Hello. I changed my csc via both application and both the
1.Just type *#272*Device IMEI# at Phone dial pad.
but even though i even resetted the phone it displays
csc : I9300OJVBLH1
when i type
1.Just type *#272*Device IMEI# at Phone dial pad.
i see it selected TUR but it does not display TUR code when i type
*#1234#
thanks for help
Download csc select from play store select code you want install it
After phone reboots you will be on new code
Sent from my GT-I9300 using Tapatalk 2
MonsterMMORPG said:
Hello. I changed my csc via both application and both the
1.Just type *#272*Device IMEI# at Phone dial pad.
but even though i even resetted the phone it displays
csc : I9300OJVBLH1
when i type
1.Just type *#272*Device IMEI# at Phone dial pad.
i see it selected TUR but it does not display TUR code when i type
*#1234#
thanks for help
Click to expand...
Click to collapse
Originally Posted by plopingo
Changing csc not working on I9300XXDLJ2
azerty keyboard but hit Q instead of A
What can I do to fix this ?
Is csc related ?
Click to expand...
Click to collapse
Everyone having csc related problems.
Back up if required. Boot into stock recovery (shut down, press vol up+home+power to boot into recovery). It should apply the csc when you enter recovery mode. Then factory reset from within stock recovery. It should fix your csc.
Hit thanks if it helped you.
when press the below code service mode is coming but it's blank, how can i get it, because without it Z3X is not working.
please advise me someone.
*#9090#
sumonfd said:
when press the below code service mode is coming but it's blank, how can i get it, because without it Z3X is not working.
please advise me someone.
*#9090#
Click to expand...
Click to collapse
Please help me someone.
Hello guys,
I need your help guys!
I have no signal at WCDMA, it means signal lost, no 3g, if i switch back to EDGE, Signal is there, edge is on
Past week i had lost my IMEI, but recovered it by doing downgrade to 4.2.2 and restore IMEI by writting it by qpst.
I think my phone lost the RF Cal., My basband is not unknown but the product code is not active
Thread can be closed,
fixed it after doing erase efs at service mode then restored efs and wrote original imei back
Bordo_Bereli51 said:
Thread can be closed,
fixed it after doing erase efs at service mode then restored efs and wrote original imei back
Click to expand...
Click to collapse
Hi. I have the same problem. Do you need a box to do this?
pseudobluz said:
Hi. I have the same problem. Do you need a box to do this?
Click to expand...
Click to collapse
No dial *#0808#; select RNDIS - DM - Modem and apply
Install qpst on PC and their drivers;
Open Qpst config; add port, select diagnostic com port, then download EFS Professional
open it and click qualcomm nv tools, open it select com port and then connect,
go to third tab, tick IMEI(DEC) and write your given IMEI at the back of the lG Optimus G (found in your profile) and then click write and reboot
you have your IMEI, after then flash stock 4.0.3
Bordo_Bereli51 said:
No dial *#0808#; select RNDIS - DM - Modem and apply
Install qpst on PC and their drivers;
Open Qpst config; add port, select diagnostic com port, then download EFS Professional
open it and click qualcomm nv tools, open it select com port and then connect,
go to third tab, tick IMEI(DEC) and write your given IMEI at the back of the lG Optimus G (found in your profile) and then click write and reboot
you have your IMEI, after then flash stock 4.0.3
Click to expand...
Click to collapse
thanks, i'll try
and actually i have no optimug g, just old info, it's i9505
pseudobluz said:
thanks, i'll try
and actually i have no optimug g, just old info, it's i9505
Click to expand...
Click to collapse
then you need to downgrade to 4.2.2 and do the step and when you got imei back flash 4.4.2
if you are on new bootloader download 4.4.2 bootloader put it in 4.2.2 rom and flash and do the step and flash 4.4.2 stock again
Bordo_Bereli51 said:
then you need to downgrade to 4.2.2 and do the step and when you got imei back flash 4.4.2
if you are on new bootloader download 4.4.2 bootloader put it in 4.2.2 rom and flash and do the step and flash 4.4.2 stock again
Click to expand...
Click to collapse
I'll try later this day. Currently my IMEI is ok but can;t connect at all to 3g
Bordo_Bereli51 said:
No dial *#0808#; select RNDIS - DM - Modem and apply
Install qpst on PC and their drivers;
Open Qpst config; add port, select diagnostic com port, then download EFS Professional
open it and click qualcomm nv tools, open it select com port and then connect,
go to third tab, tick IMEI(DEC) and write your given IMEI at the back of the lG Optimus G (found in your profile) and then click write and reboot
you have your IMEI, after then flash stock 4.0.3
Click to expand...
Click to collapse
I've tried EFS Professional and my IMEI is fine, not damaged in any way. This is really strange.
pseudobluz said:
I've tried EFS Professional and my IMEI is fine, not damaged in any way. This is really strange.
Click to expand...
Click to collapse
flash stock firmware and flash modem twice if it does not work try the next step given below:
type this in dial *#12580*369# to check rf cal and say to me if it is none or has a date
Bordo_Bereli51 said:
flash stock firmware and flash modem twice if it does not work try the next step given below:
type this in dial *#12580*369# to check rf cal and say to me if it is none or has a date
Click to expand...
Click to collapse
I've tried and still nothing. As for the Main Version info:
RF cal: NONE
HW Rev.: Not Active
Ideas?
pseudobluz said:
I've tried and still nothing. As for the Main Version info:
RF cal: NONE
HW Rev.: Not Active
Ideas?
Click to expand...
Click to collapse
It seems that your Radio Information has gone. Mine says a date, but try this: type in dial *#27663368378#
go to [1]UMTS then to common then to nv rebuild and select load default NV if that does not work go again to nv rebuild and select nv restore
Bordo_Bereli51 said:
It seems that your Radio Information has gone. Mine says a date, but try this: type in dial *#27663368378#
go to [1]UMTS then to common then to nv rebuild and select load default NV if that does not work go again to nv rebuild and select nv restore
Click to expand...
Click to collapse
Thanks, mate. But I've been impatient and left phone in Repair shop. I'll know the status during the evening. Will update later.
They've repaired it with box.
Bordo_Bereli51 said:
No dial *#0808#; select RNDIS - DM - Modem and apply
Install qpst on PC and their drivers;
Open Qpst config; add port, select diagnostic com port, then download EFS Professional
open it and click qualcomm nv tools, open it select com port and then connect,
go to third tab, tick IMEI(DEC) and write your given IMEI at the back of the lG Optimus G (found in your profile) and then click write and reboot
you have your IMEI, after then flash stock 4.0.3
Click to expand...
Click to collapse
when ai select RNDIS - DM - Modem the computer says usb not recodnized,what to do?where can ai find qpst and the drivers?
find on google galaxy s4 modem or diagnostic drivers
Hi.
I bought the Verizon Moto E (2015) XT1528.
I am trying to get LTE work in the Philippines and LTE bands here are different from what Verizon has enabled.
I'd like to ask if anyone has been able to add/unlock other LTE bands like the guide in the link below:
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
I am having problems searching for the code the access the USB Settings menu (step 6 of the guide above):
"Open the USB settings screen on your phone. Change USB from AP to CP. And USB settings from MTP + ADB to RNDIS + DM + Modem mode (after you have finished making edits in your phone's memory, remember to revert the original settings in this screen).
This is the hardest part of this mod as the USB setting menu is usually hidden and the method to access it is slightly different on some brands. For the S5, you can open it by dialing *#0808# . Other phones may use *#7284# , *#8778# , *#*#8778#*#* , ##3424# or something else entirely. "
Any assistance would be greatly appreciated.
Thank you!
benitz8 said:
Hi.
I bought the Verizon Moto E (2015) XT1528.
I am trying to get LTE work in the Philippines and LTE bands here are different from what Verizon has enabled.
I'd like to ask if anyone has been able to add/unlock other LTE bands like the guide in the link below:
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
I am having problems searching for the code the access the USB Settings menu (step 6 of the guide above):
"Open the USB settings screen on your phone. Change USB from AP to CP. And USB settings from MTP + ADB to RNDIS + DM + Modem mode (after you have finished making edits in your phone's memory, remember to revert the original settings in this screen).
This is the hardest part of this mod as the USB setting menu is usually hidden and the method to access it is slightly different on some brands. For the S5, you can open it by dialing *#0808# . Other phones may use *#7284# , *#8778# , *#*#8778#*#* , ##3424# or something else entirely. "
Any assistance would be greatly appreciated.
Thank you!
Click to expand...
Click to collapse
Check here please,
http://forum.xda-developers.com/moto-e-2015/general/how-to-verizon-moto-e-2015-gsm-network-t3098953
Hello
Wondering if anyone could give me a hint of which stock firmware I would need in order to get options in the hidden menu available and thats compatible with Samsung GT-I8730.
Currently running Android-version 4.1.2 original stock firmware.
Trying to unlock SIM, using Chimera but gets stuck at 19%, when a popup-window tells me to enable Diagnostic Mode (DM) by using *#0808# or *#9090# or *#7284# in dial window
The two first options nothing happens at all and dialing *#7284# brings me to PhoneUtil with options UART, Modem or PDA, where PDA was default but there is no USB section available.
Also I would need the *#9090# to set Diag config to USB-value.
Am new at this and would be grateful for any help I can get
Riondorx