Database Users

CWM black screen problem

I was trying to flash the MS2GingerBeta5 ROM but after 4th step it stucked on white M logo so I flashed clean 2.2.2 Froyo, rooted and tried to get to the CWM but I couldn't. I'm getting only black screen after M logo and that's it. Could someone help me?

mkmck said:
I was trying to flash the MS2GingerBeta5 ROM but after 4th step it stucked on white M logo so I flashed clean 2.2.2 Froyo, rooted and tried to get to the CWM but I couldn't. I'm getting only black screen after M logo and that's it. Could someone help me?
Click to expand...
Click to collapse
After step 4 do not reboot the phone, stay within CWM and perform steps 5-11.

Yes I know but now is too late... now I can't even enter the cwm and restore the ROM...
MotoMilestone 2 & TapTalk

Aaaaaa God... I was trying to use the Droid X Bootstrap instead the Droid 2 Bootstrap! But that's strange. I am sure I've bought the D2B. And it has been working for first time when I was restoring the 2.3.4.
EDIT: No, I restored my 2.2.2 nandroid backup and there is the DXB Shame on me xD

mkmck said:
Aaaaaa God... I was trying to use the Droid X Bootstrap instead the Droid 2 Bootstrap! But that's strange. I am sure I've bought the D2B. And it has been working for first time when I was restoring the 2.3.4.
EDIT: No, I restored my 2.2.2 nandroid backup and there is the DXB Shame on me xD
Click to expand...
Click to collapse
Super. Mam nadzieje ze sie uda wgrac ten ROM, bo jest swietny.

I'm having a similar problem, but I was trying to install the all-in-one MIUI zip.
How did you solved your problem?

Sorry guys,
I have posted here an issue about the 5th step of the Gingerbread guide, but reading carefully the thread I realized that this is about CWM black screen, not de stuck M on the Gingerbread guide.
I'm facing that problem and I'm desperate.

thucksoft said:
I'm having a similar problem, but I was trying to install the all-in-one MIUI zip.
How did you solved your problem?
Click to expand...
Click to collapse
Are you using Droid X Recovery bootstrap or Droid 2 Recovery Bootstrap? You need this second one. In other way You will get black screen
levicm said:
Sorry guys,
I have posted here an issue about the 5th step of the Gingerbread guide, but reading carefully the thread I realized that this is about CWM black screen, not de stuck M on the Gingerbread guide.
I'm facing that problem and I'm desperate.
Click to expand...
Click to collapse
Boot your phone to the bootloader mode (vol down + camera + power), connect usb, in RSD Lite chose FixedSBF (it have to be placed on C:\ and named f123.sbf) and click start to flash it. If you didn't do the 5th step, you can do this after flashing fixedsbf
MotoMilestone 2 & TapTalk

Hi mkmck,
I could make it. Thankyou for the answer.
After that, I have faced some issues and SOLVED them all, except for the $ key, changed to ₤.
I'd like to post my impressions about the rom, o the good ones and the bad ones. Where I should post? Should I create a new thread? In the general group?
Thank you all.
Sent from my A953 using XDA App

Great that I could help You Post your impressions here
http://forum.xda-developers.com/showthread.php?t=1169038
or here
http://forum.xda-developers.com/showthread.php?t=1140839

[q] my phone is bricked!! Help!!

I was installing Root explorer and my phone restarts and enters bootloop. I am a noob. Please help me with intructions on how to unbrick my phone. I can only enter FTM mode. HELP HELP.

I'm afraid you'd have to recover using adb,fast boot or even a tpt with cwm.
Sent from my ZTE Blade using XDA app

There's a debricking guide on ModaCo. Check it out
Sent from my Supernatural Blade

Go to Google, and type 'zte blade firmware'....Click on the first link (modaco), and follow those instructions...
In short:
You will need to flash the firmware, and install a custom rom...
I had been in this situation, so I know...No worries..

there is a guide on modaco to fix your phone from FTM Mode i had a similar problem and that guide was great at fixing my phone mate give it a try

As you guys said , i went through this .. http://android.modaco.com/topic/339048-guide-flashing-firmware-to-bladelibra-via-windows/
But cant understand step 8 and 9. First they say cwm 5.0.0.2 is the version for gen 2 and then flash 4.0.05 again?

Yes, when i flashed my phone for the first time i flashed 4... and then had to re flash back to 3.0.2 because that is the version that works best for my phone.

Okay so i got it to work. Its 5.0.0.2 for my phone, since i got a Gen 2 phone. But i want Dell stock firmware Android 2.2 Where can i get it?

Tusharkamath said:
Okay so i got it to work. Its 5.0.0.2 for my phone, since i got a Gen 2 phone. But i want Dell stock firmware Android 2.2 Where can i get it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1530009

That link has expired. Any other links? Now since i have a custom rom on my phone. How do i install the stock rom without bricking my phone?

My phone is fixed. Thanks to allll you replied. Thank you

Tusharkamath said:
My phone is fixed. Thanks to allll you replied. Thank you
Click to expand...
Click to collapse
Its okay fella....Glad v could help....

I A fried has a problem his phone (XCD 35) is bricked and it wont pass the green android logo it just blinks at the screen, No recovery or any other screen what ever key combination he only gets the green logo.
Any help ?

rkkaranrk said:
I A fried has a problem his phone (XCD 35) is bricked and it wont pass the green android logo it just blinks at the screen, No recovery or any other screen what ever key combination he only gets the green logo.
Any help ?
Click to expand...
Click to collapse
Use the Modaco thread in one of the above posts.
Sent from my ZTE Blade using XDA app

[Q] Stuck on Acer Logo after install Jelly-Bean_4.1.2_CM10-FLE

Hi All, its my first post, since am getting stuck here.
I rooted my Iconia A500 last year when I purchased it, and it was working fine with Taboonay.
Yesterday, I tried to install [ROM]Jelly-Bean_4.1.2_CM10-FLEX_v6supercharged_Aroma(16-Okt-2012)[discontinued), and found out that I needed to install thor 173.
I did, and managed to install the rom. Howerer, when I rebooted - It STUCKS AT THE ACER LOGO crying:
Please advise what I did wrong.
Thnx

desiraz said:
Hi All, its my first post, since am getting stuck here.
I rooted my Iconia A500 last year when I purchased it, and it was working fine with Taboonay.
Yesterday, I tried to install [ROM]Jelly-Bean_4.1.2_CM10-FLEX_v6supercharged_Aroma(16-Okt-2012)[discontinued), and found out that I needed to install thor 173.
I did, and managed to install the rom. Howerer, when I rebooted - It STUCKS AT THE ACER LOGO crying:
Please advise what I did wrong.
Thnx
Click to expand...
Click to collapse
Have you also updated your bootloader? The CM10 ROM requires that you be on ics bootloader.
Sent from my A500 using Tapatalk 2

10507 said:
Have you also updated your bootloader? The CM10 ROM requires that you be on ics bootloader.
Sent from my A500 using Tapatalk 2
Click to expand...
Click to collapse
Hi 10507, and thanks for your quick reply.
No, I have not updated my bootloader, apart from updating to thor.
Kindly please advise.
Thnx

desiraz said:
Hi 10507, and thanks for your quick reply.
No, I have not updated my bootloader, apart from updating to thor.
Kindly please advise.
Thnx
Click to expand...
Click to collapse
And here you go..
http://forum.xda-developers.com/showthread.php?t=1622425
All info you need about updating your bootloader, can be found here. With the exception if you run into issues of course. But it runs about 85% successful for the 500.
MD

Moscow Desire said:
And here you go..
http://forum.xda-developers.com/showthread.php?t=1622425
All info you need about updating your bootloader, can be found here. With the exception if you run into issues of course. But it runs about 85% successful for the 500.
MD
Click to expand...
Click to collapse
Well thanks...I have followed all instructions, and did it!!!!!!!!!!!!!!!!!!!!
Many thanks !!!!!!!!!!!!!!!!!!!!!!!!!

Can anyone guide me through flashing my a500?

Hello guys
So I'm basically a noob when it comes to flashing.
I'm trying to install http://forum.xda-developers.com/showthread.php?t=1961469 rom
I've tried so many times trying to install it. even used rom manager and acer recovery installer.
So in bullet points this is where i am:
Acer a500 is rooted
Installed Clockworkmod rev 1.7 by thor2002ro for ICS bootloader(do they mean stock bootloader?) from acer recovery installer.
restarted the tab into recovery, but says recovery verified failed.
I dont know what to do now.
Can anyone please assist, and explain to me in really noob steps what to do now?

Adajan said:
Hello guys
So I'm basically a noob when it comes to flashing.
I'm trying to install http://forum.xda-developers.com/showthread.php?t=1961469 rom
I've tried so many times trying to install it. even used rom manager and acer recovery installer.
So in bullet points this is where i am:
Acer a500 is rooted
Installed Clockworkmod rev 1.7 by thor2002ro for ICS bootloader(do they mean stock bootloader?) from acer recovery installer.
restarted the tab into recovery, but says recovery verified failed.
I dont know what to do now.
Can anyone please assist, and explain to me in really noob steps what to do now?
Click to expand...
Click to collapse
for install of any custom ics/jb you need the unlocked bootloader.
for install of cwm or similar you need the unlocked bootloader first b4 u can use ARI.
Head to civatos bootloader thread.
read the op very carefully...then read it again....if u muck this up...it can be a long road back. if there is something you do not understand then please ask there are plenty of folk who will help, there's a blow by blow guide 1n my sig if u need pictures!!!
Sent from my GT-I9300 using Tapatalk 2

dibb_nz said:
for install of any custom ics/jb you need the unlocked bootloader.
for install of cwm or similar you need the unlocked bootloader first b4 u can use ARI.
Head to civatos bootloader thread.
read the op very carefully...then read it again....if u muck this up...it can be a long road back. if there is something you do not understand then please ask there are plenty of folk who will help, there's a blow by blow guide 1n my sig if u need pictures!!!
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
can you give a link to it?

Adajan said:
can you give a link to it?
Click to expand...
Click to collapse
I think the link he is referring to is this one.
You might want to follow this tutorial. I used it yesterday to root, unlock bootloader and install a CM10 ROM on my A500.
Good luck.

Adajan said:
restarted the tab into recovery, but says recovery verified failed.
I dont know what to do now.
Can anyone please assist, and explain to me in really noob steps what to do now?
Click to expand...
Click to collapse
Someone had similar problem just like yours and he fixed it so review his post here http://forum.xda-developers.com/showpost.php?p=33368225&postcount=5

Adajan said:
[*]restarted the tab into recovery, but says recovery verified failed.
Click to expand...
Click to collapse
I had the same issue yesterday using afterota. I tried installing a recovery by using an application from Google Play, but that didn't work. I think windows didn't install the apx driver in time while afterota was working. I retried the process with afterota and it worked the second time.
Hope it helps.

having probs posting links from my phone just Google "civato chickens guide unlocked bootloader" there are 4 steps to take b4 attempting the flash....and yes doing this with yr boot verified error should be OK .
as previous poster said using the auto apxFlash is easier
the other guides i spoke of are in my signature just click on the link
Sent from my GT-I9300 using Tapatalk 2

dibb_nz said:
having probs posting links from my phone just Google "civato chickens guide unlocked bootloader" there are 4 steps to take b4 attempting the flash....and yes doing this with yr boot verified error should be OK .
as previous poster said using the auto apxFlash is easier
the other guides i spoke of are in my signature just click on the link
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Thnx for the help. One thing tho, how do i get google playstore and that?

if u don't have access to a PC then flashing any type of custom rom or bootloader is impossible....honeycomb only for u
Sent from my GT-I9300 using Tapatalk 2

Adajan said:
Thnx for the help. One thing tho, how do i get google playstore and that?
Click to expand...
Click to collapse
nvm i just had to flash them

Soft Brick

Hey guys, i'm a new member to the xda forums.
I had a problem while rooted hope you guys can help out.
I recently bought a moto g4 plus(Only launched in india so far) which runs on android 6.0.1(Stock).
When i tried to flash supersu.zip from twrp i bricked my device. When booting it only shows moto logo and never procceds after that. I think its a soft brick coz i can reboot into twrp recovery. Is there any possible way to fix my device. BTW i'm using a mac and dont have windows. thanks in advance. I want to know how to reflash stock rom from recovery to remove brick. If you need any more details i will be ready to give.

I have the same problem
TanayROCKS said:
Hey guys, i'm a new member to the xda forums.
I had a problem while rooted hope you guys can help out.
I recently bought a moto g4 plus(Only launched in india so far) which runs on android 6.0.1(Stock).
When i tried to flash supersu.zip from twrp i bricked my device. When booting it only shows moto logo and never procceds after that. I think its a soft brick coz i can reboot into twrp recovery. Is there any possible way to fix my device. BTW i'm using a mac and dont have windows. thanks in advance. I want to know how to reflash stock rom from recovery to remove brick. If you need any more details i will be ready to give.
Click to expand...
Click to collapse
If you have somehow solved this please post how it would be really helpful

Yeah i fixed it. All the steps are given in the post by yeshwanthsnenoy - [GUIDE] Root & Restore to Stock

TanayROCKS said:
Yeah i fixed it. All the steps are given in the post by yeshwanthsnenoy - [GUIDE] Root & Restore to Stock
Click to expand...
Click to collapse
Good! I am experiencing the same issue. Were you now able to root after getting back to stock?