Related
Just rooted my phone and downloaded SetCPU.
Anyone had any problems with this? The app is only able to view the "read" part of the CPU and not the "write" so I don't think its actually doing anything. Its got the warning that some features wont work. Anyway to make it work?
Cheers.
Chris_ZS said:
Just rooted my phone and downloaded SetCPU.
Anyone had any problems with this? The app is only able to view the "read" part of the CPU and not the "write" so I don't think its actually doing anything. Its got the warning that some features wont work. Anyway to make it work?
Cheers.
Click to expand...
Click to collapse
Are you using an overclockable kernel?
Not that I know of,
I've rooted with unrevoked and i've downloaded the app.
Only thing i'm looking to do is overclock my phone and that was how I thought I would be able to go about doing it.
Any tips?
Sounds like you didnt give it access when it asked for it when it has that count down timer i think you press allow and it should then be fine but when i didnt press allow it gave the same error your complaining about
When I installed the app I allowed it access to my phone.
reinstalled and allowed and still having the same problem :S
its only the write: min frequency and max frequency
that the app doesn't have access to, I can't use the sliders to change the performance.
You can't overclock if you didn't flash the overclock kernel...
how do you do flash the overclock kernal?
Go to the rom development sub forum and flash jacobs kernel.
kevin2516 said:
Go to the rom development sub forum and flash jacobs kernel.
Click to expand...
Click to collapse
Yeah, I've looked at that, but theres no guide anywhere to let me know how to flash it. Is it a simple thing like rooting? Or is it a little more in depth?
Anyone know of a guide?
Chris_ZS said:
Yeah, I've looked at that, but theres no guide anywhere to let me know how to flash it. Is it a simple thing like rooting? Or is it a little more in depth?
Anyone know of a guide?
Click to expand...
Click to collapse
Download it, reboot into recovery and flash it... If you can't understand how to flash, i don't know why you should be doing this. There are guides all over this subforum and the rom development forum.
New FW 4.0.2.A.0.79 R800
+
[KERNEL][PLAY] LuPuSv6-GB [STOCK-GB][LINARO][UPDATED 04-01-13]
+
Overclocking CPU to 1.4GHz with these settings: smartassV2, sio and 2048
+
Removing bloatwares ( Cannot specify coz It depends on your needs. For me I removed a lot )
+
[MOD] CrossBreeder-Sharp reductions in GUI and DNS lag-Frandom support!!-10-Feb-2013
=
The heaviest android games (aka Modern Combat 4, The Dark Knight Rises, GTA: Vice City and Wild Blood) run smoothly without any smell of lag :fingers-crossed:
+
Statusbar Widget ,you can choose which widget and change the order now!!
And where's the crossbreeder.zip?? Cant find it on thread.
Regards,
Sdojoin
just asking . the new fw got its own kernel right because it must be flash through flashtool . so how do you change the kernel to lupus kernel ?
sdojoin said:
And where's the crossbreeder.zip?? Cant find it on thread.
Regards,
Sdojoin
Click to expand...
Click to collapse
Never heard of crossbreeder before but I'm wondering the same thing. I see the uninstall.zip (which I assume removes the crossbreeder), but don't see the actual zip file for it
Sent from my R800i using xda-developers app.
It's nice to be important, but it's more important to be nice.
Idk. Op mind upload it here??
Edit; Haveged & Urandom enabler flashable .zip
- HERE
Sorry if i'm hijacking this thread. Mybe u're bz with smthing. So figure i do it my self. Dont know if the zip work though. Let me know after flashing.
To check just try run the init.d script via SManager & see the output.
Regards,
Sdojoin
sdojoin said:
And where's the crossbreeder.zip?? Cant find it on thread.
Regards,
Sdojoin
Click to expand...
Click to collapse
UndisputedGuy said:
Never heard of crossbreeder before but I'm wondering the same thing. I see the uninstall.zip (which I assume removes the crossbreeder), but don't see the actual zip file for it
Sent from my R800i using xda-developers app.
It's nice to be important, but it's more important to be nice.
Click to expand...
Click to collapse
sdojoin said:
Idk. Op mind upload it here??
Regards,
Sdojoin
Click to expand...
Click to collapse
He is working on a new release, it's better to wait for it, but if you insist, here is a link to the current release
http://www.mediafire.com/?4crbdo338xzh4zh
And don't forget to read the notes he wrote:
Please upgrade even if you're happy with a prior version as there are some prospective issues with continuous debuggerd restart on prior versions which can result in your phone doing more work than necessary.
It is recommended to uninstall a prior version by flashing the attached uninstall ZIP before flashing the latest version.
Click to expand...
Click to collapse
I think its best to stick with the simple 1. The haveged & the move random to urandom. That seems harmless to all.
Thanks for suggesting. It gav me the idea.
Regards,
Sdojoin
kurosaki99 said:
just asking . the new fw got its own kernel right because it must be flash through flashtool . so how do you change the kernel to lupus kernel ?
Click to expand...
Click to collapse
It's easy, after flashing the new fw, I downloaded and flashed lupus kernel using command "fastboot flash boot boot.img"
watow are
Any reason to use .79 instead of .58 enhanced?
Any reason to use smartassV2 instead of improved Virtuous in Lupus kernel?
What about SD-card speed and Supercharged?
D.Spirit said:
It's easy, after flashing the new fw, I downloaded and flashed lupus kernel using command "fastboot flash boot boot.img"
Click to expand...
Click to collapse
Oh , i see . I thought changing the kernel would cause a bootloop
JockeII said:
Any reason to use .79 instead of .58 enhanced?
Any reason to use smartassV2 instead of improved Virtuous in Lupus kernel?
What about SD-card speed and Supercharged?
Click to expand...
Click to collapse
1) .79 is the newest FW.
2) I don't have knowledge about governers, so I just set the same settings that I read in members' signatures. :cyclops:
3)I don't know how to get my phone supercharged as that thread is very messy and ununderstandable. :crying:
kurosaki99 said:
Oh , i see . I thought changing the kernel would cause a bootloop
Click to expand...
Click to collapse
Nope, the Lupus kernel I used is compatible with any GB ROM. (but the bootloader must be unlocked)
Here's a question.
and yes, I did read most of the A500 stuff before posting this.
I currently have CyanogenMod V 10.2, and a 4.2.2 kernel
Here's my question. I see in the recovery rom, an option to overclock.
how can I do this from inside the normal kernel? is there an option I just haven't seen?
I understand it needs to be be done inside the rom, but seriously, haven't seen any discussion on how to get this running on a regular basis.
thanks in advance
markbnj said:
Here's a question.
and yes, I did read most of the A500 stuff before posting this.
I currently have CyanogenMod V 10.2, and a 4.2.2 kernel
Here's my question. I see in the recovery rom, an option to overclock.
how can I do this from inside the normal kernel? is there an option I just haven't seen?
I understand it needs to be be done inside the rom, but seriously, haven't seen any discussion on how to get this running on a regular basis.
thanks in advance
Click to expand...
Click to collapse
Why not make it easy, download and install SetCpu or any one of the multitude of OC apps on the market, and just set your OC/UV from there? You can select "set at boot" and it will retain your selections in the event of a re-boot.
Not all kernels are capable of OC/UV. This is all dependant on if the dev compiled the kernel with the correct frequency and voltage tables to allow this.
The fact that the CWM recovery has options, has 0 impact if the OC can be done. The OC option is in every recent CWM recovery version regardless of kernel being installed.
So my advice, download and install an OC app from play store, and check if your kernel supports it.
One more bit of advice... do not select "set at boot" until you have checked out your OC/UV settings.
MD
Thank you very much. dumb Xnix person that I am, didn't think to check if there were any apps like that. will investigate.
markbnj said:
Thank you very much. dumb Xnix person that I am, didn't think to check if there were any apps like that. will investigate.
Click to expand...
Click to collapse
There are a ton of free apps. System Tuner, NoThrills, PimpmyCPU, etc. Personally, I like SetCpu (free version here at XDA, use search), and System Tuner.
Hello xda.
I installed Cyanogenmod on my Samsung Galaxy Note 3 today with no problems at all, however I've found something that seems a bit weird. (I know there is supposed to be bugs in nightlies, of course, but I thought i'd ask anyway.)
In the performance settings of the tab, it keeps the minimum CPU frequency to 1190mhz. If I put it to 300mhz, it will work, but as soon as I exit out of the performance tab, it goes back to 1190mhz. I figured that my phone was quite hot when I didn't use it, and that's how I found out.
Have anyone seen this on the latest CM11 nightly for the Note 3? I hope somebody out there know how I can fix it.
Many thanks.
TjabbyD said:
Hello xda.
I installed Cyanogenmod on my Samsung Galaxy Note 3 today with no problems at all, however I've found something that seems a bit weird. (I know there is supposed to be bugs in nightlies, of course, but I thought i'd ask anyway.)
In the performance settings of the tab, it keeps the minimum CPU frequency to 1190mhz. If I put it to 300mhz, it will work, but as soon as I exit out of the performance tab, it goes back to 1190mhz. I figured that my phone was quite hot when I didn't use it, and that's how I found out.
Have anyone seen this on the latest CM11 nightly for the Note 3? I hope somebody out there know how I can fix it.
Many thanks.
Click to expand...
Click to collapse
try set cpu app or use temask kernel found here http://forum.xda-developers.com/showthread.php?t=2687074&page=3
jaythenut said:
try set cpu app or use temask kernel found here http://forum.xda-developers.com/showthread.php?t=2687074&page=3
Click to expand...
Click to collapse
Thanks a lot for your reply.
I've heard a little about kernels. The thing is, that this is the first time I've ever put a custom rom on an android device, so I'm not really 100% familiar with all this yet, however if the custom kernel won't be able to brick my phone, I sure would give that a try.
Should I go with the "stable" version or the beta version of the kernel?
TjabbyD said:
Thanks a lot for your reply.
I've heard a little about kernels. The thing is, that this is the first time I've ever put a custom rom on an android device, so I'm not really 100% familiar with all this yet, however if the custom kernel won't be able to brick my phone, I sure would give that a try.
Should I go with the "stable" version or the beta version of the kernel?
Click to expand...
Click to collapse
go with beta its very stable just flash with cmw or twrp and dont touch anything
jaythenut said:
go with beta its very stable just flash with cmw or twrp and dont touch anything
Click to expand...
Click to collapse
Thank you a lot
I'm taking the beta version then!
- So... I just tried to flash it with Odin, but as it is a .zip file and not .tar, I can't do that.
I do have TWRP on my device, so I can use that, I am not very sure on how to do that though?
I'm sorry for the noobish questions. First time I installed a custom rom
TjabbyD said:
Thank you a lot
I'm taking the beta version then!
- So... I just tried to flash it with Odin, but as it is a .zip file and not .tar, I can't do that.
I do have TWRP on my device, so I can use that, I am not very sure on how to do that though?
I'm sorry for the noobish questions. First time I installed a custom rom
Click to expand...
Click to collapse
go to twrp then install zip find the kernel press it it will install then reboot should be good to go do a backup just in case
jaythenut said:
go to twrp then install zip find the kernel press it it will install then reboot should be good to go do a backup just in case
Click to expand...
Click to collapse
That sounds amazing!
Thanks for your help man I appreciate it!
So, just to be 100% sure, I am going to download and install the "NEW BETA KERNEL v3.02 b1" Right?
TjabbyD said:
That sounds amazing!
Thanks for your help man I appreciate it!
So, just to be 100% sure, I am going to download and install the "NEW BETA KERNEL v3.02 b1" Right?
Click to expand...
Click to collapse
yes mate
you should try his rom its one of the best cm roms out there
jaythenut said:
yes mate
you should try his rom its one of the best cm roms out there
Click to expand...
Click to collapse
Yeah I've heard a lot about his ROM too, I should have installed that instead of the official nightly, oh well. Perhaps I will soon
I really appreciate your help. On to install the kernel now! Hopefully I will get as amazing battery life as the show
TjabbyD said:
Yeah I've heard a lot about his ROM too, I should have installed that instead of the official nightly, oh well. Perhaps I will soon
I really appreciate your help. On to install the kernel now! Hopefully I will get as amazing battery life as the show
Click to expand...
Click to collapse
you can just flash over the top with out loosing any data
jaythenut said:
you can just flash over the top with out loosing any data
Click to expand...
Click to collapse
Oh really? How?
Just the regular way of installing a rom or?
TjabbyD said:
Oh really? How?
Just the regular way of installing a rom or?
Click to expand...
Click to collapse
download rom on your phone flash it with twrp then flash the same gapps with twrp (must be the same gapps or it will factory reset)
thats it done
sembuild articles
jaythenut said:
download rom on your phone flash it with twrp then flash the same gapps with twrp (must be the same gapps or it will factory reset)
thats it done
Click to expand...
Click to collapse
That's amazing! I'll see if I will do that soon.
I installed the kernel and everything looks fine, however the performance tab is still acting weird. I think I will install a CPU app.
So this is it? There is no new settings I need to check or anything?
TjabbyD said:
That's amazing! I'll see if I will do that soon.
I installed the kernel and everything looks fine, however the performance tab is still acting weird. I think I will install a CPU app.
So this is it? There is no new settings I need to check or anything?
Click to expand...
Click to collapse
nope dont use performance tab at all use this app if you want to play with this settings
Trickser settings
Eco mode - off
MP-Decision - off
Intelli-plugin - on
Dynamic Fsync - on
Governor - Intelli-demand
Scheduler - row
https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=en_GB
jaythenut said:
nope dont use performance tab at all use this app if you want to play with this settings
Trickser settings
Eco mode - off
MP-Decision - off
Intelli-plugin - on
Dynamic Fsync - on
Governor - Intelli-demand
Scheduler - row
https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=en_GB
Click to expand...
Click to collapse
Got everything set up and running now!
Thanks a lot for your help mate! I really appreciate your time!
Now I "hopefully" will have amazing battery life just like the other people in the thread!
Hey everyone,
I found this kernel in a Spanish forum for the Peregrine and installed on my xt1040 Moto G.
Other than compatibility issues, I have a question;
How long does installing a Kernel usually take? I believe I've been waiting at the Moto boot screen for 30 minutes or so, and the screen has dimmed to off, but it's still waiting.
I've been reading that it can take up to 10 minutes to flash a kernel zip. But this is much longer.
Can anyone tell me how long this should take?
Thanks a million!
im a falcon user and usually kernel flashibg takes about 30 seconds or less. there might be something wrong with whatever youre doing
OldYellowBricks said:
im a falcon user and usually kernel flashibg takes about 30 seconds or less. there might be something wrong with whatever youre doing
Click to expand...
Click to collapse
Thank's for your reply!
Here is a link for anyone interested http://www.darksideteam.com/Tema-KERNEL-DECEPTICON-KERNEL-PEREGRINE-STOCK-rev1-v-14p-07-09-14
I have Unlocked my bootloader, Rooted, installed ROMs, and still cant seem to get a custom kernel to work. I had the same problems with my HTC One S..all of the kernel zips would install but hang at the boot logo.
Can anyone tell me what I'm doing wrong for it not to work? I could never seem to get kernels to install on ANY phone. I waited about 50 minutes and nothing happened so I just installed cm11 again.
I have a peregrine xt1040 moto g lte.
Sailor spinach said:
I have Unlocked my bootloader, Rooted, installed ROMs, and still cant seem to get a custom kernel to work. I had the same problems with my HTC One S..all of the kernel zips would install but hang at the boot logo.
Can anyone tell me what I'm doing wrong for it not to work? I could never seem to get kernels to install on ANY phone. I waited about 50 minutes and nothing happened so I just installed cm11 again.
I have a peregrine xt1040 moto g lte.
Click to expand...
Click to collapse
You're not using stock rom right?
me_is_rushin said:
You're not using stock rom right?
Click to expand...
Click to collapse
I'm using cm11.
Sailor spinach said:
... so I just installed cm11 again.
I have a peregrine xt1040 moto g lte.
Click to expand...
Click to collapse
Did you revert back to stock before flashing the kernel ?
Because it is a kernel made for stock rom, so with any CM11 based rom, it will not boot.
I tried yesterday the last kernel and it did work for me.
(4.4.4 eu stock)
Oh, thanks for the tip! I'm going to go back to stock and try the kernel again. Right?
Awesome!
SO this works for me now! Thanks for the info
I just did a stock recovery and flashed and it was flawless .
Woo Peregrine
Glad to hear you managed to get it working.
Btw, did you try the "synapse" app?
In the original thread the creator of this kernel tells us to use this app to tweak the kernel, but it always FC for me, i had to use trickster mod, is it the same thing for you ?
J0kker said:
Glad to hear you managed to get it working.
Btw, did you try the "synapse" app?
In the original thread the creator of this kernel tells us to use this app to tweak the kernel, but it always FC for me, i had to use trickster mod, is it the same thing for you ?
Click to expand...
Click to collapse
Originally I was using Trickster Mod but after reading your post I tried Synapses.
Both work fine for me, Tickster Mod has quite a few options but Synapses has more.
As for the FC, I'm not sure what could be wrong. Try some fresh installs and see if you get it working. I know...Pain In The Ass!!! That or you could just use Trickster and not set as many peramiters.
Good day lads.
New member to XDA, but i've been reading this forum alot.
I sent my Z2 for DOA swap and got Moto G 4G XT1039 for the time. I unlocked it, rooted and installed Decepticon. I would have used Faux123's kernel, but could not find it for Peregrine.
Now i installed Synapse and i'm asking you guys if you could share your settings.
Thanks in advance!
Sailor spinach said:
Originally I was using Trickster Mod but after reading your post I tried Synapses.
Both work fine for me, Tickster Mod has quite a few options but Synapses has more.
As for the FC, I'm not sure what could be wrong. Try some fresh installs and see if you get it working. I know...Pain In The Ass!!! That or you could just use Trickster and not set as many peramiters.
Click to expand...
Click to collapse
Thank you for the advice ! I did not know 'synapse'
Do faux sound and sweep2wake actually work?
Does the kernel affect the memory usage? Will I be able to have a music app like poweramp while web browsing with something like naked browser? Sorry for posting so many questions but I'd rather know these things before I spend money on a device that many not do what I need.
This is a great kernel, very good one.
Gobiastard said:
Good day lads.
New member to XDA, but i've been reading this forum alot.
I sent my Z2 for DOA swap and got Moto G 4G XT1039 for the time. I unlocked it, rooted and installed Decepticon. I would have used Faux123's kernel, but could not find it for Peregrine.
Now i installed Synapse and i'm asking you guys if you could share your settings.
Thanks in advance!
Click to expand...
Click to collapse
For Synapse settings, all I really change it the CPU Governor and Min/Max CPU MHZ.
MIN/MAX CPU - 192mhz to 1305mhz
And Governor to Performance or intellidemand, but with both I don't notice much change.
stable and lag free. I was getting crashes using TricksterMod but not with Synapse for some reason.
blcistheking said:
Do faux sound and sweep2wake actually work?
Does the kernel affect the memory usage? Will I be able to have a music app like poweramp while web browsing with something like naked browser? Sorry for posting so many questions but I'd rather know these things before I spend money on a device that many not do what I need.
Click to expand...
Click to collapse
s2w doesn't seem to work for me. neither does UV but they are listed as features on the kernel's main post at thedarksideteam in their newest version. Not really sure when they will actually have them working.
Can someone post a link to the kernel download. I dont speak/read spanish and cant seem to locate the download. kind of frustrating as this seems to be the only custom moto g lte kernel out.
dancingtortoise said:
Can someone post a link to the kernel download. I dont speak/read spanish and cant seem to locate the download. kind of frustrating as this seems to be the only custom moto g lte kernel out.
Click to expand...
Click to collapse
I don't speak or read Spanish either, but with the help of Google translate you should be able to understand it for the most part [emoji16]
The kernel description is translated in English, so no biggie there. You do have to register before being able to download, but Google translate can help you there also.
The kernel is really worth the hassle though!
http://www.darksideteam.com/Tema-KE...PEREGRINE-STOCK-rev1-v-23p-30-09-14?pid=26759
And go from there... [emoji106]
Verstuurd vanaf mijn XT1039 met Tapatalk
As i'm new user, i'm not allowed to post links to websites... But you can find all Decepticon kernels here:
(removed direct link to kernels)