper....
Did another factory reset and it's frozen while on the always on display svtren. Think I'll be leaving a note asking them to do a physical hardware check!
You have latest software?
As per the original post, everything is running on latest.
Any way, visited the 'Geek squad' who informed me that I had done a factory reset wrong *sigh* restarted it infront of me and would you believe it! crashed. They're now sending it to Samsung to look at who I assume will just flash it again.
Very very disappointed with the edge, compared to my OP3T it's so sluggish.
had the same problem. had to send mine to samsung. there was something wrong with the partitioning i think but in some way odin couldn't fix
Fingers crossed it's something like that is wrong with mine!
I have exactly the same problem.
I'm in aus, and bought the phone from HK, so I'm a bit reluctant to send it back to HK/China.
I've done everything... but still the same.
rockuman_ex said:
I have exactly the same problem.
I'm in aus, and bought the phone from HK, so I'm a bit reluctant to send it back to HK/China.
I've done everything... but still the same.
Click to expand...
Click to collapse
From what I have read, it sounds like a hardware issue. The guy are the store was an utter moron but he did say the harder it is to the fix the more likely they are to just give me a new phone. Once i get it back ill share what they've done and see if it can help fix your issue.
Mine does reboot from time to time. Once a day, once a week...
Sometimes reboots when it stands alone on charging, sometimes in my pocket. I just realizes when my smartwatch vibrates to advert lost bluetooth conection.
Lastest firmware. I´ll probably will send to warranty.
I just recently got the S7 Edge. Great phone I just hates when it does that.

Categories

Resources