Related
All,
per positive response below is a link to a copy of ivanmmj Eris_Official 1.0 ROM that I have fully deodexed. This is more meant for devs for continued play time, but it is a flashable ROM. PLEASE NOTE that ivanmmj himself looks to be coming out with the next version of Eris_Official 1.0 per his thread http://forum.xda-developers.com/showthread.php?t=652044.
Hope this is helpful and Enjoy
Link: REMOVED FROM HOST SERVER
P.S. please let me know of any issues as this is my first full deodex also I would like to encurage using this tread to exploring moding some of the system files on Eris ROM builds as it has been fun to tweak things
P.P.S. If you want the Zanfer kernel let me know and I will look at adding it in however ivanmmj's new version should have it...
what is Deodex?
I'm definitely interested, but I also think Ivan is working on the same project himself. I'm pretty sure his "1.1" is deodexed and has Zanfur's kernel. Not sure what other changes he has in mind, but you might want to check with him before posting since you'll end up being the one getting all the PM's from people wanting help. ;-)
Yes please I'm looking for exactly that
-------------------------------------
Sent via the XDA Tapatalk App
That would be awesome.
Sent from my Eris using XDA App
BTW jcase's plain jane1.0 has zanfur overclocking kernel.....
i dont know what you think but it might be a better platorm than ivanmmjs
a deodexed version of that would be tight....
kernels are easy to compile and swap out, a different kernel isnt going to influence the build at all
i always seem to get better battery life from the non oc'ed kernel.
Morkai Almandragon said:
what is Deodex?
Click to expand...
Click to collapse
Yes, what does that mean ?
hallstevenson said:
Yes, what does that mean ?
Click to expand...
Click to collapse
it means you have a classes.dex file rather than a .odex file
it makes things easier, its also possible to metamorph these builds and its possible to install a deoexed app on multiple platforms.
anonomouse said:
it means you have a classes.dex file rather than a .odex file
it makes things easier, its also possible to metamorph these builds and its possible to install a deoexed app on multiple platforms.
Click to expand...
Click to collapse
Means I can finally modify Rosie.apk to my liking.
hallstevenson said:
Yes, what does that [deodex] mean ?
Click to expand...
Click to collapse
A more experienced developer can add more but a few quick basics:
.odex files are precompiled class flies that correlate to a .apk or .jar file. In an odex ROM an .apk/.jar file will not function without it's correlated .odex.
a deodex build takes all of the .odex files converts them to a classes.dex and puts them into the .apk or .jar file package
deodex ROM are easier to mod because each .apk or .jar is a "complete" package and can be more easily decompiled and ported (i.e. you do not have to worry about the .odex files)
A deodexed build requires less space in /system, but more space in /data
A deodexed build requires a longer initial boot because they must regenerating those odex files from the dex files in the .apks/.jars and save them to /data/dalvik-cache
Thats a quick list of what I know
odex only help speed up app loading time and first time boot. Think of this as Windows' prefetch.
If you want to re-create odex for apk for porting, etc... I suggest only do this to /system/app not /data/app because when you do update from market and your app will break, unless you wipe out dalvik-cache.
zach.xtr said:
This is more meant for devs for continued play time, but it is a flashable ROM.
Click to expand...
Click to collapse
Would this be ok for an every day ROM? Or should it just be used by dev's as a base ROM?
Hey guys I've been testing this for Ivan. same thing he has a version deodexed.
I edited this
http://forum.xda-developers.com/showthread.php?t=664951
to work for this rom. which works great, but I get an error of
com.htc.bgp because of it, does anyone have any idea why?
Romparoo said:
Would this be ok for an every day ROM? Or should it just be used by dev's as a base ROM?
Click to expand...
Click to collapse
Technically it is fine as an everyday ROM, however I do not recomend using it for such because it is not support and will have no additional features over ivanmmj origional 1.0.
So I guess, yes it meant to be used as a base ROM or "spare parts" for devs.
BlazeD OnE said:
Hey guys I've been testing this for Ivan. same thing he has a version deodexed.
I edited this
http://forum.xda-developers.com/showthread.php?t=664951
to work for this rom. which works great, but I get an error of
com.htc.bgp because of it, does anyone have any idea why?
Click to expand...
Click to collapse
Someone else did this, on androidforums.com. I haven't replied to his posting, but it's in like page 19 of the 'show off your UI layout' thread there. I'm working on a modified Rosie.apk right now, as soon as I get this de-odex'd Ivan's on my phone running. Titanium backup here I come.
FYI, I was able to flash the deodexed version over the original Eris_Official 1.0 Alpha without having to do a full wipe (just wiped dalvik-cache). Naturally, I went back and re-flashed Zanfur's overclock kernel after that.
Hy guys today I come with something new for you, a new RAM script for better RAM management and smoothnes and more...
Before you install you should :
-be in android 2.3.*(gingerbread)
-having a custom kernel that support init.d (like CF-RooT,CM7 kernel)
-Delete any other script for RAM like supercharger v6 in system/etc/init.d
-install from CWM4 or 5 no problem
-Reboot and enjoy
Features:
1.Some good battery tweaks
2.Best low memory killer settings for better free memory and multitasking
3.Boost sd card speed from 256 to 2096
4.If cache size is too large it shifts it to ./cache folder .so better cache handling
5.Build.prop tweaks
6.Screen tweaks like LCD density and dirty ones for same reason good battery
7.Less aggressive settings for kernel.
8.Zipaligner script.
9.Better vm management and values.
10-Turbo charger!!!( so no need for any other RAM manager)
11-Compatible with tubro boost by Gadgetcheck!!!
12-Compatible with build.prop tweaks.
13-And MORE...
Download(Mirror):
V1:http://www.multiupload.com/UIZX1A0ON0
V2:http://www.multiupload.com/JXQ26JOGE7
V3:http://www.multiupload.com/QFSRMA5EOO
-Updates will come when they are ready
-don't say just thx but Press the thanks button and rate the post if you like my work!!!
Reserved for future use
Changelog of V2
-Add some new tweaks
-now MORE compatible with build.prop tweaks
-Save More Battery when phone is sleeping
Changelog of V3:
-new Script!!!!
-Now Compatible with turboboost V8.5 by Gadgetcheck
-Add a RAM turbo charger
-More calibraited script(between dalvik and Memory.....)
-More light scripts 12 kb
Tks u This is one of the greatest scripts
most awsome script guys .i loved the most it rocks..............
Here is list what u will get with script-
1.some good battery tweaks
2.best low memory killer settings for better free memory and multitasking
3.change sd card speed from 256 to 2096 or2098 but effect is temprary.
4.if cache size is too large it shifts it to ./cache folder .so better cache handling
5.build.prop tweaks
6.screen tweaks like lcd density and dirty ones for same reason good battery
7.less aggressive settings for kernel.
8.zipaligner script.
9.better vm management and values.
10.many other minor tweaks
11.oh and in go launcher smoother scrolling
main thing guys just install and enjoy.it is good for ram,gaming and multitasking
Hit thanks if i helped you
As a beta tester for this script, i should say, this is awesome Using it for week and a half, pretty effective.
Will this work on CM 7??
EDIT: Just saw ur signature.. Will try on my CM7.. +1 for the effort..
what is the effects/features made by script on the phone ?
hey guys, I wanna try this script but Im not quite sure if Ive got the kernel requested above, can someone help me out?
Im currently using this CM7
CyanogenMod 7.2 cooper KANG RC0
The kernel I guess is the one made by ketut.kumajaya since this is posted in the thread where I downloaded the rom
"Thanks to ketut.kumajaya for kernel."
Can I install it?
Thanks in advanced.
PD. Can someone post a screenshot of the ram management?
alcachofita said:
hey guys, I wanna try this script but Im not quite sure if Ive got the kernel requested above, can someone help me out?
Im currently using this CM7
CyanogenMod 7.2 cooper KANG RC0
The kernel I guess is the one made by ketut.kumajaya since this is posted in the thread where I downloaded the rom
"Thanks to ketut.kumajaya for kernel."
Can I install it?
Thanks in advanced.
PD. Can someone post a screenshot of the ram management?
Click to expand...
Click to collapse
yes you can it support any custom kernel dude
abo treka said:
what is the effects/features made by script on the phone ?
Click to expand...
Click to collapse
Well i lot of stuff to improve smoothness and some battery tweaks try it and you will see
NJosh said:
Will this work on CM 7??
EDIT: Just saw ur signature.. Will try on my CM7.. +1 for the effort..
Click to expand...
Click to collapse
It works on any rom that have a custom kernel,if you want to check go to system/etc and sse it there a folder call it init.d then flash the script and enjoy
Thanks a lot for this wonderful ram scripts!
techno_cool said:
Thanks a lot for this wonderful ram scripts!
Click to expand...
Click to collapse
your welcome dude
Flashed it and it is working really fine on my ACE! Thanks for this
slaid480 said:
Well i lot of stuff to improve smoothness and some battery tweaks try it and you will see
Click to expand...
Click to collapse
i have already installed it
and in cwm told me "script enabled"
is that everything ? or should i have script manager or anything else ?
sorry for many questions, iam new on Android system. all time is on N8 (symbian)
Are you really expecting anyone to flash this?
You're not giving any details what it does, how it works and how it differs from the other scripts like allinone, supercharger etc...
downloadonlyaccount said:
Are you really expecting anyone to flash this?
You're not giving any details what it does, how it works and how it differs from the other scripts like allinone, supercharger etc...
Click to expand...
Click to collapse
dude other technecly stuff are to hard to explain, what I can say it make your ram work with adjusted valories+ handlet build.prop and some battery tweaks
abo treka said:
i have already installed it
and in cwm told me "script enabled"
is that everything ? or should i have script manager or anything else ?
sorry for many questions, iam new on Android system. all time is on N8 (symbian)
Click to expand...
Click to collapse
you should read carefully dude as I have sad in first post flash then enjoy
I decided to quit from using allinone ram script because of force closes and install this one. I'll edit my post after a few days of using.
(There are so many ram scripts... Which one is the best?)
Taracair said:
I decided to quit from using allinone ram script because of force closes and install this one. I'll edit my post after a few days of using.
(There is so many ram scripts... Which one is the best?)
Click to expand...
Click to collapse
well test an give your opinion,about forcecloses from allinone witch rom do you use???
EDIT : just saw your singnature cm7.1 , it's not normal i was using allinone last mounth no prob
A few tweaks from the devs here and there which vastly improve the current ics experience...
1. zeps supercharger
2. PapaSmurvs Smurfed out script(weird name but good script)
3. [email protected]'s tweakzv5 zip
Supercharger needs an additional services.jar patch which you can find in the thread, the other two work fine. They don't conflict and the smurfed out script tidies up the build.prop.
I've numbered them in the order I applied them, they work on both IceLite and Arconium v4 with no issues.
It helps if you give a short description telling us what the tweaks are about.
PapaSmurvs Smurfed out script also needs aditional patching of services.jar
I really like the supercharger tweak! Thanks
Sent from my LT15i using XDA
So, you had all the scripts on your phone at the same time? And everything worked okay? Cos I have supercharger running and I want to apply the third script.
Sent from my LT15i (Xperia arc) on KA ICSony
wondering if you could help me to locate the launcher, i've gone to data/data but still cant find it. im trying to install smurfed out
will these tweaks work on stock ics from sony?
rkanwar said:
will these tweaks work on stock ics from sony?
Click to expand...
Click to collapse
Sure.
Thanks for the tweaks OP.
Would like to know what these things DO.
I mean what are the downsides to them (and there must be downsides, as clearly Sony would have implemented what they do in the standard image).
Guys..I managed to root the stock ICS without unlocking the BL..so now can I install CWM?and how if u can help me...thank you so much for your help..and also I wanna know if these tweaks require unlocked BL or just root?
CrazyPeter said:
Would like to know what these things DO.
I mean what are the downsides to them (and there must be downsides, as clearly Sony would have implemented what they do in the standard image).
Click to expand...
Click to collapse
They're various tweaks to memory management, 3g speed, UI speed/smoothness and others. There's no downside, as such. The stock firmware can be pretty slow or laggy, these eliminate that.
omarfaieq007 said:
Guys..I managed to root the stock ICS without unlocking the BL..so now can I install CWM?and how if u can help me...thank you so much for your help..and also I wanna know if these tweaks require unlocked BL or just root?
Click to expand...
Click to collapse
CWM needs an unlocked bootloader, but the tweaks only need root.
sinkster©
Hi, how do I installl the service file thing for Supercharged?
How do I install Smurfed? It says I have an android launcher and trebuchet? I tried trubuchet last night but it froze when I booted up?
Good day!
Sir Savie and Sir Kurutsogi I would like to ask regarding kernel. By the way I am using stock rom DXLF1 and with Data2SD of Kurutsogi http://forum.xda-developers.com/showthread.php?t=1622052 wherein my sd card has ext3 partition and the internal memory was changed from 290mb to 1gb.
My questions are:
1. If I will use the kernel of Savie (which was used in Icecream Bread rom and EVO X2 rom), will my current Data2SD will still work? If possible where can I get the boot.img file of Savies kernel? Also Sir Savie I was confused when I was reading you thread on kernel, Sir Savie can I get a link from you on the kernel that was used in Icecream Bread rom and Evo X2 rom?
2. If I have installed your kernel Sir Savie, is there a need to install app like the Nofrills CPU or CPU tuner in order to fully used the functions of kernel like changing the governors, i/o sched and frequencies? Or in you kernel, the said apps (CPU Tuner etc.) is already included and once your kernel is installed, all is done?
3. For my usage of SGY wherein, I have the Ram Manager Pro app, Start Up Auditor app, will it still be needed once I used your kernel Sir Savie? What settings should i used in the governors, i/o sched and frequencies if I only used my phone only for texting, calling, playing games (some HD games like assassins creed) fpse emulator, mp3 listening? Currently now my phone can get 88 to 98 mb RAM usage whenever I used the Easy task killer during making my phone iddle? Will this also possible when using Sir Savies kernel?
Sir Savie and Sir Kurutsogi hoping for your response and I would like to apologize to other XDA members for my questions and hoping for your kind understanding.
Thank you
am I dreaming? (lol)
EDIT: please forgive me. I never saw a question addressed politely like this one
1. if you're using my data2sd kernel, then the answer is no. you still can use this data2sd by creating a script in init.d folder. plz check additional stuff section in that thread. you don't need to clean your sdext partition. follow the step 1-4, reboot, done. this method have several bug, I hope you understand with the risk.
2. I don't know if savie include the app inside the zip file. you need to install them manually. nofrills is commonly enough for the govs n iosched modification. no need to use cpu tuner if you already have nofrills.
3. less ram doesn't always give good performance in android system. using a tweak is a lot better than clear the ram manually since it consume your battery a lot. the explanation is quite long. try to google it a lil bit.
kurotsugi said:
am I dreaming? (lol)
EDIT: please forgive me. I never saw a question addressed politely like this one
1. if you're using my data2sd kernel, then the answer is no. you still can use this data2sd by creating a script in init.d folder. plz check additional stuff section in that thread. you don't need to clean your sdext partition. follow the step 1-4, reboot, done. this method have several bug, I hope you understand with the risk.
2. I don't know if savie include the app inside the zip file. you need to install them manually. nofrills is commonly enough for the govs n iosched modification. no need to use cpu tuner if you already have nofrills.
3. less ram doesn't always give good performance in android system. using a tweak is a lot better than clear the ram manually since it consume your battery a lot. the explanation is quite long. try to google it a lil bit.
Click to expand...
Click to collapse
Sir Kurotsugi thank you for your response. My apology for the polite posting. Its just I am new comer here and want to learn a lot from you experts.
Sir in your reply in question #1, it only means that data2sd can be used in savies kernel by creating script init.d folder but it results to bugs. So would it be best if I use savies kernel just used link2sd in order to save the 290 mb internal memory?
Lastly Sir in question #3 it is better to use custom kernel to achieve better ram management and battery used instead of my stock apps ram mgr pro start up auditor and easy task killer?
Sir please kindly reply if I got your advises correctly.
Thank you
savie's kernel support a lot of similar method like a2sd++, amarullz, sem, etc. you can try to use my akuro if you lil bit lazy to google it. for the ram question stuff, you can read this one http://forum.xda-developers.com/showthread.php?t=1767363&page=120
Wow.. Kuro help me to translate it.. lol..
My questions are:
1. If I will use the kernel of Savie (which was used in Icecream Bread rom and EVO X2 rom), will my current Data2SD will still work? If possible where can I get the boot.img file of Savies kernel? Also Sir Savie I was confused when I was reading you thread on kernel, Sir Savie can I get a link from you on the kernel that was used in Icecream Bread rom and Evo X2 rom?
Click to expand...
Click to collapse
EvoX2 use #60REV1
ICB use #6REV2
My latest kernel is #73REV
Data2SD i thing support in my kernel but not with a2sd draktemor. Just make sure to clean 2nd partition to reduce error.
2. If I have installed your kernel Sir Savie, is there a need to install app like the Nofrills CPU or CPU tuner in order to fully used the functions of kernel like changing the governors, i/o sched and frequencies? Or in you kernel, the said apps (CPU Tuner etc.) is already included and once your kernel is installed, all is done?
Click to expand...
Click to collapse
Yes if u wanna change freq, governor, and iosched. Im only use cpumaster application.
3. For my usage of SGY wherein, I have the Ram Manager Pro app, Start Up Auditor app, will it still be needed once I used your kernel Sir Savie? What settings should i used in the governors, i/o sched and frequencies if I only used my phone only for texting, calling, playing games (some HD games like assassins creed) fpse emulator, mp3 listening? Currently now my phone can get 88 to 98 mb RAM usage whenever I used the Easy task killer during making my phone iddle? Will this also possible when using Sir Savies kernel?
Click to expand...
Click to collapse
For all app that u say above i dont have it so u can try
For gaming use max freq with performance gov but for light use 312 with smartassV2 and sio its enough.
savie said:
Wow.. Kuro help me to translate it.. lol..
EvoX2 use #60REV1
ICB use #6REV2
My latest kernel is #73REV
Data2SD i thing support in my kernel but not with a2sd draktemor. Just make sure to clean 2nd partition to reduce error.
Yes if u wanna change freq, governor, and iosched. Im only use cpumaster application.
For all app that u say above i dont have it so u can try
For gaming use max freq with performance gov but for light use 312 with smartassV2 and sio its enough.
Click to expand...
Click to collapse
Sir Savie thank you for your response. Sir just a clarification, the Data2sd of Sir Kurotsugi which is installed in my phone will still work if I use your kernels?
What kernels of yours is the best to use Sir Savie from the three?
Sir Savie, do I still need the boot.img file in your kernels in order that the data2sd to work? Because the boot.img file that I have right now is from Sir Kuro. Sir please kindly include the boot img file for the three kernels which I will choose from.
Thank you again Sir Savie and hoping for your response
ariszon said:
Sir Savie thank you for your response. Sir just a clarification, the Data2sd of Sir Kurotsugi which is installed in my phone will still work if I use your kernels?
Click to expand...
Click to collapse
I never use data2sd from kurotsugi but if i see the script should not problem with my kernel.
What kernels of yours is the best to use Sir Savie from the three?
Click to expand...
Click to collapse
Its hard question, coz everyone have difference preference..
#60REV2 only different in cwm integrated with #60REV1
But for #73REV its minimalist kernel
Sir Savie, do I still need the boot.img file in your kernels in order that the data2sd to work? Because the boot.img file that I have right now is from Sir Kuro. Sir please kindly include the boot img file for the three kernels which I will choose from.
Click to expand...
Click to collapse
U can backup boot.img from kurotsugi..
For my kernel link just go to my thread in 1st post.. its zip file that can u install via cwm.. no need to put boot.img in /sdcard then use SGYbiCWM.zip
savie said:
I never use data2sd from kurotsugi but if i see the script should not problem with my kernel.
Its hard question, coz everyone have difference preference..
#60REV2 only different in cwm integrated with #60REV1
But for #73REV its minimalist kernel
U can backup boot.img from kurotsugi..
For my kernel link just go to my thread in 1st post.. its zip file that can u install via cwm.. no need to put boot.img in /sdcard then use SGYbiCWM.zip
Click to expand...
Click to collapse
Good day!
Sir Savie thank you for your response. I just check the three kernel of yours and choose the best according to my preference. Sir sorry for my noob question when you say minimalist it means just a simple kernel that can improve battery and ram usage?
I will just install your kernel through cwm and if I got problem regarding the data2sd, I will just ask question from you.
Thank you
ariszon said:
Good day!
Sir Savie thank you for your response. I just check the three kernel of yours and choose the best according to my preference. Sir sorry for my noob question when you say minimalist it means just a simple kernel that can improve battery and ram usage?
I will just install your kernel through cwm and if I got problem regarding the data2sd, I will just ask question from you.
Thank you
Click to expand...
Click to collapse
Maybe in battery less consume with smartassV2+sio 156-312freq uv -80mV.. but dont know bout ram management coz in my rom only 105-115 in first booting..
savie said:
Maybe in battery less consume with smartassV2+sio 156-312freq uv -80mV.. but dont know bout ram management coz in my rom only 105-115 in first booting..
Click to expand...
Click to collapse
Sir Savie i have already prepared the back up files for tomorrow I will gonna be installing your kernel. Sir please forgive me I have to ask this noob question? What do you mean by the SGYbiCWM.zip in your previous response below
For my kernel link just go to my thread in 1st post.. its zip file that can u install via cwm.. no need to put boot.img in /sdcard then use SGYbiCWM.zip
Sir I have downloaded your #60REV2 and #73REV and check it, i can find the SGYbicCWM.zip.
Also Sir Savie may I ask again, If I would be using a custom rom and your kernel, will this procedure be the best in order to avoid problems.
1. Flash first in chosen Stock ROM
2. Wipe data and dalvik cache
3. Install the custom rom
4. Install the savie kernel.
Sir hoping for your response and please forgive me If I have so many questions. Thank you for your support
ariszon said:
Sir Savie i have already prepared the back up files for tomorrow I will gonna be installing your kernel. Sir please forgive me I have to ask this noob question? What do you mean by the SGYbiCWM.zip in your previous response below
For my kernel link just go to my thread in 1st post.. its zip file that can u install via cwm.. no need to put boot.img in /sdcard then use SGYbiCWM.zip
Sir I have downloaded your #60REV2 and #73REV and check it, i can find the SGYbicCWM.zip.
Also Sir Savie may I ask again, If I would be using a custom rom and your kernel, will this procedure be the best in order to avoid problems.
1. Flash first in chosen Stock ROM
2. Wipe data and dalvik cache
3. Install the custom rom
4. Install the savie kernel.
Sir hoping for your response and please forgive me If I have so many questions. Thank you for your support
Click to expand...
Click to collapse
SGYbiCWM.zip is kernel flasher tools method from mai77 u can search coz its old thread but very usefull.. But my kernel is zip package and include that tools so u dont need it again but its very usefull tools if u wanna flash only boot.img file in /sdcard
Nandroid backup is must to reduce something bad.. Yupz u can use that method to install my kernel.. if u dont use custom rom.. after install stock rom u must root ur device then create /system/etc/init.d folder with rootexplorer application or similiar like that application..
Hope u understand with my bad english..
Enjoy ur experience to playing android.. dont worry with bootloop or softbrick coz we are here to help each other..
savie said:
SGYbiCWM.zip is kernel flasher tools method from mai77 u can search coz its old thread but very usefull.. But my kernel is zip package and include that tools so u dont need it again but its very usefull tools if u wanna flash only boot.img file in /sdcard
Nandroid backup is must to reduce something bad.. Yupz u can use that method to install my kernel.. if u dont use custom rom.. after install stock rom u must root ur device then create /system/etc/init.d folder with rootexplorer application or similiar like that application..
Hope u understand with my bad english..
Enjoy ur experience to playing android.. dont worry with bootloop or softbrick coz we are here to help each other..
Click to expand...
Click to collapse
Thank you Sir Savie now I got. That mai77, I already got it before when I use the boot .img of Sir Kuro. Its good that I learned a lot from you Sir Savie
Sir I am now doing installation today. Sir please confirm the procedures below if I am doing it right provided I have all the back ups and nandroid back up. I will be installing a custom rom plus you kernel
1. Flash first in chosen Stock ROM
2. Wipe data and dalvik cache
3. Install the custom rom
4. Install the savie kernel using cwm.
Thank you for your usual support
If i use 2nd partition just format as ext3 dont use ext4/2 to safety in backup and restoring..
Thanks..
savie said:
If i use 2nd partition just format as ext3 dont use ext4/2 to safety in backup and restoring..
Thanks..
Click to expand...
Click to collapse
Good day!
Sir Savie, I have successfully installed you kernel #73REV together with rom Next to ICS by Avijit Ghosh82 in my SGY.
Sir I have some observations regarding your kernel and hoping for your comment or advise. Please see below.
1. When Installed your kernel, I followed everything on your thread wherein use CWM Skin 180, i mount the system, then do custom installation so I can add up other governors, other io scheds, bacem tweak, and all other items found in the custom installation window. Then began installing. After installation it displayed success but in the upper portion (I forgot the exact term) written with the count is displayed 0. Then after exiting the installation window it show up installation success savie in the CWM Skin 180 window. Then I reboot. After reboot, I checked the Settings and Info, in the kernel, it shows the old stock kernel. So i repeat the whole process again 2 times but still stock old kernel name display in the Settings.
What I did is that I do the whole process again but I do not mount the system in CWM. Then after installing and rebooting and checking again in the Settings, it showed up the the name of your kernel.
Sir Savie, is there any effect with what I did when I don't mount the system at CWM but it installed successfully and the name of your kernel appears in the Setting Menu- About the Phone menu? Please enlighten me.
2. Upon installation I noticed some of the governors and io sched in the CPU master is not showing up. So I read your thread again and see the something screw in #73REV kernel in you thread and followed step 2 installation wherein I downloaded and extracted the GovIO-tweak-1.zip then copy all the files in the modules then paste it on the /sdcard/.system-replacer/lib/modules/* then reboot. After I checked in CPU Master, there is some 3 or 4 governors lacking and io sched all are present.
Sir Savie, will there any problems arise if it lacks 3 or 4 governors?
3. Then I also notice in the main option of CPU Master is use max 312 min 156 then smartassv2 then tick the apply on boot then at the io sched I selected sio then apply. Whenever I shutdown then turn it on again, in the CPU Master it boot up the settings in the main menu i encoded which is max 312 min 156 then smartassv2 there i have no problem because CPU Master follows my setting. But in the io sched same scenario off then on SGY from my original setting sio it always choose deadline.
Sir Savie how can I make sio as the default selection whenever I turn off/on SGY?
4. In the CPU Master I dont see the option for changing the undervolting. Sir is it okay I I don't have the option for changing the volt and run the default volt in #73REV kernel which is -80mV?
5. I used Link 2sd because the data2sd of Sir Kuro doesn't work on your kernel then i link the CPU master in SD card. Sir Savie, will there be problems in terms of using the CPU Master when loading or changing governors or io sched?
Sir Savie my apologies If I have so many observation. Sir Savie hoping for your kind responses with my 5 questions.
Thank you
ariszon said:
Good day!
Sir Savie, I have successfully installed you kernel #73REV together with rom Next to ICS by Avijit Ghosh82 in my SGY.
Sir I have some observations regarding your kernel and hoping for your comment or advise. Please see below.
1. When Installed your kernel, I followed everything on your thread wherein use CWM Skin 180, i mount the system, then do custom installation so I can add up other governors, other io scheds, bacem tweak, and all other items found in the custom installation window. Then began installing. After installation it displayed success but in the upper portion (I forgot the exact term) written with the count is displayed 0. Then after exiting the installation window it show up installation success savie in the CWM Skin 180 window. Then I reboot. After reboot, I checked the Settings and Info, in the kernel, it shows the old stock kernel. So i repeat the whole process again 2 times but still stock old kernel name display in the Settings.
What I did is that I do the whole process again but I do not mount the system in CWM. Then after installing and rebooting and checking again in the Settings, it showed up the the name of your kernel.
Sir Savie, is there any effect with what I did when I don't mount the system at CWM but it installed successfully and the name of your kernel appears in the Setting Menu- About the Phone menu? Please enlighten me.
Click to expand...
Click to collapse
If u in 73rev so just make sure in recovery mode (cwm) u mount /system before install zip package like re-install savie73rev_kernel.zip..
Dont worry in count 0 coz its bugs from aroma..
To change other kernel put other kernel in /sdcard/boot.img then follow step in above but in custom installation choose other kernel..
2. Upon installation I noticed some of the governors and io sched in the CPU master is not showing up. So I read your thread again and see the something screw in #73REV kernel in you thread and followed step 2 installation wherein I downloaded and extracted the GovIO-tweak-1.zip then copy all the files in the modules then paste it on the /sdcard/.system-replacer/lib/modules/* then reboot. After I checked in CPU Master, there is some 3 or 4 governors lacking and io sched all are present.
Sir Savie, will there any problems arise if it lacks 3 or 4 governors?
Click to expand...
Click to collapse
Yupz if im not wrong lulzactive, ondemandx, etc..
3. Then I also notice in the main option of CPU Master is use max 312 min 156 then smartassv2 then tick the apply on boot then at the io sched I selected sio then apply. Whenever I shutdown then turn it on again, in the CPU Master it boot up the settings in the main menu i encoded which is max 312 min 156 then smartassv2 there i have no problem because CPU Master follows my setting. But in the io sched same scenario off then on SGY from my original setting sio it always choose deadline.
Sir Savie how can I make sio as the default selection whenever I turn off/on SGY?
Click to expand...
Click to collapse
Go to setting in cpumaster then uncheck all..
4. In the CPU Master I dont see the option for changing the undervolting. Sir is it okay I I don't have the option for changing the volt and run the default volt in #73REV kernel which is -80mV?
Click to expand...
Click to collapse
I dont know is theres app to show voltage now.. just use voltage-info.zip u see ur voltage..
5. I used Link 2sd because the data2sd of Sir Kuro doesn't work on your kernel then i link the CPU master in SD card. Sir Savie, will there be problems in terms of using the CPU Master when loading or changing governors or io sched?
Click to expand...
Click to collapse
Nope, i use that too..
Sir Savie my apologies If I have so many observation. Sir Savie hoping for your kind responses with my 5 questions.
Thank you
Click to expand...
Click to collapse
Lol.. no problem as long i can.. sorry if my explanation confusing coz im bad in english..
Please read this carefully ! Don´t continue if you don´t understand the following easy statements !
1. I am not a Developer ! Nothing of the following Apps/Roms/Tools I post here are made by myself, I am just using them !
2. Do not follow this guide if you plan to use your SII the next 2 hours! (seriously)
3. If anything goes wrong, it is not my fault! It´s the way I made it...Please, think about every step you do, it´s your Phone
4. Do not follow this if you don´t know how to flash a Kernel or a custom Rom and you know that you will be to lazy to learn this with the help of this awesome XDA Forum (like I did)
5. If you find something confusing and can not find a Solution feel free to ask. But please, be nice !
6. English is not my Mom´s language and even tho I do like it, I am sure you will find mistakes. Sorry about this !
Click to expand...
Click to collapse
My Motivation
I do like Cyanogenmod as many of you do. Due to Samsung´s strange behaviour the CM Team still has a hard time with Google´s Jelly Bean on our Galaxy S2. It still causes troubles here and there, even tho the Developers did and do a amazing job on it. Many words, I know, ok, let me get the facts straight : I LOVE CM but I NEED some Samsung stuff.
In the past, with ICS it was possible, thanks to some very (very!!!!) good Developers, to dual boot Samsung ICS Rom and CM Roms. When Jelly Bean leak came out, we had to realize that this wasnt possible anymore as we now got the /preload partition because our /system partition wasnt big enough anymore to carry all needed files.
Even tho it is possible to use jazzk´s chameleon and CM Rom with DorimanX Kernel because jazzk didnt use the /preload partition, it was impossible to use another Stock or custom Samsung Rom.
That bugged me.
Thanks and Credits for all they have done to :
The Cyanogenmod Team for CM10.1
dorimanx for his awesome Kernels
tedascuen for sharing the stock XWLS8 Rom
_Sofos_ for sharing the XWLSD Rom
Goldieking and his Team for his awesome Mods
All those who helped me in this Thread (mentioned below)
Chainfire, of course for so much!
Jrummy Apps inc. for Root Browser Lite
The XDA Comunity for sooo much
My Wife for her Laptop and coffee
Forgot your Name ? Give me a hint!
Update 20.03.2013
I have been a bit lazy lately with all this but I tested some of the DorimanX Kernels. It seems that Kernel 8.3 and higher are more than OK now for booting both, CM and Sammy Roms. To me, as I didn´t follow all this very close, it got a bit confusing. Please read the last Pages, there are always some nice guys testing this & that AND they also give support.
Update 28.02.2013 Part 1
If you are looking for more different Setups / Videos & Tutorials, they are now in Post #6
Update 28.02.2013 Part 2
There has been a lot of confusion with several Updates in CM 10.1. While this is a very good Step ahead for Open Source Projects, it makes Dual Boot with Samsung based Roms a bit harder. dorimanx has been working hard to get it all running, even Dual boot between CM10.1 and XWLSD is possible but for me and many others, Camera and Video is broken in the Sammy Rom. I will edit this as soon as this is fixed because IMO his Version 8 is another Masterpiece.
But for now this will be a "dirty" or "faked" Dual Boot.
What you need :
- DorimanX 7.44 "LSD EDITION" (Thanks to THE RED BLUR for your help)
- Any AOSP/AOKP Rom you want to use
- PreLoadLSDrom.zip (More Details)
(This is an edited XWLSD Rom that fits into our /preload Partition. DON´T use as FIRST Rom, it has NO Kernel)
- Time
Now we start :
- Flash the AOSP/AOKP you want to use as FIRST (!) Rom
- Set it up and (optional if you need the boot.img or just to have a running System backed up) make a Backup from Recovery
- Flash the DorimanX 7.44 "LSD EDITION"
- Reboot into its Recovery and prepare 2nd Rom
- Install PreLoadLSDrom.zip
- Boot into 2nd Rom to see if it works
- Done for now
With this Setup you now have 2 independent Systems on your Phone. Flashing another Open Source Rom in FIRST will not touch your Sammy Rom as all (AFAIK) Open Source Roms don´t use/touch the /preload Partition.
Please note, flashing any Sammy Rom, that´s not edited for this, will delete this Setup.
As long as you are using one of the "older" Open Source Roms you can now boot both Roms from the DorimanX 7.44 "LSD EDITION"
If you use a Open Source Rom with the new Video Drivers (and all these things I don´t understand) you will now need to install the corresponding Kernel each time you want to switch between the Roms. For now, I can confirm that Dorimanx 8 runs perfect with CM10.1 (24th build) because I tested it. So, you may now flash the "LSD EDITION" for the LSD Rom or the DorimanX 8 Kernel for your AOSP/AOKP Rom. This is dirty for now but it´s safe and working. And I am sure there will be a fix for this, soon!
Update 28.02.2013 Part 3
I moved my first Tutorials to Post #3. This got way to confusing here.. Also, this Post is edited to make it easier for the People to find what they are searching for.
Greetings
Thomas
wow, that's amazing man! but dorimax gives me a lot of FC and reboots... I'll wait a week or two before doing this.
How it all began...
Please read this carefully ! Don´t continue if you don´t understand the following easy statements !
1. I am not a Developer ! Nothing of the following Apps/Roms/Tools I post here are made by myself, I am just using them !
2. Do not follow this guide if you plan to use your SII the next 2 hours! (seriously)
3. If anything goes wrong, it is not my fault! It´s the way I made it...Please, think about every step you do, it´s your Phone
4. Do not follow this if you don´t know how to flash a Kernel or a custom Rom and you know that you will be to lazy to learn this with the help of this awesome XDA Forum (like I did)
5. English is not my Mom´s language and even tho I do like it, I am sure you will find mistakes. Sorry about this !
Click to expand...
Click to collapse
My Motivation
I do like Cyanogenmod as many of you do. Due to Samsung´s strange behaviour the CM Team still has a hard time with Google´s Jelly Bean on our Galaxy S2. It still causes troubles here and there, even tho the Developers did and do a amazing job on it. Many words, I know, ok, let me get the facts straight : I LOVE CM but I NEED some Samsung stuff.
In the past, with ICS it was possible, thanks to some very (very!!!!) good Developers, to dual boot Samsung ICS Rom and CM Roms. When Jelly Bean leak came out, we had to realize that this wasnt possible anymore as we now got the /preload partition because our /system partition wasnt big enough anymore to carry all needed files.
Even tho it is possible to use jazzk´s chameleon and CM Rom with DorimanX Kernel because jazzk didnt use the /preload partition, it was impossible to use another Stock or custom Samsung Rom.
That bugged me.
What I had was :
- a stock deodexed and rooted Jelly Bean Rom by Samsung from here
- a CM 10.1 Rom from here
- THE DorimanX Kernel 7.44 from here
- Rootbrowser Lite from Market (don´t know how to link it, but you will find it)
- TIME
If you have what I had, you can try the following lines...
First of all, I flashed the stock deodexed and rooted Rom I mentioned above (thanks to tedascuen for sharing)
I finished the complete Setup of the Rom, including Google Account, WLAN settings..
Now :
- download Rootbrowser Lite from Market
- use Rootbrowser Lite (now called RB) to delete all apps from /system/apps that I don´t need/use
- after that, reboot into stock recovery by holding Volume up + Home + Power
- do a Factory Reset
- reboot the System and finish the Setup of the Rom (as above)
- download RB Lite from Market again
- use RB to copy big files from /preload/symlink/system/apps to a folder in /data/apps/ that I named "sysapps"
Big Files I moved :
- ClockPackage.apk
- MusicPlayer.apk
- SamsungIME.apk
- SecBrowser.apk
- SecContacts.apk
- SecEmail.apk
- SecExchange.apk
- SecGallery2.apk
- SecLauncher2.apk
- SecMms.apk
- SecPhone.apk
- VideoPlayer.apk
Click to expand...
Click to collapse
- now delete the old symlinks in /system/apps of the Files above (you will get some errors/FC while doing this)
- now switch to /data/apps/sysapps and start to create new symlinks with RB by longpressing the file and "create shortcut"
- switch to /system/apps again and paste the shortcut (important, do this one by one, show some patience)
- after you created all new symlinks, reboot the system, you will see, all apps work again!
- most of the other apps from /preload/symlink/system/apps will fit into /system/apps but don´t move useless apps like all apps containing "test" in their name or google plus (you can install that later from market) or "swype" or.... I am to lazy to write down all apps I didnt move but with a bit of common sense you will make it for sure.
- after moving the apps to /system/apps you will see that all apps you moved will be set to rw-r-r and all symlinks you created will be set to rwx-rwx-rwx, thats fine !
- reboot the phone, everything should work fine
If so...
- flash the DorimanX Kernel 7.44 and
- reboot into his recovery
- switch to dual-boot options and set up the 2nd Rom
- clone 1st Rom to 2nd Rom
- reboot into 2nd Rom just to check if it works (it will)
now...
- reboot into recovery and install the CM10.1 made by MCM from here
- after the installation has finished, reboot the system and let CM10.1 boot
(GAPPS are not needed, yet but you may install them before you boot into CM)
- I really hope the CM has booted fine, now open STweaks
- in STweaks, change OpenSource Gralloc to Samsung´s Gralloc
- reboot the system and check in STweaks if the change worked (Samsung´s Gralloc)
now...
- reboot into recovery and flash the DorimanX Kernel again (or use Odin)
- after that, reboot again and you will see the Dual Boot Screen, you can choose first or second Rom
- DONE !!!
Another Way was...
Due to my slow internet connection I will only provide the way and the updater script here. Anybody who likes to help may link the Rom with the updated files here, this would be very kind !
To do what I did I used this : Notepad++ and 7zip !
Ok, lets go !!
- copy the stock deodexed Rom I mentioned above (for the lazy people, Link) to your PC
- Use 7zip to unzip the Rom (or any other tool!)
- unzip the attached file and replace the updater-script in /META-INF/com/google/android/ (in the unzipped Rom)
- in the unzipped Rom, go to /preload/symlink/system and move the complete "app" folder to /data/app
- your data folder should look like this : /data/app/app
- delete the now empty /preload folder
- use 7zip to compress data+META-INF+system+temp folders again
- copy your new compressed ROM on your SD Card
- boot your phone into recovery and install your ROM
- done !
I just did this exactly that way (after editing the updater script) and it worked perfectly for me. I can´t tell about performance or problems as I just tested this to see if it will run. Any feedback is more than appreciated.
Click to expand...
Click to collapse
I didnt do this very often so please take it easy on me and don´t bash me to hell if it was a stupid idea or impossible to follow at all. It´s just the way it worked out for me after several hours of testing.
Credits and Thanks to :
The Cyanogenmod Team, especially mcm811 for CM10.1
dorimanx for his awesome Kernel
Chainfire, of course for so much!
tedascuen for sharing the stock Rom
Jrummy Apps inc. for Root Browser Lite
The XDA Comunity for sooo much
My Wife for her Laptop and coffee
Greetings
Thomas
Re: Dual boot Samsung Jelly Bean and Cyanogenmod 10 (my way to make it)
Nice work around :thumbup:
Sending...
CWM flashable .zip
Interesting approach!
Can someone try to make clean`n lite CWM flashable zip from XWLS8 to use it with dual boot?
I also miss some things from CM10.1 when same time there are some "must have" things on Sammy`s.
More tutorials / videos / links
MORE SETUPS / TUTORIALS / GUIDES / VIDEOS
A complete Guide to setup Resurrection Remix 3.1.3 and Omega v20 LSD made by jootanen is now here !
Thank you very much for this !!
A complete Guide to set up paranoidandroid 2.99 and NeatROM full LS8 made by jootanen is now here !
Thank you very much for this !!
A complete Guide to set up a modified XWLS8 with Amazing Rom DevDroid including Downloadlinks made by Urmas1 is now here !
Thank you very much for this !!
Now we even got a Video made by bombaybadboy ! Klick here to watch it!
Thank you very much for it !!
And yet another Video by bombaybadboy, DUALBOOT XYLON 4.2.2 with NEATROM FULL, klick here
Thank you very much for it !!
Thanks to THE RED BLUR for the Heads up, there is now a modified DorimanX Kernel to Dual Boot with XWLSD Sammy Rom!!! Klick here to find out how !!!
Once again, thank you and all the others very much !!!!
I made a very "lite" Version of XWLSD, if you like to see & test it, klick here
Please don´t forget to hit the "Thanks" Button if you like it. It is just a little Klick for you but, in my case, it leaves a big smile for us
22.02.2013
Thanks to the great Idea and work of hawkerpaul there is now another, way easier and more simple way to setup 2 Roms for Dual Boot ! (look here for his thread)
I will try to explain as good as I can with a Samsung Rom (XWLSD) that I modified to make it run with another, Kernel compatible AOSP Rom !
Once again, all Credits for the "Magic" of the ROMs go to their respective Developers. I just modified the Updater Script a little, removed a lot of "Bloatware" and moved as many Apps as possible to /system partition. The /preload/symlink/system/app folder only contains a few Apps and has only about 80MB now.
Now we can use the /preload partition with both Roms which gives us much more smoothness/speed and an overall more stable system!
Before you start please note !
- The "myLSDrom.zip" contains a modified DorimanX 7.44 Kernel that is able to run XWLSD Sammy Rom (Thanks to THE RED BLUR for the Heads up)(Post). So, for now, the 2nd Rom needs to be compatible with this Kernel or you need to search another Kernel for this by yourself. I can and will not support this as I am not a Developer but a simple User and I am very happy with this Setup right now.
- The "myLSDrom.zip" also contains Goldieking´s amazing TeamAllianceMod. Why ? Because I LOVE it.
- I removed as much Samsung Stuff as possible. Even Samsung IME got replaced by Xperia S Kexyboard from here. If you don´t like my Setup you can do this by yourself with a XWLSD Rom, just let me know if you need help. I will try to write down a Tutorial !
1. Download myLSDrom.zip from here
2. Download the Rom you like to have as second one
3. Download hawkerpaul´s GS2PreloadRestore v1.04 and GS2PreloadBackup v1.03 from here (Downloadlink not yet ready)
4. Put all Files somewhere on your SD Card (internal/external) where you will find it later
5. Install myLSDrom.zip as first Rom and set it up
6. Boot into Recovery and Backup the Rom
7. Run GS2PreloadBackup v1.03 to backup the /preload/symlink Folder (install zip from SD Card will start it)
8. Now install the 2nd Rom
- usually while we install a Rom, the /system partition gets formatted. When we install a ROM as second, the Kernel leads to /preload as system partition. That´s why we usually lose all Files inside /preload. Thanks to hawkerpaul, that´s no Problem anymore
9. Run GS2PreloadRestore v1.04 to restore the backup of our /preload/symlink
10. DONE !!!!
If you run into Problems, please do not quote this all!
Re: Dual boot Samsung Jelly Bean and Cyanogenmod 10 (my way to make it)
ohwarumbloss said:
I will provide a cwm Backup when I find the time, but this may take some time! Or maybe we find a Dev to make a real .zip to do the job
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I'm patiently waiting for the tests because I wondered use dual boot with the LS8 and CM10.
Sent from my GT-I9100 using xda premium
Updated
OP updated, please give me some Feedback, I hope it will work out !
Also, it would be very nice if someone could upload the modified ROM and provide a link (my internet is awesome slow...)
Thanks & Greetings
Thomas
ohwarumbloss said:
OP updated, please give me some Feedback, I hope it will work out !
Also, it would be very nice if someone could upload the modified ROM and provide a link (my internet is awesome slow...)
Thanks & Greetings
Thomas
Click to expand...
Click to collapse
Made by instructions, do not have time to test it today by myself.
link removed
Gimme feedback, share if slow etc.
EDIT: OP, you can put link to the first post.
Urmas1 said:
Made by instructions, do not have time to test it today by myself.
DOWNLOAD
Gimme feedback, share if slow etc.
EDIT: OP, you can put link to the first post.
Click to expand...
Click to collapse
Thank you very much !
Nevermind, I added it
Nice to see this, really !
Greetings,
Thomas
Sry guys, I got:
...
Opening package...
Flashing aborted
Seems not working this way
Re: Dual boot Samsung JB XWLS8 and CM10(.1) [Updater Script & TestRom added]
Looks like you proved me wrong about duel booting after all. Nice work :thumbup:
Sent from my GT-I9100 using xda premium
AW: Dual boot Samsung JB XWLS8 and CM10(.1) [Updater Script & TestRom added]
Urmas1 said:
Sry guys, I got:
...
Opening package...
Flashing aborted
Seems not working this way
Click to expand...
Click to collapse
I have made a "Lite" Version of the Stock Rom and will upload it now at my parents in law's home. Don't worry, give me 1 or 2 hours
Greetings!
Thomas
Sent from my GT-I9100 using xda app-developers app
AW: Dual boot Samsung JB XWLS8 and CM10(.1) [Updater Script & TestRom added]
bombaybadboy said:
Looks like you proved me wrong about duel booting after all. Nice work :thumbup:
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Nah, that was a complete different Situation and you were right
Sent from my GT-I9100 using xda app-developers app
The EASY way
Ok, now I think I got this running!
Please note, all warnings, thanks and credits are in the very first Post. Please make sure you have read and understand them all!!
Thanks for your Attention
Follow these few steps careful and you will end up like I did, with a CM10.1 and a Samsung Jelly Bean XWLS8 Rom on the same Phone.
1. Download your favorite CM 10 or CM 10.1 Rom
2. Download the modified Stock deodexed & rooted XWLS8 Sammy Rom from here or the FULL ROM provided by Troubadour666, thank you very much for this !!
- the modified Stock is very "Lite" but I will write down the way to get the missing files if you need them !
- the FULL ROM provided by Troubadour666 contains ALL FILES !
3. Copy both Roms and the DorimanX 7.44 Kernel to the root of your SD Card, or wherever, just make sure you´ll be able to find them later !
4. CAREFUL ! PLEASE DO THIS STEP BY STEP !!!
5. Install the "literom.zip" (the downloaded modified Stock Rom)
6. Let it boot completely (important) with the stock Kernel (important) (this may take a while but it will boot!!)
7. Now install the DorimanX Kernel and boot into its Recovery
8. Setup the 2nd Rom
9. Clone 1st Rom to 2nd Rom
10. Try to boot into 2nd Rom (I hope it will) and let it boot, just to make sure
11. Reboot into DorimanX Recovery, do a Factory Reset/Wipe all
12. Install the CM Rom of your choice (my choice : MCM´s builds, AWESOME!) and let it boot completely (Gapps are not needed right now)
13. CAREFUL ! PLEASE READ !!!
14. If you are using MCM´s CM 10.1 you need to (thanks to unexist6969 for that Info!!!!)
- start STweaks
- in systemsettings, change Gralloc to "Samsung Gralloc"
- exit STweaks and reboot once to check if Samsung Gralloc is applied
- if so, reboot into Recovery again
15. Install the DorimanX Kernel again (cwm or odin, I prefer CWM flash, never had problems or yellow Triangle)
16. Reboot, you just set up a nice running Dual Boot System ! Congratulations !!
Hint : If you run into a bootloop after step 16, hold Volume up+Home+Power till you enter Recovery and wipe cache and Dalvik cache, this will work
Click to expand...
Click to collapse
Please note : If you want to apply any visual Mod on this, you need to change a lot of things. An Example, I am using the Alliance AOSP Mod (AWESOME stuff,LINK) and I had to copy the Files manually because the Mod points to /preload..but don´t worry, copy n paste will do, they allready did all the MAGIC (seriously great stuff) !
If you miss Samsung Stuff follow these easy steps :
- Get the Full Rom from first Post
- inside you will find a Folder called "Preload" extract that on your PC
- copy the Apps you missed to your Phone SD Card
- now use Root Browser Lite to copy them to /data/apps/apps
- Longpress (RB Lite) the File and tap "create shortcut"
- Switch to /system/apps and paste the shortcut
- Do this with each File and reboot, DONE.
This may sound complicated but really, it isnt. Don´t be afraid to ask questions that are not answered here or in First Post!!
EDIT:
Important : All MIRRORS are very welcome as i don´t know how Google Drive handles Bandwith. Also, feel free to post your own Full or modded Versions here as long as you give propper Credits to the DEVELOPERS. Please keep in mind, we are nothing without them!
If your Version is confirmed to be working I will add it here (if you like).
Greetings & thanks for your Attention
Thomas
It Works
So as i say to you in MP, i download the files in post 9 (removed since)
and i repack it as a normal flashable ZIP , with WINRAR , i add last dori in too
and i flash it in second rom. before that i format second rom data and cache, wipe data/cache too.
so I boot and i m happy with my ls8n in rom2. thank's for that !
Re: Dual boot Samsung JB XWLS8 and CM10(.1) [ROM ADDED]
Script worked with neatrom full. Just needed rename sale to tmp.
Cloned 1st ROM to 2nd ROM and viewed current status and it didn't show 2nd ROM.
installed cm10.1 to 1st ROM and changed gralloc to Samsung.
Installed dorimanx 7.45 and booted but there wasn't any dual boot screen, just dorimanx logo.
I'll try this again later today with new steps
Sent from my GT-I9100
jootanen said:
Script worked with neatrom full. Just needed rename sale to tmp.
Cloned 1st ROM to 2nd ROM and viewed current status and it didn't show 2nd ROM.
installed cm10.1 to 1st ROM and changed gralloc to Samsung.
Installed dorimanx 7.45 and booted but there wasn't any dual boot screen, just dorimanx logo.
I'll try this again later today with new steps
Sent from my GT-I9100
Click to expand...
Click to collapse
Hey,
thanks for feedback!
I think the NeatRom Updater Script is very different to the Stock one but I seriously don´t know for sure. I can only tell that the way I described will work wih the Download I provided (tested by myself) and DorimanX 7.44. If you find the Time, try it with the Rom I provided (literom.zip) from Post #15 and follow the Steps again. If you run into Problems then, maybe me or another User will be able to help you.
But in generally I would expect the Problems in the different UpdaterScript.
If you want to use NeatRom you may still try my first way in First Post (manually moving the Files)
Hope that helped a bit!
Greetings
Thomas
Re: Dual boot Samsung JB XWLS8 and CM10(.1) [ROM ADDED]
OK, I'll test test ROM and see if it works. And test more with neatrom full
And do I have to do that gralloc thing? Can you explain why is this needed?
Sent from my GT-I9100
AW: Dual boot Samsung JB XWLS8 and CM10(.1) [ROM ADDED]
jootanen said:
OK, I'll test test ROM and see if it works. And test more with neatrom full
And do I have to do that gralloc thing? Can you explain why is this needed?
Sent from my GT-I9100
Click to expand...
Click to collapse
I can not really explain, I followed a hint from Unexist6969. Fact is, MCM's build will not run with DorimanX if you don't change it.
A wild guess is the Ram allocation to Graphics is different in Open Source Gralloc but if you want to go deeper into this you may ask a Developer.
Greetings
Thomas
Sent from my GT-I9100 using xda app-developers app