Database Users

New to the Nook Color

Hi I just got a nook color for 160 bucks off Craigslist. It is rooted running cyanogen mod 7 encore 7.0.2. I was wondering how to get miui ubuntu and bluetooth working. Also I'm new to this so if there is anything else you guys recommend it'd be great to hear about. Also when I first opened up rom manager it says I need to install a recovery and I accidentally installed a one for a different device and now I can't access the recovery and when I click on flash recovery and I click on nook color it says an error occurred while attempting to run privileged commands
Sent from my HTC Sensation 4G using XDA App

I dont have the links off hand, but you should be able to create a micro SD card with CWR on it and boot into it. From there you should be able to modify and reload everything onto the NC.
Essentially start from scratch. I recommend ditching 7.0.2 and using at least 7.1RC or one of the newer nightly builds. 7.0.2 doesn't have deep sleep and there have been a lot of fixes made in newer builds.

Welcome!
I would also recommend just starting from scratch, unless there is anything on the NC now that you desperately wanted to keep. Who knows what the previous owner did to it. I've personally installed CM7 (just go with the latest nightly) to emmc using these steps:
http://forum.xda-developers.com/showpost.php?p=11452450&postcount=19
If you want to go the SD card route, follow :
http://forum.xda-developers.com/showthread.php?t=1000957
There are steps in each thread about updating to a newer CM7 release. Bluetooth "just works" in any recent nightly. You can enable it in the networks settings panel. If you want to keep what you have, you might try going into the Applications settings and clearing data for Rom Manager (not 100% sure how to undo that setting). There are threads in the Android Development subforum for MUIU and Ubuntu, but [and I'm partial here], CM7 seems to be far and away the better option.

Just a side note here. Since I run bluetooth and host mode daily, I check out each nightly before playing too much. N 161 and 162 have comments about BT issues. If you really need BT, I have found 160 is rock solid.
Sent from my NookColor using Tapatalk

thanks much!

Now I'm REALLY confused

Ok, the more reading I do the more confused I get.
I have a nook 1.3 that I bought for my son. The reason I chose the nook was because I could put the market on it and give him the games he's always playing on my phone. I'd LIKE to keep the stock reader as well because he's only 7 and I like the read to me feature on it as well. My first attempt to root was an abject failure, and now with 1.4 coming out I'm totally lost.
From my poking around here is some of what I gather:
Some of that I gather is:
The market doesn't work when you use the current root files on 1.4. Or does it? There doesn't seem to be a consensus
Some nooks with 1.3 get the boot loop when using the two "current" nooter files (that's what I experienced), but you can use the older file and just have an older market
At this point, I'd really like to know what my options are. Right now I'm sitting at 1.3, and may (or may not...I think I might have goofed the first root process up) have one of those nooks that hangs. My #1 priority is the market, and #2 (or maybe 1A) is keeping the reader. What are my options for this? Or do I just create a bootable SD card and give him a plain Android tablet until this all washes out?

Girevik said:
Ok, the more reading I do the more confused I get.
I have a nook 1.3 that I bought for my son. The reason I chose the nook was because I could put the market on it and give him the games he's always playing on my phone. I'd LIKE to keep the stock reader as well because he's only 7 and I like the read to me feature on it as well. My first attempt to root was an abject failure, and now with 1.4 coming out I'm totally lost.
From my poking around here is some of what I gather:
Some of that I gather is:
The market doesn't work when you use the current root files on 1.4. Or does it? There doesn't seem to be a consensus
Some nooks with 1.3 get the boot loop when using the two "current" nooter files (that's what I experienced), but you can use the older file and just have an older market
At this point, I'd really like to know what my options are. Right now I'm sitting at 1.3, and may (or may not...I think I might have goofed the first root process up) have one of those nooks that hangs. My #1 priority is the market, and #2 (or maybe 1A) is keeping the reader. What are my options for this? Or do I just create a bootable SD card and give him a plain Android tablet until this all washes out?
Click to expand...
Click to collapse
May I suggest you start from the beginning. Samualhalff here has a great utility to take you to pristine stock. Apply the 1.3 update and use your bootable uSD, install Gapps (latest) and go a step at a time.
I've had success with the above ending up in CM7 7.0.0.3. You'll always have the "reader" using Aldiko, B&N or whatever you choice is.

skeeterpro said:
May I suggest you start from the beginning. Samualhalff here has a great utility to take you to pristine stock. Apply the 1.3 update and use your bootable uSD, install Gapps (latest) and go a step at a time.
I've had success with the above ending up in CM7 7.0.0.3. You'll always have the "reader" using Aldiko, B&N or whatever you choice is.
Click to expand...
Click to collapse
Ok, I guess it's time to display my ignorance.
First of all I think I AM at pristine stock, but what do I know? The nook came with 1.3 on it (just got it last week), and after my isues trying to root it the only way I was able to get it back working after beein stuck in the boot loop was with the "8 failed boots" method. My understanding that was akin to a factory reset so it was back to just like it was out of the box.
So that brings me to:
- I don't need to apply any updates to get it to 1.3, right?
- When you talk about my bootable uSD card, exactly what do you mean? The only thing I've created is the CockWorksRecoveryMod SD card to apply the ManualNooter files.
- I'm not sure what Gapps is (and I feel like I should)
- If I flash a rom, I understand I can download the B&N (or whatever) Android software, but I though the color stock reader (and only the out of the box reader) had the feature where it could actually read some books to you (a feature I think might be nice for a 7 year old)

Girevik said:
Ok, I guess it's time to display my ignorance.
First of all I think I AM at pristine stock, but what do I know? The nook came with 1.3 on it (just got it last week), and after my isues trying to root it the only way I was able to get it back working after beein stuck in the boot loop was with the "8 failed boots" method. My understanding that was akin to a factory reset so it was back to just like it was out of the box.
So that brings me to:
- I don't need to apply any updates to get it to 1.3, right?
- When you talk about my bootable uSD card, exactly what do you mean? The only thing I've created is the CockWorksRecoveryMod SD card to apply the ManualNooter files.
- I'm not sure what Gapps is (and I feel like I should)
- If I flash a rom, I understand I can download the B&N (or whatever) Android software, but I though the color stock reader (and only the out of the box reader) had the feature where it could actually read some books to you (a feature I think might be nice for a 7 year old)
Click to expand...
Click to collapse
OK. Guess maybe I mis-read your post! My fault!
Personally I have never gotten the "hang" of 8 Failed Boots. I have just wiped /data and /system then loaded stock.
If you are at stock 1.3 (and unrooted and no CWM) you can verify in Settings if you wish but it sounds as if you are.
Format your uSD using this. Then follow these directions. This will give you a good format on your card and help you create a working bootable uSD.
I post this as I have seen many uSD card not formatted correctly (never use windows format or your device to format..often corrupts)
You can also load whatever ROM you wish to instalkl on the card but flash it only after you have rooted and installed CWM.
Gapps is Google Apps. Installs Market.
HTH!

skeeterpro said:
OK. Guess maybe I mis-read your post! My fault!
Personally I have never gotten the "hang" of 8 Failed Boots. I have just wiped /data and /system then loaded stock.
If you are at stock 1.3 (and unrooted and no CWM) you can verify in Settings if you wish but it sounds as if you are.
Format your uSD using this. Then follow these directions. This will give you a good format on your card and help you create a working bootable uSD.
I post this as I have seen many uSD card not formatted correctly (never use windows format or your device to format..often corrupts)
You can also load whatever ROM you wish to instalkl on the card but flash it only after you have rooted and installed CWM.
Gapps is Google Apps. Installs Market.
HTH!
Click to expand...
Click to collapse
I tried to load stock back, but it seems that ANYTHING I tried to do (including the root) resulted in a boot loop on the "nook color" screen. It seemed that nothing I tried to do did anything but make it loop until I found the faild boot trick. I was even getting an error just trying to wipe the data, which had me worried.
When you talk about loading a ROM on the card and "flashing" it, is that to replace the nook OS with the ROM? I don't think I want to do that now since I'd like to keep the stock reader.
Ideally I'd like to just root and get the Market, but after my first failed attempt, learning that 1.4 is on the horizon, and that some 1.3 nooks seem to get the nook boot loop when using ManualNooter, I'm a little gun shy. At this point I'm thinking I may want to wait until someone has a stable root process for 1.4.
Does the nook have to be rooted if I want to boot an OS from the SD card? I'm thnking that may be my best compromise at this point.

Girevik said:
I tried to load stock back, but it seems that ANYTHING I tried to do (including the root) resulted in a boot loop on the "nook color" screen. It seemed that nothing I tried to do did anything but make it loop until I found the faild boot trick. I was even getting an error just trying to wipe the data, which had me worried.
When you talk about loading a ROM on the card and "flashing" it, is that to replace the nook OS with the ROM? I don't think I want to do that now since I'd like to keep the stock reader.
Ideally I'd like to just root and get the Market, but after my first failed attempt, learning that 1.4 is on the horizon, and that some 1.3 nooks seem to get the nook boot loop when using ManualNooter, I'm a little gun shy. At this point I'm thinking I may want to wait until someone has a stable root process for 1.4.
Does the nook have to be rooted if I want to boot an OS from the SD card? I'm thnking that may be my best compromise at this point.
Click to expand...
Click to collapse
Understand. Actually 1.4 is available right now for download from the Support section on BN site. If you wish, go ahead and get it, load it to the root of your NC, let it go to sleep and it will update automatically for you. (Directions on the BN site) If you wish to load CM7 for instance, you may wish to reload 1.3 for now as I don't see a 1.4 version yet.
Once that is done you will be at stock 1.4 (if you go that way). And yes, you can load your choice of ROM from the uSD. One of the really neat things about the NC is that it boots first to the uSD then to the internal. There are several choices in the Development section to choose from. Try out several and pick the one you like (I prefer CM myself) Keep in mind that booting from the uSD will not be as fast as if it was loaded to your internal but doing this will also keep your stock safe. And no, you need not be rooted to boot from uSD.
For example..... verygreen.
Let me know how it goes!

Ok, cool. So it sounds like my plan for now is to get 1.4 then boot off of an SD card. When and if we can root it successfully, I'll make that jump.
I asked this in another thread, but I'll do so hear as well. What happens to apps I download while booted from the card? Are they installed on the card or the nook internal memory? And if it's the nook memory, what happens when I boot to the nook?

Girevik said:
Ok, cool. So it sounds like my plan for now is to get 1.4 then boot off of an SD card. When and if we can root it successfully, I'll make that jump.
I asked this in another thread, but I'll do so hear as well. What happens to apps I download while booted from the card? Are they installed on the card or the nook internal memory? And if it's the nook memory, what happens when I boot to the nook?
Click to expand...
Click to collapse
Golly. It's been so doggeone long since I ran anything off the uSD....if I remember right.....Ya know....I believe everything runs from the uSD. I would sideload the apks. Lemme think about that one. That was like Months before last Christmas lol

For what you want, I would just do a MN Root of the stock Nook software. Then you wouldn't have to deal with switching back and forth between CM and stock.
---------------------------------
Sent from my LG Optimus V using Tapatalk

koopakid08 said:
For what you want, I would just do a MN Root of the stock Nook software. Then you wouldn't have to deal with switching back and forth between CM and stock.
---------------------------------
Sent from my LG Optimus V using Tapatalk
Click to expand...
Click to collapse
That's my long term goal. but is the root on 1.4 working yet? I tried to do the MN root (but may have missed a step) on 1.3 and got into a boot cycle. I was thinking I'd just let it upgrade then once all the 1.4 stuff was figured out do a root then

Girevik said:
That's my long term goal. but is the root on 1.4 working yet? I tried to do the MN root (but may have missed a step) on 1.3 and got into a boot cycle. I was thinking I'd just let it upgrade then once all the 1.4 stuff was figured out do a root then
Click to expand...
Click to collapse
From what I've read the 1.4 doesn't have reliable root yet. So you have two choices really. Leave as is and wait (I'm betting root will come to 1.4 eventually) or wipe (system/data) back to 1.3, load and MN/AN.

Girevik said:
That's my long term goal. but is the root on 1.4 working yet? I tried to do the MN root (but may have missed a step) on 1.3 and got into a boot cycle. I was thinking I'd just let it upgrade then once all the 1.4 stuff was figured out do a root then
Click to expand...
Click to collapse
I'm not sure about the progress of a 1.4 root but I do know that 1.2 is very easy to root as you only have to flash one file.
So unless you really want the small added features of 1.4 I would just revert to 1.2 and stay there until a 1.4 root is finalized.
---------------------------------
Sent from my LG Optimus V using Tapatalk

koopakid08 said:
I'm not sure about the progress of a 1.4 root but I do know that 1.2 is very easy to root as you only have to flash one file.
So unless you really want the small added features of 1.4 I would just revert to 1.2 and stay there until a 1.4 root is finalized.
---------------------------------
Sent from my LG Optimus V using Tapatalk
Click to expand...
Click to collapse
Can I revert to 1.2 if my nook came with 1.3 on it OOTB?

koopakid08 said:
I'm not sure about the progress of a 1.4 root but I do know that 1.2 is very easy to root as you only have to flash one file.
So unless you really want the small added features of 1.4 I would just revert to 1.2 and stay there until a 1.4 root is finalized.
---------------------------------
Sent from my LG Optimus V using Tapatalk
Click to expand...
Click to collapse
In doing this nooter on a 1.2 are you still able to have flash and the netflix app work? or do you have to have 1.3 or 1.4? I see 1.4 is bnn making netflix available, but im guessing if you root on a 1.3 you can gain access to the app? is it the same for 1.2? I have the netflix.apk file to sideload in either case. Just curious before I go wiping my nook and starting fresh (was gonna go with cm7 on a disk dual boot with 1.4) or go to 1.3 and manual nooter

miss_october said:
In doing this nooter on a 1.2 are you still able to have flash and the netflix app work? or do you have to have 1.3 or 1.4? I see 1.4 is bnn making netflix available, but im guessing if you root on a 1.3 you can gain access to the app? is it the same for 1.2? I have the netflix.apk file to sideload in either case. Just curious before I go wiping my nook and starting fresh (was gonna go with cm7 on a disk dual boot with 1.4) or go to 1.3 and manual nooter
Click to expand...
Click to collapse
Sure can. I ran Netflix on 1.3 (and I'm thinking 1.2 also) but I believe due to a small glitch one needed to modify the build.prop file. Very easy to do really And it works! The posts should still be in the forum. Search Netflix. That should get you what you need.

Girevik said:
That's my long term goal. but is the root on 1.4 working yet? I tried to do the MN root (but may have missed a step) on 1.3 and got into a boot cycle. I was thinking I'd just let it upgrade then once all the 1.4 stuff was figured out do a root then
Click to expand...
Click to collapse
Girevik, we exchanged messages on this topic in another thread. I wanted to let you know I've had some success with rooting 1.4.1 to the point that it might be suitable for what you want. See message 92 in this thread.
In short: You can sideload apps and run them in the B&N Walled Garden. You can't download or refresh apps, but you can work with sideloaded books and apps. It's not 100% stable yet, but I think with careful selection of sideloaded apps, it may be.

Girevik said:
Can I revert to 1.2 if my nook came with 1.3 on it OOTB?
Click to expand...
Click to collapse
Yes, you just need to flash the 1.2 zip
---------------------------------
Sent from my LG Optimus V using Tapatalk

miss_october said:
In doing this nooter on a 1.2 are you still able to have flash and the netflix app work? or do you have to have 1.3 or 1.4? I see 1.4 is bnn making netflix available, but im guessing if you root on a 1.3 you can gain access to the app? is it the same for 1.2? I have the netflix.apk file to sideload in either case. Just curious before I go wiping my nook and starting fresh (was gonna go with cm7 on a disk dual boot with 1.4) or go to 1.3 and manual nooter
Click to expand...
Click to collapse
Yes both will work on 1.2 and 1.3
---------------------------------
Sent from my LG Optimus V using Tapatalk

bobstro said:
Girevik, we exchanged messages on this topic in another thread. I wanted to let you know I've had some success with rooting 1.4.1 to the point that it might be suitable for what you want. See message 92 in this thread.
In short: You can sideload apps and run them in the B&N Walled Garden. You can't download or refresh apps, but you can work with sideloaded books and apps. It's not 100% stable yet, but I think with careful selection of sideloaded apps, it may be.
Click to expand...
Click to collapse
I think I saw that. I'll take a closer look, but to be honest right now I think my son will be be more likely to use the the straight Android boot to have access to the games he's always playing on my phone. I'm hoping that will change, but as this point I'm thinking I'm better off waiting until I can get the Market and Amazon Appstore on 1.4 and just getting the stuff he's used to playing with. I'd really like him to use the BN reader, but realistically I don't know how much he'd use that right now.
Frankly, it comes down to me not really wanting to go through the effort of sideloading the games he plays. I'd really just like to get it connected to the Market and Appstore and downaod the stuff he uses.

If I were you, I'd create a CWR bootable and flash CM7 or one of the other many available ROMs (possibly MIUI, I heard it's pretty top notch, somewhat akin to the layout of iOS). I find the NC's OS somewhat distasteful. I believe Dalingrin once said that he knew the NC better than its creators. Anyways, personal bias coming into account, I flashed CM7.1 and never looked back. It's completely up to you. If you do choose to take my advice, there are alot of good devs who can help you out with the process. Dalingrin and Fattire are 2 of my favorite devs.
I used to have a forum signature... then I took an arrow to the knee.

[Q] Cold weather returned my NC to stock !!

I purchased my NC used and with CM7 installed. I loved it the way it was except for the outdated flash player.
I forgot it in my car at work and it was all of 7* that night. Once I got home it took an hour to start up and now its just a regular NC, no Android. When I try to do the introduction registration, it connects to WiFi but tells me it cannot register at this time and gives a number to call.
I didnt mod the Nook what so ever but with the help of this site I did mod my HTC Incredible with excellent results. Id like to have Android on my NC like before but Id like to run a updated verison with Flash 11 if possible.
Please help a Nook Newbie !!! I know there is a TON of info on this device here but it gets pretty confusing pretty fast.

Was CM running on eMMC? I don't know why it wouldn't connect, but maybe something cold related caused the device to boot and continuously fail, doing the 8 failed boot restore?

You can't register it probably because the person you bought it from never de-registered it. Time to do a full reinstall of CM7. There are a ton of posts that describe how to do it in detail. Just use the search function.

LOL
You left your NC running CM7 (just to make fun, I assume it's installed in eMMC) in the car with temp. around 7 and after a nite, it automatically reverses back to bone stock, LOL
Man, if it's true, it gotta be an EASIEST way to restore stock ROM, crackinggg
Back to your case, for some reason, I do think your NC running CM7 off uSD and when it booted up, couldn't get into uSD so it booted directly to eMMC. Hope that's the case.

I bought it without an SD card so the mod was already installed on the NC internal memory. V
Ive read thru alot of info on here but still a bit confused. Im also wondering if having CM7 previously installed will cause me any problems trying to flash a different ROM.

pwrshft99 said:
Im also wondering if having CM7 previously installed will cause me any problems trying to flash a different ROM.
Click to expand...
Click to collapse
It won't if you wipe the caches for a full reload. Keep in mind that if you are the least bit hesitant you could just as easily make a bootable SD card and have no worries.

pwrshft99 said:
I bought it without an SD card so the mod was already installed on the NC internal memory.
Click to expand...
Click to collapse
For real???
How can that be possible?
I don't mean to not believing in you but it's too odd.

[Q] Trying to get back to 1.4.3 after ManualNooter

I used manualnooter, I was on stock 1.4.3 when I started. I followed the video and chose the 5.08.20 basic zip to keep B&N upgrade but no App2sd. Since MN my nook is back to 1.3.0. I added the update zip and flashed that with CWM and copied the update from B&N to my Nook, restarted and have had solid WIFI connection, yet my Nook will not upgrade. I have been able to get most of the apps I want from the playstore, but occassionally get an error message that the app is not compatible with my device. For example I can install Temple Run 2 but not temple run 1 or subway surfers. Is this because I am back to 1.3.0? Aside from playstore, is there any other benefit to upgrade now that I am rooted?
The only other issue I've had is once after turning Nook off and letting battery die, I was stuck in boot loop. When Nook restarted it brought me to CWM recovery to reboot which I wouldn't work. I had to wipe, factory reset and flash MN again. Third time seems to be the charm and I have problems when I turn Nook on or off.
Do I need 1.4.3 back? Should all apps on playstore install equally?
Lastly, any opinion on CM10 compared to MN?
The instruction on MN was so clear and easy, I'm tempted to try something new.
thanks for your time.

kellym said:
I used manualnooter, I was on stock 1.4.3 when I started. I followed the video and chose the 5.08.20 basic zip to keep B&N upgrade but no App2sd. Since MN my nook is back to 1.3.0. I added the update zip and flashed that with CWM and copied the update from B&N to my Nook, restarted and have had solid WIFI connection, yet my Nook will not upgrade. I have been able to get most of the apps I want from the playstore, but occassionally get an error message that the app is not compatible with my device. For example I can install Temple Run 2 but not temple run 1 or subway surfers. Is this because I am back to 1.3.0? Aside from playstore, is there any other benefit to upgrade now that I am rooted?
The only other issue I've had is once after turning Nook off and letting battery die, I was stuck in boot loop. When Nook restarted it brought me to CWM recovery to reboot which I wouldn't work. I had to wipe, factory reset and flash MN again. Third time seems to be the charm and I have problems when I turn Nook on or off.
Do I need 1.4.3 back? Should all apps on playstore install equally?
Lastly, any opinion on CM10 compared to MN?
The instruction on MN was so clear and easy, I'm tempted to try something new.
thanks for your time.
Click to expand...
Click to collapse
First, just because Play Store says an app is incompatible does not mean it will not run. It just means they will not let you install it. So you have to get it somewhere else, like the Amazon Store, 1Mobile Store or somewhere else.
Second, you can easily update to 1.4.3 using CWM. See my NC tips thread linked in my signature. See item A15.
And the reason your device got stuck in a bootloop is because you replaced your stock recovery with CWM. See my item A12.
And CM10 is head and shoulders above NC stock, even rooted stock. Stock is Froyo and CM10 is Jellybean. Three Android generations ahead.
Sent with XDA Premium from my Nook HD+ running CM10 on SD

fantastic information! thx.
Thanks for all of this, amazing what you've put together.
leapinlar said:
First, just because Play Store says an app is incompatible does not mean it will not run. It just means they will not let you install it. So you have to get it somewhere else, like the Amazon Store, 1Mobile Store or somewhere else.
Second, you can easily update to 1.4.3 using CWM. See my NC tips thread linked in my signature. See item A15.
And the reason your device got stuck in a bootloop is because you replaced your stock recovery with CWM. See my item A12.
And CM10 is head and shoulders above NC stock, even rooted stock. Stock is Froyo and CM10 is Jellybean. Three Android generations ahead.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse

Returning to CM7 and Nook won't access Market

Hello XDA peeps.
I've had my Nook color for about 3+ years. Have had both my wife and mine running old versions of CM7 on the SD card without issue.
I recently dug mine out to set up for the kids (for a trip we're taking starting this weekend) and first installed CM10 (10.3 I think). loaded and was able to get apps running w/o issue but the poor old Nook and CM10 was so sluggish I felt it was just too much for this legacy device, so I reflashed to the CM7.2.0 [stable]
loaded just fine, but when I went to install GAPPS it installed fine, but will not allow me to access my account now.
no matter how many times I try, it tells me the password does not match for my account.
I know for a fact the password is the right one, and I can get on the Play store just fine on my Galaxy S3 using the same credentials.
I even reflashed the GAPPS to an older version and no luck.
Any thoughts? Really stuck here, since we're leaving Saturday morning and I want to have both Nooks up and running current versions of our boys fav games to pass the time. right now it has no app store, so it's pretty much a stripped Android tablet.

~poz said:
Hello XDA peeps.
I've had my Nook color for about 3+ years. Have had both my wife and mine running old versions of CM7 on the SD card without issue.
I recently dug mine out to set up for the kids (for a trip we're taking starting this weekend) and first installed CM10 (10.3 I think). loaded and was able to get apps running w/o issue but the poor old Nook and CM10 was so sluggish I felt it was just too much for this legacy device, so I reflashed to the CM7.2.0 [stable]
loaded just fine, but when I went to install GAPPS it installed fine, but will not allow me to access my account now.
no matter how many times I try, it tells me the password does not match for my account.
I know for a fact the password is the right one, and I can get on the Play store just fine on my Galaxy S3 using the same credentials.
I even reflashed the GAPPS to an older version and no luck.
Any thoughts? Really stuck here, since we're leaving Saturday morning and I want to have both Nooks up and running current versions of our boys fav games to pass the time. right now it has no app store, so it's pretty much a stripped Android tablet.
Click to expand...
Click to collapse
You said you were running CM7 on SD. How did you install the CM10? Then what did you do to get back to CM7? What wiping did you do?
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
You said you were running CM7 on SD. How did you install the CM10? Then what did you do to get back to CM7? What wiping did you do?
Click to expand...
Click to collapse
I actually have the CM10 on the root of the device. I thought I had put it on the SD card, but didn't. (just found this out by accidentally powering on the tablet w/o the card in it)
So, currently downloading the CM 10.2.1 update (from 10.1.3), and perhaps it will fix the sluggishness.
I have a third stock Nook that I have not touched in years that I'm going to flash on the SD card...see if I can't get it to CM7.2 w/o any issues.
but previously I had wiped the card twice and attempted to Reinstall CM7.2.
I think the fault lies in the steps I was following to burn the SD card.
Told me to add the gapps AFTER installing CM7
I was pretty sure in the past I put both on the same SD at the same time.
or it is possible the Google two-step verification/authorization is not compatible with the older Market app. I can get on the Play store just fine on CM10 (but it did have me open in the browser to verify the device).

~poz said:
I actually have the CM10 on the root of the device. I thought I had put it on the SD card, but didn't. (just found this out by accidentally powering on the tablet w/o the card in it)
So, currently downloading the CM 10.2.1 update (from 10.1.3), and perhaps it will fix the sluggishness.
I have a third stock Nook that I have not touched in years that I'm going to flash on the SD card...see if I can't get it to CM7.2 w/o any issues.
but previously I had wiped the card twice and attempted to Reinstall CM7.2.
I think the fault lies in the steps I was following to burn the SD card.
Told me to add the gapps AFTER installing CM7
I was pretty sure in the past I put both on the same SD at the same time.
or it is possible the Google two-step verification/authorization is not compatible with the older Market app. I can get on the Play store just fine on CM10 (but it did have me open in the browser to verify the device).
Click to expand...
Click to collapse
I don't think CM10.2 is going to help. CM7 is the best for NC. I would wipe the internal CM10 you have on there and install CM7 to internal. Be sure to put the right gingerbread gapps on there too.
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
I don't think CM10.2 is going to help. CM7 is the best for NC. I would wipe the internal CM10 you have on there and install CM7 to internal. Be sure to put the right gingerbread gapps on there too.
Click to expand...
Click to collapse
yes, thank you. I feel anything higher than CM7 just boggs the processor on these dated tablets. For a kids' tablet, it's just fine and will run most of their games/books and it remains snappy. CM10 just feels overloaded. It is sluggish and slow to respond. I'll try to get it moved back to CM7.
I've been trying to flash the other Nook, but after much effort, I have not been able to get it to boot into recovery.
I have the same card set-up, but I cannot get it to start with the card....constantly goes to the B&N root.

~poz said:
I've been trying to flash the other Nook, but after much effort, I have not been able to get it to boot into recovery.
I have the same card set-up, but I cannot get it to start with the card....constantly goes to the B&N root.
Click to expand...
Click to collapse
Sometimes it is difficult to get the NC to boot from an SD. See my NC Tips thread linked in my signature and read section A9.
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
Sometimes it is difficult to get the NC to boot from an SD. See my NC Tips thread linked in my signature and read section A9.
Click to expand...
Click to collapse
Thanks Leapinlar,
Still running into issues. now on BOTH Nooks.
I was pretty sure I remember something about an updated B&N ROM that was signaled with a Green sticker on the box, which the troublesome boot one has.
I am using the generic_sdcard_v1.3.img + cm-7.2.0-encore.zip + gapps-gb-20110828-signed.zip all being burned via Terminal on Mac.
The only thing that has changed since I was dabbling with these in the past was the CM release.
I am not able to find my original bookmark of the tutorial I used to use (2+ years ago) so I think there might be a flaw in the instructions I'm following now. (for instance, the instructions I'm following now, the dd= command isn't proceeded by 'sudo' and without the sudo command, it errors out when trying to write the generic SD image to the disc (says disc is not available or locked).
gonna keep trying, because I want to get these up and working for our trip...we have 36+ hours of driving over the course of a week, so I know they'll get bored of looking at sights, reading books, watching DVDs, etc. Mainly for my own sanity, since I'll be driving.
**EDIT* i found the original tutorial I used years ago in my trove of bookmarks. It was the original GlassKeys tutorial. gonna give that a shot and report back with my success/errors.

Well, one thing, if you are going to use that old original image file you need to rename the CM zip to begin with update-. That will not help with the booting issue, but will make it so that image will recognize the CM zip.
I have an updated image zip in my updated instructions for NC SD installs linked in my signature.
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
Well, one thing, if you are going to use that old original image file you need to rename the CM zip to begin with update-. That will not help with the booting issue, but will make it so that image will recognize the CM zip.
I have an updated image zip in my updated instructions for NC SD installs linked in my signature.
Click to expand...
Click to collapse
Thanks. should have mentioned that I did rename the file to "update"
got my old CM10 to boot into Linux penguin and it seemed to be doing it's thing, after formatting the SD card following the GlassKeys instructions, but it is now booting to CM10 still by default and if I hold the "n" key for the boot menu on Cyanoboot and try to boot from SD card (normal or recovery) it just stays on that screen until I power it down.
as for the second, untouched Nook, I did the GlassKeys instructions to the SD card for that and it loaded to Penguin and went through all the install procedures, but now it still boots to the B&N emm setup screen.
wish I had never taken the other to CM10. now I have two Nooks that aren't acting properly.
thing that bugs me is the first one was running fine, just market wouldn't recognize my sign-in...now both are jacked.:silly:

SUCCESS!!!
So thank you goes out to leapinlar!!!
I dropped what I had been doing on my system as far as the files I was burning and read over all your FAQ and tutorial.
I downloaded the files in your how-to and had the tricky OE ROM flashed in a jiff!
The second one is installing now on the peguin screen and JUST now loaded to the CM7.2 bootloader screen.
Still used the GlassKeys instrucitons on how to burn via Terminal on OS X, but used your files (generic-sdcard-v1.3-CM7-9-10-10.1-10.2-11-largest-Rev8c.zip )
My original issue, I have found through all this, was that the Market wouldn't allow me to sign in...well that is an issue with the 2-step verification for my Google account I had activated (someone tried to hack my account, so I had it on). Once I turned it off, I was able to open the market and sign in.
Thanks again for your help leapinlar....check this one off!
Going to update both tonight with our boys' fav apps and games and get ready to hit the road first thing Sat morning! :laugh:

If you want something newer I found that cm10.0 was pretty fast on nook color. Better than cm7. Anything newer I also found was to slow and laggy 10.1+. If interested the last nightly cm10.0 rom and gapps are over in the development fourm.

retrobot said:
If you want something newer I found that cm10.0 was pretty fast on nook color. Better than cm7. Anything newer I also found was to slow and laggy 10.1+. If interested the last nightly cm10.0 rom and gapps are over in the development fourm.
Click to expand...
Click to collapse
Thanks! but pretty happy with CM7. any more seems to be a bit much for these processors. both are up, loaded full of games/books and ready for the road trip. :highfive: