Help whit Motorola Defy+ (Second hand) - Defy Q&A, Help & Troubleshooting

Hi all, i just bought an (Second hand) Motorola Defy plus (Red Lens)
The fella i bought the phone from said to visit xda forum if i would like
to upgrade the phone to Jelly Bean or other roms.
So here i am and need a bit advise.
The current state of the phone is:
System version
45.0.2310.MB526.AsiaRetail.en.03
Model number
MB526
Android version
2.3.6
Baseband version
EPU93_U_00.60.03
Kernel version
[email protected]#1
Build number
4.5.1-134_DFP-231
And i dont know where to go from here (kind of lost since there are so many diffrent roms).
I would like to upgrade to Jelly Bean rom (the most stable one) and dont know if there are something
ells on the phone that need to be upgraded, the kernel or something ells?
Maby some nice person could take some time and write a newbie tuturial for me
where to go from whit the state of my phone now.
Bye for now!
Best Reg

Watch here http://forum.xda-developers.com/showthread.php?p=40767298
But to not make mistakes you should read the stickies threads.
Sent from my NexusHD2 using xda app-developers app

Betrosos said:
Hi all, i just bought an (Second hand) Motorola Defy plus (Red Lens)
The fella i bought the phone from said to visit xda forum if i would like
to upgrade the phone to Jelly Bean or other roms.
So here i am and need a bit advise.
The current state of the phone is:
System version
45.0.2310.MB526.AsiaRetail.en.03
Model number
MB526
Android version
2.3.6
Baseband version
EPU93_U_00.60.03
Kernel version
[email protected]#1
Build number
4.5.1-134_DFP-231
And i dont know where to go from here (kind of lost since there are so many diffrent roms).
I would like to upgrade to Jelly Bean rom (the most stable one) and dont know if there are something
ells on the phone that need to be upgraded, the kernel or something ells?
Maby some nice person could take some time and write a newbie tuturial for me
where to go from whit the state of my phone now.
Bye for now!
Best Reg
Click to expand...
Click to collapse
For a detailed process for rooting your defy plus go here
link: http://forum.xda-developers.com/showthread.php?t=1889325
For updating your phone to any higher version, visit this thread
link: http://forum.xda-developers.com/showthread.php?t=2258180
the Custom roms CM9(ics), CM10(jb, 4.1.2) and CM10.1 (jb, 4.2.2) are considered the best. You should download the latest Build.
good luck..!!
For further assistance reply to this post.
Please press thanks If I helped.
My devices>>> Motorola Defy plus MB526(running on CM10.1 11 may build, Quarx)
Samsung Galaxy y CDMA
Ubislate &c+ tablet

Hi,
you may also want to have a look at this post:
http://forum.xda-developers.com/showthread.php?p=38560698
The installation is from point 1 to 10.
Please be aware that it's a few months old (there are newer builds) and it also covers some performance hints (that may not be necessary with a newer build).
Have fun
empty

Related

Is this the Galaxy 3?

Good Afternoon Folks.
I am a bit lost at the moment don't really venture over to the Samsung phones as I don't have one myself.
However my wife does and its running a very old version of Android and I think its quite rubbish to be honest. I would like to root it and upgrade the rom to the latest that is possible. (I have done this with with my HTC Desire and many times in the past with WinMo phones)
Now I am not 100% sure if it is a Galaxy 3 or not and I was wondering if anyone can clairfy that for me. All the pictures of the G3 on the web are almost identical to her phone but they seem shorter and fatter
Her's was called a Samsung Galaxy Apollo I believe when she got it. I have also seen it being reffered to a I5800.
I have gone onto the About screen on her phone and listed some information here if that helps:
Model Number: GT-I5800
Firmware Version: 2.1-update1
Baseband Version: I5800XXJG3
Kernel Version: 2.6.29 [email protected] #2
Build Number: ECLAIR.B0JH1
Could someone please clarify to me if this is the G3 and if so the latest rom available or may even a link to a rom dev that is fairly stable and fast?
I am hoping for 2.3 but don't think that is about for this phone so I am guessing it will be 2.2?
Thanks, your help is greatly appreciated.
Regards,
Max
max_carpenter said:
Good Afternoon Folks.
I am a bit lost at the moment don't really venture over to the Samsung phones as I don't have one myself.
However my wife does and its running a very old version of Android and I think its quite rubbish to be honest. I would like to root it and upgrade the rom to the latest that is possible. (I have done this with with my HTC Desire and many times in the past with WinMo phones)
Now I am not 100% sure if it is a Galaxy 3 or not and I was wondering if anyone can clairfy that for me. All the pictures of the G3 on the web are almost identical to her phone but they seem shorter and fatter
Her's was called a Samsung Galaxy Apollo I believe when she got it. I have also seen it being reffered to a I5800.
I have gone onto the About screen on her phone and listed some information here if that helps:
Model Number: GT-I5800
Firmware Version: 2.1-update1
Baseband Version: I5800XXJG3
Kernel Version: 2.6.29 [email protected] #2
Build Number: ECLAIR.B0JH1
Could someone please clarify to me if this is the G3 and if so the latest rom available or may even a link to a rom dev that is fairly stable and fast?
I am hoping for 2.3 but don't think that is about for this phone so I am guessing it will be 2.2?
Thanks, your help is greatly appreciated.
Regards,
Max
Click to expand...
Click to collapse
yes! whatever info you have given indicates that the phone is a galaxy 3(and gt-i5801(Apollo)=gt-i5800) it means you can flash any firmware of gt-i5800 to gt-i5801 & vice-versa.
So, go ahead and flash any ROM like Indroid, Kyrillos, Destiny ROM or G3 mod etc using Odin multi-downloader(above listed are Froyo based custom roms) & almost all of them are good.
There is also a gingerbread based CM7 but it is in alpha stage, see if you like it. All these and more roms can be found in the Development sub-forum of galaxy 3. And yeah your phone IS galaxy3. Best of luck.
Hit thanks button if I've helped you.
Sent from my GT-I5800 using Tapatalk
Thanks for your reply that is very helpful.
One last question would you know the best rom for speed and power. I am looking for something fairly light as one of the reasons we are upgrading because she wants to play a game but with the standard rom half of the buttons appear white and very slow I am guessing this is because theres not enough power for the game to display properly.
max_carpenter said:
Thanks for your reply that is very helpful.
One last question would you know the best rom for speed and power. I am looking for something fairly light as one of the reasons we are upgrading because she wants to play a game but with the standard rom half of the buttons appear white and very slow I am guessing this is because theres not enough power for the game to display properly.
Click to expand...
Click to collapse
Galaxy 3 has a crap GPU with screwed up drivers, so it faces problems rendering some of the imersive graphics of the games.
You should first flash any good ROM as Kyrillos 8.0 or Indroid 6 and flash any OC kernel like G3Mod or fugumod and overclock your CPU using setCPU and also use Chainfire3d. But, first learn about the advantages and disadvantages of overclocking
Sent from my GT-I5800 using Tapatalk

[S+][ROM/Firmware] GB 2.3.6 - 3 Files - rooted I9000XXJVU by Stock+

Here is a latest ROM I9000XXJVU, rooted by Stock+ Team!
3 file ROM Type: 3 Files for flashing with ODIN (with PIT's & Re-partition) ~180MB
Kernel: I9000XXJVU Rooted (by Grooby)
3 file ROM Link: http://hotfile.com/dl/140338247/ef4c33c/3file_PDA_I9000XXJVU_CSC_XXJVU_MODEM_I9000XXJVU_ROOTED_stock.zip.html (by $omator)
NO MIRRORS PLEASE!
Just to make sure (and to avoid FC), please do clean cache and full wipe/factory reset after and prior to flashing.
(Remember that factory reset deletes all user installed apps!)
Remember to connect your phone to pc and run "RunMe.bat" after flashing, to copy all necessary binaries and profit with full ROOT!
Enjoy!
PS: Remember to join our service at http://samsung-updates.com/ or follow us on twitter at twitter.com/SamsungUpdates
"One stock+ Team to rule them all, One stock+ Team to root them, One stock+ Team to beat them all and in the happiness bind them" - Toolkien ;P
sorry for asking coz im a newbie. my SGS i9000 running :-
Firmware : 2.3.6
Baseband : I9000XXJVT
Kernel : [email protected]#2
Build Number : GINGERBREAD.XWJVZ
Either my Kernel is stock or custom? can explain to me please. thank you..
Need Help
Hi,
I installed your firmware.
Problems:
1)While using bluetooth handsfree, after the call ends, iam getting FC error - process.com.android.phone has stopped...
2)2/3 times the phone hangs.Need to take battery out.
3)2/3 times screen goes black,hangs and rebooted.
Solution Tried:
Installed FC fix for XXJVU. Now the phone FC problem didn't come.
But the battery drains very very fast.
Pls help me with a solution.
Thanks.
plz remove the S+ prefix in the name of the thread coz it's confusing, an S+ (i9001) member might flash it and brick his device.
Is this a stock GB rom? Asking because i want to remove this damn ICS CM9 Rom, half the crap i use doesnt even work :/ Youtube, Video Recording, USB File transfers.. etc
My phone information:
Model number: GTI9100
Baseband version: I9100XXKE7
Any help for installing the stock/rooted rom for my phone would be greatly appreciated <3
t1ck3ts said:
Is this a stock GB rom? Asking because i want to remove this damn ICS CM9 Rom, half the crap i use doesnt even work :/ Youtube, Video Recording, USB File transfers.. etc
My phone information:
Model number: GTI9100
Baseband version: I9100XXKE7
Any help for installing the stock/rooted rom for my phone would be greatly appreciated <3
Click to expand...
Click to collapse
ICS CM9 IS still in (early) development and You expect it to be perfectly working? LOL Only thing not working there for me are MMS so looks like u flashed in wrong way? I recorded video just last night,USB works fine(u need diffrent drivers) and YT does the job. Anyway YES this one is stock+root as title says. 3 files to flash with ODIN
Looking at your phone model, you are in the wrong forum.
This is only for GT-I9000 aka Galaxy S
Yours is GT-I9100, which is Galaxy S2
So please check it on Galaxy S2 area.
t1ck3ts said:
Is this a stock GB rom? Asking because i want to remove this damn ICS CM9 Rom, half the crap i use doesnt even work :/ Youtube, Video Recording, USB File transfers.. etc
My phone information:
Model number: GTI9100
Baseband version: I9100XXKE7
Any help for installing the stock/rooted rom for my phone would be greatly appreciated <3
Click to expand...
Click to collapse

question about my phone, Thanks for answering.

Hi everyone,. I have sony ericsson xperia x10 and has the following information:
baseband: 2.1.71.
kernel version: 2.6.29.00054-g5f01537 [email protected] #1.
Build # 1.9.16 (MIUI).
Do you think there's some upgrade I can do to the phone from the point of the information above? Thanks. (please provide me with information not with links only)
If you have OS version 2.3.3 ; which I guess, than no.
You could use kany from loads from custom ROMs instead
Your MiUI version is old, you should flash one of the new roms.
Oh, sorry overlooked that it is MIUI...
LzVebz said:
Your MiUI version is old, you should flash one of the new roms.
Click to expand...
Click to collapse
which ones do you suggest kardes? also I was meaning changing kernels probubly?? I don't know.. because the battery consumption is like a v8 car, annasini satiyim.

[Q] FROM SHADOW 134 to CM9

i dont know which threads to follow guys
i bought a moto defy with red lens (brayer) since January and when i got home
was very xcited to customize it so came to xda developers and got started (on the day of purchase) ...
downloaded superoneclick and some bits and pieces and flashed my phone...
well at first flash it stoped working
this is what happen when i don't read... stupid me
eventually i got it working back after 2 long struggling days ...
i flashed it with shadow 134 i think .. and after i got it working, i never tried anything else i was fed up...
But now i want to sort my defy out again...
This is my device info:
System version: 45.0.10.MB526.Retail.en.GB
android vers: 2.3.4
Baseband: EPU93_U_00.5F.00
Kernel version: [email protected] #1
Build number: 4.5.1-134_DFP-10
so by all this info, i am able to understand that i have a fixed sbf which is CG6 (some1 corect me if i am wrong)
On top of that i have: (SUPERUSER, DEFY 2NDINIT 2.0, SYSTEM RECOVERY) installed on my defy
its a bit scary for me to go and flash it without any advice like before and get stuck again
so if any1 has any idea how can i move up to CM9 without having lots of trouble
i agree i can have a bit of trouble but not to much..
theres so many threads to follow and am not able to choose which one
Any Defy Xpert arround who may help
Thanks for Reading my lengthy post

[Q] [q] CLEAN INSTALLATION METHOD OF ANDROID 2.2 to 4.1

HI ALL,
I'm new to this updation process, i need to update my DEFY from 2.2 to 4.1.2. I rooted my mobile already now need to update to 4.1.2. i read the forum related to this issue, but everyone suggesting different methods of installation. can anyone guide me a clean installation method from the scratch.
xcan said:
HI ALL,
I'm new to this updation process, i need to update my DEFY from 2.2 to 4.1.2. I rooted my mobile already now need to update to 4.1.2. i read the forum related to this issue, but everyone suggesting different methods of installation. can anyone guide me a clean installation method from the scratch.
Click to expand...
Click to collapse
why don't you update your kernel from 2.2 to 2.3? And I think 4.1.2rom is not fluency for our defy . if you have the kernel 2.3,you may update to kitcat~
update your phone . you need pay attention to the following list .
1.Use the software named RSD,the file is sbf ,sbf will change your bl,so, you need to know what's your phone bl;
2.you need to now what's your defy's lens,it's red or green;
3.you need a rom which is .zip some rom don't need to think about the kernel but someone discriminate.
o it's the first time I reply in English,if I say something wrong or you can't understand.please forgive it . haha I have a bad English. and I think I need someone to fix my grammer error。and when i speek english I don't know what I said above。。。
THX for the reply
mdeche101644 said:
why don't you update your kernel from 2.2 to 2.3? And I think 4.1.2rom is not fluency for our defy . if you have the kernel 2.3,you may update to kitcat~
update your phone . you need pay attention to the following list .
1.Use the software named RSD,the file is sbf ,sbf will change your bl,so, you need to know what's your phone bl;
2.you need to now what's your defy's lens,it's red or green;
3.you need a rom which is .zip some rom don't need to think about the kernel but someone discriminate.
o it's the first time I reply in English,if I say something wrong or you can't understand.please forgive it . haha I have a bad English. and I think I need someone to fix my grammer error。and when i speek english I don't know what I said above。。。
Click to expand...
Click to collapse
thx for ur reply..:good:
my mobile model: Motorola Defy MB525
lens: green
Kernel version: 2.6.32.9
Firmware version: 2.2.2
1. can i install ROM MANAGER from play store and install the CWM and start the OS installation process??
2. while viewing other forums review..most of them suggesting 4.1.2 by Quarx is good.
Whats ur suggestion?? and ur English is good..everyone can easily understood
reply
xcan said:
thx for ur reply..:good:
my mobile model: Motorola Defy MB525
lens: green
Kernel version: 2.6.32.9
Firmware version: 2.2.2
1. can i install ROM MANAGER from play store and install the CWM and start the OS installation process??
2. while viewing other forums review..most of them suggesting 4.1.2 by Quarx is good.
Whats ur suggestion?? and ur English is good..everyone can easily understood
Click to expand...
Click to collapse
:victory: Sorry ,I hadn't used it ,the phone is my mother's.when she gave me ,I updated it to miui ,and the others,I think some of them is not beautiful some is very slow.so , then i used mokee42.2 ---mokee43---mokee44---cm11.... It's Q's the latest rom. now I think cm11 ‘art’ model is very good~
Kernel version: 2.6.32.9don‘t care of this.
take notice of :lens: green....Firmware version: 2.2.2
and bootloader: my bl=6
some roms ignore the bl .but some like The official package need it.

Categories

Resources